[M] Change in coreboot[master]: mb/google/nissa/var/pujjo: Tune SX9324 register for pujjoteen5

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/75900?usp=email )

Change subject: mb/google/nissa/var/pujjo: Tune SX9324 register for pujjoteen5
......................................................................

mb/google/nissa/var/pujjo: Tune SX9324 register for pujjoteen5

Update SX9324 register settings based on tuning value from SEMTECH.

BUG=b:279510275
TEST=Check i2c register settings on Pujjoteen5 and confirm P sensor function can work.

Signed-off-by: Leo Chou 
Change-Id: Idc9a2dc817e027551e209c0a26eeebad398f710c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75900
Reviewed-by: Derek Huang 
Reviewed-by: Eric Lai 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/google/brya/variants/pujjo/overridetree.cb
1 file changed, 74 insertions(+), 0 deletions(-)

Approvals:
  Eric Lai: Looks good to me, approved
  build bot (Jenkins): Verified
  Derek Huang: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/pujjo/overridetree.cb b/src/mainboard/google/brya/variants/pujjo/overridetree.cb
index 9a822d6..6601247 100644
--- a/src/mainboard/google/brya/variants/pujjo/overridetree.cb
+++ b/src/mainboard/google/brya/variants/pujjo/overridetree.cb
@@ -460,6 +460,80 @@
    				probe LTE LTE_PRESENT
    			end
    		end
+			chip drivers/i2c/sx9324
+				register "desc" = ""SAR Proximity Sensor""
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
+				register "speed" = "I2C_SPEED_FAST"
+				register "uid" = "1"
+				register "reg_gnrl_ctrl0" = "0x16"
+				register "reg_gnrl_ctrl1" = "0x25"
+				register "reg_afe_ctrl0" = "0x20"
+				register "reg_afe_ctrl1" = "0x10"
+				register "reg_afe_ctrl2" = "0x00"
+				register "reg_afe_ctrl3" = "0x00"
+				register "reg_afe_ctrl4" = "0x47"
+				register "reg_afe_ctrl5" = "0x00"
+				register "reg_afe_ctrl6" = "0x00"
+				register "reg_afe_ctrl7" = "0x47"
+				register "reg_afe_ctrl8" = "0x12"
+				register "reg_afe_ctrl9" = "0x08"
+				register "reg_afe_ph0" = "0x3d"
+				register "reg_afe_ph1" = "0x3f"
+				register "reg_afe_ph2" = "0x37"
+				register "reg_afe_ph3" = "0x3f"
+				register "reg_prox_ctrl0" = "0x0b"
+				register "reg_prox_ctrl1" = "0x0b"
+				register "reg_prox_ctrl2" = "0x20"
+				register "reg_prox_ctrl3" = "0x60"
+				register "reg_prox_ctrl4" = "0x0c"
+				register "reg_prox_ctrl5" = "0x00"
+				register "reg_prox_ctrl6" = "0x10"
+				register "reg_prox_ctrl7" = "0x0e"
+				register "reg_adv_ctrl0" = "0x00"
+				register "reg_adv_ctrl1" = "0x00"
+				register "reg_adv_ctrl2" = "0x00"
+				register "reg_adv_ctrl3" = "0x00"
+				register "reg_adv_ctrl4" = "0x00"
+				register "reg_adv_ctrl5" = "0x05"
+				register "reg_adv_ctrl6" = "0x00"
+				register "reg_adv_ctrl7" = "0x00"
+				register "reg_adv_ctrl8" = "0x00"
+				register "reg_adv_ctrl9" = "0x00"
+				register "reg_adv_ctrl10" = "0x00"
+				register "reg_adv_ctrl11" = "0x00"
+				register "reg_adv_ctrl12" = "0x00"
+				register "reg_adv_ctrl13" = "0x00"
+				register "reg_adv_ctrl14" = "0x80"
+				register "reg_adv_ctrl15" = "0x0c"
+				register "reg_adv_ctrl16" = "0x04"
+				register "reg_adv_ctrl17" = "0xff"
+				register "reg_adv_ctrl18" = "0x35"
+				register "reg_adv_ctrl19" = "0x00"
+				register "reg_adv_ctrl20" = "0x00"
+				register "reg_irq_msk" = "0x60"
+				register "reg_irq_cfg0" = "0x00"
+				register "reg_irq_cfg1" = "0x80"
+				register "reg_irq_cfg2" = "0x00"
+
+				register "ph0_pin" = "{1, 3, 3}"
+				register "ph1_pin" = "{3, 3, 3}"
+				register "ph2_pin" = "{3, 1, 3}"
+				register "ph3_pin" = "{3, 3, 3}"
+				register "ph01_resolution" = "1024"
+				register "ph23_resolution" = "1024"
+				register "startup_sensor" = "1"
+				register "ph01_proxraw_strength" = "3"
+				register "ph23_proxraw_strength" = "3"
+				register "avg_pos_strength" = "256"
+				register "cs_idle_sleep" = ""gnd""
+				register "int_comp_resistor" = ""lowest""
+				register "input_precharge_resistor_ohms" = "4000"
+				register "input_analog_gain" = "1"
+				device i2c 28 on
+					probe WWAN_5G WWAN_5G_PRESENT
+				end
+			end
+
    	end
    	device ref i2c3 on
    		chip drivers/i2c/generic