1 comment:
File src/southbridge/intel/i82371eb/Kconfig:
config HAVE_SCMI
bool
default y if SOUTHBRIDGE_INTEL_I82371EB
help
Southbridges select Y if their DSDT implements SCMI.
See http://smbus.org/specs/smbus_cmi10.pdf for details.
config USE_SCMI
bool "Enable SMBus Control Method Interface (SCMI)"
depends on HAVE_SCMI && HAVE_ACPI_TABLES
help
Adds extra access methods conforming to the SMBus Control Method Interface (SCMI)
specification to the SMBus ACPI device. This may be your only access to SMBus
devices if other means fail.
ASUS P3B-F mainboard requires this.
If you say Y here, you will have to blacklist the native driver and instead use
i2c-scmi driver to access SMBus-connected devices.
Still not guarded. The options would show on other platforms. […]
This option is dependent on HAVE_SCMI being set, and should not show unless it is set in the southbridge (and have SCMI interfaces implemented). Seeing wider SCMI adoption elsewhere starting with CB:44507, I am preparing a separate patch to move these options to src/acpi/Kconfig. I'm going to run a few builds to make sure before submitting.
To view, visit change 41735. To unsubscribe, or for help writing mail filters, visit settings.