Change in coreboot[master]: [TEST] mb/google/nissa/var/craask: Enable OVTI8856 MIPI camera

[Reka Norman (Code Review)]

Reka Norman has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/64847 )

Change subject: [TEST] mb/google/nissa/var/craask: Enable OVTI8856 MIPI camera
......................................................................

[TEST] mb/google/nissa/var/craask: Enable OVTI8856 MIPI camera

Change-Id: I18984fec46cc89d107139fe458d5dc4a10b9d20e
Signed-off-by: Reka Norman 
---
M src/mainboard/google/brya/variants/craask/overridetree.cb
1 file changed, 48 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/47/64847/1

diff --git a/src/mainboard/google/brya/variants/craask/overridetree.cb b/src/mainboard/google/brya/variants/craask/overridetree.cb
index 01f10e1..e4917ff 100644
--- a/src/mainboard/google/brya/variants/craask/overridetree.cb
+++ b/src/mainboard/google/brya/variants/craask/overridetree.cb
@@ -7,6 +7,7 @@
    field WFC 2 3
    	option WFC_ABSENT		0
    	option WFC_MIPI_OVTI5675	1
+		option WFC_MIPI_OVTI8856	2
    end
    field STYLUS 4
    	option STYLUS_ABSENT		0
@@ -45,6 +46,7 @@
    			device generic 0 on end
    		end
    		probe WFC WFC_MIPI_OVTI5675
+			probe WFC WFC_MIPI_OVTI8856
    	end
    	device ref i2c1 on
    		chip drivers/i2c/hid
@@ -175,6 +177,50 @@
    			end
    		end
    		chip drivers/intel/mipi_camera
+				register "acpi_hid" = ""OVTI8856""
+				register "acpi_uid" = "0"
+				register "acpi_name" = ""CAM0""
+				register "chip_name" = ""Ov 8856 Camera""
+				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+				register "has_power_resource" = "1"
+
+				register "ssdb.lanes_used" = "2"
+				register "ssdb.link_used" = "1"
+				register "ssdb.vcm_type" = "0x0C"
+				register "vcm_name" = ""VCM0""
+				register "num_freq_entries" = "2"
+				register "link_freq[0]" = "720000000"
+				register "link_freq[1]" = "360000000"
+				register "remote_name" = ""IPU0""
+
+				#Controls
+				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
+				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
+
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  # EN_PP2800_WCAM_X
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16"  # EN_PP1800_PP1200_WCAM_X
+				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3"   # WCAM_RST_L
+
+				#_ON
+				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "4"
+				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+				device i2c 10 on
+					probe WFC WFC_MIPI_OVTI8856
+				end
+			end
+			chip drivers/intel/mipi_camera
    			register "acpi_uid" = "3"
    			register "acpi_name" = ""VCM0""
    			register "chip_name" = ""DW AF DAC""
@@ -185,6 +231,7 @@

device i2c 0C on
    				probe WFC WFC_MIPI_OVTI5675
+					probe WFC WFC_MIPI_OVTI8856
    			end
    		end
    		chip drivers/intel/mipi_camera
@@ -204,6 +251,7 @@

device i2c 50 on
    				probe WFC WFC_MIPI_OVTI5675
+					probe WFC WFC_MIPI_OVTI8856
    			end
    		end
    	end