Hello Tim Chen,
I'd like you to do a code review. Please visit
https://review.coreboot.org/c/coreboot/+/43482
to review the following change.
Change subject: mb/google/puff: update USB3 gen2 parameters ......................................................................
mb/google/puff: update USB3 gen2 parameters
Based on USB3 gen2 SI report to fine tune the parameters for USB3 gen2.
BRANCH=none BUG=b:150515720 TEST=build and check the USB3 gen2 register on DUT is correct.
Change-Id: I6ec109871d682a1ae2fa4c22fdd6b87ad8a39e9e Signed-off-by: Tim Chen tim-chen@quanta.corp-partner.google.com --- M src/mainboard/google/hatch/variants/duffy/overridetree.cb M src/mainboard/google/hatch/variants/faffy/overridetree.cb M src/mainboard/google/hatch/variants/kaisa/overridetree.cb 3 files changed, 207 insertions(+), 15 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/43482/1
diff --git a/src/mainboard/google/hatch/variants/duffy/overridetree.cb b/src/mainboard/google/hatch/variants/duffy/overridetree.cb index 244e678..2f2b643 100644 --- a/src/mainboard/google/hatch/variants/duffy/overridetree.cb +++ b/src/mainboard/google/hatch/variants/duffy/overridetree.cb @@ -74,12 +74,76 @@ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # BT
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4
# Bitmap for Wake Enable on USB attach/detach register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ diff --git a/src/mainboard/google/hatch/variants/faffy/overridetree.cb b/src/mainboard/google/hatch/variants/faffy/overridetree.cb index fb4030b..8aff8d1 100644 --- a/src/mainboard/google/hatch/variants/faffy/overridetree.cb +++ b/src/mainboard/google/hatch/variants/faffy/overridetree.cb @@ -81,12 +81,76 @@ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # BT
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4
# Bitmap for Wake Enable on USB attach/detach register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ diff --git a/src/mainboard/google/hatch/variants/kaisa/overridetree.cb b/src/mainboard/google/hatch/variants/kaisa/overridetree.cb index eb177f2..01691ff 100644 --- a/src/mainboard/google/hatch/variants/kaisa/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kaisa/overridetree.cb @@ -74,12 +74,76 @@ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # BT
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4
# Bitmap for Wake Enable on USB attach/detach register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
Jamie Chen has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43482 )
Change subject: mb/google/puff: update USB3 gen2 parameters ......................................................................
Patch Set 1: Code-Review+1
Edward O'Callaghan has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43482 )
Change subject: mb/google/puff: update USB3 gen2 parameters ......................................................................
Patch Set 1: Code-Review+2
Edward O'Callaghan has submitted this change. ( https://review.coreboot.org/c/coreboot/+/43482 )
Change subject: mb/google/puff: update USB3 gen2 parameters ......................................................................
mb/google/puff: update USB3 gen2 parameters
Based on USB3 gen2 SI report to fine tune the parameters for USB3 gen2.
BRANCH=none BUG=b:150515720 TEST=build and check the USB3 gen2 register on DUT is correct.
Change-Id: I6ec109871d682a1ae2fa4c22fdd6b87ad8a39e9e Signed-off-by: Tim Chen tim-chen@quanta.corp-partner.google.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/43482 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Jamie Chen jamie.chen@intel.com Reviewed-by: Edward O'Callaghan quasisec@chromium.org --- M src/mainboard/google/hatch/variants/duffy/overridetree.cb M src/mainboard/google/hatch/variants/faffy/overridetree.cb M src/mainboard/google/hatch/variants/kaisa/overridetree.cb 3 files changed, 207 insertions(+), 15 deletions(-)
Approvals: build bot (Jenkins): Verified Edward O'Callaghan: Looks good to me, approved Jamie Chen: Looks good to me, but someone else must approve
diff --git a/src/mainboard/google/hatch/variants/duffy/overridetree.cb b/src/mainboard/google/hatch/variants/duffy/overridetree.cb index 244e678..2f2b643 100644 --- a/src/mainboard/google/hatch/variants/duffy/overridetree.cb +++ b/src/mainboard/google/hatch/variants/duffy/overridetree.cb @@ -74,12 +74,76 @@ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # BT
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4
# Bitmap for Wake Enable on USB attach/detach register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ diff --git a/src/mainboard/google/hatch/variants/faffy/overridetree.cb b/src/mainboard/google/hatch/variants/faffy/overridetree.cb index fb4030b..8aff8d1 100644 --- a/src/mainboard/google/hatch/variants/faffy/overridetree.cb +++ b/src/mainboard/google/hatch/variants/faffy/overridetree.cb @@ -81,12 +81,76 @@ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # BT
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4
# Bitmap for Wake Enable on USB attach/detach register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \ diff --git a/src/mainboard/google/hatch/variants/kaisa/overridetree.cb b/src/mainboard/google/hatch/variants/kaisa/overridetree.cb index eb177f2..01691ff 100644 --- a/src/mainboard/google/hatch/variants/kaisa/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kaisa/overridetree.cb @@ -74,12 +74,76 @@ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, }" # BT
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1 + register "usb3_ports[0]" = "{ + .enable = 1, + .ocpin = OC2, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 2 + register "usb3_ports[1]" = "USB3_PORT_GEN2_DEFAULT(OC3)" # Type-A Port 3 + register "usb3_ports[2]" = "{ + .enable = 1, + .ocpin = OC1, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x3d, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 1 register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0 - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4 + register "usb3_ports[4]" = "{ + .enable = 1, + .ocpin = OC0, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 0 + register "usb3_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_de_emp = 0x00, + .tx_downscale_amp = 0x00, + .gen2_tx_rate0_uniq_tran_enable = 0, + .gen2_tx_rate0_uniq_tran = 0x00, + .gen2_tx_rate1_uniq_tran_enable = 0, + .gen2_tx_rate1_uniq_tran = 0x00, + .gen2_tx_rate2_uniq_tran_enable = 1, + .gen2_tx_rate2_uniq_tran = 0x4c, + .gen2_tx_rate3_uniq_tran_enable = 0, + .gen2_tx_rate3_uniq_tran = 0x00, + .gen2_rx_tuning_enable = 0x0f, + .gen2_rx_tuning_params = 0x45, + .gen2_rx_filter_sel = 0x44, + }" # Type-A Port 4
# Bitmap for Wake Enable on USB attach/detach register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
-
Edward O'Callaghan (Code Review) -
Jamie Chen (Code Review)
-
Tim Chen (Code Review)