HAOUAS Elyes has uploaded this change for review.
mb/hp/abm: Drop boards with ROMCC_BOOTBLOCK
ROMCC_BOOTBLOCK is no more. Drop unsupported, unmaintained boards.
Change-Id: Ide08226a3dea759baa0ca26f04e16629c0134744
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
---
D src/mainboard/hp/abm/BiosCallOuts.c
D src/mainboard/hp/abm/Kconfig
D src/mainboard/hp/abm/Kconfig.name
D src/mainboard/hp/abm/Makefile.inc
D src/mainboard/hp/abm/OemCustomize.c
D src/mainboard/hp/abm/OptionsIds.h
D src/mainboard/hp/abm/acpi/gpe.asl
D src/mainboard/hp/abm/acpi/ide.asl
D src/mainboard/hp/abm/acpi/mainboard.asl
D src/mainboard/hp/abm/acpi/routing.asl
D src/mainboard/hp/abm/acpi/sata.asl
D src/mainboard/hp/abm/acpi/si.asl
D src/mainboard/hp/abm/acpi/sleep.asl
D src/mainboard/hp/abm/acpi/superio.asl
D src/mainboard/hp/abm/acpi/thermal.asl
D src/mainboard/hp/abm/acpi/usb_oc.asl
D src/mainboard/hp/abm/acpi_tables.c
D src/mainboard/hp/abm/board_info.txt
D src/mainboard/hp/abm/buildOpts.c
D src/mainboard/hp/abm/cmos.layout
D src/mainboard/hp/abm/devicetree.cb
D src/mainboard/hp/abm/dsdt.asl
D src/mainboard/hp/abm/irq_tables.c
D src/mainboard/hp/abm/mainboard.c
D src/mainboard/hp/abm/mptable.c
D src/mainboard/hp/abm/romstage.c
26 files changed, 0 insertions(+), 2,384 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/38104/1
diff --git a/src/mainboard/hp/abm/BiosCallOuts.c b/src/mainboard/hp/abm/BiosCallOuts.c
deleted file mode 100644
index 4728c59..0000000
--- a/src/mainboard/hp/abm/BiosCallOuts.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <AGESA.h>
-#include <northbridge/amd/agesa/BiosCallOuts.h>
-#include <northbridge/amd/agesa/state_machine.h>
-#include <FchPlatform.h>
-#include <stdlib.h>
-
-const BIOS_CALLOUT_STRUCT BiosCallouts[] =
-{
- {AGESA_DO_RESET, agesa_Reset },
- {AGESA_READ_SPD, agesa_ReadSpd },
- {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
- {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
- {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
- {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
- {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
- {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
-};
-const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
-
-void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
-{
-}
-
-void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
-{
-}
diff --git a/src/mainboard/hp/abm/Kconfig b/src/mainboard/hp/abm/Kconfig
deleted file mode 100644
index 907c025..0000000
--- a/src/mainboard/hp/abm/Kconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2012-2014 Advanced Micro Devices, Inc.
-# Copyright (C) 2014 Sage Electronic Engineering, LLC
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-config BOARD_HP_ABM
- def_bool n
-
-if BOARD_HP_ABM
-
-config BOARD_SPECIFIC_OPTIONS
- def_bool y
- #select ROMCC_BOOTBLOCK
- select CPU_AMD_AGESA_FAMILY16_KB
- select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB
- select SOUTHBRIDGE_AMD_AGESA_YANGTZE
- select DEFAULT_POST_ON_LPC
- select SUPERIO_NUVOTON_NCT5104D
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_8192
-
-config MAINBOARD_DIR
- string
- default "hp/abm"
-
-config MAINBOARD_PART_NUMBER
- string
- default "ABM"
-
-config HW_MEM_HOLE_SIZEK
- hex
- default 0x200000
-
-config MAX_CPUS
- int
- default 4
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-config HUDSON_LEGACY_FREE
- bool
- default n
-
-endif # BOARD_HP_ABM
diff --git a/src/mainboard/hp/abm/Kconfig.name b/src/mainboard/hp/abm/Kconfig.name
deleted file mode 100644
index 27eda0c..0000000
--- a/src/mainboard/hp/abm/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-#config BOARD_HP_ABM
-# bool"ABM"
diff --git a/src/mainboard/hp/abm/Makefile.inc b/src/mainboard/hp/abm/Makefile.inc
deleted file mode 100644
index f8895fa..0000000
--- a/src/mainboard/hp/abm/Makefile.inc
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2012 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-romstage-y += buildOpts.c
-romstage-y += BiosCallOuts.c
-romstage-y += OemCustomize.c
-
-ramstage-y += buildOpts.c
-ramstage-y += BiosCallOuts.c
-ramstage-y += OemCustomize.c
diff --git a/src/mainboard/hp/abm/OemCustomize.c b/src/mainboard/hp/abm/OemCustomize.c
deleted file mode 100644
index 424b68a..0000000
--- a/src/mainboard/hp/abm/OemCustomize.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <AGESA.h>
-#include <PlatformMemoryConfiguration.h>
-
-#include <northbridge/amd/agesa/state_machine.h>
-
-static const PCIe_PORT_DESCRIPTOR PortList[] = {
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 3, 3),
- PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 5,
- HotplugDisabled,
- PcieGenMaxSupported,
- PcieGenMaxSupported,
- AspmDisabled, 0x01, 0)
- },
- /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 2, 2),
- PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 4,
- HotplugDisabled,
- PcieGenMaxSupported,
- PcieGenMaxSupported,
- AspmDisabled, 0x02, 0)
- },
- /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 1, 1),
- PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 3,
- HotplugDisabled,
- PcieGenMaxSupported,
- PcieGenMaxSupported,
- AspmDisabled, 0x03, 0)
- },
- /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 0),
- PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 2,
- HotplugDisabled,
- PcieGenMaxSupported,
- PcieGenMaxSupported,
- AspmDisabled, 0x04, 0)
- },
- /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */
- {
- DESCRIPTOR_TERMINATE_LIST,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 7),
- PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 1,
- HotplugDisabled,
- PcieGenMaxSupported,
- PcieGenMaxSupported,
- AspmDisabled, 0x05, 0)
- }
-};
-
-static const PCIe_DDI_DESCRIPTOR DdiList[] = {
- /* DP0 to HDMI0/DP */
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11),
- PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux1, Hdp1)
- },
- /* DP1 to FCH */
- {
- DESCRIPTOR_TERMINATE_LIST,
- PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15),
- PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux2, Hdp2)
- },
-};
-
-static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
- .Flags = DESCRIPTOR_TERMINATE_LIST,
- .SocketId = 0,
- .PciePortList = PortList,
- .DdiLinkList = DdiList
-};
-
-void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset)
-{
- FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface;
- FchReset->Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE);
- FchReset->Xhci1Enable = FALSE;
-}
-
-void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly)
-{
- InitEarly->GnbConfig.PcieComplexList = &PcieComplex;
-}
-
-/*----------------------------------------------------------------------------------------
- * CUSTOMER OVERIDES MEMORY TABLE
- *----------------------------------------------------------------------------------------
- */
-
-/*
- * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
- * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
- * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
- * use its default conservative settings.
- */
-static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = {
- #define SEED_A 0x12
- HW_RXEN_SEED(
- ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
- SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
- SEED_A),
-
- NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, ONE_DIMM),
- NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, ONE_DIMM),
- MOTHER_BOARD_LAYERS(LAYERS_6),
-
- MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
- CKE_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */
- ODT_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08),
- CS_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
-
- PSO_END
-};
-
-void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost)
-{
- InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable;
-}
-
-void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid)
-{
- /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
- InitMid->GnbMidConfiguration.iGpuVgaMode = 0;
-}
diff --git a/src/mainboard/hp/abm/OptionsIds.h b/src/mainboard/hp/abm/OptionsIds.h
deleted file mode 100644
index 544ac53..0000000
--- a/src/mainboard/hp/abm/OptionsIds.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/**
- * @file
- *
- * IDS Option File
- *
- * This file is used to switch on/off IDS features.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: AGESA
- * @e sub-project: Core
- * @e \$Revision: 12067 $ @e \$Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $
- */
-#ifndef _OPTION_IDS_H_
-#define _OPTION_IDS_H_
-
-/**
- *
- * This file generates the defaults tables for the Integrated Debug Support
- * Module. The documented build options are imported from a user controlled
- * file for processing. The build options for the Integrated Debug Support
- * Module are listed below:
- *
- * IDSOPT_IDS_ENABLED
- * IDSOPT_ERROR_TRAP_ENABLED
- * IDSOPT_CONTROL_ENABLED
- * IDSOPT_TRACING_ENABLED
- * IDSOPT_PERF_ANALYSIS
- * IDSOPT_ASSERT_ENABLED
- * IDS_DEBUG_PORT
- * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
- *
- **/
-
-#define IDSOPT_IDS_ENABLED TRUE
-//#define IDSOPT_CONTROL_ENABLED TRUE
-//#define IDSOPT_TRACING_ENABLED TRUE
-#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
-//#define IDSOPT_PERF_ANALYSIS TRUE
-#define IDSOPT_ASSERT_ENABLED TRUE
-//#undef IDSOPT_DEBUG_ENABLED
-//#define IDSOPT_DEBUG_ENABLED FALSE
-//#undef IDSOPT_HOST_SIMNOW
-//#define IDSOPT_HOST_SIMNOW FALSE
-//#undef IDSOPT_HOST_HDT
-//#define IDSOPT_HOST_HDT FALSE
-//#define IDS_DEBUG_PORT 0x80
-
-#endif /* _OPTION_IDS_H_ */
diff --git a/src/mainboard/hp/abm/acpi/gpe.asl b/src/mainboard/hp/abm/acpi/gpe.asl
deleted file mode 100644
index 87b0d21..0000000
--- a/src/mainboard/hp/abm/acpi/gpe.asl
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Scope(\_GPE) { /* Start Scope GPE */
-
- /* General event 3 */
- Method(_L03) {
- /* DBGO("\\_GPE\\_L00\n") */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* Legacy PM event */
- Method(_L08) {
- /* DBGO("\\_GPE\\_L08\n") */
- }
-
- /* Temp warning (TWarn) event */
- Method(_L09) {
- /* DBGO("\\_GPE\\_L09\n") */
- /* Notify (\_TZ.TZ00, 0x80) */
- }
-
- /* USB controller PME# */
- Method(_L0B) {
- /* DBGO("\\_GPE\\_L0B\n") */
- Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* ExtEvent0 SCI event */
- Method(_L10) {
- /* DBGO("\\_GPE\\_L10\n") */
- }
-
- /* ExtEvent1 SCI event */
- Method(_L11) {
- /* DBGO("\\_GPE\\_L11\n") */
- }
-
- /* GPIO0 or GEvent8 event */
- Method(_L18) {
- /* DBGO("\\_GPE\\_L18\n") */
- Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* Azalia SCI event */
- Method(_L1B) {
- /* DBGO("\\_GPE\\_L1B\n") */
- Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-} /* End Scope GPE */
diff --git a/src/mainboard/hp/abm/acpi/ide.asl b/src/mainboard/hp/abm/acpi/ide.asl
deleted file mode 100644
index e7f4625..0000000
--- a/src/mainboard/hp/abm/acpi/ide.asl
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012-2013 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* No IDE functionality */
-
-#if 0
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(IDEC) {
- Name(_ADR, 0x00140001)
- #include "ide.asl"
- }
- }
-}
-*/
-
-/* Some timing tables */
-Name(UDTT, Package(){ /* Udma timing table */
- 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
-})
-
-Name(MDTT, Package(){ /* MWDma timing table */
- 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(POTT, Package(){ /* Pio timing table */
- 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
-})
-
-/* Some timing register value tables */
-Name(MDRT, Package(){ /* MWDma timing register table */
- 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(PORT, Package(){
- 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
-})
-
-OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
- Field(ICRG, AnyAcc, NoLock, Preserve)
-{
- PPTS, 8, /* Primary PIO Slave Timing */
- PPTM, 8, /* Primary PIO Master Timing */
- OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
- PMTM, 8, /* Primary MWDMA Master Timing */
- OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
- OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
- PPSM, 4, /* Primary PIO slave Mode */
- OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
- OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
- PDSM, 4, /* Primary UltraDMA Mode */
-}
-
-Method(GTTM, 1) /* get total time*/
-{
- Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
- Increment(Local0)
- Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
- Increment(Local1)
- Return(Multiply(30, Add(Local0, Local1)))
-}
-
-Device(PRID)
-{
- Name (_ADR, Zero)
- Method(_GTM, 0)
- {
- NAME(OTBF, Buffer(20) { /* out buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
- CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
-
- /* Just return if the channel is disabled */
- If(And(PPCR, 0x01)) { /* primary PIO control */
- Return(OTBF)
- }
-
- /* Always tell them independent timing available and IOChannelReady used on both drives */
- Or(BFFG, 0x1A, BFFG)
-
- /* save total time of primary PIO master timing to PIO spd0 */
- Store(GTTM(PPTM), PSD0)
- /* save total time of primary PIO slave Timing to PIO spd1 */
- Store(GTTM(PPTS), PSD1)
-
- If(And(PDCR, 0x01)) { /* It's under UDMA mode */
- Or(BFFG, 0x01, BFFG)
- Store(DerefOf(Index(UDTT, PDMM)), DSD0)
- }
- Else {
- Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
- }
-
- If(And(PDCR, 0x02)) { /* It's under UDMA mode */
- Or(BFFG, 0x04, BFFG)
- Store(DerefOf(Index(UDTT, PDSM)), DSD1)
- }
- Else {
- Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
- }
-
- Return(OTBF) /* out buffer */
- } /* End Method(_GTM) */
-
- Method(_STM, 3, NotSerialized)
- {
- NAME(INBF, Buffer(20) { /* in buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
- CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(INBF, 16, BFFG) /*buffer flag */
-
- Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
- Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
- Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
- Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
-
- Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
- Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
-
- If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDMM,)
- Or(PDCR, 0x01, PDCR)
- }
- Else {
- If(LNotEqual(DSD0, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTM)
- }
- }
-
- If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDSM,)
- Or(PDCR, 0x02, PDCR)
- }
- Else {
- If(LNotEqual(DSD1, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTS)
- }
- }
- /* Return(INBF) */
- } /*End Method(_STM) */
- Device(MST)
- {
- Name(_ADR, 0)
- Method(_GTF) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xA0, CMDA)
- Store(0xA0, CMDB)
- Store(0xA0, CMDC)
-
- Or(PPMM, 0x08, POMD)
-
- If(And(PDCR, 0x01)) {
- Or(PDMM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTM),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(MST) */
-
- Device(SLAV)
- {
- Name(_ADR, 1)
- Method(_GTF) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xB0, CMDA)
- Store(0xB0, CMDB)
- Store(0xB0, CMDC)
-
- Or(PPSM, 0x08, POMD)
-
- If(And(PDCR, 0x02)) {
- Or(PDSM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTS),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(SLAV) */
-}
-#endif
diff --git a/src/mainboard/hp/abm/acpi/mainboard.asl b/src/mainboard/hp/abm/acpi/mainboard.asl
deleted file mode 100644
index ed97d4e..0000000
--- a/src/mainboard/hp/abm/acpi/mainboard.asl
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Memory related values */
-Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
-Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
-Name(PBLN, 0x0) /* Length of BIOS area */
-
-Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
-Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
-Name(HPBA, 0xFED00000) /* Base address of HPET table */
-
-/* Some global data */
-Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
-Name(OSV, Ones) /* Assume nothing */
-Name(PMOD, One) /* Assume APIC */
-
-/* AcpiGpe0Blk */
-OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
- Field(GP0B, ByteAcc, NoLock, Preserve) { , 11, USBS, 1, }
diff --git a/src/mainboard/hp/abm/acpi/routing.asl b/src/mainboard/hp/abm/acpi/routing.asl
deleted file mode 100644
index 1fb4c1d..0000000
--- a/src/mainboard/hp/abm/acpi/routing.asl
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Advanced Micro Devices, Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
-#include <arch/acpi.h>
-DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001
- )
- {
- #include "routing.asl"
- }
-*/
-
-/* Routing is in System Bus scope */
-Name(PR0, Package(){
- /* NB devices */
- /* Bus 0, Dev 0 - F16 Host Controller */
-
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
- /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */
- Package(){0x0001FFFF, 0, INTB, 0 },
- Package(){0x0001FFFF, 1, INTC, 0 },
-
-
- /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */
- Package(){0x0002FFFF, 0, INTC, 0 },
- Package(){0x0002FFFF, 1, INTD, 0 },
- Package(){0x0002FFFF, 2, INTA, 0 },
- Package(){0x0002FFFF, 3, INTB, 0 },
-
- /* FCH devices */
- /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
- Package(){0x0014FFFF, 0, INTA, 0 },
- Package(){0x0014FFFF, 1, INTB, 0 },
- Package(){0x0014FFFF, 2, INTC, 0 },
- Package(){0x0014FFFF, 3, INTD, 0 },
-
- /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
- /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
- Package(){0x0012FFFF, 0, INTC, 0 },
- Package(){0x0012FFFF, 1, INTB, 0 },
-
- Package(){0x0013FFFF, 0, INTC, 0 },
- Package(){0x0013FFFF, 1, INTB, 0 },
-
- Package(){0x0016FFFF, 0, INTC, 0 },
- Package(){0x0016FFFF, 1, INTB, 0 },
-
- /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
- Package(){0x0010FFFF, 0, INTC, 0 },
- Package(){0x0010FFFF, 1, INTB, 0 },
-
- /* Bus 0, Dev 17 - SATA controller */
- Package(){0x0011FFFF, 0, INTD, 0 },
-
-})
-
-Name(APR0, Package(){
- /* NB devices in APIC mode */
- /* Bus 0, Dev 0 - F15 Host Controller */
-
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
- Package(){0x0001FFFF, 0, 0, 44 },
- Package(){0x0001FFFF, 1, 0, 45 },
-
- /* Bus 0, Dev 2 - PCIe Bridges */
- Package(){0x0002FFFF, 0, 0, 24 },
- Package(){0x0002FFFF, 1, 0, 25 },
- Package(){0x0002FFFF, 2, 0, 26 },
- Package(){0x0002FFFF, 3, 0, 27 },
-
-
- /* SB devices in APIC mode */
- /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
- Package(){0x0014FFFF, 0, 0, 16 },
- Package(){0x0014FFFF, 1, 0, 17 },
- Package(){0x0014FFFF, 2, 0, 18 },
- Package(){0x0014FFFF, 3, 0, 19 },
-
- /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
- /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
- Package(){0x0012FFFF, 0, 0, 18 },
- Package(){0x0012FFFF, 1, 0, 17 },
-
- Package(){0x0013FFFF, 0, 0, 18 },
- Package(){0x0013FFFF, 1, 0, 17 },
-
- Package(){0x0016FFFF, 0, 0, 18 },
- Package(){0x0016FFFF, 1, 0, 17 },
-
- /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
- Package(){0x0010FFFF, 0, 0, 0x12},
- Package(){0x0010FFFF, 1, 0, 0x11},
-
- /* Bus 0, Dev 17 - SATA controller */
- Package(){0x0011FFFF, 0, 0, 19 },
-
-})
-
-Name(PS2, Package(){
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
-})
-Name(APS2, Package(){
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
-})
-
-/* GFX */
-Name(PS4, Package(){
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
-})
-Name(APS4, Package(){
- /* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, 0, 24 },
- Package(){0x0000FFFF, 1, 0, 25 },
- Package(){0x0000FFFF, 2, 0, 26 },
- Package(){0x0000FFFF, 3, 0, 27 },
-})
-
-/* GPP 0 */
-Name(PS5, Package(){
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
-})
-Name(APS5, Package(){
- Package(){0x0000FFFF, 0, 0, 28 },
- Package(){0x0000FFFF, 1, 0, 29 },
- Package(){0x0000FFFF, 2, 0, 30 },
- Package(){0x0000FFFF, 3, 0, 31 },
-})
-
-/* GPP 1 */
-Name(PS6, Package(){
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
-})
-Name(APS6, Package(){
- Package(){0x0000FFFF, 0, 0, 32 },
- Package(){0x0000FFFF, 1, 0, 33 },
- Package(){0x0000FFFF, 2, 0, 34 },
- Package(){0x0000FFFF, 3, 0, 35 },
-})
-
-/* GPP 2 */
-Name(PS7, Package(){
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
-})
-Name(APS7, Package(){
- Package(){0x0000FFFF, 0, 0, 36 },
- Package(){0x0000FFFF, 1, 0, 37 },
- Package(){0x0000FFFF, 2, 0, 38 },
- Package(){0x0000FFFF, 3, 0, 39 },
-})
-
-/* GPP 3 */
-Name(PS8, Package(){
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
-})
-Name(APS8, Package(){
- Package(){0x0000FFFF, 0, 0, 40 },
- Package(){0x0000FFFF, 1, 0, 41 },
- Package(){0x0000FFFF, 2, 0, 42 },
- Package(){0x0000FFFF, 3, 0, 43 },
-})
diff --git a/src/mainboard/hp/abm/acpi/sata.asl b/src/mainboard/hp/abm/acpi/sata.asl
deleted file mode 100644
index 6755258..0000000
--- a/src/mainboard/hp/abm/acpi/sata.asl
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012-2013 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* No SATA functionality */
-
-#if 0
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(SATA) {
- Name(_ADR, 0x00110000)
- #include "sata.asl"
- }
- }
-}
-*/
-
-Name(STTM, Buffer(20) {
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x1f, 0x00, 0x00, 0x00
-})
-
-/* Start by clearing the PhyRdyChg bits */
-Method(_INI) {
- \_GPE._L1F()
-}
-
-Device(PMRY)
-{
- Name(_ADR, 0)
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(PMST) {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P0IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- }/* end of PMST */
-
- Device(PSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P1IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of PSLA */
-} /* end of PMRY */
-
-Device(SEDY)
-{
- Name(_ADR, 1) /* IDE Scondary Channel */
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(SMST)
- {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P2IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SMST */
-
- Device(SSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P3IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SSLA */
-} /* end of SEDY */
-
-/* SATA Hot Plug Support */
-Scope(\_GPE) {
- Method(_L1F,0x0,NotSerialized) {
- if (\_SB.P0PR) {
- if (LGreater(\_SB.P0IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P0PR)
- }
-
- if (\_SB.P1PR) {
- if (LGreater(\_SB.P1IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P1PR)
- }
-
- if (\_SB.P2PR) {
- if (LGreater(\_SB.P2IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P2PR)
- }
-
- if (\_SB.P3PR) {
- if (LGreater(\_SB.P3IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P3PR)
- }
- }
-}
-#endif
diff --git a/src/mainboard/hp/abm/acpi/si.asl b/src/mainboard/hp/abm/acpi/si.asl
deleted file mode 100644
index 2923471..0000000
--- a/src/mainboard/hp/abm/acpi/si.asl
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Scope(\_SI) {
- Method(_SST, 1) {
- /* DBGO("\\_SI\\_SST\n") */
- /* DBGO(" New Indicator state: ") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
- }
-} /* End Scope SI */
diff --git a/src/mainboard/hp/abm/acpi/sleep.asl b/src/mainboard/hp/abm/acpi/sleep.asl
deleted file mode 100644
index 1225a62..0000000
--- a/src/mainboard/hp/abm/acpi/sleep.asl
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Wake status package */
-Name(WKST,Package(){Zero, Zero})
-
-/*
-* \_PTS - Prepare to Sleep method
-*
-* Entry:
-* Arg0=The value of the sleeping state S1=1, S2=2, etc
-*
-* Exit:
-* -none-
-*
-* The _PTS control method is executed at the beginning of the sleep process
-* for S1-S5. The sleeping value is passed to the _PTS control method. This
-* control method may be executed a relatively long time before entering the
-* sleep state and the OS may abort the operation without notification to
-* the ACPI driver. This method cannot modify the configuration or power
-* state of any device in the system.
-*/
-
-External(\_SB.APTS, MethodObj)
-External(\_SB.AWAK, MethodObj)
-
-Method(_PTS, 1) {
- /* DBGO("\\_PTS\n") */
- /* DBGO("From S0 to S") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
-
- /* Clear wake status structure. */
- Store(0, Index(WKST,0))
- Store(0, Index(WKST,1))
- Store(7, UPWS)
- \_SB.APTS(Arg0)
-} /* End Method(\_PTS) */
-
-/*
-* \_BFS OEM Back From Sleep method
-*
-* Entry:
-* Arg0=The value of the sleeping state S1=1, S2=2
-*
-* Exit:
-* -none-
-*/
-Method(\_BFS, 1) {
- /* DBGO("\\_BFS\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
-}
-
-/*
-* \_WAK System Wake method
-*
-* Entry:
-* Arg0=The value of the sleeping state S1=1, S2=2
-*
-* Exit:
-* Return package of 2 DWords
-* Dword 1 - Status
-* 0x00000000 wake succeeded
-* 0x00000001 Wake was signaled but failed due to lack of power
-* 0x00000002 Wake was signaled but failed due to thermal condition
-* Dword 2 - Power Supply state
-* if non-zero the effective S-state the power supply entered
-*/
-Method(\_WAK, 1) {
- /* DBGO("\\_WAK\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
- Store(1,USBS)
-
- \_SB.AWAK(Arg0)
-
- Return(WKST)
-} /* End Method(\_WAK) */
diff --git a/src/mainboard/hp/abm/acpi/superio.asl b/src/mainboard/hp/abm/acpi/superio.asl
deleted file mode 100644
index e69de29..0000000
--- a/src/mainboard/hp/abm/acpi/superio.asl
+++ /dev/null
diff --git a/src/mainboard/hp/abm/acpi/thermal.asl b/src/mainboard/hp/abm/acpi/thermal.asl
deleted file mode 100644
index e69de29..0000000
--- a/src/mainboard/hp/abm/acpi/thermal.asl
+++ /dev/null
diff --git a/src/mainboard/hp/abm/acpi/usb_oc.asl b/src/mainboard/hp/abm/acpi/usb_oc.asl
deleted file mode 100644
index c020216..0000000
--- a/src/mainboard/hp/abm/acpi/usb_oc.asl
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* simple name description */
-/*
-#include <arch/acpi.h>
-DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001
- )
- {
- #include "usb.asl"
- }
-*/
-
-/* USB overcurrent mapping pins. */
-Name(UOM0, 0)
-Name(UOM1, 2)
-Name(UOM2, 0)
-Name(UOM3, 7)
-Name(UOM4, 2)
-Name(UOM5, 2)
-Name(UOM6, 6)
-Name(UOM7, 2)
-Name(UOM8, 6)
-Name(UOM9, 6)
-
-/* USB Overcurrent GPEs */
-
-#if 0 /* TODO: Update */
-Method(UCOC, 0) {
- Sleep(20)
- Store(0x13,CMTI)
- Store(0,GPSL)
-}
-
-/* USB Port 0 overcurrent uses Gpm 0 */
-If(LLessEqual(UOM0,9)) {
- Scope (\_GPE) {
- Method (_L13) {
- }
- }
-}
-
-/* USB Port 1 overcurrent uses Gpm 1 */
-If (LLessEqual(UOM1,9)) {
- Scope (\_GPE) {
- Method (_L14) {
- }
- }
-}
-
-/* USB Port 2 overcurrent uses Gpm 2 */
-If (LLessEqual(UOM2,9)) {
- Scope (\_GPE) {
- Method (_L15) {
- }
- }
-}
-
-/* USB Port 3 overcurrent uses Gpm 3 */
-If (LLessEqual(UOM3,9)) {
- Scope (\_GPE) {
- Method (_L16) {
- }
- }
-}
-
-/* USB Port 4 overcurrent uses Gpm 4 */
-If (LLessEqual(UOM4,9)) {
- Scope (\_GPE) {
- Method (_L19) {
- }
- }
-}
-
-/* USB Port 5 overcurrent uses Gpm 5 */
-If (LLessEqual(UOM5,9)) {
- Scope (\_GPE) {
- Method (_L1A) {
- }
- }
-}
-
-/* USB Port 6 overcurrent uses Gpm 6 */
-If (LLessEqual(UOM6,9)) {
- Scope (\_GPE) {
- /* Method (_L1C) { */
- Method (_L06) {
- }
- }
-}
-
-/* USB Port 7 overcurrent uses Gpm 7 */
-If (LLessEqual(UOM7,9)) {
- Scope (\_GPE) {
- /* Method (_L1D) { */
- Method (_L07) {
- }
- }
-}
-
-/* USB Port 8 overcurrent uses Gpm 8 */
-If (LLessEqual(UOM8,9)) {
- Scope (\_GPE) {
- Method (_L17) {
- }
- }
-}
-
-/* USB Port 9 overcurrent uses Gpm 9 */
-If (LLessEqual(UOM9,9)) {
- Scope (\_GPE) {
- Method (_L0E) {
- }
- }
-}
-#endif
diff --git a/src/mainboard/hp/abm/acpi_tables.c b/src/mainboard/hp/abm/acpi_tables.c
deleted file mode 100644
index 20509e9..0000000
--- a/src/mainboard/hp/abm/acpi_tables.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/acpi.h>
-#include <arch/ioapic.h>
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
- /* create all subtables for processors */
- current = acpi_create_madt_lapics(current);
-
- /* Write SB800 IOAPIC, only one */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
- IO_APIC_ADDR, 0);
-
- /* TODO: Remove the hardcode */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
- 0xFEC20000, 24);
-
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 0);
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9, 0xF);
- /* 0: mean bus 0--->ISA */
- /* 0: PIC 0 */
- /* 2: APIC 2 */
- /* 5 mean: 0101 --> Edge-triggered, Active high */
-
- /* create all subtables for processors */
- current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
- /* 1: LINT1 connect to NMI */
-
- return current;
-}
diff --git a/src/mainboard/hp/abm/board_info.txt b/src/mainboard/hp/abm/board_info.txt
deleted file mode 100644
index 38fedd5..0000000
--- a/src/mainboard/hp/abm/board_info.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-Category: mini
-ROM package: SOIC8
-ROM protocol: SPI
-ROM socketed: y
-Flashrom support: y
diff --git a/src/mainboard/hp/abm/buildOpts.c b/src/mainboard/hp/abm/buildOpts.c
deleted file mode 100644
index bc1b172..0000000
--- a/src/mainboard/hp/abm/buildOpts.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/**
- * @file
- *
- * AMD User options selection for a Brazos platform solution system
- *
- * This file is placed in the user's platform directory and contains the
- * build option selections desired for that platform.
- *
- * For Information about this file, see @ref platforminstall.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: AGESA
- * @e sub-project: Core
- * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
- */
-
-#include <stdlib.h>
-#include <AGESA.h>
-
-#define INSTALL_FT3_SOCKET_SUPPORT TRUE
-#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE
-
-#define INSTALL_G34_SOCKET_SUPPORT FALSE
-#define INSTALL_C32_SOCKET_SUPPORT FALSE
-#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
-#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
-#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
-#define INSTALL_FS1_SOCKET_SUPPORT FALSE
-#define INSTALL_FM1_SOCKET_SUPPORT FALSE
-#define INSTALL_FP2_SOCKET_SUPPORT FALSE
-#define INSTALL_FT1_SOCKET_SUPPORT FALSE
-#define INSTALL_AM3_SOCKET_SUPPORT FALSE
-#define INSTALL_FM2_SOCKET_SUPPORT FALSE
-
-
-#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT
- #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE
- #undef INSTALL_FT3_SOCKET_SUPPORT
- #define INSTALL_FT3_SOCKET_SUPPORT FALSE
- #endif
-#endif
-
-//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE
-//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
-#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE
-//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE
-//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE
-//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
-#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
-#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE
-#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
-//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE
-#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
-//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
-#define BLDOPT_REMOVE_SRAT FALSE //TRUE
-#define BLDOPT_REMOVE_SLIT FALSE //TRUE
-#define BLDOPT_REMOVE_WHEA FALSE //TRUE
-#define BLDOPT_REMOVE_CRAT TRUE
-#define BLDOPT_REMOVE_CDIT TRUE
-#define BLDOPT_REMOVE_DMI TRUE
-//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE
-//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE
-
-//This element selects whether P-States should be forced to be independent,
-// as reported by the ACPI _PSD object. For single-link processors,
-// setting TRUE for OS to support this feature.
-
-//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE
-
-#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
-#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
-/* Build configuration values here.
- */
-#define BLDCFG_VRM_CURRENT_LIMIT 15000
-#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000
-#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000
-#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT
-#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000
-#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT
-#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0
-#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0
-#define BLDCFG_VRM_SLEW_RATE 10000
-#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE
-#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
-
-#define BLDCFG_PLAT_NUM_IO_APICS 3
-#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000
-#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
-#define BLDCFG_MEM_INIT_PSTATE 0
-#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the
- // core for C-state entry requests. A value
- // of 0 in this field specifies that the core
- // does not trap any IO addresses for C-state entry.
- // Values greater than 0xFFF8 results in undefined behavior.
-#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770
-
-#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
-
-#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY
-#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
-#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
-#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
-#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE
-#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE
-#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
-#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
-#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
-#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE
-#define BLDCFG_MEMORY_POWER_DOWN TRUE
-#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
-#define BLDCFG_ONLINE_SPARE FALSE
-#define BLDCFG_BANK_SWIZZLE TRUE
-#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
-#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY
-#define BLDCFG_DQS_TRAINING_CONTROL TRUE
-#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
-#define BLDCFG_USE_BURST_MODE FALSE
-#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
-#define BLDCFG_ENABLE_ECC_FEATURE TRUE
-#define BLDCFG_ECC_REDIRECTION FALSE
-#define BLDCFG_SCRUB_DRAM_RATE 0
-#define BLDCFG_SCRUB_L2_RATE 0
-#define BLDCFG_SCRUB_L3_RATE 0
-#define BLDCFG_SCRUB_IC_RATE 0
-#define BLDCFG_SCRUB_DC_RATE 0
-#define BLDCFG_ECC_SYNC_FLOOD TRUE
-#define BLDCFG_ECC_SYMBOL_SIZE 4
-#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul
-#define BLDCFG_1GB_ALIGN FALSE
-#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED
-#define BLDCFG_UMA_ALLOCATION_MODE UMA_NONE
-#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled
-#define BLDCFG_IOMMU_SUPPORT FALSE
-#define OPTION_GFX_INIT_SVIEW FALSE
-//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife
-
-//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL
-#define BLDCFG_CFG_ABM_SUPPORT TRUE
-
-#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
-//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID
-//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID
-//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID
-
-#ifdef PCIEX_BASE_ADDRESS
-#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS
-#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20)
-#endif
-
-#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P'
-#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
-#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed
-
-/* Process the options...
- * This file include MUST occur AFTER the user option selection settings
- */
-/*
- * Customized OEM build configurations for FCH component
- */
-// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00
-// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20
-// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00
-// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400
-// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404
-// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408
-// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410
-// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420
-// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000
-// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000
-// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000
-// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0
-// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00
-// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000
-// #define BLDCFG_AZALIA_SSID 0x780D1022
-// #define BLDCFG_SMBUS_SSID 0x780B1022
-// #define BLDCFG_IDE_SSID 0x780C1022
-// #define BLDCFG_SATA_AHCI_SSID 0x78011022
-// #define BLDCFG_SATA_IDE_SSID 0x78001022
-// #define BLDCFG_SATA_RAID5_SSID 0x78031022
-// #define BLDCFG_SATA_RAID_SSID 0x78021022
-// #define BLDCFG_EHCI_SSID 0x78081022
-// #define BLDCFG_OHCI_SSID 0x78071022
-// #define BLDCFG_LPC_SSID 0x780E1022
-// #define BLDCFG_SD_SSID 0x78061022
-// #define BLDCFG_XHCI_SSID 0x78121022
-// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE
-// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
-// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4
-// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE
-// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE
-// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE
-// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE
-// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE
-// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE
-// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE
-// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE
-
-CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] =
-{
- { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
- { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
- { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
- { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
- { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
- { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
- { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
- { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
- { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
- { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
- { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
- { CPU_LIST_TERMINAL }
-};
-
-#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList
-
-
-/* Include the files that instantiate the configuration definitions. */
-#include "cpuRegisters.h"
-#include "cpuFamRegisters.h"
-#include "cpuFamilyTranslation.h"
-#include "AdvancedApi.h"
-#include "heapManager.h"
-#include "CreateStruct.h"
-#include "cpuFeatures.h"
-#include "Table.h"
-#include "cpuEarlyInit.h"
-#include "cpuLateInit.h"
-#include "GnbInterface.h"
-
- // This is the delivery package title, "BrazosPI"
- // This string MUST be exactly 8 characters long
-#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
-
- // This is the release version number of the AGESA component
- // This string MUST be exactly 12 characters long
-#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}
-
-/* MEMORY_BUS_SPEED */
-//#define DDR400_FREQUENCY 200 ///< DDR 400
-//#define DDR533_FREQUENCY 266 ///< DDR 533
-//#define DDR667_FREQUENCY 333 ///< DDR 667
-//#define DDR800_FREQUENCY 400 ///< DDR 800
-//#define DDR1066_FREQUENCY 533 ///< DDR 1066
-//#define DDR1333_FREQUENCY 667 ///< DDR 1333
-//#define DDR1600_FREQUENCY 800 ///< DDR 1600
-//#define DDR1866_FREQUENCY 933 ///< DDR 1866
-//#define DDR2100_FREQUENCY 1050 ///< DDR 2100
-//#define DDR2133_FREQUENCY 1066 ///< DDR 2133
-//#define DDR2400_FREQUENCY 1200 ///< DDR 2400
-//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency
-//
-///* QUANDRANK_TYPE*/
-//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
-//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
-//
-///* USER_MEMORY_TIMING_MODE */
-//#define TIMING_MODE_AUTO 0 ///< Use best rate possible
-//#define TIMING_MODE_LIMITED 1 ///< Set user top limit
-//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
-//
-///* POWER_DOWN_MODE */
-//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
-//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
-
-/*
- * Agesa optional capabilities selection.
- * Uncomment and mark FALSE those features you wish to include in the build.
- * Comment out or mark TRUE those features you want to REMOVE from the build.
- */
-
-#define DFLT_SMBUS0_BASE_ADDRESS 0xB00
-#define DFLT_SMBUS1_BASE_ADDRESS 0xB20
-#define DFLT_SIO_PME_BASE_ADDRESS 0xE00
-#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800
-#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804
-#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808
-#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810
-#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820
-#define DFLT_SPI_BASE_ADDRESS 0xFEC10000
-#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0
-#define DFLT_HPET_BASE_ADDRESS 0xFED00000
-#define DFLT_SMI_CMD_PORT 0xB0
-#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00
-#define DFLT_GEC_BASE_ADDRESS 0xFED61000
-#define DFLT_AZALIA_SSID 0x780D1022
-#define DFLT_SMBUS_SSID 0x780B1022
-#define DFLT_IDE_SSID 0x780C1022
-#define DFLT_SATA_AHCI_SSID 0x78011022
-#define DFLT_SATA_IDE_SSID 0x78001022
-#define DFLT_SATA_RAID5_SSID 0x78031022
-#define DFLT_SATA_RAID_SSID 0x78021022
-#define DFLT_EHCI_SSID 0x78081022
-#define DFLT_OHCI_SSID 0x78071022
-#define DFLT_LPC_SSID 0x780E1022
-#define DFLT_SD_SSID 0x78061022
-#define DFLT_XHCI_SSID 0x78121022
-#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE
-#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
-#define DFLT_FCH_GPP_LINK_CONFIG PortA4
-#define DFLT_FCH_GPP_PORT0_PRESENT FALSE
-#define DFLT_FCH_GPP_PORT1_PRESENT FALSE
-#define DFLT_FCH_GPP_PORT2_PRESENT FALSE
-#define DFLT_FCH_GPP_PORT3_PRESENT FALSE
-#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE
-#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE
-#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE
-#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
-//#define BLDCFG_IR_PIN_CONTROL 0x33
-
-GPIO_CONTROL hp_abm_gpio[] = {
- { 45, Function2, GpioOutEnB | Sticky }, // Signal input APU_SD_LED
- { 49, Function2, PullUpB | PullDown | Sticky }, // Signal output APU_ABM_LED_UID
- { 50, Function2, PullUpB | PullDown | Sticky }, // Signal output APU_ABM_LED_HEALTH
- { 51, Function2, GpioOut | PullUpB | PullDown | Sticky }, // Signal output APU_ABM_LED_FAULT
- { 57, Function2, GpioOutEnB | Sticky }, // Signal input SATA_PRSNT_L
- { 58, Function2, GpioOutEnB | Sticky }, // Signal i/o APU_HDMI_CEC
- { 64, Function2, GpioOutEnB | Sticky }, // Signal input SWC_APU_INT_L
- { 68, Function0, GpioOutEnB | Sticky }, // Signal input CNTRL1_PRSNT
- { 69, Function0, GpioOutEnB | Sticky }, // Signal input CNTRL2_PRSNT
- { 71, Function0, GpioOut | PullUpB | PullDown | Sticky }, // Signal output APU_PROCHOT_L_R
- {-1}
-};
-#define BLDCFG_FCH_GPIO_CONTROL_LIST (&hp_abm_gpio[0])
-
-// The following definitions specify the default values for various parameters in which there are
-// no clearly defined defaults to be used in the common file. The values below are based on product
-// and BKDG content, please consult the AGESA Memory team for consultation.
-#define DFLT_SCRUB_DRAM_RATE (0)
-#define DFLT_SCRUB_L2_RATE (0)
-#define DFLT_SCRUB_L3_RATE (0)
-#define DFLT_SCRUB_IC_RATE (0)
-#define DFLT_SCRUB_DC_RATE (0)
-#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
-#define DFLT_VRM_SLEW_RATE (5000)
-
-#include <PlatformInstall.h>
diff --git a/src/mainboard/hp/abm/cmos.layout b/src/mainboard/hp/abm/cmos.layout
deleted file mode 100644
index e1dbd9a..0000000
--- a/src/mainboard/hp/abm/cmos.layout
+++ /dev/null
@@ -1,66 +0,0 @@
-#*****************************************************************************
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2012 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#*****************************************************************************
-
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 400Mhz
-8 1 333Mhz
-8 2 266Mhz
-8 3 200Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/hp/abm/devicetree.cb b/src/mainboard/hp/abm/devicetree.cb
deleted file mode 100644
index cd0b354..0000000
--- a/src/mainboard/hp/abm/devicetree.cb
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2013 Advanced Micro Devices, Inc.
-# Copyright (C) 2014 Sage Electronic Engineering, LLC
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-chip northbridge/amd/agesa/family16kb/root_complex
- device cpu_cluster 0 on
- chip cpu/amd/agesa/family16kb
- device lapic 0 on end
- end
- end
-
- device domain 0 on
- subsystemid 0x1022 0x1410 inherit
- chip northbridge/amd/agesa/family16kb
- device pci 0.0 on end # Root Complex
- device pci 1.0 on end # Internal Graphics P2P bridge 0x9804
- device pci 1.1 on end # Internal Multimedia
- device pci 2.0 on end # PCIe Host Bridge
- device pci 2.1 off end # unused
- device pci 2.2 on end # GPP0: NIC
- device pci 2.3 on end # GPP1: NIC
- device pci 2.4 off end # GPP2: unused
- device pci 2.5 off end # GPP3: unused
- end #chip northbridge/amd/agesa/family16kb
-
- chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
- device pci 11.0 on end # SATA
- device pci 12.0 on end # USB
- device pci 12.2 on end # USB
- device pci 13.0 on end # USB
- device pci 13.2 on end # USB
- device pci 14.0 on end # SM
- device pci 14.2 off end # HDA 0x4383
- device pci 14.3 on # LPC 0x439d
- chip superio/nuvoton/nct5104d
- device pnp 4e.0 off end # FDC
- device pnp 4e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 4e.7 off end # GPIO
- device pnp 4e.8 off end # GPIO/WDT
- device pnp 4e.f off end # GPIO
- device pnp 4e.10 off end # COM3 used by port 80
- device pnp 4e.11 on # COM4
- io 0x60 = 0x2e8
- irq 0x70 = 3
- end
- device pnp 4e.14 off end # PORT80
- register "irq_trigger_type" = "0" # 0 edge, 1 level
- end # nct5104d
- end #LPC
- device pci 14.7 off end # SD
- device pci 16.0 on end # USB
- device pci 16.2 on end # USB
- end #chip southbridge/amd/agesa/hudson
-
- chip northbridge/amd/agesa/family16kb
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- device pci 18.5 on end
- register "spdAddrLookup" = "
- {
- { {0xA0, 0x00}, {0x00, 0x00}, }, // socket 0 - Channel 0 - 8-bit SPD addresses
- }"
- end
-
- end #domain
-end #northbridge/amd/agesa/family16kb/root_complex
diff --git a/src/mainboard/hp/abm/dsdt.asl b/src/mainboard/hp/abm/dsdt.asl
deleted file mode 100644
index c4fc934..0000000
--- a/src/mainboard/hp/abm/dsdt.asl
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Advanced Micro Devices, Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* DefinitionBlock Statement */
-#include <arch/acpi.h>
-DefinitionBlock (
- "DSDT.AML", /* Output filename */
- "DSDT", /* Signature */
- 0x02, /* DSDT Revision, needs to be 2 for 64bit */
- OEM_ID,
- ACPI_TABLE_CREATOR,
- 0x00010001 /* OEM Revision */
- )
-{ /* Start of ASL file */
- /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
-
- /* Globals for the platform */
- #include "acpi/mainboard.asl"
-
- /* Describe the USB Overcurrent pins */
- #include "acpi/usb_oc.asl"
-
- /* PCI IRQ mapping for the Southbridge */
- #include <southbridge/amd/agesa/hudson/acpi/pcie.asl>
-
- /* Describe the processor tree (\_PR) */
- #include <cpu/amd/agesa/family16kb/acpi/cpu.asl>
-
- /* Contains the supported sleep states for this chipset */
- #include <southbridge/amd/common/acpi/sleepstates.asl>
-
- /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
- #include "acpi/sleep.asl"
-
- /* System Bus */
- Scope(\_SB) { /* Start \_SB scope */
- /* global utility methods expected within the \_SB scope */
- #include <arch/x86/acpi/globutil.asl>
-
- /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
- #include "acpi/routing.asl"
-
- Device(PWRB) {
- Name(_HID, EISAID("PNP0C0C"))
- Name(_UID, 0xAA)
- Name(_PRW, Package () {3, 0x04})
- Name(_STA, 0x0B)
- }
-
- Device(PCI0) {
- /* Describe the AMD Northbridge */
- #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl>
-
- /* Describe the AMD Fusion Controller Hub Southbridge */
- #include <southbridge/amd/agesa/hudson/acpi/fch.asl>
- }
-
- /* Describe PCI INT[A-H] for the Southbridge */
- #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
-
- } /* End \_SB scope */
-
- /* Describe SMBUS for the Southbridge */
- #include <southbridge/amd/agesa/hudson/acpi/smbus.asl>
-
- /* Define the General Purpose Events for the platform */
- #include "acpi/gpe.asl"
-
- /* Define the Thermal zones and methods for the platform */
- #include "acpi/thermal.asl"
-
- /* Define the System Indicators for the platform */
- #include "acpi/si.asl"
-}
-/* End of ASL file */
diff --git a/src/mainboard/hp/abm/irq_tables.c b/src/mainboard/hp/abm/irq_tables.c
deleted file mode 100644
index 530c132..0000000
--- a/src/mainboard/hp/abm/irq_tables.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
- u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
- u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
- u8 slot, u8 rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- u32 slot_num;
- u8 *v;
-
- u8 sum = 0;
- int i;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (u8 *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = 0;
- pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1002;
- pirq->rtr_device = 0x4384;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-
- /* pci bridge */
- write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
- 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
- 0);
- pirq_info++;
-
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "write_pirq_routing_table done.\n");
-
- return (unsigned long)pirq_info;
-}
diff --git a/src/mainboard/hp/abm/mainboard.c b/src/mainboard/hp/abm/mainboard.c
deleted file mode 100644
index aaa899b..0000000
--- a/src/mainboard/hp/abm/mainboard.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-
-#include <southbridge/amd/common/amd_pci_util.h>
-#include <southbridge/amd/agesa/hudson/pci_devs.h>
-#include <northbridge/amd/agesa/family16kb/pci_devs.h>
-
-/***********************************************************
- * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
- * This table is responsible for physically routing the PIC and
- * IOAPIC IRQs to the different PCI devices on the system. It
- * is read and written via registers 0xC00/0xC01 as an
- * Index/Data pair. These values are chipset and mainboard
- * dependent and should be updated accordingly.
- *
- * These values are used by the PCI configuration space,
- * MP Tables. TODO: Make ACPI use these values too.
- */
-static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
- [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, /* INTA# - INTH# */
- [0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,0x0A, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon, SD */
- [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */
- [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, /* USB Devs 18/19/20/22 INTA-C */
- [0x40] = 0x0B,0x0B, /* IDE, SATA */
-};
-
-static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
- [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
- [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x10, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */
- [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */
- [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, /* USB Devs 18/19/22/20 INTA-C */
- [0x40] = 0x11,0x13, /* IDE, SATA */
-};
-
-/*
- * This table defines the index into the picr/intr_data
- * tables for each device. Any enabled device and slot
- * that uses hardware interrupts should have an entry
- * in this table to define its index into the FCH
- * PCI_INTR register 0xC00/0xC01. This index will define
- * the interrupt that it should use. Putting PIRQ_A into
- * the PIN A index for a device will tell that device to
- * use PIC IRQ 10 if it uses PIN A for its hardware INT.
- */
-static const struct pirq_struct mainboard_pirq_data[] = {
- /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
- {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */
- {NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.2 */
- {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.3 */
- {NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.4 */
- {NB_PCIE_PORT5_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.5 */
- {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */
- {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */
- {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */
- {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */
- {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */
- {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */
- {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */
- {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCIB: 14.4 */
- {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */
- {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */
- {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */
-};
-
-/* PIRQ Setup */
-static void pirq_setup(void)
-{
- pirq_data_ptr = mainboard_pirq_data;
- pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
- intr_data_ptr = mainboard_intr_data;
- picr_data_ptr = mainboard_picr_data;
-}
-
-/**********************************************
- * Enable the dedicated functions of the board.
- **********************************************/
-static void mainboard_enable(struct device *dev)
-{
- printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
-
- /* Initialize the PIRQ data structures for consumption */
- pirq_setup();
-}
-
-struct chip_operations mainboard_ops = {
- .enable_dev = mainboard_enable,
-};
diff --git a/src/mainboard/hp/abm/mptable.c b/src/mainboard/hp/abm/mptable.c
deleted file mode 100644
index 52374f1..0000000
--- a/src/mainboard/hp/abm/mptable.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/smp/mpspec.h>
-#include <arch/io.h>
-#include <arch/ioapic.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/x86/lapic.h>
-#include <southbridge/amd/agesa/hudson/hudson.h>
-
-u8 picr_data[0x54] = {
- 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
- 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x03,0x04,0x05,0x07
-};
-u8 intr_data[0x54] = {
- 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
- 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x10,0x11,0x12,0x13
-};
-
-static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned int length)
-{
- mc->mpc_length += length;
- mc->mpc_entry_count++;
-}
-
-static void my_smp_write_bus(struct mp_config_table *mc,
- unsigned char id, const char *bustype)
-{
- struct mpc_config_bus *mpc;
- mpc = smp_next_mpc_entry(mc);
- memset(mpc, '\0', sizeof(*mpc));
- mpc->mpc_type = MP_BUS;
- mpc->mpc_busid = id;
- memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
- smp_add_mpc_entry(mc, sizeof(*mpc));
-}
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- int bus_isa;
- u8 byte;
-
- /*
- * By the time this function gets called, the IOAPIC registers
- * have been written so they can be read to get the correct
- * APIC ID and Version
- */
- u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
- u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
- memcpy(mc->mpc_oem, "AMD ", 8);
-
- smp_write_processors(mc);
-
- //mptable_write_buses(mc, NULL, &bus_isa);
- my_smp_write_bus(mc, 0, "PCI ");
- my_smp_write_bus(mc, 1, "PCI ");
- bus_isa = 0x02;
- my_smp_write_bus(mc, bus_isa, "ISA ");
-
- /* I/O APICs: APIC ID Version State Address */
- smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
-
- smp_write_ioapic(mc, ioapic_id+1, 0x21, (void *)0xFEC20000);
- /* PIC IRQ routine */
- for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
- outb(byte, 0xC00);
- outb(picr_data[byte], 0xC01);
- }
-
- /* APIC IRQ routine */
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
-
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
- mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
-
- /* PCI interrupts are level triggered, and are
- * associated with a specific bus/device/function tuple.
- */
-#define PCI_INT(bus, dev, int_sign, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin))
-
- /* Internal VGA */
- PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
- PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
-
- /* SMBUS */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
-
- /* HD Audio */
- PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]);
-
- /* USB */
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]);
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
- PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]);
-
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]);
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
-
- /* on board NIC & Slot PCIE. */
-
- /* PCI slots */
- struct device *dev = pcidev_on_root(0x14, 4);
- if (dev && dev->enabled) {
- u8 bus_pci = dev->link_list->secondary;
- /* PCI_SLOT 0. */
- PCI_INT(bus_pci, 0x5, 0x0, 0x14);
- PCI_INT(bus_pci, 0x5, 0x1, 0x15);
- PCI_INT(bus_pci, 0x5, 0x2, 0x16);
- PCI_INT(bus_pci, 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_pci, 0x6, 0x0, 0x15);
- PCI_INT(bus_pci, 0x6, 0x1, 0x16);
- PCI_INT(bus_pci, 0x6, 0x2, 0x17);
- PCI_INT(bus_pci, 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_pci, 0x7, 0x0, 0x16);
- PCI_INT(bus_pci, 0x7, 0x1, 0x17);
- PCI_INT(bus_pci, 0x7, 0x2, 0x14);
- PCI_INT(bus_pci, 0x7, 0x3, 0x15);
- }
-
- /* PCIe Lan*/
- PCI_INT(0x0, 0x06, 0x0, 0x13);
-
- /* FCH PCIe PortA */
- PCI_INT(0x0, 0x15, 0x0, 0x10);
- /* FCH PCIe PortB */
- PCI_INT(0x0, 0x15, 0x1, 0x11);
- /* FCH PCIe PortC */
- PCI_INT(0x0, 0x15, 0x2, 0x12);
- /* FCH PCIe PortD */
- PCI_INT(0x0, 0x15, 0x3, 0x13);
-
- /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
- IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/hp/abm/romstage.c b/src/mainboard/hp/abm/romstage.c
deleted file mode 100644
index d7322c9..0000000
--- a/src/mainboard/hp/abm/romstage.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-#include <device/pci_ops.h>
-#include <northbridge/amd/agesa/state_machine.h>
-#include <southbridge/amd/agesa/hudson/hudson.h>
-#include <superio/nuvoton/common/nuvoton.h>
-#include <superio/nuvoton/nct5104d/nct5104d.h>
-
-#define SERIAL_DEV PNP_DEV(0x4E, NCT5104D_SP4)
-
-void board_BeforeAgesa(struct sysinfo *cb)
-{
- u32 *addr32;
- u32 t32;
-
- /* For serial port option, plug-in card on LPC. */
- pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
- pci_write_config32(dev, 0x44, 0xff03ffd5);
-
- /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
- * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA
- * even though the register is not documented in the Kabini BKDG.
- * Otherwise the serial output is bad code.
- */
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
-
-
- /* Enable the AcpiMmio space */
- outb(0x24, 0xcd6);
- outb(0x01, 0xcd7);
-
- /* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */
- /* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */
- addr32 = (u32 *)0xfed80e28;
- t32 = *addr32;
- t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16]
- t32 |= 0x00010000; // Set bit 16 for 25MHz
- *addr32 = t32;
-
- /* Enable Auxiliary OSCOUT1/OSCOUT2 */
- addr32 = (u32 *)0xfed80e40;
- t32 = *addr32;
- t32 &= 0xffffff7b; // clear 2, 7
- *addr32 = t32;
-
- nct5104d_enable_uartd(SERIAL_DEV);
- nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-}
-
-#if 0
- /* Was before copy_and_run. */
- outb(0xEA, 0xCD6);
- outb(0x1, 0xcd7);
-#endif
To view, visit change 38104. To unsubscribe, or for help writing mail filters, visit settings.