[S] Change in coreboot[master]: mb/siemens/mc_ehl2: Disable GSPI2 controller

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/69972 )

Change subject: mb/siemens/mc_ehl2: Disable GSPI2 controller
......................................................................

mb/siemens/mc_ehl2: Disable GSPI2 controller

GSPI2 interface is not used on this mainboard and can be disabled. It
will in addition remove the warning of a leftover static device in the
log.

Change-Id: I6e7462312953d50385ca7bb2f2e0abb8fc3a5886
Signed-off-by: Mario Scheithauer 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69972
Tested-by: build bot (Jenkins) 
Reviewed-by: Werner Zeh 
Reviewed-by: Paul Menzel 
---
M src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
1 file changed, 18 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Paul Menzel: Looks good to me, but someone else must approve
  Werner Zeh: Looks good to me, approved

diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
index 74d0f26..c922e9e 100644
--- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
@@ -142,8 +142,6 @@
    	device pci 00.0 on	end # Host Bridge
    	device pci 02.0 on	end # Integrated Graphics Device

-		device pci 12.0 on	end # GSPI2
-
    	device pci 14.0 on	end # USB3.1 xHCI

device pci 15.0 on	end # I2C0