Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/9993
-gerrit
commit 6b16a69be8314fe41a4d97b473e76e97088e4e1f Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Sat Apr 25 18:29:28 2015 +0300
sandy/ivy/nehalem: Fix interrupt handling [NOTFORMERGE]
This partially reverts commit 33b535f1.
PIRQA-PIRQH may be wired as edge-triggered interrupts, making them exclusive for the GPIO to use. They cannot be used for PCI devices at the same time.
Change-Id: Ic90343401ac20ca8673baf927cd7703c3481aeab Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- .../google/butterfly/acpi/sandybridge_pci_irqs.asl | 64 ++++++++++++++++ src/mainboard/google/butterfly/romstage.c | 42 ++++++++++- .../google/link/acpi/sandybridge_pci_irqs.asl | 68 +++++++++++++++++ src/mainboard/google/link/romstage.c | 39 +++++++++- .../google/parrot/acpi/sandybridge_pci_irqs.asl | 68 +++++++++++++++++ src/mainboard/google/parrot/romstage.c | 43 ++++++++++- .../google/stout/acpi/sandybridge_pci_irqs.asl | 72 ++++++++++++++++++ src/mainboard/google/stout/romstage.c | 43 ++++++++++- .../emeraldlake2/acpi/sandybridge_pci_irqs.asl | 68 +++++++++++++++++ src/mainboard/intel/emeraldlake2/romstage.c | 38 +++++++++- .../kontron/ktqm77/acpi/sandybridge_pci_irqs.asl | 87 ++++++++++++++++++++++ src/mainboard/kontron/ktqm77/romstage.c | 58 ++++++++++++++- .../lenovo/t520/acpi/sandybridge_pci_irqs.asl | 64 ++++++++++++++++ src/mainboard/lenovo/t520/romstage.c | 42 +++++++++++ .../lenovo/t530/acpi/sandybridge_pci_irqs.asl | 64 ++++++++++++++++ src/mainboard/lenovo/t530/romstage.c | 42 +++++++++++ .../lenovo/x201/acpi/nehalem_pci_irqs.asl | 86 +++++++++++++++++++++ src/mainboard/lenovo/x201/romstage.c | 40 +++++++++- .../lenovo/x220/acpi/sandybridge_pci_irqs.asl | 64 ++++++++++++++++ src/mainboard/lenovo/x220/romstage.c | 42 +++++++++++ .../lenovo/x230/acpi/sandybridge_pci_irqs.asl | 64 ++++++++++++++++ src/mainboard/lenovo/x230/romstage.c | 42 +++++++++++ .../packardbell/ms2290/acpi/nehalem_pci_irqs.asl | 86 +++++++++++++++++++++ src/mainboard/packardbell/ms2290/romstage.c | 41 ++++++++-- .../samsung/lumpy/acpi/sandybridge_pci_irqs.asl | 68 +++++++++++++++++ src/mainboard/samsung/lumpy/romstage.c | 36 ++++++++- .../samsung/stumpy/acpi/sandybridge_pci_irqs.asl | 68 +++++++++++++++++ src/mainboard/samsung/stumpy/romstage.c | 38 +++++++++- src/northbridge/intel/nehalem/acpi/hostbridge.asl | 3 + .../intel/sandybridge/acpi/hostbridge.asl | 3 + src/southbridge/intel/bd82x6x/acpi/irq.asl | 72 ------------------ src/southbridge/intel/bd82x6x/acpi/pch.asl | 2 - 32 files changed, 1566 insertions(+), 91 deletions(-)
diff --git a/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..6c1c695 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c index 1753cd5..eda54a5 100644 --- a/src/mainboard/google/butterfly/romstage.c +++ b/src/mainboard/google/butterfly/romstage.c @@ -60,7 +60,47 @@ void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC);
/* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/google/link/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/link/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..a4267bb --- /dev/null +++ b/src/mainboard/google/link/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 19 }, + Package() { 0x001cffff, 1, 0, 20 }, + Package() { 0x001cffff, 2, 0, 17 }, + Package() { 0x001cffff, 3, 0, 18 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, + Package() { 0x001fffff, 1, 0, 23 }, + Package() { 0x001fffff, 2, 0, 16 }, + Package() { 0x001fffff, 3, 0, 18 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKC, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKC, 0 }, + }) + } +} diff --git a/src/mainboard/google/link/romstage.c b/src/mainboard/google/link/romstage.c index 5844aa6..e814a24 100644 --- a/src/mainboard/google/link/romstage.c +++ b/src/mainboard/google/link/romstage.c @@ -78,7 +78,44 @@ static void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P3IP WLAN INTA -> PIRQB + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * TRACKPAD -> PIRQE (Edge Triggered) + * TOUCHSCREEN -> PIRQG (Edge Triggered) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC);
/* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..a4267bb --- /dev/null +++ b/src/mainboard/google/parrot/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 19 }, + Package() { 0x001cffff, 1, 0, 20 }, + Package() { 0x001cffff, 2, 0, 17 }, + Package() { 0x001cffff, 3, 0, 18 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, + Package() { 0x001fffff, 1, 0, 23 }, + Package() { 0x001fffff, 2, 0, 16 }, + Package() { 0x001fffff, 3, 0, 18 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKC, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKC, 0 }, + }) + } +} diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c index ab82bde..fc50a87 100644 --- a/src/mainboard/google/parrot/romstage.c +++ b/src/mainboard/google/parrot/romstage.c @@ -62,7 +62,48 @@ static void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P2IP WLAN INTA -> PIRQB + * D28IP_P3IP ETH0 INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQE + * D26IP_E2P EHCI2 INTA -> PIRQE + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + * + * Trackpad DVT PIRQA (16) + * Trackpad DVT PIRQE (20) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (NOINT << D28IP_P1IP) | (INTA << D28IP_P2IP) | + (INTC << D28IP_P3IP) | (NOINT << D28IP_P4IP) | + (NOINT << D28IP_P5IP) | (NOINT << D28IP_P6IP) | + (NOINT << D28IP_P7IP) | (NOINT << D28IP_P8IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC);
/* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/google/stout/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/stout/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..cf3d82a --- /dev/null +++ b/src/mainboard/google/stout/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 19 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 19 }, + Package() { 0x001cffff, 1, 0, 20 }, + Package() { 0x001cffff, 2, 0, 17 }, + Package() { 0x001cffff, 3, 0, 18 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, + Package() { 0x001fffff, 1, 0, 23 }, + Package() { 0x001fffff, 2, 0, 16 }, + Package() { 0x001fffff, 3, 0, 18 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKC, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKC, 0 }, + }) + } +} diff --git a/src/mainboard/google/stout/romstage.c b/src/mainboard/google/stout/romstage.c index 6a6aa48..5e6db50 100644 --- a/src/mainboard/google/stout/romstage.c +++ b/src/mainboard/google/stout/romstage.c @@ -68,7 +68,48 @@ static void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * GFX INTA -> PIRQA (MSI) + * D20IP_XHCI XHCI INTA -> PIRQD (MSI) + * D26IP_E2P EHCI #2 INTA -> PIRQF + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * D28IP_P2IP WLAN INTA -> PIRQD + * D28IP_P3IP Card Reader INTB -> PIRQE + * D28IP_P6IP LAN INTC -> PIRQB + * D29IP_E1P EHCI #1 INTA -> PIRQD + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (NOINT << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (NOINT << D28IP_P1IP) | (INTA << D28IP_P2IP) | + (INTB << D28IP_P3IP) | (NOINT << D28IP_P4IP) | + (NOINT << D28IP_P5IP) | (INTC << D28IP_P6IP) | + (NOINT << D28IP_P7IP) | (NOINT << D28IP_P8IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + RCBA32(D20IP) = (INTA << D20IP_XHCIIP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQD, PIRQE, PIRQB, PIRQC); + DIR_ROUTE(D27IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D26IR, PIRQF, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D20IR, PIRQD, PIRQE, PIRQF, PIRQG); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC);
/* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl b/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..a57f9f1 --- /dev/null +++ b/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 18 }, + Package() { 0x001cffff, 2, 0, 19 }, + Package() { 0x001cffff, 3, 0, 20 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 20 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 21 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c index 45d92d8..8344a6c 100644 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ b/src/mainboard/intel/emeraldlake2/romstage.c @@ -74,7 +74,43 @@ static void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQE + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC);
/* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl b/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..ceb40be --- /dev/null +++ b/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,87 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Ivybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // LPC devices 0:1f.x + // D31IP_TTIP THRT INTC -> PIRQC + Package() { 0x001fffff, 2, 0, 18 },// D31IP_SMIP SMBUS INTC -> PIRQC + Package() { 0x001fffff, 1, 0, 19 },// D31IP_SIP SATA INTB -> PIRQD (MSI) + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 23 },// D29IP_E1P EHCI1 INTA -> PIRQH + // PCIe Root Ports 0:1c.x + // D28IP_P8IP Slot? INTD -> PIRQD + Package() { 0x001cffff, 3, 0, 19 },// D28IP_P4IP ETH2 INTD -> PIRQD (MSI) + // D28IP_P7IP PCIEx1 INTC -> PIRQC + Package() { 0x001cffff, 2, 0, 18 },// D28IP_P3IP ETH1 INTC -> PIRQC (MSI) + // D28IP_P6IP 1394 INTB -> PIRQB (MSI) + Package() { 0x001cffff, 1, 0, 17 },// D28IP_P2IP Slot? INTB -> PIRQB + // D28IP_P5IP GbEPHY INTA -> PIRQA + Package() { 0x001cffff, 0, 0, 16 },// D28IP_P1IP Slot? INTA -> PIRQA + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 },// D27IP_ZIP HDA INTA -> PIRQG (MSI) + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 16 },// D26IP_E2P EHCI2 INTA -> PIRQA + // ETH0 0:19.0 + Package() { 0x0019ffff, 0, 0, 20 },// D25IP_LIP ETH0 INTA -> PIRQE (MSI) + // xHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 16 },// D20IP_XHCIIP xHCI INTA -> PIRQA (MSI) + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // PCIe PEG x16 0:1.0 + Package() { 0x0001ffff, 3, 0, 19 },// PEGx16 INTD -> PIRQD + Package() { 0x0001ffff, 2, 0, 18 },// PEGx16 INTC -> PIRQC + Package() { 0x0001ffff, 1, 0, 17 },// PEGx16 INTB -> PIRQB + Package() { 0x0001ffff, 0, 0, 16 },// PEGx16 INTA -> PIRQA + }) + } Else { + Return (Package() { + // LPC devices 0:1f.x + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // ETH0 0:19.0 + Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // xHCI 0:14.0 + Package() { 0x0014ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe PEG x16 0:1.0 + Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c index 22dc33d..a4bc3a2 100644 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ b/src/mainboard/kontron/ktqm77/romstage.c @@ -60,7 +60,63 @@ static void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * D31IP_TTIP THRT INTC -> PIRQC + * D31IP_SIP2 SATA2 NOINT + * D31IP_SMIP SMBUS INTC -> PIRQC + * D31IP_SIP SATA INTB -> PIRQD (MSI) + * D29IP_E1P EHCI1 INTA -> PIRQH + * D28IP_P8IP Slot? INTD -> PIRQD + * D28IP_P7IP PCIEx1 INTC -> PIRQC + * D28IP_P6IP 1394 INTB -> PIRQB (MSI) + * D28IP_P5IP GbEPHY INTA -> PIRQA + * D28IP_P4IP ETH2 INTD -> PIRQD (MSI) + * D28IP_P3IP ETH1 INTC -> PIRQC (MSI) + * D28IP_P2IP Slot? INTB -> PIRQB + * D28IP_P1IP Slot? INTA -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + * D26IP_E2P EHCI2 INTA -> PIRQA + * D25IP_LIP ETH0 INTA -> PIRQE (MSI) + * D22IP_KTIP MEI NOINT + * D22IP_IDERIP MEI NOINT + * D22IP_MEI2IP MEI NOINT + * D22IP_MEI1IP MEI NOINT + * D20IP_XHCIIP XHCI INTA -> PIRQA (MSI) + * GFX INTA -> PIRQA (MSI) + * PEGx16 INTA -> PIRQA + * INTB -> PIRQB + * INTC -> PIRQC + * INTD -> PIRQD + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP) | (INTD << D28IP_P4IP) | + (INTA << D28IP_P5IP) | (INTB << D28IP_P6IP) | + (INTC << D28IP_P7IP) | (INTD << D28IP_P8IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (INTA << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + RCBA32(D20IP) = (INTA << D20IP_XHCIIP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); + DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); + DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D26IR, PIRQA, PIRQF, PIRQC, PIRQD); + DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); + DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); + DIR_ROUTE(D20IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC);
/* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..b4b81a2 --- /dev/null +++ b/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P2IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P4IP EXC INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P5IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/t520/romstage.c b/src/mainboard/lenovo/t520/romstage.c index f7866a8..83be0c7 100644 --- a/src/mainboard/lenovo/t520/romstage.c +++ b/src/mainboard/lenovo/t520/romstage.c @@ -60,6 +60,48 @@ void pch_enable_lpc(void)
void rcba_config(void) { + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P2IP WLAN INTA -> PIRQB + * D28IP_P4IP EXC INTB -> PIRQF + * D28IP_P5IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P2IP) | (INTB << D28IP_P4IP) | + (INTC << D28IP_P5IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + /* Disable unused devices (board specific) */ RCBA32(FD) = 0x1ee51fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..6c1c695 --- /dev/null +++ b/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/t530/romstage.c b/src/mainboard/lenovo/t530/romstage.c index f29d375..970ee97 100644 --- a/src/mainboard/lenovo/t530/romstage.c +++ b/src/mainboard/lenovo/t530/romstage.c @@ -47,6 +47,48 @@ void pch_enable_lpc(void)
void rcba_config(void) { + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + /* Disable unused devices (board specific) */ RCBA32(FD) = 0x17f81fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl b/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl new file mode 100644 index 0000000..3e9e1b3 --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing. + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + Package() { 0x0001ffff, 0, 0, 0x10 }, + Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA + Package() { 0x0003ffff, 0, 0, 0x10 }, + Package() { 0x0016ffff, 0, 0, 0x10 }, // ME + Package() { 0x0016ffff, 1, 0, 0x11 }, // ME + Package() { 0x0016ffff, 2, 0, 0x12 }, // ME + Package() { 0x0016ffff, 3, 0, 0x13 }, // ME + Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet + Package() { 0x001affff, 0, 0, 0x14 }, // USB + Package() { 0x001affff, 1, 0, 0x15 }, // USB + Package() { 0x001affff, 2, 0, 0x16 }, // USB + Package() { 0x001affff, 3, 0, 0x17 }, // USB + Package() { 0x001bffff, 1, 0, 0x11 }, // Audio + Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge + Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge + Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge + Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge + Package() { 0x001dffff, 0, 0, 0x10 }, // USB + Package() { 0x001dffff, 1, 0, 0x11 }, // USB + Package() { 0x001dffff, 2, 0, 0x12 }, // USB + Package() { 0x001dffff, 3, 0, 0x13 }, // USB + Package() { 0x001fffff, 0, 0, 0x17 }, // LPC + Package() { 0x001fffff, 1, 0, 0x10 }, // IDE + Package() { 0x001fffff, 2, 0, 0x11 }, // SATA + Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS + }) + } Else { + Return (Package() { + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA + Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // ME + Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // ME + Package() { 0x0016ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // ME + Package() { 0x0016ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // ME + Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // Ethernet + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // USB + Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // USB + Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // USB + Package() { 0x001affff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // USB + Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // PCI + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // PCI + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // PCI + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // PCI + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, // SATA + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKD, 0 } // SMBus + }) + } +} diff --git a/src/mainboard/lenovo/x201/romstage.c b/src/mainboard/lenovo/x201/romstage.c index 624440a..3ae8a3b 100644 --- a/src/mainboard/lenovo/x201/romstage.c +++ b/src/mainboard/lenovo/x201/romstage.c @@ -75,9 +75,41 @@ static void pch_enable_lpc(void)
static void rcba_config(void) { - southbridge_configure_default_intmap(); - static const u32 rcba_dump3[] = { + /* 30fc */ 0x00000000, + /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, + /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, + /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, + /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, + /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, + /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, + /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, @@ -147,8 +179,8 @@ static void rcba_config(void) }; unsigned i; for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { - RCBA32(4 * i + 0x3310) = rcba_dump3[i]; - (void)RCBA32(4 * i + 0x3310); + RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; + (void)RCBA32(4 * i + 0x30fc); } }
diff --git a/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..6c1c695 --- /dev/null +++ b/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/x220/romstage.c b/src/mainboard/lenovo/x220/romstage.c index d0fb8e6..cf25703 100644 --- a/src/mainboard/lenovo/x220/romstage.c +++ b/src/mainboard/lenovo/x220/romstage.c @@ -57,6 +57,48 @@ void pch_enable_lpc(void)
void rcba_config(void) { + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + /* Disable unused devices (board specific) */ RCBA32(FD) = 0x1fe41fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..6c1c695 --- /dev/null +++ b/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/x230/romstage.c b/src/mainboard/lenovo/x230/romstage.c index 4ea272d..ef47b54 100644 --- a/src/mainboard/lenovo/x230/romstage.c +++ b/src/mainboard/lenovo/x230/romstage.c @@ -60,6 +60,48 @@ void pch_enable_lpc(void)
void rcba_config(void) { + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + /* Disable unused devices (board specific) */ RCBA32(FD) = 0x17f81fe3; RCBA32(BUC) = 0; diff --git a/src/mainboard/packardbell/ms2290/acpi/nehalem_pci_irqs.asl b/src/mainboard/packardbell/ms2290/acpi/nehalem_pci_irqs.asl new file mode 100644 index 0000000..1f782c8 --- /dev/null +++ b/src/mainboard/packardbell/ms2290/acpi/nehalem_pci_irqs.asl @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing. + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + Package() { 0x0001ffff, 0, 0, 0x10 }, + Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA + Package() { 0x0003ffff, 0, 0, 0x10 }, + Package() { 0x0016ffff, 0, 0, 0x10 }, // ME + Package() { 0x0016ffff, 1, 0, 0x11 }, // ME + Package() { 0x0016ffff, 2, 0, 0x12 }, // ME + Package() { 0x0016ffff, 3, 0, 0x13 }, // ME + Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet + Package() { 0x001affff, 0, 0, 0x14 }, // USB + Package() { 0x001affff, 1, 0, 0x15 }, // USB + Package() { 0x001affff, 2, 0, 0x16 }, // USB + Package() { 0x001affff, 3, 0, 0x17 }, // USB + Package() { 0x001bffff, 1, 0, 0x11 }, // Audio + Package() { 0x001cffff, 0, 0, 0x10 }, // PCI bridge + Package() { 0x001cffff, 1, 0, 0x11 }, // PCI bridge + Package() { 0x001cffff, 2, 0, 0x12 }, // PCI bridge + Package() { 0x001cffff, 3, 0, 0x13 }, // PCI bridge + Package() { 0x001dffff, 0, 0, 0x10 }, // USB + Package() { 0x001dffff, 1, 0, 0x11 }, // USB + Package() { 0x001dffff, 2, 0, 0x12 }, // USB + Package() { 0x001dffff, 3, 0, 0x13 }, // USB + Package() { 0x001fffff, 0, 0, 0x17 }, // LPC + Package() { 0x001fffff, 1, 0, 0x10 }, // IDE + Package() { 0x001fffff, 2, 0, 0x11 }, // SATA + Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS + }) + } Else { + Return (Package() { + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA + Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // ME + Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // ME + Package() { 0x0016ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // ME + Package() { 0x0016ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // ME + Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // Ethernet + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // USB + Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // USB + Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // USB + Package() { 0x001affff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // USB + Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // PCI + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // PCI + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // PCI + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // PCI + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, // SATA + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKD, 0 } // SMBus + }) + } +} diff --git a/src/mainboard/packardbell/ms2290/romstage.c b/src/mainboard/packardbell/ms2290/romstage.c index f702e9f..0d65e66 100644 --- a/src/mainboard/packardbell/ms2290/romstage.c +++ b/src/mainboard/packardbell/ms2290/romstage.c @@ -70,9 +70,41 @@ static void pch_enable_lpc(void)
static void rcba_config(void) { - southbridge_configure_default_intmap(); - static const u32 rcba_dump3[] = { + /* 30fc */ 0x00000000, + /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, + /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, + /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, + /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, + /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, + /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, + /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, @@ -141,10 +173,9 @@ static void rcba_config(void) /* 3710 */ 0x00000000, 0x4e564d49, 0x00000000, 0x00000000, }; unsigned i; - for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { - RCBA32(4 * i + 0x3310) = rcba_dump3[i]; - (void)RCBA32(4 * i + 0x3310); + RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; + (void)RCBA32(4 * i + 0x30fc); } }
diff --git a/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl b/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..aff2351 --- /dev/null +++ b/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 18 }, + Package() { 0x001cffff, 2, 0, 19 }, + Package() { 0x001cffff, 3, 0, 16 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 17 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 16 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 17 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKB, 0 }, + }) + } +} diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c index 29a238a..27be119 100644 --- a/src/mainboard/samsung/lumpy/romstage.c +++ b/src/mainboard/samsung/lumpy/romstage.c @@ -74,7 +74,41 @@ static void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC (MSI) + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQB + * D31IP_SIP SATA INTA -> PIRQA (MSI) + * D31IP_SMIP SMBUS INTC -> PIRQH + * D31IP_TTIP THRT INTB -> PIRQG + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + * + * LIGHTSENSOR -> PIRQE (Edge Triggered) + * TRACKPAD -> PIRQF (Edge Triggered) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTB << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTC << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQA, PIRQG, PIRQH, PIRQB); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQB, PIRQC, PIRQD, PIRQA); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD);
/* Enable IOAPIC (generic) */ RCBA16(OIC) = 0x0100; diff --git a/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl b/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..2636f13 --- /dev/null +++ b/src/mainboard/samsung/stumpy/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 18 }, + Package() { 0x001cffff, 2, 0, 19 }, + Package() { 0x001cffff, 3, 0, 20 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 20 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 21 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c index 346026f..3c2308a 100644 --- a/src/mainboard/samsung/stumpy/romstage.c +++ b/src/mainboard/samsung/stumpy/romstage.c @@ -86,7 +86,43 @@ static void rcba_config(void) { u32 reg32;
- southbridge_configure_default_intmap(); + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQE + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC);
/* Disable unused devices (board specific) */ reg32 = RCBA32(FD); diff --git a/src/northbridge/intel/nehalem/acpi/hostbridge.asl b/src/northbridge/intel/nehalem/acpi/hostbridge.asl index d210a95..aeb4c29 100644 --- a/src/northbridge/intel/nehalem/acpi/hostbridge.asl +++ b/src/northbridge/intel/nehalem/acpi/hostbridge.asl @@ -343,3 +343,6 @@ Method (_CRS, 0, Serialized)
Return (MCRS) } + +/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */ +#include "acpi/nehalem_pci_irqs.asl" diff --git a/src/northbridge/intel/sandybridge/acpi/hostbridge.asl b/src/northbridge/intel/sandybridge/acpi/hostbridge.asl index 26f7514..d9fc171 100644 --- a/src/northbridge/intel/sandybridge/acpi/hostbridge.asl +++ b/src/northbridge/intel/sandybridge/acpi/hostbridge.asl @@ -378,3 +378,6 @@ Method (_CRS, 0, Serialized)
Return (MCRS) } + +/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */ +#include "acpi/sandybridge_pci_irqs.asl" diff --git a/src/southbridge/intel/bd82x6x/acpi/irq.asl b/src/southbridge/intel/bd82x6x/acpi/irq.asl deleted file mode 100644 index 61e3335..0000000 --- a/src/southbridge/intel/bd82x6x/acpi/irq.asl +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* PCI Interrupt Routing */ -Method(_PRT) -{ - If (PICM) { - Return (Package() { - /* Onboard graphics (IGD) 0:2.0 */ - Package() { 0x0002ffff, 0, 0, 16 },/* GFX INTA -> PIRQA (MSI) */ - /* XHCI 0:14.0 (ivy only) */ - Package() { 0x0014ffff, 0, 0, 19 }, - /* High Definition Audio 0:1b.0 */ - Package() { 0x001bffff, 0, 0, 16 },/* D27IP_ZIP HDA INTA -> PIRQA (MSI) */ - /* PCIe Root Ports 0:1c.x */ - Package() { 0x001cffff, 0, 0, 17 },/* D28IP_P1IP PCIe INTA -> PIRQB */ - Package() { 0x001cffff, 1, 0, 21 },/* D28IP_P2IP PCIe INTB -> PIRQF */ - Package() { 0x001cffff, 2, 0, 19 },/* D28IP_P3IP PCIe INTC -> PIRQD */ - Package() { 0x001cffff, 3, 0, 20 },/* D28IP_P3IP PCIe INTD -> PIRQE */ - /* EHCI #1 0:1d.0 */ - Package() { 0x001dffff, 0, 0, 19 },/* D29IP_E1P EHCI1 INTA -> PIRQD */ - /* EHCI #2 0:1a.0 */ - Package() { 0x001affff, 0, 0, 21 },/* D26IP_E2P EHCI2 INTA -> PIRQF */ - /* LPC devices 0:1f.0 */ - Package() { 0x001fffff, 0, 0, 17 }, /* D31IP_SIP SATA INTA -> PIRQB (MSI) */ - Package() { 0x001fffff, 1, 0, 23 }, /* D31IP_SMIP SMBUS INTB -> PIRQH */ - Package() { 0x001fffff, 2, 0, 16 }, /* D31IP_TTIP THRT INTC -> PIRQA */ - Package() { 0x001fffff, 3, 0, 18 }, - }) - } Else { - Return (Package() { - /* Onboard graphics (IGD) 0:2.0 */ - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - /* XHCI 0:14.0 (ivy only) */ - Package() { 0x0014ffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - /* High Definition Audio 0:1b.0 */ - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - /* PCIe Root Ports 0:1c.x */ - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, - /* EHCI #1 0:1d.0 */ - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - /* EHCI #2 0:1a.0 */ - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - /* LPC device 0:1f.0 */ - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKC, 0 }, - }) - } -} diff --git a/src/southbridge/intel/bd82x6x/acpi/pch.asl b/src/southbridge/intel/bd82x6x/acpi/pch.asl index 73fcfcc..27f08e2 100644 --- a/src/southbridge/intel/bd82x6x/acpi/pch.asl +++ b/src/southbridge/intel/bd82x6x/acpi/pch.asl @@ -257,8 +257,6 @@ Scope() // SMBus 0:1f.3 #include "smbus.asl"
-#include "irq.asl" - Method (_OSC, 4) { /* Check for XHCI */