Change in coreboot[master]: soc/intel/jasperlake: Allow SD card power enable polarity configuration

[Ronak Kanabar (Code Review)]

Hello build bot (Jenkins), Patrick Georgi, Maulik V Vaghela, Subrata Banik, Aamir Bohra, Patrick Rudolph, Karthik Ramasubramanian, 

I'd like you to reexamine a change. Please visit

    https://review.coreboot.org/c/coreboot/+/41027

to look at the new patch set (#7).

Change subject: soc/intel/jasperlake: Allow SD card power enable polarity configuration
......................................................................

soc/intel/jasperlake: Allow SD card power enable polarity configuration

SdCardPowerEnable ActiveHigh is a UPD which controls polarity of SD card
power enable pin. Setting it 1 will set polarity of this pin as Active
high. This patch will allow to control it from devicetree so that it
can be set as per each board's requirement.

BUG=b:155595624
BRANCH=None
TEST=Build, boot JSLRVP, Verified Upd value from fsp log

Signed-off-by: Ronak Kanabar <[e-mail]>
Change-Id: Id777a262651689952a217875e6606f67855fc2f4
---
M src/soc/intel/jasperlake/fsp_params.c
1 file changed, 4 insertions(+), 2 deletions(-)


  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/27/41027/7
-- 
To view, visit https://review.coreboot.org/c/coreboot/+/41027
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: Id777a262651689952a217875e6606f67855fc2f4
Gerrit-Change-Number: 41027
Gerrit-PatchSet: 7
Gerrit-Owner: Ronak Kanabar <[e-mail]>
Gerrit-Reviewer: Aamir Bohra <[e-mail]>
Gerrit-Reviewer: Karthik Ramasubramanian <[e-mail]>
Gerrit-Reviewer: Maulik V Vaghela <[e-mail]>
Gerrit-Reviewer: Patrick Georgi <[e-mail]>
Gerrit-Reviewer: Patrick Rudolph <[e-mail]>
Gerrit-Reviewer: Subrata Banik <[e-mail]>
Gerrit-Reviewer: build bot (Jenkins) <[e-mail]>
Gerrit-MessageType: newpatchset