HAOUAS Elyes has uploaded this change for review.

View Change

src/Kconfig: Move DRAM section to 'Devices' menu

This moves DRAM to 'Devices' menu and allow to change default
DIMM_MAX value if needed.

Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
---
M src/Kconfig
M src/device/Kconfig
2 files changed, 24 insertions(+), 25 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/32882/1

diff --git a/src/Kconfig b/src/Kconfig
index 2c9dc4a..d30aa99 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -1158,31 +1158,6 @@
 	  implies configurability usually found on SoCs, particularly the
 	  ability to control internal pull resistors.
 
-config GENERIC_SPD_BIN
-	bool
-	help
-	  If enabled, add support for adding spd.hex files in cbfs as spd.bin
-	  and locating it runtime to load SPD. Additionally provide provision to
-	  fetch SPD over SMBus.
-
-config DIMM_MAX
-	int
-	default 4
-	help
-	  Total number of memory DIMM slots available on motherboard.
-	  It is multiplication of number of channel to number of DIMMs per
-	  channel
-
-config DIMM_SPD_SIZE
-	int
-	default 256
-	help
-	  Total SPD size that will be used for DIMM.
-	  Ex: DDR3 256, DDR4 512.
-
-config SPD_READ_BY_WORD
-	bool
-
 config BOOTBLOCK_CUSTOM
 	# To be selected by arch, SoC or mainboard if it does not want use the normal
 	# src/lib/bootblock.c#main() C entry point.
diff --git a/src/device/Kconfig b/src/device/Kconfig
index 0539062..d4cacec 100644
--- a/src/device/Kconfig
+++ b/src/device/Kconfig
@@ -681,5 +681,29 @@
 	  be useful for debugging or on platforms where a driver for the real
 	  I2C controller is not (yet) available. The platform code needs to
 	  provide bindings to manually toggle I2C lines.
+config GENERIC_SPD_BIN
+	bool
+	help
+	  If enabled, add support for adding spd.hex files in cbfs as spd.bin
+	  and locating it runtime to load SPD. Additionally provide provision to
+	  fetch SPD over SMBus.
+
+config DIMM_MAX
+	int "Total number of memory DIMM slots"
+	default 4
+	help
+	  Total number of memory DIMM slots available on motherboard.
+	  It is multiplication of number of channel to number of DIMMs per
+	  channel
+
+config DIMM_SPD_SIZE
+	int
+	default 256
+	help
+	  Total SPD size that will be used for DIMM.
+	  Ex: DDR3 256, DDR4 512.
+
+config SPD_READ_BY_WORD
+	bool
 
 endmenu

To view, visit change 32882. To unsubscribe, or for help writing mail filters, visit settings.