[S] Change in coreboot[main]: drivers/tpm: Add tpm failure handling

[Raul Rangel (Code Review)]

Raul Rangel has submitted this change. ( https://review.coreboot.org/c/coreboot/+/77667?usp=email )

(

26 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: drivers/tpm: Add tpm failure handling
......................................................................

drivers/tpm: Add tpm failure handling

Add additional failure mode logic for the TPM to enable an
automated recovery mode for GSC hangs.

BUG=b:296439237
TEST=Force the error by hard coding the return code and observe the
device entering hibernate.
BRANCH=None

Change-Id: Ieec7e9227d538130354dea8b772d0306cdda1237
Signed-off-by: Jon Murphy 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77667
Reviewed-by: Eric Lai 
Reviewed-by: Julius Werner 
Tested-by: build bot (Jenkins) 
---
M src/security/tpm/Kconfig
M src/security/vboot/vboot_logic.c
2 files changed, 25 insertions(+), 1 deletion(-)

Approvals:
  Julius Werner: Looks good to me, approved
  build bot (Jenkins): Verified
  Eric Lai: Looks good to me, approved

diff --git a/src/security/tpm/Kconfig b/src/security/tpm/Kconfig
index 39134c1..c06150d 100644
--- a/src/security/tpm/Kconfig
+++ b/src/security/tpm/Kconfig
@@ -172,3 +172,12 @@
    default 3

endmenu # Trusted Platform Module (tpm)
+
+config TPM_SETUP_HIBERNATE_ON_ERR
+	bool
+	depends on EC_GOOGLE_CHROMEEC
+	help
+	  Select this to force a device to hibernate on the next AP shutdown when a TPM
+	  setup error occurs. This will cause a cold boot of the system and offer an
+	  opportunity to recover the TPM should it be hung. This is only effective if
+	  the Z-State brings the power rail down.
diff --git a/src/security/vboot/vboot_logic.c b/src/security/vboot/vboot_logic.c
index ab38085..11983b9 100644
--- a/src/security/vboot/vboot_logic.c
+++ b/src/security/vboot/vboot_logic.c
@@ -4,6 +4,7 @@
 #include <assert.h>
 #include <console/console.h>
 #include <bootmode.h>
+#include <ec/google/chromeec/ec.h>
 #include <fmap.h>
 #include <security/tpm/tspi/crtm.h>
 #include <security/tpm/tss/vendor/cr50/cr50.h>
@@ -271,9 +272,23 @@
     * check the return value here because vb2api_fw_phase1 will catch
     * invalid secdata and tell us what to do (=reboot). */
    timestamp_add_now(TS_TPMINIT_START);
-	if (vboot_setup_tpm(ctx) == TPM_SUCCESS) {
+	rv = vboot_setup_tpm(ctx);
+	if (rv == TPM_SUCCESS) {
    	antirollback_read_space_firmware(ctx);
    	antirollback_read_space_kernel(ctx);
+	} else {
+		vb2api_fail(ctx, VB2_RECOVERY_RO_TPM_S_ERROR, rv);
+		if (CONFIG(TPM_SETUP_HIBERNATE_ON_ERR) &&
+				rv == TPM_CB_COMMUNICATION_ERROR) {
+			printk(BIOS_ERR, "Failed to communicate with TPM\n"
+					"Next reboot will hibernate to reset TPM");
+			/* Command the EC to hibernate on next AP shutdown */
+			if (google_chromeec_reboot(
+					EC_REBOOT_HIBERNATE,
+					EC_REBOOT_FLAG_ON_AP_SHUTDOWN)) {
+				printk(BIOS_ERR, "Failed to get EC to schedule hibernate");
+			}
+		}
    }
    timestamp_add_now(TS_TPMINIT_END);