Zhuohao Lee has uploaded this change for review. ( https://review.coreboot.org/27802
Change subject: mb/google/poppy/variants/rammus: revise rammus settings ......................................................................
mb/google/poppy/variants/rammus: revise rammus settings
The changes include: 1. Move the build board directory from poppy to rammus. 2. Add audio, gpio, memory and device tree configuration base on the proto board schematics. 3. IccMax is set to 28A because of the AML requirement, the AcLoadline and DcLoadline need to be fine tuned later. 4. The usb2_ports' parameter need to be fine tuned later. Currently, for the ports located on the mainboard, set it to USB2_PORT_SHORT. For the others on the daughterboard, set it to USB2_PORT_LONG.
BUG=b:111579386 BRANCH=Master TEST=Build pass.
Change-Id: Ibf147145619142f3989834e631eff5ff630b1443 Signed-off-by: Zhuohao Lee zhuohao@chromium.org --- M src/mainboard/google/poppy/Kconfig M src/mainboard/google/poppy/Kconfig.name A src/mainboard/google/poppy/variants/rammus/Makefile.inc A src/mainboard/google/poppy/variants/rammus/devicetree.cb A src/mainboard/google/poppy/variants/rammus/gpio.c A src/mainboard/google/poppy/variants/rammus/include/variant/acpi/dptf.asl A src/mainboard/google/poppy/variants/rammus/include/variant/ec.h A src/mainboard/google/poppy/variants/rammus/include/variant/gpio.h A src/mainboard/google/poppy/variants/rammus/memory.c A src/mainboard/google/poppy/variants/rammus/nhlt.c 10 files changed, 969 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/27802/1
diff --git a/src/mainboard/google/poppy/Kconfig b/src/mainboard/google/poppy/Kconfig index 06501f7..fc090df 100644 --- a/src/mainboard/google/poppy/Kconfig +++ b/src/mainboard/google/poppy/Kconfig @@ -30,6 +30,7 @@ default "variants/nami/devicetree.cb" if BOARD_GOOGLE_NAMI default "variants/nautilus/devicetree.cb" if BOARD_GOOGLE_NAUTILUS default "variants/nocturne/devicetree.cb" if BOARD_GOOGLE_NOCTURNE + default "variants/rammus/devicetree.cb" if BOARD_GOOGLE_RAMMUS default "variants/soraka/devicetree.cb" if BOARD_GOOGLE_SORAKA default "variants/baseboard/devicetree.cb"
@@ -86,6 +87,12 @@ select NHLT_DMIC_4CH select NHLT_MAX98373
+config INCLUDE_NHLT_BLOBS_RAMMUS + bool "Include blobs for rammus audio." + select NHLT_DA7219 + select NHLT_DMIC_4CH + select NHLT_MAX98927 + config MAINBOARD_DIR string default "google/poppy" @@ -129,7 +136,7 @@ default "nami" if BOARD_GOOGLE_NAMI default "nautilus" if BOARD_GOOGLE_NAUTILUS default "nocturne" if BOARD_GOOGLE_NOCTURNE - default "poppy" if BOARD_GOOGLE_RAMMUS + default "rammus" if BOARD_GOOGLE_RAMMUS default "soraka" if BOARD_GOOGLE_SORAKA
# Select this option to enable camera ACPI support on the variant. @@ -183,6 +190,13 @@ select VARIANT_HAS_CAMERA_ACPI select GEO_SAR_ENABLE if CHROMEOS_WIFI_SAR
+config VARIANT_SPECIFIC_OPTIONS_RAMMUS + def_bool n + select CHROMEOS_WIFI_SAR if CHROMEOS + select DRIVERS_I2C_MAX98927 + select DRIVERS_I2C_DA7219 + select MAINBOARD_HAS_SPI_TPM_CR50 + config VARIANT_SPECIFIC_OPTIONS_SORAKA def_bool n select DRIVERS_I2C_MAX98927 diff --git a/src/mainboard/google/poppy/Kconfig.name b/src/mainboard/google/poppy/Kconfig.name index 67f1870..c33d7fb 100644 --- a/src/mainboard/google/poppy/Kconfig.name +++ b/src/mainboard/google/poppy/Kconfig.name @@ -28,7 +28,7 @@ config BOARD_GOOGLE_RAMMUS bool "-> Rammus" select BOARD_GOOGLE_BASEBOARD_POPPY - select VARIANT_SPECIFIC_OPTIONS_POPPY + select VARIANT_SPECIFIC_OPTIONS_RAMMUS
config BOARD_GOOGLE_SORAKA bool "-> Soraka" diff --git a/src/mainboard/google/poppy/variants/rammus/Makefile.inc b/src/mainboard/google/poppy/variants/rammus/Makefile.inc new file mode 100644 index 0000000..eed7c44 --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/Makefile.inc @@ -0,0 +1,8 @@ +SPD_SOURCES = empty # 0b0000 + +bootblock-y += gpio.c + +romstage-y += memory.c + +ramstage-y += gpio.c +ramstage-y += nhlt.c diff --git a/src/mainboard/google/poppy/variants/rammus/devicetree.cb b/src/mainboard/google/poppy/variants/rammus/devicetree.cb new file mode 100644 index 0000000..d702bb9 --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/devicetree.cb @@ -0,0 +1,341 @@ +chip soc/intel/skylake + + # Deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # Enable DPTF + register "dptf_enable" = "1" + + # Enable S0ix + register "s0ix_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "1" + register "SaImguEnable" = "1" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "1" + register "VmxEnable" = "1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 2A | 2A | 2A | 2A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 4A | 28A | 24A | 24A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 15 | 5.7 | 5.5 | 5.5 | + #| DcLoadline | 14.3 | 4.83 | 4.2 | 4.2 | + #+----------------+-------+-------+-------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(4), + .voltage_limit = 1520, + .ac_loadline = 1500, + .dc_loadline = 1430, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(28), + .voltage_limit = 1520, + .ac_loadline = 570, + .dc_loadline = 483, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + .ac_loadline = 550, + .dc_loadline = 420, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(24), + .voltage_limit = 1520, + .ac_loadline = 550, + .dc_loadline = 420, + }" + + # Enable Root port 1. + register "PcieRpEnable[0]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[0]" = "1" + # RP 1 uses SRCCLKREQ1# + register "PcieRpClkReqNumber[0]" = "1" + # RP 1 uses uses CLK SRC 1 + register "PcieRpClkSrcNumber[0]" = "1" + # RP 1, Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[0]" = "1" + # RP 1, Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[0]" = "1" + + register "usb2_ports[0]" = "USB2_PORT_SHORT(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-A Port + register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 + register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # H1 + register "usb2_ports[8]" = "USB2_PORT_SHORT(OC_SKIP)" # Camera + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| I2C0 | Touchscreen | + #| I2C1 | Trackpad | + #| I2C5 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + .early_init = 1, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + }, + }" + + # Touchscreen + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" + + # Trackpad + register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" + + # Audio + register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSpi0] = PchSerialIoPci, + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, + [PchSerialIoIndexUart0] = PchSerialIoPci, + [PchSerialIoIndexUart1] = PchSerialIoDisabled, + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, + }" + + register "speed_shift_enable" = "1" + register "psys_pmax" = "45" + # PL2 override 18W for AML-Y + register "tdp_pl2_override" = "18" + register "tcc_offset" = "10" # TCC of 90C + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_E15" + + # PCH Trip Temperature in degree C + register "pch_trip_temp" = "75" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 on end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" # GPP_B5 + device i2c 15 on end + end + end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 on + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "vmon_slot_no" = "4" + register "imon_slot_no" = "5" + register "uid" = "0" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 39 on end + end + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "vmon_slot_no" = "6" + register "imon_slot_no" = "7" + register "uid" = "1" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 3A on end + end + end # I2C #5 + device pci 19.2 off end # I2C #4 + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_DW0_00" # GPP_B0 + device pci 00.0 on end + end + end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)" + device spi 0 on end + end + end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/google/poppy/variants/rammus/gpio.c b/src/mainboard/google/poppy/variants/rammus/gpio.c new file mode 100644 index 0000000..9fdb4cd --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/gpio.c @@ -0,0 +1,389 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +/* Pad configuration in ramstage */ +/* Leave eSPI pins untouched from default settings */ +static const struct pad_config gpio_table[] = { + /* A0 : RCIN# ==> NC(T0804) */ + PAD_CFG_NC(GPP_A0), + /* A1 : ESPI_IO0 */ + /* A2 : ESPI_IO1 */ + /* A3 : ESPI_IO2 */ + /* A4 : ESPI_IO3 */ + /* A5 : ESPI_CS# */ + /* A6 : SERIRQ ==> NC(T0805) */ + PAD_CFG_NC(GPP_A6), + /* A7 : PIRQA# ==> NC(T0501) */ + PAD_CFG_NC(GPP_A7), + /* A8 : CLKRUN# ==> NC(T0806) */ + PAD_CFG_NC(GPP_A8), + /* A9 : ESPI_CLK */ + /* A10 : CLKOUT_LPC1 ==> NC */ + PAD_CFG_NC(GPP_A10), + /* A11 : PME# ==> NC(T0913) */ + PAD_CFG_NC(GPP_A11), + /* A12 : BM_BUSY# ==> NC */ + PAD_CFG_NC(GPP_A12), + /* A13 : SUSWARN# ==> SUSWARN_L */ + PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), + /* A14 : ESPI_RESET# */ + /* A15 : SUSACK# ==> SUSACK_L */ + PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1), + /* A16 : SD_1P8_SEL ==> SD_PWR_1800_SEL */ + PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1), + /* A17 : SD_PWR_EN# ==> EN_SD_SOCKET_PWR_L */ + PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1), + /* A18 : ISH_GP0 ==> NC */ + PAD_CFG_NC(GPP_A18), + /* A19 : ISH_GP1 ==> NC */ + PAD_CFG_NC(GPP_A19), + /* A20 : ISH_GP2 ==> NC */ + PAD_CFG_NC(GPP_A20), + /* A21 : ISH_GP3 ==> NC */ + PAD_CFG_NC(GPP_A21), + /* A22 : ISH_GP4 ==> NC */ + PAD_CFG_NC(GPP_A22), + /* A23 : ISH_GP5 ==> NC */ + PAD_CFG_NC(GPP_A23), + + /* B0 : CORE_VID0 ==> WLAN_PCIE_WAKE_L */ + PAD_CFG_GPI_ACPI_SCI(GPP_B0, NONE, DEEP, INVERT), + /* B1 : CORE_VID1 ==> NC */ + PAD_CFG_NC(GPP_B1), + /* B2 : VRALERT# ==> NC */ + PAD_CFG_NC(GPP_B2), + /* B3 : CPU_GP2 ==> TRACKPAD_INT_L */ + PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST), + /* B4 : CPU_GP3 ==> NC */ + PAD_CFG_NC(GPP_B4), + /* B5 : SRCCLKREQ0# ==> TRACKPAD_INT_L for wakeup event */ + PAD_CFG_GPI_ACPI_SCI(GPP_B5, NONE, DEEP, INVERT), + /* B6 : SRCCLKREQ1# ==> WLAN_PCIE_CLKREQ_L */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : SRCCLKREQ2# ==> NC */ + PAD_CFG_NC(GPP_B7), + /* B8 : SRCCLKREQ3# ==> WLAN_PE_RST */ + PAD_CFG_GPO(GPP_B8, 0, DEEP), + /* B9 : SRCCLKREQ4# ==> NC */ + PAD_CFG_NC(GPP_B9), + /* B10 : SRCCLKREQ5# ==> NC */ + PAD_CFG_NC(GPP_B10), + /* B11 : EXT_PWR_GATE# ==> NC */ + PAD_CFG_NC(GPP_B11), + /* B12 : SLP_S0# ==> SLP_S0_L_G */ + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + /* B13 : PLTRST# ==> PLT_RST_L_PCH */ + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + /* B14 : SPKR ==> NC */ + PAD_CFG_NC(GPP_B14), + /* B15 : GSPI0_CS# ==> PCH_SPI_H1_3V3_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : GSPI0_CLK ==> PCH_SPI_H1_3V3_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : GSPI0_MISO ==> PCH_SPI_H1_3V3_MISO */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : GSPI0_MOSI ==> PCH_SPI_H1_3V3_MOSI */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + /* B19 : GSPI1_CS# ==> NC(T0807) */ + PAD_CFG_NC(GPP_B19), + /* B20 : GSPI1_CLK ==> NC(T0808) */ + PAD_CFG_NC(GPP_B20), + /* B21 : GSPI1_MISO ==> NC(T0809) */ + PAD_CFG_NC(GPP_B21), + /* B22 : GSPI1_MOSI ==> NC(T0810) */ + PAD_CFG_NC(GPP_B22), + /* B23 : SM1ALERT# ==> NC */ + PAD_CFG_NC(GPP_B23), + + /* C0 : SMBCLK ==> SMBCLK */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + /* C1 : SMBDATA ==> SMBDATA */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* C2 : SMBALERT# ==> NC */ + PAD_CFG_NC(GPP_C2), + /* C3 : SML0CLK ==> NC */ + PAD_CFG_NC(GPP_C3), + /* C4 : SML0DATA ==> NC */ + PAD_CFG_NC(GPP_C4), + /* C5 : SML0ALERT# ==> NC */ + PAD_CFG_NC(GPP_C5), + /* C6 : SM1CLK ==> EC_IN_RW_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C6, 20K_PU, DEEP), + /* C7 : SM1DATA ==> NC */ + PAD_CFG_NC(GPP_C7), + /* C8 : UART0_RXD ==> NC(BT_OFF#) */ + PAD_CFG_NC(GPP_C8), + /* C9 : UART0_TXD ==> NC(WLAN_OFF#) */ + PAD_CFG_NC(GPP_C9), + /* C10 : UART0_RTS# ==> NC(T0817) */ + PAD_CFG_NC(GPP_C10), + /* C11 : UART0_CTS# ==> EN_PP3300_DX_CAM */ + PAD_CFG_GPO(GPP_C11, 1, DEEP), + /* C12 : UART1_RXD ==> PCH_MEM_CONFIG[0] */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP), + /* C13 : UART1_TXD ==> PCH_MEM_CONFIG[1] */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C13, NONE, DEEP), + /* C14 : UART1_RTS# ==> PCH_MEM_CONFIG[2] */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C14, NONE, DEEP), + /* C15 : UART1_CTS# ==> PCH_MEM_CONFIG[3] */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C15, NONE, DEEP), + /* C16 : I2C0_SDA ==> PCH_I2C0_TOUCHSCREEN_3V3_SDA */ + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + /* C17 : I2C0_SCL ==> PCH_I2C0_TOUCHSCREEN_3V3_SCL */ + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + /* C18 : I2C1_SDA ==> PCH_I2C1_TRACKPAD_3V3_SDA */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : I2C1_SCL ==> PCH_I2C1_TRACKPAD_3V3_SCL */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + /* C20 : UART2_RXD ==> PCHRX_SERVOTX_UART */ + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), + /* C21 : UART2_TXD ==> PCHTX_SERVORX_UART */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), + /* C22 : UART2_RTS# ==> EN_PP3300_DX_TOUCHSCREEN */ + PAD_CFG_GPO(GPP_C22, 0, DEEP), + /* C23 : UART2_CTS# ==> PCH_WP */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP), + + /* D0 : SPI1_CS# ==> NC */ + PAD_CFG_NC(GPP_D0), + /* D1 : SPI1_CLK ==> NC(T0818) */ + PAD_CFG_NC(GPP_D1), + /* D2 : SPI1_MISO ==> NC(T0819) */ + PAD_CFG_NC(GPP_D2), + /* D3 : SPI1_MOSI ==> NC(T0820) */ + PAD_CFG_NC(GPP_D3), + /* D4 : FASHTRIG ==> NC */ + PAD_CFG_NC(GPP_D4), + /* D5 : ISH_I2C0_SDA ==> NC */ + PAD_CFG_NC(GPP_D5), + /* D6 : ISH_I2C0_SCL ==> NC */ + PAD_CFG_NC(GPP_D6), + /* D7 : ISH_I2C1_SDA ==> NC */ + PAD_CFG_NC(GPP_D7), + /* D8 : ISH_I2C1_SCL ==> NC(T0815) */ + PAD_CFG_NC(GPP_D8), + /* D9 : ISH_SPI_CS# ==> HP_IRQ_GPIO */ + PAD_CFG_GPI_APIC(GPP_D9, 20K_PU, DEEP), + /* D10 : ISH_SPI_CLK ==> SPKR_RST_L */ + PAD_CFG_GPO(GPP_D10, 1, DEEP), + /* D11 : ISH_SPI_MISO ==> SPKR_IRQ_L */ + PAD_CFG_GPI_APIC(GPP_D11, NONE, PLTRST), + /* D12 : ISH_SPI_MOSI ==> NC(T0816) */ + PAD_CFG_NC(GPP_D12), + /* D13 : ISH_UART0_RXD ==> NC */ + PAD_CFG_NC(GPP_D13), + /* D14 : ISH_UART0_TXD ==> NC */ + PAD_CFG_NC(GPP_D14), + /* D15 : ISH_UART0_RTS# ==> NC */ + PAD_CFG_NC(GPP_D15), + /* D16 : ISH_UART0_CTS# ==> NC */ + PAD_CFG_NC(GPP_D16), + /* D17 : ISH_UART0_CTS# ==> DMIC_CLK1_PCH */ + PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), + /* D18 : DMIC_DATA1 ==> NC(T0703) */ + PAD_CFG_NC(GPP_D18), + /* D19 : DMIC_CLK0 ==> DMIC_CLK0_PCH */ + PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), + /* D20 : DMIC_DATA0 ==> DMIC_DATA0_PCH */ + PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), + /* D21 : SPI1_IO2 ==> NC */ + PAD_CFG_NC(GPP_D21), + /* D22 : SPI1_IO3 ==> BOOT_BEEP_OVERRIDE */ + PAD_CFG_GPO(GPP_D22, 1, DEEP), + /* D23 : I2S_MCLK ==> I2S_MCLK */ + PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1), + + /* E0 : SATAXPCI0 ==> H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC_INVERT(GPP_E0, NONE, PLTRST), + /* E1 : SATAXPCIE1 ==> NC */ + PAD_CFG_NC(GPP_E1), + /* E2 : SATAXPCIE2 ==> NC */ + PAD_CFG_NC(GPP_E2), + /* E3 : CPU_GP0 ==> NC */ + PAD_CFG_NC(GPP_E3), + /* E4 : SATA_DEVSLP0 ==> NC */ + PAD_CFG_NC(GPP_E4), + /* E5 : SATA_DEVSLP1 ==> NC */ + PAD_CFG_NC(GPP_E5), + /* E6 : SATA_DEVSLP2 ==> NC */ + PAD_CFG_NC(GPP_E6), + /* E7 : CPU_GP1 ==> TOUCHSCREEN_INT_L */ + PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST), + /* E8 : SATALED# ==> NC */ + PAD_CFG_NC(GPP_E8), + /* E9 : USB2_OCO# ==> USB_C0_OC_ODL */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + /* E10 : USB2_OC1# ==> USB_C1_OC_ODL */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + /* E11 : USB2_OC2# ==> NC(T0504) */ + PAD_CFG_NC(GPP_E11), + /* E12 : USB2_OC3# ==> USB_A0_OC# */ + PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), + /* E13 : DDPB_HPD0 ==> USB_C0_DP_HPD */ + PAD_CFG_NF(GPP_E13, 20K_PD, DEEP, NF1), + /* E14 : DDPC_HPD1 ==> USB_C1_DP_HPD */ + PAD_CFG_NF(GPP_E14, 20K_PD, DEEP, NF1), + /* E15 : DDPD_HPD2 ==> SD_CD_ODL */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, 20K_PU, DEEP), + /* E16 : DDPE_HPD3 ==> NC(T0602) */ + PAD_CFG_NC(GPP_E16), + /* E17 : EDP_HPD ==> EDP_HPD */ + PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), + /* E18 : DDPB_CTRLCLK ==> NC */ + PAD_CFG_NC(GPP_E18), + /* E19 : DDPB_CTRLDATA ==> NC */ + PAD_CFG_NC(GPP_E19), + /* E20 : DDPC_CTRLCLK ==> NC */ + PAD_CFG_NC(GPP_E20), + /* E21 : DDPC_CTRLDATA ==> NC */ + PAD_CFG_NC(GPP_E21), + /* E22 : DDPD_CTRLCLK ==> NC */ + PAD_CFG_NC(GPP_E22), + /* E23 : DDPD_CTRLDATA ==> NC*/ + PAD_CFG_NC(GPP_E23), + + /* The next 4 pads are for bit banging the amplifiers, default to I2S */ + /* F0 : I2S2_SCLK ==> I2S2_SCLK_SPKR_R */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_F0, NONE, DEEP), + /* F1 : I2S2_SFRM ==> I2S2_SFRM_SPKR_R */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_F1, NONE, DEEP), + /* F2 : I2S2_TXD ==> I2S2_PCH_TX_SPKR_RX_R */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_F2, NONE, DEEP), + /* F3 : I2S2_RXD ==> NC */ + PAD_CFG_NC(GPP_F3), + /* F4 : I2C2_SDA ==> I2C_2_SDA */ + PAD_CFG_NF_1V8(GPP_F4, NONE, DEEP, NF1), + /* F5 : I2C2_SCL ==> I2C_2_SCL */ + PAD_CFG_NF_1V8(GPP_F5, NONE, DEEP, NF1), + /* F6 : I2C3_SDA ==> PCH_I2C3_PEN_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_F6, NONE, DEEP, NF1), + /* F7 : I2C3_SCL ==> PCH_I2C3_PEN_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_F7, NONE, DEEP, NF1), + /* F8 : I2C4_SDA ==> PCH_I2C4_H1_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_F8, NONE, DEEP, NF1), + /* F9 : I2C4_SCL ==> PCH_I2C4_H1_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_F9, NONE, DEEP, NF1), + /* F10 : I2C5_SDA ==> PCH_I2C5_AUDIO_1V8_SDA */ + PAD_CFG_NF_1V8(GPP_F10, NONE, DEEP, NF1), + /* F11 : I2C5_SCL ==> PCH_I2C5_AUDIO_1V8_SCL */ + PAD_CFG_NF_1V8(GPP_F11, NONE, DEEP, NF1), + /* F12 : EMMC_CMD ==> EMMC_CMD */ + PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), + /* F13 : EMMC_DATA0 ==> EMMC_DAT0 */ + PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), + /* F14 : EMMC_DATA1 ==> EMMC_DAT1 */ + PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), + /* F15 : EMMC_DATA2 ==> EMMC_DAT2 */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + /* F16 : EMMC_DATA3 ==> EMMC_DAT3 */ + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + /* F17 : EMMC_DATA4 ==> EMMC_DAT4 */ + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + /* F18 : EMMC_DATA5 ==> EMMC_DAT5 */ + PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), + /* F19 : EMMC_DATA6 ==> EMMC_DAT6 */ + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + /* F20 : EMMC_DATA7 ==> EMMC_DAT7 */ + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + /* F21 : EMMC_RCLK ==> EMMC_RCLK */ + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + /* F22 : EMMC_CLK ==> EMMC_CLK */ + PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), + /* F23 : RSVD ==> NC */ + PAD_CFG_NC(GPP_F23), + + /* G0 : SD_CMD ==> SD_CMD */ + PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1), + /* G1 : SD_DATA0 ==> SD_DATA0 */ + PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1), + /* G2 : SD_DATA1 ==> SD_DATA1 */ + PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1), + /* G3 : SD_DATA2 ==> SD_DATA2 */ + PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1), + /* G4 : SD_DATA3 ==> SD_DATA3 */ + PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1), + /* G5 : SD_CD# ==> SD_CD_ODL */ + PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1), + /* G6 : SD_CLK ==> SD_CLK */ + PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1), + /* G7 : SD_WP ==> NC(T0701) */ + PAD_CFG_NF(GPP_G7, 20K_PD, DEEP, NF1), + + /* GPD0: BATLOW# ==> PCH_BATLOW_L */ + PAD_CFG_NF(GPD0, NONE, DEEP, NF1), + /* GPD1: ACPRESENT ==> EC_PCH_ACPRESENT */ + PAD_CFG_NF(GPD1, NONE, DEEP, NF1), + /* GPD2: LAN_WAKE# ==> EC_PCH_WAKE_R_L */ + PAD_CFG_NF(GPD2, NONE, DEEP, NF1), + /* GPD3: PWRBTN# ==> PCH_PWR_BTN_L */ + PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1), + /* GPD4: SLP_S3# ==> SLP_S3_L */ + PAD_CFG_NF(GPD4, NONE, DEEP, NF1), + /* GPD5: SLP_S4# ==> SLP_S4_L */ + PAD_CFG_NF(GPD5, NONE, DEEP, NF1), + /* GPD6: SLP_A# ==> NC(T0912) */ + PAD_CFG_NC(GPD6), + /* GPD7: RSVD ==> NC */ + PAD_CFG_NC(GPD7), + /* GPD8: SUSCLK ==> PCH_SUSCLK */ + PAD_CFG_NF(GPD8, NONE, DEEP, NF1), + /* GPD9: SLP_WLAN# ==> NC(T0911) */ + PAD_CFG_NC(GPD9), + /* GPD10: SLP_S5# ==> NC(T0905) */ + PAD_CFG_NC(GPD10), + /* GPD11: LANPHYC ==> NC */ + PAD_CFG_NC(GPD11), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* B15 : GSPI0_CS# ==> PCH_SPI_H1_3V3_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : GSPI0_CLK ==> PCH_SPI_H1_3V3_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : GSPI0_MISO ==> PCH_SPI_H1_3V3_MISO */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : GSPI0_MOSI ==> PCH_SPI_H1_3V3_MOSI */ + PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), + + /* Ensure UART pins are in native mode for H1. */ + /* C20 : UART2_RXD ==> PCHRX_SERVOTX_UART */ + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), + /* C21 : UART2_TXD ==> PCHTX_SERVORX_UART */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), + + /* C23 : UART2_CTS# ==> PCH_WP */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C23, 20K_PU, DEEP), + + /* E0 : SATAXPCI0 ==> H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC_INVERT(GPP_E0, NONE, PLTRST), +}; + +const struct pad_config *variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + diff --git a/src/mainboard/google/poppy/variants/rammus/include/variant/acpi/dptf.asl b/src/mainboard/google/poppy/variants/rammus/include/variant/acpi/dptf.asl new file mode 100644 index 0000000..a9afa73 --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/include/variant/acpi/dptf.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/acpi/dptf.asl> diff --git a/src/mainboard/google/poppy/variants/rammus/include/variant/ec.h b/src/mainboard/google/poppy/variants/rammus/include/variant/ec.h new file mode 100644 index 0000000..b22fccb --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/include/variant/ec.h @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_EC_H__ +#define __MAINBOARD_EC_H__ + +#include <ec/ec.h> +#include <ec/google/chromeec/ec_commands.h> + +#include <variant/gpio.h> + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP)) + +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) + +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* + * EC can wake from S3 with lid or power button or key press or + * mode change event. + */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED)) + +#define MAINBOARD_EC_S0IX_WAKE_EVENTS (MAINBOARD_EC_S3_WAKE_EVENTS) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) + +/* + * ACPI related definitions for ASL code. + */ + +/* Enable EC backed PD MCU device in ACPI */ +#define EC_ENABLE_PD_MCU_DEVICE + +/* Enable LID switch and provide wake pin for EC */ +#define EC_ENABLE_LID_SWITCH +#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE + +/* Enable Tablet switch */ +#define EC_ENABLE_TABLET_EVENT +#define EC_ENABLE_TBMC_DEVICE + +#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */ +#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */ +#define SIO_EC_ENABLE_PS2K /* Enable PS/2 Keyboard */ + +/* Enable EC backed Keyboard Backlight in ACPI */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT + +#endif /* __MAINBOARD_EC_H__ */ diff --git a/src/mainboard/google/poppy/variants/rammus/include/variant/gpio.h b/src/mainboard/google/poppy/variants/rammus/include/variant/gpio.h new file mode 100644 index 0000000..cd34cf0 --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/include/variant/gpio.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_GPIO_H__ +#define __MAINBOARD_GPIO_H__ + +#include <baseboard/gpio.h> + +#endif /* __MAINBOARD_GPIO_H__ */ diff --git a/src/mainboard/google/poppy/variants/rammus/memory.c b/src/mainboard/google/poppy/variants/rammus/memory.c new file mode 100644 index 0000000..92e66bd --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/memory.c @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/variants.h> + +/* DQ byte map */ +static const u8 dq_map[][12] = { + { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, + 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 }, + { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, + 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } +}; + +/* DQS CPU<>DRAM map */ +static const u8 dqs_map[][8] = { + { 0, 1, 3, 2, 4, 5, 6, 7 }, + { 1, 0, 4, 5, 2, 3, 6, 7 }, +}; + +/* Rcomp resistor */ +static const u16 rcomp_resistor[] = { 200, 81, 162 }; + +/* Rcomp target */ +static const u16 rcomp_target[] = { 100, 40, 40, 23, 40 }; + +void variant_memory_params(struct memory_params *p) +{ + p->type = MEMORY_LPDDR3; + p->dq_map = dq_map; + p->dq_map_size = sizeof(dq_map); + p->dqs_map = dqs_map; + p->dqs_map_size = sizeof(dqs_map); + p->rcomp_resistor = rcomp_resistor; + p->rcomp_resistor_size = sizeof(rcomp_resistor); + p->rcomp_target = rcomp_target; + p->rcomp_target_size = sizeof(rcomp_target); +} diff --git a/src/mainboard/google/poppy/variants/rammus/nhlt.c b/src/mainboard/google/poppy/variants/rammus/nhlt.c new file mode 100644 index 0000000..70c2524 --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/nhlt.c @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/variants.h> +#include <console/console.h> +#include <nhlt.h> +#include <soc/nhlt.h> + +void variant_nhlt_init(struct nhlt *nhlt) +{ + /* 4 Channel DMIC array. */ + if (nhlt_soc_add_dmic_array(nhlt, 4)) + printk(BIOS_ERR, "Couldn't add 4CH DMIC array.\n"); + + /* Dialog DA7219 Headset codec. */ + if (nhlt_soc_add_da7219(nhlt, AUDIO_LINK_SSP1)) + printk(BIOS_ERR, "Couldn't add Dialog DA7219.\n"); + + /* Maxim MAX98927 Smart Amps for left and right channel */ + if (nhlt_soc_add_max98927(nhlt, AUDIO_LINK_SSP0)) + printk(BIOS_ERR, "Couldn't add Maxim MAX98927\n"); + +} + +void variant_nhlt_oem_overrides(const char **oem_id, const char **oem_table_id, + uint32_t *oem_revision) +{ + *oem_id = "GOOGLE"; + *oem_table_id = "RAMMUSMAX"; + *oem_revision = 0; +}
-
Zhuohao Lee (Code Review)