Federico Amedeo Izzo has uploaded this change for review.
mb/aoostar: Add AOOSTAR R1 (WTR_R1)
AOOSTAR R1 is a Chinese NAS based on Intel N100 (Alder Lake N), with two 3.5" HDD slots,
an M.2 NVMe 2280 SSD slot and a single DDR4 SODIMM slot.
It also comes with 2x 2.5Gb Intel NICs, Intel AX200 WiFi + BT and USB-C Alt-DP Power Delivery.
Working:
- Automatic FAN control (IT8613E SuperIO)
- M.2 NVME slot
- 2x SATA ports
- 2.0 USB ports
- USB-C port with Alt-DP and PD
- HDMI / DisplayPort ports
- 2x 2.5Gb NICs
- WiFi + BT
- ASPM (Unavailable on stock)
- Linux/Windows UEFI booting with EDK2
Broken:
- Power button (OFF->ON broken, ON->OFF works)
- USB 3.0 ports
Untested:
- Internal audio
- MicroSD card reader
- S3
My motivation for doing this port is enabling ASPM, as it makes a great difference on
idle power consumption (from 8.4W to 5W measured from the wall).
The last remaining annoyance of this port is the power button not working.
I spent a few hours double checking the SuperIO registers but then I gave up.
A workaround for this is to use the "ON after power loss" feature and reconnect the power cord
to turn on the board. It's not a big problem for a NAS that will stay ON 24/7.
Compiled with IFD descriptor, ME blob and vgabios blob (ID 8086,0406) extracted from vendor BIOS.
The board can be flashed externally using a 1.8V adapter, I used a CH341a modded for 3.3V I/O.
Internal flashing could work too as SPI flash is not read/write protected, but I haven't tried.
Change-Id: I9414eb742b6b90459e010b038c1994537e9801a5
Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
---
A src/mainboard/aoostar/Kconfig
A src/mainboard/aoostar/Kconfig.name
A src/mainboard/aoostar/wtr_r1/Kconfig
A src/mainboard/aoostar/wtr_r1/Kconfig.name
A src/mainboard/aoostar/wtr_r1/Makefile.mk
A src/mainboard/aoostar/wtr_r1/board_info.txt
A src/mainboard/aoostar/wtr_r1/bootblock.c
A src/mainboard/aoostar/wtr_r1/data.vbt
A src/mainboard/aoostar/wtr_r1/devicetree.cb
A src/mainboard/aoostar/wtr_r1/dsdt.asl
A src/mainboard/aoostar/wtr_r1/gpio.h
A src/mainboard/aoostar/wtr_r1/romstage_fsp_params.c
12 files changed, 970 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/10/82010/1
diff --git a/src/mainboard/aoostar/Kconfig b/src/mainboard/aoostar/Kconfig
new file mode 100644
index 0000000..170ea88
--- /dev/null
+++ b/src/mainboard/aoostar/Kconfig
@@ -0,0 +1,18 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+if VENDOR_AOOSTAR
+
+choice
+ prompt "Mainboard model"
+
+source "src/mainboard/aoostar/*/Kconfig.name"
+
+endchoice
+
+source "src/mainboard/aoostar/*/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "AOOSTAR"
+
+endif # VENDOR_AOOSTAR
diff --git a/src/mainboard/aoostar/Kconfig.name b/src/mainboard/aoostar/Kconfig.name
new file mode 100644
index 0000000..e763b3f
--- /dev/null
+++ b/src/mainboard/aoostar/Kconfig.name
@@ -0,0 +1,4 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+config VENDOR_AOOSTAR
+ bool "AOOSTAR"
diff --git a/src/mainboard/aoostar/wtr_r1/Kconfig b/src/mainboard/aoostar/wtr_r1/Kconfig
new file mode 100644
index 0000000..600d0a0
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/Kconfig
@@ -0,0 +1,49 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+if BOARD_AOOSTAR_WTR_R1
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select BOARD_ROMSIZE_KB_16384
+ select DRIVERS_I2C_GENERIC
+ select DRIVERS_INTEL_DPTF
+ select DRIVERS_SPI_ACPI
+ select DRIVERS_USB_ACPI
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select INTEL_GMA_HAVE_VBT
+ select SOC_INTEL_COMMON_BLOCK_IPU
+ select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
+ select SUPERIO_ITE_IT8613E
+ select DRIVERS_UART_8250IO
+ select SOC_INTEL_ALDERLAKE_PCH_N
+
+config MAINBOARD_DIR
+ default "aoostar/wtr_r1"
+
+config MAINBOARD_PART_NUMBER
+ default "WTR R1"
+
+config MAINBOARD_VENDOR
+ string
+ default "AOOSTAR"
+
+config MAINBOARD_FAMILY
+ string
+ default "AOOSTAR_WTR_R1"
+
+config DIMM_SPD_SIZE
+ default 512
+
+config PCIEXP_ASPM
+ default y
+
+# Setting this makes NVMe SSD not work
+config PCIEXP_L1_SUB_STATE
+ default n
+
+# This platform has limited means to display POST codes
+config NO_POST
+ default y
+
+endif #BOARD_AOOSTAR_WTR_R1
diff --git a/src/mainboard/aoostar/wtr_r1/Kconfig.name b/src/mainboard/aoostar/wtr_r1/Kconfig.name
new file mode 100644
index 0000000..45bfdec
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/Kconfig.name
@@ -0,0 +1,4 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+config BOARD_AOOSTAR_WTR_R1
+ bool "WTR R1"
diff --git a/src/mainboard/aoostar/wtr_r1/Makefile.mk b/src/mainboard/aoostar/wtr_r1/Makefile.mk
new file mode 100644
index 0000000..72915ef
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/Makefile.mk
@@ -0,0 +1,5 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+bootblock-y += bootblock.c
+
+romstage-y += romstage_fsp_params.c
diff --git a/src/mainboard/aoostar/wtr_r1/board_info.txt b/src/mainboard/aoostar/wtr_r1/board_info.txt
new file mode 100644
index 0000000..363cd53
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/board_info.txt
@@ -0,0 +1,8 @@
+Vendor name: AOOSTAR
+Board name: WTR R1
+Board URL: https://aoostar.com/products/aoostar-r1-2bay-nas-intel-n100-mini-pc-with-w11-pro-lpddr4-16gb-ram-512gb-ssd
+Category: mini
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
+Release year: 2023
diff --git a/src/mainboard/aoostar/wtr_r1/bootblock.c b/src/mainboard/aoostar/wtr_r1/bootblock.c
new file mode 100644
index 0000000..9ff5e65
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/bootblock.c
@@ -0,0 +1,27 @@
+
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootblock_common.h>
+#include <superio/ite/common/ite.h>
+#include <superio/ite/it8613e/it8613e.h>
+
+#define GPIO_DEV PNP_DEV(0x2e, IT8613E_GPIO)
+
+void bootblock_mainboard_early_init(void)
+{
+ /* Set up GPIOs on Super I/O. */
+ ite_reg_write(GPIO_DEV, 0x25, 0x01); // Enable Pin GP10
+ ite_reg_write(GPIO_DEV, 0x27, 0x02); // Enable Pin GP31
+ ite_reg_write(GPIO_DEV, 0x28, 0x01); // Enable Pin GP40
+ ite_reg_write(GPIO_DEV, 0x29, 0x01); // Enable Pin GP50
+ ite_reg_write(GPIO_DEV, 0x2c, 0x41); // Internal Voltage Divider for ACC3
+ ite_reg_write(GPIO_DEV, 0xbc, 0xc0); // GP56, GP57 Internal pullup
+ ite_reg_write(GPIO_DEV, 0xbd, 0x03); // GP60, GP61 Internal pullup
+ ite_reg_write(GPIO_DEV, 0xc3, 0x41); // GP40, GP46 Simple I/O function
+ ite_set_3vsbsw(GPIO_DEV, true);
+ ite_delay_pwrgd3(GPIO_DEV);
+}
+
+void bootblock_mainboard_init(void)
+{
+}
diff --git a/src/mainboard/aoostar/wtr_r1/data.vbt b/src/mainboard/aoostar/wtr_r1/data.vbt
new file mode 100644
index 0000000..f25d9d9
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/data.vbt
Binary files differ
diff --git a/src/mainboard/aoostar/wtr_r1/devicetree.cb b/src/mainboard/aoostar/wtr_r1/devicetree.cb
new file mode 100644
index 0000000..794917b
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/devicetree.cb
@@ -0,0 +1,242 @@
+chip soc/intel/alderlake
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "pmc_gpe0_dw0" = "GPP_B"
+ register "pmc_gpe0_dw1" = "GPP_D"
+ register "pmc_gpe0_dw2" = "GPP_E"
+
+ # FSP configuration
+
+ # Sagv Configuration
+ register "sagv" = "SaGv_Enabled"
+
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC3)" # Type-C Port1
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC3)" # Type-C Port2
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC3)" # FPS connector
+ register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC3)" # USB3/2 Type A port1
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC1)" # USB3/2 Type A port2
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC1)" # USB3/2 Type A port3
+ register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Type A/ M.2 WLAN
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port1
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port2
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port3
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN
+
+ # TCSS USB3
+ register "tcss_aux_ori" = "4"
+ register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_E20, .pad_auxn_dc = GPP_E21}"
+
+ register "s0ix_enable" = "1"
+
+ # Intel Common SoC Config
+ register "common_soc_config" = "{
+ .i2c[0] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[1] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[2] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[3] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[5] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ }"
+
+ # Configure external V1P05/Vnn/VnnSx Rails
+ register "ext_fivr_settings" = "{
+ .configure_ext_fivr = 1,
+ .v1p05_enable_bitmap = FIVR_ENABLE_ALL_SX & ~FIVR_ENABLE_S0,
+ .vnn_enable_bitmap = FIVR_ENABLE_ALL_SX,
+ .vnn_sx_enable_bitmap = FIVR_ENABLE_ALL_SX,
+ .v1p05_supported_voltage_bitmap = FIVR_VOLTAGE_NORMAL,
+ .vnn_supported_voltage_bitmap = FIVR_VOLTAGE_MIN_ACTIVE,
+ .v1p05_voltage_mv = 1050,
+ .vnn_voltage_mv = 780,
+ .vnn_sx_voltage_mv = 1050,
+ .v1p05_icc_max_ma = 500,
+ .vnn_icc_max_ma = 500,
+ }"
+
+ device domain 0 on
+ device ref igpu on
+ register "ddi_portA_config" = "1"
+ register "ddi_portB_config" = "1"
+ register "ddi_ports_config" = "{
+ [DDI_PORT_A] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
+ [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
+ }"
+ end
+ device ref dtt on end
+ device ref ipu off end
+ device ref crashlog off end
+ device ref tcss_xhci on end
+ device ref xhci on
+ chip drivers/usb/acpi
+ register "desc" = ""Root Hub""
+ register "type" = "UPC_TYPE_HUB"
+ device ref xhci_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""Bluetooth""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device ref usb2_port10 on end
+ end
+ end
+ end
+ end
+ device ref cnvi_wifi on
+ register "cnvi_bt_core" = "true"
+ register "cnvi_bt_audio_offload" = "true"
+ chip drivers/wifi/generic
+ register "wake" = "GPE0_PME_B0"
+ device generic 0 on end
+ end
+ end
+ device ref i2c0 on
+ register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci"
+ end
+ device ref i2c1 on
+ register "serial_io_i2c_mode[PchSerialIoIndexI2C1]" = "PchSerialIoPci"
+ end
+ device ref i2c2 on
+ register "serial_io_i2c_mode[PchSerialIoIndexI2C2]" = "PchSerialIoPci"
+ end
+ device ref i2c3 on
+ register "serial_io_i2c_mode[PchSerialIoIndexI2C3]" = "PchSerialIoPci"
+ end
+ device ref heci1 on end
+ device ref sata on
+ register "sata_salp_support" = "1"
+ register "sata_ports_enable" = "{
+ [0] = 1,
+ [1] = 1,
+ }"
+ register "sata_ports_dev_slp" = "{
+ [0] = 1,
+ [1] = 1,
+ }"
+ end
+ device ref i2c5 on
+ register "serial_io_i2c_mode[PchSerialIoIndexI2C5]" = "PchSerialIoPci"
+ end
+ device ref pcie_rp3 on
+ register "pch_pcie_rp[PCH_RP(3)]" = "{
+ .clk_src = 2,
+ .clk_req = 2,
+ .flags = PCIE_RP_CLK_REQ_DETECT,
+ }"
+ end
+ device ref pcie_rp7 on
+ register "pch_pcie_rp[PCH_RP(7)]" = "{
+ .clk_src = 3,
+ .clk_req = 3,
+ .flags = PCIE_RP_CLK_REQ_DETECT,
+ }"
+ end
+ device ref pcie_rp9 on
+ register "pch_pcie_rp[PCH_RP(9)]" = "{
+ .clk_src = 0,
+ .clk_req = 0,
+ .flags = PCIE_RP_CLK_REQ_DETECT,
+ }"
+ end
+ device ref pcie_rp10 on
+ register "pch_pcie_rp[PCH_RP(10)]" = "{
+ .clk_src = 1,
+ .clk_req = 1,
+ .flags = PCIE_RP_CLK_REQ_DETECT,
+ }"
+ end
+ device ref pch_espi on
+ # Needed for ITE SuperIO
+ register "gen1_dec" = "0x00fc0201"
+ register "gen2_dec" = "0x007c0a01"
+ register "gen3_dec" = "0x000c03e1"
+ register "gen4_dec" = "0x001c02e1"
+ chip superio/ite/it8613e
+ register "TMPIN1.mode" = "THERMAL_RESISTOR"
+ register "ec.vin_mask" = "VIN_ALL"
+ # CPU_FAN1
+ register "FAN2.mode" = "FAN_SMART_AUTOMATIC"
+ register "FAN2.smart.tmpin" = " 1"
+ register "FAN2.smart.tmp_off" = "30"
+ register "FAN2.smart.tmp_start" = "35"
+ register "FAN2.smart.tmp_full" = "96"
+ register "FAN2.smart.tmp_delta" = " 2"
+ register "FAN2.smart.pwm_start" = "40"
+ register "FAN2.smart.slope" = " 1"
+ # SYSFANCN1
+ register "FAN3.mode" = "FAN_SMART_SOFTWARE"
+ register "FAN3.smart.pwm_start" = "80"
+ # SYS_FAN1
+ register "FAN4.mode" = "FAN_SMART_SOFTWARE"
+ register "FAN4.smart.pwm_start" = "127"
+
+ device pnp 2e.0 off end # Floppy
+ device pnp 2e.1 off end # COM 1
+ device pnp 2e.4 on # Environment Controller
+ io 0x60 = 0xa30
+ io 0x62 = 0xa20
+ irq 0x70 = 0x00
+ end
+ device pnp 2e.5 off end # Keyboard
+ device pnp 2e.6 off end # Mouse
+ device pnp 2e.7 on # GPIO
+ io 0x60 = 0x000
+ io 0x62 = 0xa00
+ irq 0x70 = 0x00
+ irq 0x71 = 0x01
+ end
+ device pnp 2e.a off end # CIR
+ end
+ end
+ device ref uart0 on
+ register "serial_io_uart_mode" = "{
+ [PchSerialIoIndexUART0] = PchSerialIoSkipInit,
+ [PchSerialIoIndexUART1] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART2] = PchSerialIoDisabled,
+ }"
+ end
+ device ref gspi0 on
+ register "serial_io_gspi_mode" = "{
+ [PchSerialIoIndexGSPI0] = PchSerialIoPci,
+ [PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI3] = PchSerialIoDisabled,
+ }"
+ register "serial_io_gspi_cs_mode" = "{
+ [PchSerialIoIndexGSPI0] = 0,
+ [PchSerialIoIndexGSPI1] = 0,
+ [PchSerialIoIndexGSPI2] = 0,
+ [PchSerialIoIndexGSPI3] = 0,
+ }"
+ register "serial_io_gspi_cs_state" = "{
+ [PchSerialIoIndexGSPI0] = 0,
+ [PchSerialIoIndexGSPI1] = 0,
+ [PchSerialIoIndexGSPI2] = 0,
+ [PchSerialIoIndexGSPI3] = 0,
+ }"
+ end
+ device ref p2sb on end
+ device ref emmc off end
+ device ref ish on end
+ device ref ufs off end
+ device ref hda on
+ register "pch_hda_dsp_enable" = "1"
+ register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
+ register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
+ register "pch_hda_idisp_codec_enable" = "1"
+ end
+ device ref smbus on end
+ end
+end
diff --git a/src/mainboard/aoostar/wtr_r1/dsdt.asl b/src/mainboard/aoostar/wtr_r1/dsdt.asl
new file mode 100644
index 0000000..58c147e
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/dsdt.asl
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+#include <gpio.h>
+
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ ACPI_DSDT_REV_2,
+ OEM_ID,
+ ACPI_TABLE_CREATOR,
+ 0x20110725
+)
+{
+ #include <acpi/dsdt_top.asl>
+ #include <soc/intel/common/block/acpi/acpi/platform.asl>
+ #include <soc/intel/common/block/acpi/acpi/globalnvs.asl>
+ #include <cpu/intel/common/acpi/cpu.asl>
+
+ Device (\_SB.PCI0) {
+ #include <soc/intel/common/block/acpi/acpi/northbridge.asl>
+ #include <soc/intel/alderlake/acpi/southbridge.asl>
+ #include <soc/intel/alderlake/acpi/tcss.asl>
+ }
+
+ #include <southbridge/intel/common/acpi/sleepstates.asl>
+}
diff --git a/src/mainboard/aoostar/wtr_r1/gpio.h b/src/mainboard/aoostar/wtr_r1/gpio.h
new file mode 100644
index 0000000..0c052d2
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/gpio.h
@@ -0,0 +1,541 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef CFG_GPIO_H
+#define CFG_GPIO_H
+
+#include <gpio.h>
+
+/* Pad configuration was generated automatically using intelp2m utility */
+static const struct pad_config gpio_table[] = {
+
+ /* ------- GPIO Community 0 ------- */
+
+ /* ------- GPIO Group GPP_B ------- */
+ _PAD_CFG_STRUCT(GPP_B0, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) |
+ PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* CORE_VID0 */
+ _PAD_CFG_STRUCT(GPP_B1, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) |
+ PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* CORE_VID1 */
+ _PAD_CFG_STRUCT(GPP_B2, PAD_FUNC(NF1) | PAD_RESET(PLTRST) | PAD_TRIG(OFF) |
+ PAD_BUF(TX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* VRALERT# */
+ PAD_NC(GPP_B3, NONE), /* GPIO */
+ PAD_NC(GPP_B4, NONE), /* GPIO */
+ PAD_NC(GPP_B5, NONE), /* GPIO */
+ PAD_NC(GPP_B6, NONE), /* GPIO */
+ PAD_NC(GPP_B7, NONE), /* GPIO */
+ PAD_NC(GPP_B8, NONE), /* GPIO */
+ PAD_NC(GPP_B9, NONE), /* GPIO */
+ PAD_NC(GPP_B10, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_B11, PAD_FUNC(NF1) | PAD_RESET(RSMRST) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* PMCALERT# */
+ _PAD_CFG_STRUCT(GPP_B12, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* SLP_S0# */
+ _PAD_CFG_STRUCT(GPP_B13, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* PLTRST# */
+ _PAD_CFG_STRUCT(GPP_B14, PAD_FUNC(NF1) | PAD_RESET(PLTRST) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SPKR */
+ PAD_NC(GPP_B15, NONE), /* GPIO */
+ PAD_NC(GPP_B16, NONE), /* GPIO */
+ PAD_NC(GPP_B17, NONE), /* GPIO */
+ PAD_CFG_GPO(GPP_B18, 0, DEEP), /* GPIO */
+ PAD_NC(GPP_B19, NONE), /* GPIO */
+ PAD_NC(GPP_B20, NONE), /* GPIO */
+ PAD_NC(GPP_B21, NONE), /* GPIO */
+ PAD_NC(GPP_B22, NONE), /* GPIO */
+ PAD_CFG_GPO(GPP_B23, 0, DEEP), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_B24, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* GSPI0_CLK_LOOPBK */
+ _PAD_CFG_STRUCT(GPP_B25, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* GSPI1_CLK_LOOPBK */
+
+ /* ------- GPIO Group GPP_T ------- */
+ PAD_NC(GPP_T0, NONE), /* GPIO */
+ PAD_NC(GPP_T1, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_T2, PAD_FUNC(NF2) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(DN_20K)), /* FUSA_DIAGTEST_EN */
+ _PAD_CFG_STRUCT(GPP_T3, PAD_FUNC(NF2) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(DN_20K)), /* FUSA_DIAGTEST_MODE */
+ PAD_NC(GPP_T4, NONE), /* GPIO */
+ PAD_NC(GPP_T5, NONE), /* GPIO */
+ PAD_NC(GPP_T6, NONE), /* GPIO */
+ PAD_NC(GPP_T7, NONE), /* GPIO */
+ PAD_NC(GPP_T8, NONE), /* GPIO */
+ PAD_NC(GPP_T9, NONE), /* GPIO */
+ PAD_NC(GPP_T10, NONE), /* GPIO */
+ PAD_NC(GPP_T11, NONE), /* GPIO */
+ PAD_NC(GPP_T12, NONE), /* GPIO */
+ PAD_NC(GPP_T13, NONE), /* GPIO */
+ PAD_NC(GPP_T14, NONE), /* GPIO */
+ PAD_NC(GPP_T15, NONE), /* GPIO */
+
+ /* ------- GPIO Group GPP_A ------- */
+ _PAD_CFG_STRUCT(GPP_A0, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* ESPI_IO0 */
+ _PAD_CFG_STRUCT(GPP_A1, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* ESPI_IO1 */
+ _PAD_CFG_STRUCT(GPP_A2, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* ESPI_IO2 */
+ _PAD_CFG_STRUCT(GPP_A3, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* ESPI_IO3 */
+ _PAD_CFG_STRUCT(GPP_A4, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* ESPI_CS0# */
+ _PAD_CFG_STRUCT(GPP_A5, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* ESPI_ALERT0# */
+ _PAD_CFG_STRUCT(GPP_A6, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* ESPI_ALERT1# */
+ PAD_NC(GPP_A7, NONE), /* GPIO */
+ PAD_NC(GPP_A8, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_A9, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* ESPI_CLK */
+ _PAD_CFG_STRUCT(GPP_A10, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* ESPI_RESET# */
+ PAD_NC(GPP_A11, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_A12, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(UP_20K)), /* SATAXPCIE1 */
+ PAD_CFG_GPO(GPP_A13, 1, PLTRST), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_A14, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* USB_OC1# */
+ _PAD_CFG_STRUCT(GPP_A15, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* USB_OC2# */
+ _PAD_CFG_STRUCT(GPP_A16, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* USB_OC3# */
+ PAD_NC(GPP_A17, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_A18, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(TxDRxE)), /* DDSP_HPDB */
+ _PAD_CFG_STRUCT(GPP_A19, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* DDSP_HPD1 */
+ PAD_NC(GPP_A20, NONE), /* GPIO */
+ PAD_CFG_GPO(GPP_A21, 1, PLTRST), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_A22, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* DDPC_CTRLDATA */
+ _PAD_CFG_STRUCT(GPP_A23, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(UP_20K)), /* ESPI_CS1# */
+ _PAD_CFG_STRUCT(GPP_ESPI_CLK_LOOPBK, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* GPP_ESPI_CLK_LOOPBK */
+
+ /* ------- GPIO Community 1 ------- */
+
+ /* ------- GPIO Group GPP_S ------- */
+ PAD_NC(GPP_S0, NONE), /* GPIO */
+ PAD_NC(GPP_S1, NONE), /* GPIO */
+ PAD_NC(GPP_S2, NONE), /* GPIO */
+ PAD_NC(GPP_S3, NONE), /* GPIO */
+ PAD_NC(GPP_S4, NONE), /* GPIO */
+ PAD_NC(GPP_S5, NONE), /* GPIO */
+ PAD_NC(GPP_S6, NONE), /* GPIO */
+ PAD_NC(GPP_S7, NONE), /* GPIO */
+
+ /* ------- GPIO Group GPP_I ------- */
+ PAD_NC(GPP_I0, NONE), /* GPIO */
+ PAD_NC(GPP_I1, NONE), /* GPIO */
+ PAD_NC(GPP_I2, NONE), /* GPIO */
+ PAD_NC(GPP_I3, NONE), /* GPIO */
+ PAD_NC(GPP_I4, NONE), /* GPIO */
+ PAD_NC(GPP_I5, NONE), /* GPIO */
+ PAD_NC(GPP_I6, NONE), /* GPIO */
+ PAD_NC(GPP_I7, NONE), /* GPIO */
+ PAD_NC(GPP_I8, NONE), /* GPIO */
+ PAD_NC(GPP_I9, NONE), /* GPIO */
+ PAD_NC(GPP_I10, NONE), /* GPIO */
+ PAD_NC(GPP_I11, NONE), /* GPIO */
+ PAD_NC(GPP_I12, NONE), /* GPIO */
+ PAD_NC(GPP_I13, NONE), /* GPIO */
+ PAD_NC(GPP_I14, NONE), /* GPIO */
+ PAD_NC(GPP_I15, NONE), /* GPIO */
+ PAD_NC(GPP_I16, NONE), /* GPIO */
+ PAD_NC(GPP_I17, NONE), /* GPIO */
+ PAD_NC(GPP_I18, NONE), /* GPIO */
+ PAD_NC(GPP_I19, NONE), /* GPIO */
+
+ /* ------- GPIO Group GPP_H ------- */
+ PAD_CFG_GPO(GPP_H0, 0, DEEP), /* GPIO */
+ PAD_CFG_GPO(GPP_H1, 0, DEEP), /* GPIO */
+ PAD_CFG_GPO(GPP_H2, 0, DEEP), /* GPIO */
+ PAD_CFG_GPO(GPP_H3, 1, PLTRST), /* GPIO */
+ PAD_NC(GPP_H4, NONE), /* GPIO */
+ PAD_NC(GPP_H5, NONE), /* GPIO */
+ PAD_NC(GPP_H6, NONE), /* GPIO */
+ PAD_NC(GPP_H7, NONE), /* GPIO */
+ PAD_NC(GPP_H8, NONE), /* GPIO */
+ PAD_NC(GPP_H9, NONE), /* GPIO */
+ PAD_NC(GPP_H10, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_H11, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* n/a */
+ PAD_NC(GPP_H12, NONE), /* GPIO */
+ PAD_NC(GPP_H13, NONE), /* GPIO */
+ PAD_NC(GPP_H14, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_H15, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* DDPB_CTRLCLK */
+ PAD_NC(GPP_H16, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_H17, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* DDPB_CTRLDATA */
+ _PAD_CFG_STRUCT(GPP_H18, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* PROC_C10_GATE# */
+ _PAD_CFG_STRUCT(GPP_H19, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* SRCCLKREQ4# */
+ PAD_NC(GPP_H20, NONE), /* GPIO */
+ PAD_NC(GPP_H21, NONE), /* GPIO */
+ PAD_NC(GPP_H22, NONE), /* GPIO */
+ PAD_NC(GPP_H23, NONE), /* GPIO */
+
+ /* ------- GPIO Group GPP_D ------- */
+ PAD_NC(GPP_D0, NONE), /* GPIO */
+ PAD_NC(GPP_D1, NONE), /* GPIO */
+ PAD_NC(GPP_D2, NONE), /* GPIO */
+ PAD_NC(GPP_D3, NONE), /* GPIO */
+ PAD_NC(GPP_D4, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_D5, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SRCCLKREQ0# */
+ _PAD_CFG_STRUCT(GPP_D6, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SRCCLKREQ1# */
+ _PAD_CFG_STRUCT(GPP_D7, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SRCCLKREQ2# */
+ _PAD_CFG_STRUCT(GPP_D8, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SRCCLKREQ3# */
+ _PAD_CFG_STRUCT(GPP_D9, PAD_FUNC(NF5) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(NATIVE)), /* BSSB_LS2_RX */
+ _PAD_CFG_STRUCT(GPP_D10, PAD_FUNC(NF5) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE), PAD_PULL(NATIVE)), /* BSSB_LS2_TX */
+ _PAD_CFG_STRUCT(GPP_D11, PAD_FUNC(NF5) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(NATIVE)), /* BSSB_LS3_RX */
+ _PAD_CFG_STRUCT(GPP_D12, PAD_FUNC(NF5) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE), PAD_PULL(NATIVE)), /* BSSB_LS3_TX */
+ PAD_NC(GPP_D13, NONE), /* GPIO */
+ PAD_CFG_GPO(GPP_D14, 1, PLTRST), /* GPIO */
+ PAD_NC(GPP_D15, NONE), /* GPIO */
+ PAD_NC(GPP_D16, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_D17, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* UART1_RXD */
+ _PAD_CFG_STRUCT(GPP_D18, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* UART1_TXD */
+ PAD_NC(GPP_D19, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_GSPI2_CLK_LOOPBK, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* GPP_GSPI2_CLK_LOOPBK */
+
+ /* ------- GPIO Group vGPIO ------- */
+ PAD_CFG_GPO(GPP_VGPIO_0, 0, DEEP), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_VGPIO_4, PAD_FUNC(GPIO) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_DISABLE) | (1 << 1), 0), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_VGPIO_5, PAD_FUNC(GPIO) | PAD_RESET(DEEP) | (1 << 1) | 1, 0), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_VGPIO_6, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_6 */
+ PAD_CFG_NF(GPP_VGPIO_7, NONE, DEEP, NF1), /* GPP_VGPIO_7 */
+ PAD_CFG_NF(GPP_VGPIO_8, NONE, DEEP, NF1), /* GPP_VGPIO_8 */
+ _PAD_CFG_STRUCT(GPP_VGPIO_9, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_9 */
+ _PAD_CFG_STRUCT(GPP_VGPIO_10, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_10 */
+ PAD_CFG_NF(GPP_VGPIO_11, NONE, DEEP, NF1), /* GPP_VGPIO_11 */
+ PAD_CFG_NF(GPP_VGPIO_12, NONE, DEEP, NF1), /* GPP_VGPIO_12 */
+ _PAD_CFG_STRUCT(GPP_VGPIO_13, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_13 */
+ _PAD_CFG_STRUCT(GPP_VGPIO_18, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_18 */
+ PAD_CFG_NF(GPP_VGPIO_19, NONE, DEEP, NF1), /* GPP_VGPIO_19 */
+ PAD_CFG_NF(GPP_VGPIO_20, NONE, DEEP, NF1), /* GPP_VGPIO_20 */
+ _PAD_CFG_STRUCT(GPP_VGPIO_21, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_21 */
+ _PAD_CFG_STRUCT(GPP_VGPIO_22, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_22 */
+ PAD_CFG_NF(GPP_VGPIO_23, NONE, DEEP, NF1), /* GPP_VGPIO_23 */
+ PAD_CFG_NF(GPP_VGPIO_24, NONE, DEEP, NF1), /* GPP_VGPIO_24 */
+ _PAD_CFG_STRUCT(GPP_VGPIO_25, PAD_FUNC(NF1) | PAD_RESET(DEEP) | (1 << 1), 0), /* GPP_VGPIO_25 */
+ PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF1), /* GPP_VGPIO_30 */
+ PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF1), /* GPP_VGPIO_31 */
+ PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF1), /* GPP_VGPIO_32 */
+ PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF1), /* GPP_VGPIO_33 */
+ PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1), /* GPP_VGPIO_34 */
+ PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1), /* GPP_VGPIO_35 */
+ PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1), /* GPP_VGPIO_36 */
+ PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1), /* GPP_VGPIO_37 */
+
+ /* ------- GPIO Community 2 ------- */
+
+ /* ------- GPIO Group GPP_GPD ------- */
+ _PAD_CFG_STRUCT(GPD0, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* BATLOW# */
+ _PAD_CFG_STRUCT(GPD1, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* ACPRESENT */
+ PAD_CFG_GPO(GPD2, 1, PLTRST), /* GPIO */
+ _PAD_CFG_STRUCT(GPD3, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* PWRBTN# */
+ _PAD_CFG_STRUCT(GPD4, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SLP_S3# */
+ _PAD_CFG_STRUCT(GPD5, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SLP_S4# */
+ _PAD_CFG_STRUCT(GPD6, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE), 0), /* SLP_A# */
+ PAD_CFG_GPO(GPD7, 0, PWROK), /* GPIO */
+ _PAD_CFG_STRUCT(GPD8, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* SUSCLK */
+ _PAD_CFG_STRUCT(GPD9, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE), 0), /* SLP_WLAN# */
+ _PAD_CFG_STRUCT(GPD10, PAD_FUNC(NF1) | PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE), 0), /* SLP_S5# */
+ PAD_CFG_GPO(GPD11, 0, PWROK), /* GPIO */
+ _PAD_CFG_STRUCT(GPD_INPUT3VSEL, PAD_FUNC(NF1) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* GPD_INPUT3VSEL */
+ _PAD_CFG_STRUCT(GPD_SLP_LANB, PAD_FUNC(NF1) | PAD_BUF(TX_RX_DISABLE), 0), /* GPD_SLP_LANB */
+ _PAD_CFG_STRUCT(GPD_SLP_SUSB, PAD_FUNC(NF1) | PAD_BUF(TX_RX_DISABLE), 0), /* GPD_SLP_SUSB */
+ _PAD_CFG_STRUCT(GPD_WAKEB, PAD_FUNC(NF1) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* GPD_WAKEB */
+ _PAD_CFG_STRUCT(GPD_DRAM_RESETB, PAD_FUNC(NF1) | PAD_BUF(TX_RX_DISABLE), 0), /* GPD_DRAM_RESETB */
+
+ /* ------- GPIO Group PCIe vGPIO ------- */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* GPIO */
+
+ /* ------- GPIO Community 4 ------- */
+
+ /* ------- GPIO Group GPP_C ------- */
+ _PAD_CFG_STRUCT(GPP_C0, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* SMBCLK */
+ _PAD_CFG_STRUCT(GPP_C1, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* SMBDATA */
+ _PAD_CFG_STRUCT(GPP_C2, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* SMBALERT# */
+ _PAD_CFG_STRUCT(GPP_C3, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* SML0CLK */
+ _PAD_CFG_STRUCT(GPP_C4, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* SML0DATA */
+ PAD_CFG_TERM_GPO(GPP_C5, 1, DN_20K, PLTRST), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_C6, PAD_FUNC(NF1) | PAD_RESET(RSMRST) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* SML1CLK */
+ _PAD_CFG_STRUCT(GPP_C7, PAD_FUNC(NF1) | PAD_RESET(RSMRST) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* SML1DATA */
+ PAD_NC(GPP_C8, NONE), /* GPIO */
+ PAD_NC(GPP_C9, NONE), /* GPIO */
+ PAD_NC(GPP_C10, NONE), /* GPIO */
+ PAD_NC(GPP_C11, NONE), /* GPIO */
+ PAD_NC(GPP_C12, NONE), /* GPIO */
+ PAD_NC(GPP_C13, NONE), /* GPIO */
+ PAD_NC(GPP_C14, NONE), /* GPIO */
+ PAD_NC(GPP_C15, NONE), /* GPIO */
+ PAD_NC(GPP_C16, NONE), /* GPIO */
+ PAD_NC(GPP_C17, NONE), /* GPIO */
+ PAD_NC(GPP_C18, NONE), /* GPIO */
+ PAD_NC(GPP_C19, NONE), /* GPIO */
+ PAD_NC(GPP_C20, NONE), /* GPIO */
+ PAD_NC(GPP_C21, NONE), /* GPIO */
+ PAD_NC(GPP_C22, NONE), /* GPIO */
+ PAD_NC(GPP_C23, NONE), /* GPIO */
+
+ /* ------- GPIO Group GPP_F ------- */
+ _PAD_CFG_STRUCT(GPP_F0, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* CNV_BRI_DT */
+ _PAD_CFG_STRUCT(GPP_F1, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* CNV_BRI_RSP */
+ _PAD_CFG_STRUCT(GPP_F2, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* CNV_RGI_DT */
+ _PAD_CFG_STRUCT(GPP_F3, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* CNV_RGI_RSP */
+ _PAD_CFG_STRUCT(GPP_F4, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* CNV_RF_RESET# */
+ _PAD_CFG_STRUCT(GPP_F5, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* n/a */
+ _PAD_CFG_STRUCT(GPP_F6, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* CNV_PA_BLANKING */
+ PAD_CFG_GPO(GPP_F7, 0, DEEP), /* GPIO */
+ PAD_NC(GPP_F8, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_F9, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* BOOTMPC */
+ PAD_CFG_GPO(GPP_F10, 0, DEEP), /* GPIO */
+ PAD_NC(GPP_F11, NONE), /* GPIO */
+ PAD_NC(GPP_F12, NONE), /* GPIO */
+ PAD_NC(GPP_F13, NONE), /* GPIO */
+ PAD_NC(GPP_F14, NONE), /* GPIO */
+ PAD_NC(GPP_F15, NONE), /* GPIO */
+ PAD_NC(GPP_F16, NONE), /* GPIO */
+ PAD_NC(GPP_F17, NONE), /* GPIO */
+ PAD_NC(GPP_F18, NONE), /* GPIO */
+ PAD_NC(GPP_F19, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_F20, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* Reserved */
+ _PAD_CFG_STRUCT(GPP_F21, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* Reserved */
+ PAD_NC(GPP_F22, NONE), /* GPIO */
+ PAD_NC(GPP_F23, NONE), /* GPIO */
+ PAD_NC(GPP_F_CLK_LOOPBK, NONE), /* GPIO */
+
+ /* ------- GPIO Group GPP_HVCMOS ------- */
+ _PAD_CFG_STRUCT(GPP_L_BKLTEN, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* n/a */
+ _PAD_CFG_STRUCT(GPP_L_BKLTCTL, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* n/a */
+ _PAD_CFG_STRUCT(GPP_L_VDDEN, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* n/a */
+ _PAD_CFG_STRUCT(GPP_SYS_PWROK, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* n/a */
+ _PAD_CFG_STRUCT(GPP_SYS_RESETB, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* n/a */
+ _PAD_CFG_STRUCT(GPP_MLK_RSTB, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_BUF(TX_RX_DISABLE), 0), /* n/a */
+
+ /* ------- GPIO Group GPP_E ------- */
+ _PAD_CFG_STRUCT(GPP_E0, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(UP_20K)), /* SATAXPCIE0 */
+ PAD_NC(GPP_E1, NONE), /* GPIO */
+ PAD_NC(GPP_E2, NONE), /* GPIO */
+ PAD_NC(GPP_E3, NONE), /* GPIO */
+ PAD_NC(GPP_E4, NONE), /* GPIO */
+ PAD_NC(GPP_E5, NONE), /* GPIO */
+ PAD_CFG_TERM_GPO(GPP_E6, 1, DN_20K, PLTRST), /* GPIO */
+ PAD_NC(GPP_E7, NONE), /* GPIO */
+ PAD_CFG_GPO(GPP_E8, 0, PLTRST), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_E9, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), 0), /* USB_OC0# */
+ PAD_NC(GPP_E10, NONE), /* GPIO */
+ PAD_NC(GPP_E11, NONE), /* GPIO */
+ PAD_NC(GPP_E12, NONE), /* GPIO */
+ PAD_NC(GPP_E13, NONE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_E14, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE) | (1 << 1), PAD_IOSSTATE(TxDRxE)), /* DDSP_HPDA */
+ _PAD_CFG_STRUCT(GPP_E15, PAD_FUNC(NF2) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), 0), /* Reserved */
+ PAD_CFG_GPO(GPP_E16, 0, PLTRST), /* GPIO */
+ PAD_NC(GPP_E17, NONE), /* GPIO */
+ PAD_NC(GPP_E18, NATIVE), /* GPIO */
+ PAD_NC(GPP_E19, NATIVE), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_E20, PAD_FUNC(NF5) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(NATIVE)), /* BSSB_LS1_RX */
+ _PAD_CFG_STRUCT(GPP_E21, PAD_FUNC(NF5) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE), PAD_PULL(NATIVE)), /* BSSB_LS1_TX */
+ _PAD_CFG_STRUCT(GPP_E22, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_PULL(DN_20K) | PAD_IOSSTATE(IGNORE)), /* DDPA_CTRLCLK */
+ _PAD_CFG_STRUCT(GPP_E23, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | (1 << 1), PAD_IOSSTATE(IGNORE)), /* DDPA_CTRLDATA */
+ PAD_NC(GPP_E_CLK_LOOPBK, NONE), /* GPIO */
+
+ /* ------- GPIO Community 5 ------- */
+
+ /* ------- GPIO Group GPP_R ------- */
+ _PAD_CFG_STRUCT(GPP_R0, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* HDA_BCLK */
+ _PAD_CFG_STRUCT(GPP_R1, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* HDA_SYNC */
+ _PAD_CFG_STRUCT(GPP_R2, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* HDA_SDO */
+ _PAD_CFG_STRUCT(GPP_R3, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* HDA_SDI0 */
+ _PAD_CFG_STRUCT(GPP_R4, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), PAD_IOSSTATE(IGNORE)), /* HDA_RST# */
+ PAD_NC(GPP_R5, NONE), /* GPIO */
+ PAD_NC(GPP_R6, NONE), /* GPIO */
+ PAD_NC(GPP_R7, NONE), /* GPIO */
+};
+
+#endif /* CFG_GPIO_H */
diff --git a/src/mainboard/aoostar/wtr_r1/romstage_fsp_params.c b/src/mainboard/aoostar/wtr_r1/romstage_fsp_params.c
new file mode 100644
index 0000000..1477bc0
--- /dev/null
+++ b/src/mainboard/aoostar/wtr_r1/romstage_fsp_params.c
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <assert.h>
+#include <fsp/api.h>
+#include <soc/romstage.h>
+#include <soc/meminit.h>
+
+#include "gpio.h"
+
+static const struct mb_cfg ddr4_mem_config = {
+ .type = MEM_TYPE_DDR4,
+ /* According to DOC #573387 rcomp values no longer have to be provided */
+ /* DDR DIMM configuration does not need to set DQ/DQS maps */
+
+ .ect = true, /* Early Command Training */
+
+ .UserBd = BOARD_TYPE_MOBILE,
+
+ .LpDdrDqDqsReTraining = 1,
+
+ .ddr_config = {
+ .dq_pins_interleaved = false,
+ },
+};
+
+static const struct mem_spd dimm_module_spd_info = {
+ .topo = MEM_TOPO_DIMM_MODULE,
+ .smbus[0] = { .addr_dimm[0] = 0x50, },
+};
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+ /*
+ * Alder Lake common meminit block driver considers bus width to be 128-bit and
+ * populates the meminit data accordingly. Alder Lake-N has single memory controller
+ * with 64-bit bus width. By setting half_populated to true, only the bottom half is
+ * populated.
+ * TODO: Implement __weak variant_is_half_populated(void) function.
+ */
+ const bool half_populated = true;
+
+ memcfg_init(memupd, &ddr4_mem_config, &dimm_module_spd_info, half_populated);
+
+ gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
+}
To view, visit change 82010. To unsubscribe, or for help writing mail filters, visit settings.