[S] Change in coreboot[master]: mb/amd/birman/gpio: Change non-GEvent GPIOs to PAD_INT

[Fred Reitberger (Code Review)]

Attention is currently required from: Jason Glenesk, Felix Held.

Fred Reitberger has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/70282 )

Change subject: mb/amd/birman/gpio: Change non-GEvent GPIOs to PAD_INT
......................................................................

mb/amd/birman/gpio: Change non-GEvent GPIOs to PAD_INT

Two GPIOs were set as SCI, but are not GEvent capable pins on morgana.

Signed-off-by: Fred Reitberger 
Change-Id: I00dc1b2595c047ce6898b394061d119ac8680755
---
M src/mainboard/amd/birman/early_gpio.c
M src/mainboard/amd/birman/gpio.c
2 files changed, 15 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/70282/1

diff --git a/src/mainboard/amd/birman/early_gpio.c b/src/mainboard/amd/birman/early_gpio.c
index 89f7ef9..a337e1e 100644
--- a/src/mainboard/amd/birman/early_gpio.c
+++ b/src/mainboard/amd/birman/early_gpio.c
@@ -23,7 +23,7 @@
    /* ESPI_ALERT_L */
    PAD_NF(GPIO_22, ESPI_ALERT_D1, PULL_NONE),
    /* TPM IRQ */
-	PAD_SCI(GPIO_130, PULL_UP, EDGE_LOW),
+	PAD_INT(GPIO_130, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
    /* SPI_ROM_REQ */
    PAD_NF(GPIO_67, SPI_ROM_REQ, PULL_NONE),
    /* SPI_ROM_GNT */
diff --git a/src/mainboard/amd/birman/gpio.c b/src/mainboard/amd/birman/gpio.c
index 50cf9db..d70fefd 100644
--- a/src/mainboard/amd/birman/gpio.c
+++ b/src/mainboard/amd/birman/gpio.c
@@ -65,7 +65,7 @@
    /* ESPI_CS_L */
    PAD_NF(GPIO_30, ESPI_CS_L, PULL_NONE),
    /* INT_CLKREQ_L */
-	PAD_SCI(GPIO_31, PULL_UP, EDGE_LOW),
+	PAD_INT(GPIO_31, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
    /* LPC_RST_L */
    PAD_NF(GPIO_32, LPC_RST_L, PULL_NONE),
    /* GPIO_33 - GPIO_37: Not available */
@@ -138,7 +138,7 @@
    PAD_NF(GPIO_116, CLK_REQ2_L, PULL_NONE),
    /* GPIO_117 - GPIO_129: Not available */
    /* TPM IRQ */
-	PAD_SCI(GPIO_130, PULL_UP, EDGE_LOW),
+	PAD_INT(GPIO_130, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
    /* CLK_REQ3_L */
    PAD_NF(GPIO_131, CLK_REQ3_L, PULL_NONE),
    /* CLK_REQ4_L */