5 comments:
File util/autoport/haswell.go:
Non-ULT boards will need to select `TSC_MONOTONIC_TIMER` to boot. They […]
Done
File util/autoport/lynxpoint.go:
Patch Set #1, Line 311: FIXME: check this
Yup, I was caught unawares by this.
Done
pdo1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x64]
ocmap1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x74:0x78]
pdo2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x64]
ocmap2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x74:0x78]
It's possible for the USB 2 ports to be routed to the xHCI controller, […]
Done
RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"})
RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"})
Oh, I just copied these IDs from lynxpoint/smbus.c, and didn't check the document.
Done
Patch Set #1, Line 494: RegisterPCI(0x8086, 0x8c33, GenericPCI{})
Some boards may have the thermal device 1f.6 (0x8c24) enabled. […]
Done
To view, visit change 30890. To unsubscribe, or for help writing mail filters, visit settings.