Furquan Shaikh submitted this change.
mb/google/octopus/variants/bobba: Add G2Touch touchscreen support
Add G2Touch touchscreen support for bobba.
BUG=b:171636614, b:169730666
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen
work.
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: Ia361a56c050d7cbd7325b3c09fc34d8707441cc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
---
M src/mainboard/google/octopus/variants/bobba/overridetree.cb
1 file changed, 14 insertions(+), 0 deletions(-)
diff --git a/src/mainboard/google/octopus/variants/bobba/overridetree.cb b/src/mainboard/google/octopus/variants/bobba/overridetree.cb
index 662e6af..3c7187e 100644
--- a/src/mainboard/google/octopus/variants/bobba/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/bobba/overridetree.cb
@@ -210,6 +210,20 @@
register "has_power_resource" = "1"
device i2c 39 on end
end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""GTCH7502""
+ register "generic.desc" = ""G2TOUCH Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_212_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)"
+ register "generic.reset_delay_ms" = "70"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)"
+ register "generic.enable_delay_ms" = "1"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 40 on end
+ end
end # - I2C 7
end
To view, visit change 46808. To unsubscribe, or for help writing mail filters, visit settings.