[S] Change in coreboot[main]: mb/google/guybrush: Set PS2K_IRQ to level/low

[Mark Hasemeyer (Code Review)]

Attention is currently required from: Jason Nien, Karthik Ramasubramanian, Martin L Roth, Paul Menzel.

Mark Hasemeyer has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/78137?usp=email )

Change subject: mb/google/guybrush: Set PS2K_IRQ to level/low
......................................................................


Patch Set 4:

(2 comments)

Commit Message:

https://review.coreboot.org/c/coreboot/+/78137/comment/327dfaa9_ae990c85 :
PS3, Line 12: From https://review.coreboot.org/c/coreboot/+/54924:
> git operates with the hashes (74bce48f1d445053b217913df79a77dfe286e893), so I’d use that.
> Done

https://review.coreboot.org/c/coreboot/+/78137/comment/90631dcc_bd8cb7f2 :
PS3, Line 13:   > The default state for the IRQ lines when the eSPI controller comes
            :   > out of reset is high. This is because the IRQ lines are shared with
            :   > the other IRQ sources using AND gates. This means that in order to
            :   > not cause any spurious interrupts or miss any interrupts, the
            :   > IO-APIC must use a low polarity trigger.
> Remove the trailing two spaces?
> Did you mean the leading spaces? I removed them.