Aaron Durbin (adurbin@chromium.org) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/14557
-gerrit
commit d91d21a820455b7f973cb59ecd4dec17f074d546 Author: Aaron Durbin adurbin@chromium.org Date: Fri Apr 29 22:55:49 2016 -0500
cpu/x86: combine multiprocessor and SMM initialization
In order to reduce code duplication provide a common flow through callback functions that performs the multiprocessor and SMM initialization.
Change-Id: I6f70969631012982126f0d0d76e5fac6880c24f0 Signed-off-by: Aaron Durbin adurbin@chromium.org --- src/include/cpu/x86/mp.h | 75 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)
diff --git a/src/include/cpu/x86/mp.h b/src/include/cpu/x86/mp.h index 3227975..37f8e62 100644 --- a/src/include/cpu/x86/mp.h +++ b/src/include/cpu/x86/mp.h @@ -17,6 +17,7 @@ #define _X86_MP_H_
#include <arch/smp/atomic.h> +#include <cpu/x86/smm.h>
#define CACHELINE_SIZE 64
@@ -78,6 +79,80 @@ struct mp_params { int num_records; };
+struct mp_ops { + /* + * Return the number of logical x86 execution contexts that + * need to be brought out of SIPI state as well as have SMM + * handlers installed. + */ + int (*get_cpu_count)(void); + /* + * Fill in permanent SMM region and save state size. + */ + void (*get_smm_info)(uintptr_t *perm_smbase, size_t *perm_smsize, + size_t *smm_save_state_size); + /* + * Optionally provide a function which adjusts the APIC id + * map to cpu number. By default the cpu number and APIC id + * are 1:1. To change the APIC id for a given cpu return the + * new APIC id. It's called for each cpu as indicated by + * get_cpu_count(). + */ + int (*adjust_cpu_apic_entry)(int cpu, int cur_apic_id); + /* + * Optionally fill in pointer to microcode and indicate if the APs + * can load the microcode in parallel. + */ + void (*get_microcode_info)(const void **microcode, int *parallel); + /* + * Optionally adjust SMM handler parameters to override the default + * values. The is_perm variable indicates if the parameters to adjust + * are for the relocation handler or the permanent handler. This + * function is therefore called twice -- once for each handler. + * By default the parameters for each SMM handler are: + * stack_size num_concurrent_stacks num_concurrent_save_states + * relo: save_state_size get_cpu_count() 1 + * perm: save_state_size get_cpu_count() get_cpu_count() + */ + void (*adjust_smm_params)(struct smm_loader_params *slp, int is_perm); + /* + * This function is called while each cpu is in the SMM relocation + * handler. Its primary purpose is to adjust the SMBASE for the + * permanent handler. The parameters passed are the current cpu + * running the relocation handler adn the pre-calculated staggered cpu + * SMBASE address to allow parallel permanent SMM handlers. + */ + void (*relocation_handler)(int cpu, uintptr_t staggered_smbase); + /* + * Optional function to use to trigger SMM to perform relocation. If + * not provided, smm_initiate_relocation() is used. + */ + void (*per_cpu_smm_trigger)(void); + /* + * Optionally provide a callback prior to starting the multiprocessor + * sequence. This callback is called after SMM handlers have been + * loaded. + */ + void (*pre_mp_init)(void); +}; + +/* + * mp_init_with_smm() returns < 0 on failure and 0 on success. The mp_ops + * argument is used to drive the multiprocess initialization. The sequence of + * operations is the following: + * 1. get_cpu_count() + * 2. get_smm_info() + * 3. adjust_cpu_apic_entry() + * 4. get_microcode_info() + * 5. adjust_smm_params(is_perm=0) + * 6. adjust_smm_params(is_perm=1) + * 7. pre_mp_init() + * 8. per_cpu_smm_trigger() in parallel for all cpus which calls + * relocation_handler() in SMM. + * 9. mp_initialize_cpu() for each cpu + */ +int mp_init_with_smm(struct bus *cpu_bus, const struct mp_ops *mp_ops); + /* * mp_init() will set up the SIPI vector and bring up the APs according to * mp_params. Each flight record will be executed according to the plan. Note
-
Aaron Durbin