Tim Wawrzynczak submitted this change.
mb/google/volteer: Fix a few devicetree device refs
Commit b0e169ac85 included a few small omissions and typos when
converting 'device pci xx.y' to 'device ref blah' after adding the new
chipset.cb file for TGL. This patch fixes these errors:
1) MIPI camera support requires I2C2 & I2C3 enabled
2) Malefor SAR sensor is on I2C2, not I2C3
BUG=b:175165653
TEST=abuild -p none -t google/volteer -x -a -c max
Change-Id: I577957d67f47bbe88bbc2535fb1cb5c8f7390438
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
---
M src/mainboard/google/volteer/variants/baseboard/devicetree.cb
M src/mainboard/google/volteer/variants/malefor/overridetree.cb
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
index 353aa27..30625ca 100644
--- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
@@ -464,6 +464,9 @@
device generic 0 on end
end
end
+ # MIPI camera devices are on I2C buses 2 and 3
+ device ref i2c2 on end
+ device ref i2c3 on end
device ref heci1 on end
device ref sata on end
device ref pcie_rp1 on end
diff --git a/src/mainboard/google/volteer/variants/malefor/overridetree.cb b/src/mainboard/google/volteer/variants/malefor/overridetree.cb
index ec9bd67..95dc3f7 100644
--- a/src/mainboard/google/volteer/variants/malefor/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/malefor/overridetree.cb
@@ -63,7 +63,7 @@
device i2c 5d on end
end
end
- device ref i2c3 on
+ device ref i2c2 on
chip drivers/i2c/sx9310
register "desc" = ""SAR0 Proximity Sensor""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
To view, visit change 48511. To unsubscribe, or for help writing mail filters, visit settings.