Shaunak Saha (shaunak.saha@intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15556
-gerrit
commit 2b417c0eea424662d37b059cbe0d4113be1ba6e6 Author: Shaunak Saha shaunak.saha@intel.com Date: Wed Jul 6 15:50:48 2016 -0700
google/reef: GPE routing settings for reef board
This patch sets the devicetree for gpe0_dw configuration and also confgigures the GPIO lines for SCI.EC_SCI_GPI is configured to proper value.
BUG = chrome-os-partner:53438 TEST = Toggle pch_sci_l from ec console using gpioset command and see that the sci counter increases in /sys/firmware/acpi/interrupt and also 9 in /proc/interrupt
Change-Id: If258bece12768edb1e612c982514ce95c756c438 Signed-off-by: Shaunak Saha shaunak.saha@intel.com --- src/mainboard/google/reef/devicetree.cb | 9 +++++++++ src/mainboard/google/reef/ec.h | 8 +++++--- src/mainboard/google/reef/gpio.h | 2 +- 3 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/src/mainboard/google/reef/devicetree.cb b/src/mainboard/google/reef/devicetree.cb index e0831f4..7f6d189 100644 --- a/src/mainboard/google/reef/devicetree.cb +++ b/src/mainboard/google/reef/devicetree.cb @@ -36,6 +36,15 @@ chip soc/intel/apollolake # 0x1C[6:0] stands for 28*125 = 3500 pSec delay for HS200 register "emmc_rx_cmd_data_cntl2" = "0x1001C"
+ # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route, i.e., If this route changes then the affected GPE + # offset bits also needs to be changed. This sets the PMC register + # GPE_CFG fields. + register "gpe0_dw1" = "PMC_GPE_N_31_0" + register "gpe0_dw2" = "PMC_GPE_N_63_32" + register "gpe0_dw3" = "PMC_GPE_SW_31_0" + device domain 0 on device pci 00.0 on end # - Host Bridge device pci 00.1 on end # - DPTF diff --git a/src/mainboard/google/reef/ec.h b/src/mainboard/google/reef/ec.h index 5a32697..3619c04 100644 --- a/src/mainboard/google/reef/ec.h +++ b/src/mainboard/google/reef/ec.h @@ -18,9 +18,11 @@
#include <ec/google/chromeec/ec_commands.h>
-/* This is the GPE status bit. - TODO: Fix this to proper bit matching GPE routing table */ -#define EC_SCI_GPI 15 +/* + * GPIO_11 for SCI is routed to GPE0_DW1 and maps to group GPIO_GPE_N_31_0 + * which is North community + */ +#define EC_SCI_GPI GPE0_DW1_11
#define MAINBOARD_EC_SCI_EVENTS \ (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ diff --git a/src/mainboard/google/reef/gpio.h b/src/mainboard/google/reef/gpio.h index 91e8bb1..eddefeb 100644 --- a/src/mainboard/google/reef/gpio.h +++ b/src/mainboard/google/reef/gpio.h @@ -283,7 +283,7 @@ static const struct pad_config gpio_table[] = {
PAD_CFG_GPI_APIC(GPIO_9, NONE, DEEP, LEVEL, NONE), /* dTPM IRQ */ PAD_CFG_GPI(GPIO_10, UP_20K, DEEP), /* unused */ - PAD_CFG_GPI_SCI(GPIO_11, NONE, DEEP, LEVEL, NONE), /* EC SCI */ + PAD_CFG_GPI_SCI(GPIO_11, NONE, DEEP, EDGE_SINGLE, INVERT), /* EC SCI */ PAD_CFG_GPI(GPIO_12, UP_20K, DEEP), /* unused */ PAD_CFG_GPI(GPIO_13, UP_20K, DEEP), /* unused */ PAD_CFG_GPI_APIC(GPIO_14, UP_20K, DEEP, LEVEL, NONE), /* FP IRQ */
-
Shaunak Saha