New patch to review for coreboot: 8f9e39b AMD Fam16: Add secondary bus number to CRES method

[Bruce Griffith]

Bruce Griffith ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3822

-gerrit

commit 8f9e39b32c632b750b3793175ba3e52b8bd4dfdd
Author: Mike Loptien 
Date:   Thu Jul 18 10:16:31 2013 -0600

AMD Fam16: Add secondary bus number to CRES method

Adding the 'WordBusNumber' macro to the PCI0
    CRES ResourceTemplate in the AMD FCH ACPI code.
    This sets up the bus number for the PCI0 device
    and the secondary bus number in the CRS method.
    This change came in response to a 'dmesg' error
    which states:
    '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS'

By adding the 'WordBusNumber' macro, ACPI can set
    up a valid range for the PCIe downstream busses,
    thereby relieving the Linux kernel from "guessing"
    the valid range based off _BBN or assuming [0-0xFF].
    The Linux kernel code that checks this bus range is
    in `drivers/acpi/pci_root.c`.  PCI busses can have
    up to 256 secondary busses connected to them via
    a PCI-PCI bridge.  However, these busses do not
    have to be sequentially numbered, so leaving out a
    section of the range (eg. allowing [0-0x7F]) will
    unnecessarily restrict the downstream busses.

This is the same change that was made on Family14
    in this patch:
    26855fc: AMD Fam14 DSDT: Add secondary bus range to PCI0

Change-Id: Ib2d36f69a26b715798ef1ea17deb0905fa0cad87
    Signed-off-by: Mike Loptien 
    Reviewed-on: http://gerrit/725
    Reviewed-by: Marc Jones 
    Tested-by: Bruce Griffith 
---
 src/southbridge/amd/agesa/hudson/acpi/fch.asl | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/src/southbridge/amd/agesa/hudson/acpi/fch.asl b/src/southbridge/amd/agesa/hudson/acpi/fch.asl
index 4fbf853..5d3a29c 100755
--- a/src/southbridge/amd/agesa/hudson/acpi/fch.asl
+++ b/src/southbridge/amd/agesa/hudson/acpi/fch.asl
@@ -71,6 +71,22 @@ Device(ACMD) {
 #endif

Name(CRES, ResourceTemplate() {
+	/* Set the Bus number and Secondary Bus number for the PCI0 device
+	 * The Secondary bus range for PCI0 lets the system
+	 * know what bus values are allowed on the downstream
+	 * side of this PCI bus if there is a PCI-PCI bridge.
+	 * PCI busses can have 256 secondary busses which
+	 * range from [0-0xFF] but they do not need to be
+	 * sequential.
+	 */
+	WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+		0x0000,		/* address granularity */
+		0x0000,		/* range minimum */
+		0x00FF,		/* range maximum */
+		0x0000,		/* translation */
+		0x0100,		/* length */
+		,, PSB0)		/* ResourceSourceIndex, ResourceSource, DescriptorName */
+
    IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)

WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,