Patch set updated for coreboot: src/vendorcode: Add Memory Info Data HOB Header
Barnali Sarkar (barnali.sarkar@intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18326 -gerrit commit 5e9e545ed6e8c0a2565928b1b4f1f59fc666b58f Author: Barnali Sarkar <barnali.sarkar@intel.com> Date: Fri Feb 10 21:46:05 2017 +0530 src/vendorcode: Add Memory Info Data HOB Header Add the MemInfoHob.h provided by FSP v1.6.0 for aid in parsing the MEM_INFO_DATA_HOB. BUG=chrome-os-partner:61729 BRANCH=none TEST=Build and boot KBLRVP Change-Id: Ia2b528ba4d9f093006cc12ee317d02e7f3e83166 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> --- .../intel/fsp/fsp2_0/skykabylake/FspmUpd.h | 1 + .../intel/fsp/fsp2_0/skykabylake/MemInfoHob.h | 214 +++++++++++++++++++++ 2 files changed, 215 insertions(+) diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h index 89dc419..6bb57a1 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h @@ -34,6 +34,7 @@ are permitted provided that the following conditions are met: #define __FSPMUPD_H__ #include <FspUpd.h> +#include "MemInfoHob.h" #pragma pack(1) diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/MemInfoHob.h new file mode 100644 index 0000000..8dc2db9 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/MemInfoHob.h @@ -0,0 +1,214 @@ +/** @file + +Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_NODE 1 +#define MAX_CH 2 +#define MAX_DIMM 2 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef bmCold +#define bmCold 0 // Cold boot +#endif +#ifndef bmWarm +#define bmWarm 1 // Warm boot +#endif +#ifndef bmS3 +#define bmS3 2 // S3 resume +#endif +#ifndef bmFast +#define bmFast 3 // Fast boot +#endif + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR4 +#define MRC_DDR_TYPE_DDR4 0 +#endif +#ifndef MRC_DDR_TYPE_DDR3 +#define MRC_DDR_TYPE_DDR3 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR3 +#define MRC_DDR_TYPE_LPDDR3 2 +#endif +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 3 +#endif + +#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. +} MRC_CH_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO Dimm[MAX_DIMM]; ///< Save the DIMM output characteristics. +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO Channel[MAX_CH]; ///< The following are channel level definitions. +} CONTROLLER_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 DdrType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT32 Frequency; ///< The system's common memory controller frequency in MT/s. + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + UINT32 FreqMax; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM]; // Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; // If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 Ratio; + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + CONTROLLER_INFO Controller[MAX_NODE]; +} MEMORY_INFO_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_
participants (1)
-
Barnali Sarkar