Attention is currently required from: Selma Bensaid, Paul Menzel, Bernardo Perez Priego, Andy Yeh, kiran2.kumar@intel.com, ShawnX Tu.
Bernardo Perez Priego uploaded patch set #8 to this change.
mb/google/brya: Update camera NVM parameters
Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.
BUG=b:203014972
Test= Boot board and issue commands:
`cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom > ./brya_imx208_eeprom.bin`
`hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
You should see the result in brya_imx208_eeprom_dump.log to be same as module
nvm file by vendor provided or meet the Intel nvm calibration format.
(e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
---
M src/mainboard/google/brya/variants/brya0/overridetree.cb
1 file changed, 4 insertions(+), 3 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/58374/8
To view, visit change 58374. To unsubscribe, or for help writing mail filters, visit settings.