Felix Held submitted this change.
mb/google/zork: update USB 2.0 controller Lane Parameter for berknip
Enhance USB 2.0 C0/C1 A0/A1 SI by increasing the level of
"HS DC Voltage Level" and " Disconnect Threshold Adjustment" registers.
COMPDISTUNE0: 0x3->0x7
TXVREFTUNE0: 0x6->0xf
BUG=b:166398726
BRANCH=zork
TEST=1. emerge-zork coreboot
2. check U2 register is set correctly.
3. U2 SI all pass
Change-Id: I69d942605c6d43ece0d71f67df3a5e00b998219b
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46545
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/mainboard/google/zork/variants/berknip/overridetree.cb
1 file changed, 48 insertions(+), 0 deletions(-)
diff --git a/src/mainboard/google/zork/variants/berknip/overridetree.cb b/src/mainboard/google/zork/variants/berknip/overridetree.cb
index 674d557..d97a2b5 100644
--- a/src/mainboard/google/zork/variants/berknip/overridetree.cb
+++ b/src/mainboard/google/zork/variants/berknip/overridetree.cb
@@ -21,6 +21,54 @@
register "telemetry_vddcr_soc_offset" = "0"
# End : OPN Performance Configuration
+ # USB 2.0 strength
+ register "usb_2_port_tune_params[0]" = "{
+ .com_pds_tune = 0x07,
+ .sq_rx_tune = 0x3,
+ .tx_fsls_tune = 0x3,
+ .tx_pre_emp_amp_tune = 0x03,
+ .tx_pre_emp_pulse_tune = 0x0,
+ .tx_rise_tune = 0x1,
+ .rx_vref_tune = 0xf,
+ .tx_hsxv_tune = 0x3,
+ .tx_res_tune = 0x01,
+ }"
+
+ register "usb_2_port_tune_params[1]" = "{
+ .com_pds_tune = 0x07,
+ .sq_rx_tune = 0x3,
+ .tx_fsls_tune = 0x3,
+ .tx_pre_emp_amp_tune = 0x03,
+ .tx_pre_emp_pulse_tune = 0x0,
+ .tx_rise_tune = 0x1,
+ .rx_vref_tune = 0xf,
+ .tx_hsxv_tune = 0x3,
+ .tx_res_tune = 0x01,
+ }"
+
+ register "usb_2_port_tune_params[2]" = "{
+ .com_pds_tune = 0x07,
+ .sq_rx_tune = 0x3,
+ .tx_fsls_tune = 0x3,
+ .tx_pre_emp_amp_tune = 0x03,
+ .tx_pre_emp_pulse_tune = 0x0,
+ .tx_rise_tune = 0x1,
+ .rx_vref_tune = 0xf,
+ .tx_hsxv_tune = 0x3,
+ .tx_res_tune = 0x01,
+ }"
+
+ register "usb_2_port_tune_params[3]" = "{
+ .com_pds_tune = 0x07,
+ .sq_rx_tune = 0x3,
+ .tx_fsls_tune = 0x3,
+ .tx_pre_emp_amp_tune = 0x03,
+ .tx_pre_emp_pulse_tune = 0x0,
+ .tx_rise_tune = 0x1,
+ .rx_vref_tune = 0xf,
+ .tx_hsxv_tune = 0x3,
+ .tx_res_tune = 0x01,
+ }"
# Enable I2C2 for trackpad, touchscreen, pen at 400kHz
register "i2c[2]" = "{
To view, visit change 46545. To unsubscribe, or for help writing mail filters, visit settings.