Need help here. How can i enable conf-mode (pnp_enter_conf_mode_8787) before devicetree.cb gets applied?

Patch set 4:Code-Review -1

View Change

3 comments:

• File src/mainboard/medion/ms_7707/devicetree.cb:

  • Patch Set #4, Line 69: register "gpio2_output_enable" = "0x20" # 0xF1

    This doesn't work. Any ideas how to set GPIOs?

  • Patch Set #4, Line 76: register "led_vsb_mode_select" = "0x09" # 0xF9

    This works but using "register" here is way too complicated. I would rather use 'irq 0xf9 = 0x09' below. But it doesn't work because the whole devicetree.cb stuff lacks 'pnp_enter_conf_mode_8787' to get the SuperIO into conf-mode.
    Any ideas how to solve this?

  • Patch Set #4, Line 80: io 0x60 = 0x295

    HWM doesn't work. Superiotool finds several other bogus chips instead. I will try to compare dmesg logs to see if its maybe a different IO (even though Superiotool.log and datasheet say 0x295 clearly).

To view, visit change 32235. To unsubscribe, or for help writing mail filters, visit settings.