Martin Roth (gaumless@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7663
-gerrit
commit a1b74e5b717c542815d990d2dfd7a092b443072d Author: Martin Roth martin.roth@se-eng.com Date: Fri Dec 5 14:55:07 2014 -0700
intel/minnowmax: Update devicetree
- Align register values. - Enable both EHCI and XHCI so the choice of port used can be made at runtime. When both are enabled in devicetree, XHCI currently gets disabled by the FSP chipset code. This can be overridden in mainboard code or by a Kconfig entry, but there's a question about whether or not that's desired. - Enable function 1c.0 so the rest of the functions will be seen, even though the function is not actually used. This is a short-term fix, as the correct solution is to determine whether or not any of the other functions are enabled, and not to hide function 0 if they are. I am working on that, but I want to get this in for now.
Change-Id: I83ae12c2393024b82a55d0b3a5ffa8782e16107e Signed-off-by: Martin Roth martin.roth@se-eng.com --- src/mainboard/intel/minnowmax/devicetree.cb | 50 ++++++++++++++--------------- 1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/src/mainboard/intel/minnowmax/devicetree.cb b/src/mainboard/intel/minnowmax/devicetree.cb index 72849d6..6e456cb 100644 --- a/src/mainboard/intel/minnowmax/devicetree.cb +++ b/src/mainboard/intel/minnowmax/devicetree.cb @@ -21,8 +21,8 @@ chip soc/intel/fsp_baytrail
#### ACPI Register Settings #### - register "fadt_pm_profile" = "PM_UNSPECIFIED" - register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" + register "fadt_pm_profile" = "PM_UNSPECIFIED" + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE"
#### FSP register settings #### register "PcdSataMode" = "SATA_MODE_AHCI" @@ -34,25 +34,25 @@ chip soc/intel/fsp_baytrail register "PcdApertureSize" = "APERTURE_SIZE_DEFAULT" register "PcdGttSize" = "GTT_SIZE_DEFAULT" register "PcdLpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" - register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" - register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" - register "IgdRenderStandby" = "IGD_RENDER_STANDBY_ENABLE" - register "EnableMemoryDown" = "MEMORY_DOWN_ENABLE" - register "DRAMSpeed" = "DRAM_SPEED_1066MHZ" - register "DRAMType" = "DRAM_TYPE_DDR3L" - register "DIMM0Enable" = "DIMM0_ENABLE" - register "DIMM1Enable" = "DIMM1_DISABLE" - register "DIMMDWidth" = "DIMM_DWIDTH_X16" - register "DIMMDensity" = "DIMM_DENSITY_2G_BIT" - register "DIMMBusWidth" = "DIMM_BUS_WIDTH_64BIT" - register "DIMMSides" = "DIMM_SIDES_1RANK" - register "DIMMtCL" = "11" - register "DIMMtRPtRCD" = "11" - register "DIMMtWR" = "12" - register "DIMMtWTR" = "6" - register "DIMMtRRD" = "6" - register "DIMMtRTP" = "6" - register "DIMMtFAW" = "20" + register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" + register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" + register "IgdRenderStandby" = "IGD_RENDER_STANDBY_ENABLE" + register "EnableMemoryDown" = "MEMORY_DOWN_ENABLE" + register "DRAMSpeed" = "DRAM_SPEED_1066MHZ" + register "DRAMType" = "DRAM_TYPE_DDR3L" + register "DIMM0Enable" = "DIMM0_ENABLE" + register "DIMM1Enable" = "DIMM1_DISABLE" + register "DIMMDWidth" = "DIMM_DWIDTH_X16" + register "DIMMDensity" = "DIMM_DENSITY_2G_BIT" # Setting for 1GB board - modified runtime for 2GB board in romstage.c to DIMM_DENSITY_4G_BIT + register "DIMMBusWidth" = "DIMM_BUS_WIDTH_64BIT" + register "DIMMSides" = "DIMM_SIDES_1RANK" + register "DIMMtCL" = "11" + register "DIMMtRPtRCD" = "11" + register "DIMMtWR" = "12" + register "DIMMtWTR" = "6" + register "DIMMtRRD" = "6" + register "DIMMtRTP" = "6" + register "DIMMtFAW" = "20"
device cpu_cluster 0 on device lapic 0 on end @@ -67,12 +67,12 @@ chip soc/intel/fsp_baytrail device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 device pci 13.0 on end # 8086 0F23 - SATA AHCI Onboard & HSEC - device pci 14.0 on end # 8086 0F35 - USB XHCI Onboard & HSEC + device pci 14.0 on end # 8086 0F35 - USB XHCI - Onboard & HSEC - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime device pci 15.0 on end # 8086 0F28 - LP Engine Audio LSEC device pci 17.0 off end # 8086 0F50 - MMC Port - device pci 18.0 on end # 8086 0F40 - SIO - DMA - device pci 18.1 off end # 8086 0F41 - I2C Port 1 (0) - - device pci 18.2 off end # 8086 0F42 - I2C Port 2 (1) - (testpoints) + device pci 18.2 on end # 8086 0F42 - I2C Port 2 (1) - (testpoints) device pci 18.3 off end # 8086 0F43 - I2C Port 3 (2) - device pci 18.4 off end # 8086 0F44 - I2C Port 4 (3) - device pci 18.5 off end # 8086 0F45 - I2C Port 5 (4) - @@ -80,11 +80,11 @@ chip soc/intel/fsp_baytrail device pci 18.7 on end # 8086 0F47 - I2C Port 7 (6) HSEC device pci 1a.0 on end # 8086 0F18 - TXE - device pci 1b.0 off end # 8086 0F04 - HD Audio - - device pci 1c.0 off end # 8086 0F48 - PCIe Port 1 (0) - + device pci 1c.0 on end # 8086 0F48 - PCIe Port 1 (0) - device pci 1c.1 off end # 8086 0F4A - PCIe Port 2 (1) - device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) Onboard GBE device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) HSEC - device pci 1d.0 off end # 8086 0F34 - USB EHCI - + device pci 1d.0 on end # 8086 0F34 - USB EHCI - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime device pci 1e.0 on end # 8086 0F06 - SIO - DMA - device pci 1e.1 on end # 8086 0F08 - PWM 1 LSEC device pci 1e.2 on end # 8086 0F09 - PWM 2 LSEC