[S] Change in coreboot[main]: mb/google/nissa/var/craask: Add ILTK touchscreen

[Ren Kuo (Code Review)]

Ren Kuo has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/79735?usp=email )

Change subject: mb/google/nissa/var/craask: Add ILTK touchscreen
......................................................................

mb/google/nissa/var/craask: Add ILTK touchscreen

Add touchscreen ILTK for craaskwell

BUG=b:308873706
TEST=build and check touchscreen function on craask

Change-Id: I6a68855b1659ff0c9cd33a0ec9acbd289f525a3d
Signed-off-by: Ren Kuo 
---
M src/mainboard/google/brya/variants/craask/overridetree.cb
1 file changed, 15 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/35/79735/1

diff --git a/src/mainboard/google/brya/variants/craask/overridetree.cb b/src/mainboard/google/brya/variants/craask/overridetree.cb
index eb16142..7b6bd53 100644
--- a/src/mainboard/google/brya/variants/craask/overridetree.cb
+++ b/src/mainboard/google/brya/variants/craask/overridetree.cb
@@ -390,6 +390,21 @@
    				probe TS_SOURCE TS_UNPROVISIONED
    			end
    		end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ILTK0001""
+				register "generic.desc" = ""ILITEK Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.detect" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "generic.reset_delay_ms" = "200"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+				register "generic.stop_off_delay_ms" = "200"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 41 on end
+			end
    	end
    	device ref i2c2 on
    		chip drivers/intel/mipi_camera