Patch set updated for coreboot: mb/gigabyte/ga-g41m-es2l: Tie in configuration for SuperIO EC

[Arthur Heymans]

Arthur Heymans ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17602

-gerrit

commit ef3ed63d479617ea1259b4502bd5f605257500ea
Author: Damien Zammit 
Date:   Fri Nov 25 22:10:19 2016 +1100

mb/gigabyte/ga-g41m-es2l: Tie in configuration for SuperIO EC

Change-Id: Ifba821a7e355a0d6689f21c7f307e3901903a3fd
    Signed-off-by: Damien Zammit 
    Signed-off-by: Arthur Heymans 
---
 src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb
index bd80742..60004d2 100644
--- a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb
+++ b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb
@@ -82,6 +82,31 @@ chip northbridge/intel/x4x		# Northbridge
       device pci 1f.0 on		# ISA bridge
         subsystemid 0x1458 0x5001
         chip superio/ite/it8718f	# Super I/O
+          register "TMPIN1" = "THERMAL_RESISTOR"
+          register "TMPIN2" = "THERMAL_RESISTOR"
+          register "TMPIN3" = "THERMAL_DIODE"
+          register "ec.vin_mask" = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0"
+
+          register "FAN1.mode" = "FAN_SMART_AUTOMATIC"
+          register "FAN1.smart.tmpin" = "3"
+          register "FAN1.smart.tmp_off" = "25"
+          register "FAN1.smart.tmp_start" = "30"
+          register "FAN1.smart.tmp_full" = "65"
+          register "FAN1.smart.tmp_delta" = "3"
+          register "FAN1.smart.smoothing" = "1"
+          register "FAN1.smart.pwm_start" = "0"
+          register "FAN1.smart.slope" = "10"
+
+          register "FAN2.mode" = "FAN_SMART_AUTOMATIC"
+          register "FAN2.smart.tmpin" = "3"
+          register "FAN2.smart.tmp_off" = "25"
+          register "FAN2.smart.tmp_start" = "30"
+          register "FAN2.smart.tmp_full" = "65"
+          register "FAN2.smart.tmp_delta" = "3"
+          register "FAN2.smart.smoothing" = "1"
+          register "FAN2.smart.pwm_start" = "0"
+          register "FAN2.smart.slope" = "10"
+
           device pnp 2e.0 on		# Floppy
             io 0x60 = 0x3f0
             irq 0x70 = 6