Martin L Roth has submitted this change. ( https://review.coreboot.org/c/coreboot/+/77575?usp=email )
Change subject: mb/google/nissa/var/uldren: Enable Weida touchscreen ......................................................................
mb/google/nissa/var/uldren: Enable Weida touchscreen
Support Weida WDT8790A touchscreen.
BUG=b:297453122 BRANCH=firmware-brya-14505.B TEST=touchscreen is workable and evtest shows WDHT2601 $evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Lid Switch /dev/input/event1: Power Button /dev/input/event10: sof-cs42l42 HDMI/DP,pcm=2 /dev/input/event11: sof-cs42l42 HDMI/DP,pcm=3 /dev/input/event12: sof-cs42l42 HDMI/DP,pcm=4 /dev/input/event13: sof-cs42l42 HDMI/DP,pcm=5 /dev/input/event2: AT Translated Set 2 keyboard /dev/input/event3: cros_ec_buttons /dev/input/event4: Elan Touchpad /dev/input/event5: WDHT2601:00 2575:0921 /dev/input/event6: WDHT2601:00 2575:0921 Stylus /dev/input/event7: WDHT2601:00 2575:0921 Stylus /dev/input/event8: DELL Dell USB Entry Keyboard /dev/input/event9: sof-cs42l42 Headset Jack
Change-Id: If9539afaf891c8352bc7fc8e548fd77ea57ea6ca Signed-off-by: Dtrain Hsu dtrain_hsu@compal.corp-partner.google.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/77575 Reviewed-by: Eric Lai eric_lai@quanta.corp-partner.google.com Reviewed-by: Ian Feng ian_feng@compal.corp-partner.google.com Reviewed-by: Derek Huang derekhuang@google.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/google/brya/variants/uldren/overridetree.cb 1 file changed, 19 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Derek Huang: Looks good to me, approved Ian Feng: Looks good to me, approved Eric Lai: Looks good to me, approved
diff --git a/src/mainboard/google/brya/variants/uldren/overridetree.cb b/src/mainboard/google/brya/variants/uldren/overridetree.cb index 3b9ecab..6a7d357 100644 --- a/src/mainboard/google/brya/variants/uldren/overridetree.cb +++ b/src/mainboard/google/brya/variants/uldren/overridetree.cb @@ -16,6 +16,7 @@ option TOUCHSCREEN_EKTH5012 4 option TOUCHSCREEN_WDT8752A 5 option TOUCHSCREEN_GTCH7502 6 + option TOUCHSCREEN_WDT8790A 7 end field EXT_VR 14 14 option EXT_VR_PRESENT 0 @@ -300,6 +301,24 @@ probe TOUCHSCREEN TOUCHSCREEN_GTCH7502 end end + chip drivers/i2c/hid + register "generic.hid" = ""WDHT2601"" + register "generic.desc" = ""WDT Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.detect" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "20" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_delay_ms" = "130" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 3c on + probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN + probe TOUCHSCREEN TOUCHSCREEN_WDT8790A + end + end end device ref i2c3 on chip drivers/i2c/cs42l42