Patrick Georgi submitted this change.
mb/google/volteer/variants/volteer: clean up gpio.c
Remove an unneccessary comment and group the variant_early_gpio_table
together based on GPIO group.
Changed static variable name gpio_table to override_gpio_table to be
more descriptive.
BUG=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer to kernel.
Change-Id: Iabe810df1e5a3df35e3543ab81b9fdb6f76c223a
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42577
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/mainboard/google/volteer/variants/volteer/gpio.c
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/src/mainboard/google/volteer/variants/volteer/gpio.c b/src/mainboard/google/volteer/variants/volteer/gpio.c
index 075e6e2..2b99e52 100644
--- a/src/mainboard/google/volteer/variants/volteer/gpio.c
+++ b/src/mainboard/google/volteer/variants/volteer/gpio.c
@@ -5,8 +5,7 @@
#include <commonlib/helpers.h>
/* Pad configuration in ramstage */
-/* Leave eSPI pins untouched from default settings */
-static const struct pad_config gpio_table[] = {
+static const struct pad_config override_gpio_table[] = {
/* A7 : I2S2_SCLK ==> EN_PP3300_TRACKPAD */
PAD_CFG_GPO(GPP_A7, 1, DEEP),
/* A8 : I2S2_SFRM ==> EN_PP3300_TOUCHSCREEN */
@@ -211,31 +210,24 @@
static const struct pad_config early_gpio_table[] = {
/* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */
PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
-
/* A17 : DDSP_HPDC ==> MEM_CH_SEL */
PAD_CFG_GPI(GPP_A17, NONE, DEEP),
/* B11 : PMCALERT# ==> PCH_WP_OD */
PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
-
/* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */
PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
-
/* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */
PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
-
/* B17 : GSPI0_MISO ==> PCH_GSPIO_H1_TPM_MISO */
PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
-
/* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */
PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
/* C0 : SMBCLK ==> EN_PP3300_WLAN */
PAD_CFG_GPO(GPP_C0, 1, DEEP),
-
/* C21 : UART2_TXD ==> H1_PCH_INT_ODL */
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
-
/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
PAD_CFG_GPO(GPP_C22, 0, DEEP),
@@ -244,7 +236,6 @@
/* F11 : THC1_SPI2_CLK ==> EN_PP3300_WWAN */
PAD_CFG_GPO(GPP_F11, 1, DEEP),
-
/* F12 : GSXDOUT ==> WWAN_RST_ODL
To meet timing constrains - drive reset low.
Deasserted in ramstage. */
@@ -256,8 +247,8 @@
const struct pad_config *variant_override_gpio_table(size_t *num)
{
- *num = ARRAY_SIZE(gpio_table);
- return gpio_table;
+ *num = ARRAY_SIZE(override_gpio_table);
+ return override_gpio_table;
}
const struct pad_config *variant_early_gpio_table(size_t *num)
To view, visit change 42577. To unsubscribe, or for help writing mail filters, visit settings.