2 comments:
File src/mainboard/google/hatch/variants/akemi/gpio.c:
/* F3 : MEM_STRAP_3 */
PAD_CFG_GPI(GPP_F3, NONE, PLTRST),
/* F10 : MEM_STRAP_2 */
PAD_CFG_GPI(GPP_F10, NONE, PLTRST),
The MEM_STRAP_* pins are not required to be in the early_gpio_table.
Can you remove all 4 and then add this comment above the declaration?
/*
* GPIOs configured before ramstage
* Note: the Hatch platform's romstage will configure
* the MEM_STRAP_* (a.k.a GPIO_MEM_CONFIG_*) pins
* as inputs before it reads them, so they are not
* needed in this table.
*/
/* H19 : MEM_STRAP_0 */
PAD_CFG_GPI(GPP_H19, NONE, PLTRST),
/* H22 : MEM_STRAP_1 */
PAD_CFG_GPI(GPP_H22, NONE, PLTRST),
See above, these are not required
To view, visit change 33824. To unsubscribe, or for help writing mail filters, visit settings.