Urja Rannikko (urjaman@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12350
-gerrit
commit b144a99c115a3ffe037275d0928d8a12858b63d0 Author: Urja Rannikko urjaman@gmail.com Date: Thu Nov 5 18:43:52 2015 +0200
asus/k8v-x: Add PIRQ tables to init PCI IRQ config
Pulled getpir from the attic and used data provided by it to create the table a bit more programmatically and added the AGP slot so the video card is given an IRQ
Change-Id: Id3dc1a77ac6382405f5f36707994287e84e1168b Signed-off-by: Urja Rannikko urjaman@gmail.com --- src/mainboard/asus/k8v-x/Kconfig | 6 ++ src/mainboard/asus/k8v-x/irq_tables.c | 146 ++++++++++++++++++++++++++++++++++ 2 files changed, 152 insertions(+)
diff --git a/src/mainboard/asus/k8v-x/Kconfig b/src/mainboard/asus/k8v-x/Kconfig index 52bf661..4eb1bec 100644 --- a/src/mainboard/asus/k8v-x/Kconfig +++ b/src/mainboard/asus/k8v-x/Kconfig @@ -9,12 +9,14 @@ config BOARD_SPECIFIC_OPTIONS # dummy select SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD select SUPERIO_WINBOND_W83697HF select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE select HAVE_ACPI_TABLES select HAVE_MP_TABLE select BOARD_ROMSIZE_KB_512 select RAMINIT_SYSINFO select SET_FIDVID select K8_FORCE_2T_DRAM_TIMING + select PIRQ_ROUTE
config MAINBOARD_DIR string @@ -60,4 +62,8 @@ config HT_CHAIN_UNITID_BASE hex default 0x0
+config IRQ_SLOT_COUNT + int + default 11 + endif # BOARD_ASUS_K8V_X diff --git a/src/mainboard/asus/k8v-x/irq_tables.c b/src/mainboard/asus/k8v-x/irq_tables.c new file mode 100644 index 0000000..51b7dd1 --- /dev/null +++ b/src/mainboard/asus/k8v-x/irq_tables.c @@ -0,0 +1,146 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Urja Rannikko urjaman@gmail.com + * + * Code based on KFSN4-DRE irq_tables.c: + * Copyright (C) 2015 Timothy Pearson tpearson@raptorengineeringinc.com, Raptor Engineering + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de + * (Thanks to LSRA University of Mannheim for their support) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, + uint8_t devfn, uint8_t link0, uint8_t link1, uint8_t link2, + uint8_t link3, uint8_t slot, uint8_t rfu) +{ + const uint16_t valid_irqs = 0xccb8; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = link0 ? valid_irqs : 0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = link1 ? valid_irqs : 0; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = link2 ? valid_irqs : 0; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = link3 ? valid_irqs : 0; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + uint8_t *v, sum = 0; + unsigned int slot_num = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr = ALIGN_UP(addr, 16); + + /* This table must be between 0xf0000 & 0x100000. */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + pirq->rtr_bus = 0; + pirq->rtr_devfn = ((0x11) << 3) | 0; + pirq->exclusive_irqs = 0; + pirq->rtr_vendor = PCI_VENDOR_ID_VIA; + pirq->rtr_device = PCI_DEVICE_ID_VIA_VT8237R_LPC; + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + + /* AGP Bridge. */ + write_pirq_info(pirq_info, 0, (0x01 << 3) | 0, 1, 2, 0, 0, 0, 0); + pirq_info++; + slot_num++; + + /* ISA Bridge + AC97 + MC97 */ + write_pirq_info(pirq_info, 0, (0x11 << 3) | 0, 0, 0, 3, 0, 0, 0); + pirq_info++; + slot_num++; + + /* PATA and SATA. */ + write_pirq_info(pirq_info, 0, (0x0f << 3) | 0, 1, 2, 3, 5, 0, 0); + pirq_info++; + slot_num++; + + /* USB (UHCI and EHCI) */ + write_pirq_info(pirq_info, 0, (0x10 << 3) | 0, 1, 2, 3, 5, 0, 0); + pirq_info++; + slot_num++; + + /* 5 PCI Slots */ + write_pirq_info(pirq_info, 0, (0x0b << 3) | 0, 1, 2, 3, 5, 1, 0); + pirq_info++; + slot_num++; + + write_pirq_info(pirq_info, 0, (0x0c << 3) | 0, 2, 3, 5, 1, 2, 0); + pirq_info++; + slot_num++; + + write_pirq_info(pirq_info, 0, (0x0d << 3) | 0, 3, 5, 1, 2, 3, 0); + pirq_info++; + slot_num++; + + write_pirq_info(pirq_info, 0, (0x0e << 3) | 0, 5, 1, 2, 3, 4, 0); + pirq_info++; + slot_num++; + + write_pirq_info(pirq_info, 0, (0x09 << 3) | 0, 1, 2, 3, 5, 5, 0); + pirq_info++; + slot_num++; + + /* Ethernet */ + write_pirq_info(pirq_info, 0, (0x0a << 3) | 0, 2, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; + + /* AGP Slot. */ + write_pirq_info(pirq_info, 1, (0x00 << 3) | 0, 1, 2, 0, 0, 6, 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) + pirq->checksum = sum; + + printk(BIOS_INFO, "done.\n"); + + /* Call copy for side effects: setting PCI IRQ registers. Hack? */ + return copy_pirq_routing_table(addr, pirq); +}
-
Urja Rannikko