Mariusz Szafranski has uploaded this change for review.
vendorcode/intel/fsp/fsp2_0/denverton_ns: Add FSP header files for Denverton_NS SoC
Change-Id: I9672610df09089c549e74072345781bea0b4d06f
Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com>
---
A src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h
A src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h
A src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h
A src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h
4 files changed, 1,156 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/05/20805/1
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h
new file mode 100644
index 0000000..ec523a4
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h
@@ -0,0 +1,48 @@
+/** @file
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPUPD_H__
+#define __FSPUPD_H__
+
+#include <FspEas.h>
+
+#pragma pack(push, 1)
+
+#define FSPT_UPD_SIGNATURE 0x545F445055564E44 /* 'DNVUPD_T' */
+
+#define FSPM_UPD_SIGNATURE 0x4D5F445055564E44 /* 'DNVUPD_M' */
+
+#define FSPS_UPD_SIGNATURE 0x535F445055564E44 /* 'DNVUPD_S' */
+
+#pragma pack(pop)
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h
new file mode 100644
index 0000000..cf0e36d
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h
@@ -0,0 +1,710 @@
+/** @file
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPMUPD_H__
+#define __FSPMUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(push, 1)
+
+#define MAX_CH 2 /* Maximum Number of Memory Channels */
+#define MAX_DIMM 2 /* Maximum Number of DIMMs PER Memory Channel */
+#define MAX_SPD_BYTES 512 /* Maximum Number of SPD bytes */
+
+/*
+ * Memory Down structures.
+ */
+typedef enum {
+ STATE_MEMORY_SLOT = 0, /* No memory down and a physical memory slot. */
+ STATE_MEMORY_DOWN = 1, /* Memory down and not a physical memory slot. */
+} MemorySlotState;
+
+typedef struct {
+ MemorySlotState SlotState[MAX_CH][MAX_DIMM]; /* Memory Down state of
+ each DIMM in each
+ Channel */
+ UINT16 SpdDataLen; /* Length in Bytes of a single DIMM's SPD Data */
+ UINT8 *SpdDataPtr[MAX_CH][MAX_DIMM]; /* Pointer to SPD Data for each
+ DIMM in each Channel */
+} MEMORY_DOWN_CONFIG;
+
+/*
+* SMBIOS Memory Info structures.
+*/
+typedef struct {
+ UINT8 DimmId;
+ UINT32 SizeInMb;
+ UINT16 MfgId;
+ UINT8
+ ModulePartNum[20]; /* Module part number for DDR3 is 18 bytes
+ however for DRR4 20 bytes as per JEDEC Spec,
+ so reserving 20 bytes */
+} DIMM_INFO;
+
+typedef struct {
+ UINT8 ChannelId;
+ UINT8 DimmCount;
+ DIMM_INFO DimmInfo[MAX_DIMM];
+} CHANNEL_INFO;
+
+typedef struct {
+ UINT8 Revision;
+ UINT16 DataWidth;
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.18.2 and Table 75
+ **/
+ UINT8 MemoryType;
+ UINT16 MemoryFrequencyInMHz;
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.17.3 and Table 72
+ **/
+ UINT8 ErrorCorrectionType;
+ UINT8 ChannelCount;
+ CHANNEL_INFO ChannelInfo[MAX_CH];
+} FSP_SMBIOS_MEMORY_INFO;
+
+/*
+* GBE PCD supported states.
+*/
+typedef enum {
+ BL_GBE0_GBE1_DISABLED,
+ BL_GBE0_GBE1_ENABLED,
+ BL_GBE1_DISABLED,
+} BL_GBE_PCD_STATE;
+
+/*
+* FIA MUX configuration structures.
+*/
+
+#define BL_ME_FIA_MUX_LANE_NUM_MAX 20
+#define BL_ME_FIA_MUX_LANE_NUM_MIN 1
+#define BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH 2
+#define BL_ME_FIA_MUX_LANE_MUX_SEL_MASK 0x3
+#define BL_ME_FIA_MUX_LANE_XHCI_ONLY 0xFF00000000
+
+typedef enum {
+ BL_FIA_LANE00 = 0,
+ BL_FIA_LANE01,
+ BL_FIA_LANE02,
+ BL_FIA_LANE03,
+ BL_FIA_LANE04,
+ BL_FIA_LANE05,
+ BL_FIA_LANE06,
+ BL_FIA_LANE07,
+ BL_FIA_LANE08,
+ BL_FIA_LANE09,
+ BL_FIA_LANE10,
+ BL_FIA_LANE11,
+ BL_FIA_LANE12,
+ BL_FIA_LANE13,
+ BL_FIA_LANE14,
+ BL_FIA_LANE15,
+ BL_FIA_LANE16,
+ BL_FIA_LANE17,
+ BL_FIA_LANE18,
+ BL_FIA_LANE19,
+} BL_ME_FIA_MUX_LANE_ORDER;
+
+#define BL_ME_FIA_MUX_LANE_SATA0_BEGING BL_FIA_LANE04
+#define BL_ME_FIA_MUX_LANE_SATA1_BEGING BL_FIA_LANE12
+
+#define BL_FIA_LANE_CONFIG(Config, Lane) \
+ ((UINT64)((UINT64)(Config) \
+ << ((UINT64)(Lane) * (BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH))))
+
+typedef union _BL_ME_FIA_MUX_CONFIG {
+ UINT64 MeFiaMuxLaneConfig;
+ struct {
+ UINT64 Lane00MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
+ UINT64 Lane01MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
+ UINT64 Lane02MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
+ UINT64 Lane03MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
+ UINT64 Lane04MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane05MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane06MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane07MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane08MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane09MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane10MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane11MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane12MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane13MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane14MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane15MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
+ // SATA
+ UINT64 Lane16MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
+ // SATA
+ UINT64 Lane17MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
+ // SATA
+ UINT64 Lane18MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
+ // SATA
+ UINT64 Lane19MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
+ // SATA
+ UINT64 Reserved : 24;
+ } BL_MeFiaMuxLaneMuxSel;
+} BL_ME_FIA_MUX_CONFIG;
+
+typedef enum {
+ BL_ME_FIA_MUX_LANE_DISCONNECTED,
+ BL_ME_FIA_MUX_LANE_PCIE,
+ BL_ME_FIA_MUX_LANE_SATA,
+ BL_ME_FIA_MUX_LANE_XHCI,
+} BL_ME_FIA_MUX_LANE_CONFIG;
+
+#define BL_ME_FIA_SATA_LANE_SEL_WIDTH 2
+#define BL_ME_FIA_SATA_LANE_XHCI_ONLY 0x55000000
+
+typedef enum {
+ BL_FIA_SATA_LANE04 = 0,
+ BL_FIA_SATA_LANE05,
+ BL_FIA_SATA_LANE06,
+ BL_FIA_SATA_LANE07,
+ BL_FIA_SATA_LANE08,
+ BL_FIA_SATA_LANE09,
+ BL_FIA_SATA_LANE10,
+ BL_FIA_SATA_LANE11,
+ BL_FIA_SATA_LANE12,
+ BL_FIA_SATA_LANE13,
+ BL_FIA_SATA_LANE14,
+ BL_FIA_SATA_LANE15,
+ BL_FIA_SATA_LANE16,
+ BL_FIA_SATA_LANE17,
+ BL_FIA_SATA_LANE18,
+ BL_FIA_SATA_LANE19
+} BL_ME_FIA_SATA_LANE_ORDER;
+
+#define BL_FIA_SATA_LANE_CONFIG(Config, Lane) \
+ ((UINT32)((UINT32)(Config) \
+ << ((UINT32)(Lane) * (BL_ME_FIA_SATA_LANE_SEL_WIDTH))))
+
+typedef union _BL_ME_FIA_SATA_CONFIG {
+ UINT64 MeFiaSataLaneConfig;
+ struct {
+ UINT64 Lane04SataSel : 2;
+ UINT64 Lane05SataSel : 2;
+ UINT64 Lane06SataSel : 2;
+ UINT64 Lane07SataSel : 2;
+ UINT64 Lane08SataSel : 2;
+ UINT64 Lane09SataSel : 2;
+ UINT64 Lane10SataSel : 2;
+ UINT64 Lane11SataSel : 2;
+ UINT64 Lane12SataSel : 2;
+ UINT64 Lane13SataSel : 2;
+ UINT64 Lane14SataSel : 2;
+ UINT64 Lane15SataSel : 2;
+ UINT64 Lane16SataSel : 2;
+ UINT64 Lane17SataSel : 2;
+ UINT64 Lane18SataSel : 2;
+ UINT64 Lane19SataSel : 2;
+ UINT64 Reserved : 32;
+ } BL_MeFiaSataLaneSataSel;
+} BL_ME_FIA_SATA_CONFIG;
+
+typedef enum {
+ BL_ME_FIA_SATA_CONTROLLER_LANE_ASSIGNED = 0,
+ BL_ME_FIA_SATA_CONTROLLER_LANE_NOT_ASSIGNED = 1,
+ BL_ME_FIA_SATA_CONTROLLER_LANE_SS_AND_GPIO_ASSIGNED = 3
+} BL_ME_FIA_SATA_LANE_CONFIG;
+
+#define BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH 4
+#define BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH 8
+#define BL_ME_FIA_PCIE_ROOT_CONFIG_XHCI_ONLY 0x0
+
+typedef enum {
+ BL_FIA_PCIE_ROOT_PORT_0 = 0,
+ BL_FIA_PCIE_ROOT_PORT_1,
+ BL_FIA_PCIE_ROOT_PORT_2,
+ BL_FIA_PCIE_ROOT_PORT_3,
+ BL_FIA_PCIE_ROOT_PORT_4,
+ BL_FIA_PCIE_ROOT_PORT_5,
+ BL_FIA_PCIE_ROOT_PORT_6,
+ BL_FIA_PCIE_ROOT_PORT_7
+} BL_ME_FIA_PCIE_ROOT_PORT_ORDER;
+
+#define BL_FIA_PCIE_ROOT_PORT_CONFIG(Type, Config, PcieRootPort) \
+ (((Type) == BL_ME_FIA_PCIE_ROOT_PORT_STATE) \
+ ? ((UINT64)((UINT64)(Config) << (UINT64)(PcieRootPort))) \
+ : ((UINT64)( \
+ (UINT64)(Config) << (UINT64)( \
+ ((UINT64)(PcieRootPort) * \
+ (BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH)) + \
+ BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH))))
+
+typedef union _BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG {
+ UINT64 MeFiaPcieRootPortsConfig;
+ struct {
+ UINT64 PcieRp0En : 1;
+ UINT64 PcieRp1En : 1;
+ UINT64 PcieRp2En : 1;
+ UINT64 PcieRp3En : 1;
+ UINT64 PcieRp4En : 1;
+ UINT64 PcieRp5En : 1;
+ UINT64 PcieRp6En : 1;
+ UINT64 PcieRp7En : 1;
+ UINT64 PcieRp0LinkWidth : 4;
+ UINT64 PcieRp1LinkWidth : 4;
+ UINT64 PcieRp2LinkWidth : 4;
+ UINT64 PcieRp3LinkWidth : 4;
+ UINT64 PcieRp4LinkWidth : 4;
+ UINT64 PcieRp5LinkWidth : 4;
+ UINT64 PcieRp6LinkWidth : 4;
+ UINT64 PcieRp7LinkWidth : 4;
+ UINT64 Reserved : 24;
+ } BL_MeFiaPcieRpConfig;
+} BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG;
+
+typedef enum {
+ BL_ME_FIA_PCIE_ROOT_PORT_STATE,
+ BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH
+} BL_ME_FIA_PCIE_ROOT_PORT_CONFIG_TYPE;
+
+typedef enum {
+ BL_ME_FIA_PCIE_ROOT_PORT_DISABLED,
+ BL_ME_FIA_PCIE_ROOT_PORT_ENABLED
+} BL_ME_FIA_PCIE_ROOT_PORT_STATE_CONFIG;
+
+typedef enum {
+ BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_BICTRL = 0,
+ BL_ME_FIA_PCIE_ROOT_PORT_LINK_X1 = 0xF
+} BL_ME_FIA_PCIE_ROOT_PORT_LINK_CONFIG;
+
+typedef struct _BL_ME_FIA_CONFIG {
+ BL_ME_FIA_MUX_CONFIG MuxConfiguration;
+ BL_ME_FIA_SATA_CONFIG SataLaneConfiguration;
+ BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG PcieRootPortsConfiguration;
+} BL_ME_FIA_CONFIG;
+
+/*
+ * The FIA_MUX_CONFIG block describes the expected configuration of
+ * FIA MUX configuration.
+ */
+typedef struct {
+ UINT32 SkuNumLanesAllowed; // Platform view of Num Lanes allowed
+ BL_ME_FIA_CONFIG FiaMuxConfig; // Current Platform FIA MUX Configuration
+ BL_ME_FIA_CONFIG FiaMuxConfigRequest; // FIA MUX Configuration Requested
+} BL_FIA_MUX_CONFIG;
+
+/*
+ * The FIA_MUX_CONFIG_STATUS describes the status of configuring
+ * FIA MUX configuration.
+*/
+typedef struct {
+ UINT64 FiaMuxConfigGetStatus; // Status returned from FiaMuxConfigGet,
+ // if not EFI_SUCCESS, then error occurred
+ // and user can decide on next steps
+ UINT64 FiaMuxConfigSetStatus; // Status returned from FiaMuxConfigSet,
+ // if not EFI_SUCCESS, then error occurred
+ // and user can decide on next steps
+ BOOLEAN FiaMuxConfigSetRequired; // Boolean: true - a FiaMuxConfigSet
+ // was required, false otherwise
+} BL_FIA_MUX_CONFIG_STATUS;
+
+/*
+* FIA MUX Config HOB structure
+*/
+typedef struct {
+ BL_FIA_MUX_CONFIG FiaMuxConfig;
+ BL_FIA_MUX_CONFIG_STATUS FiaMuxConfigStatus;
+} BL_FIA_MUX_CONFIG_HOB;
+
+/* PCIe port bifurcation codes - matches setup option values */
+#define PCIE_BIF_CTRL_x2x2x2x2 0
+#define PCIE_BIF_CTRL_x2x2x4 1
+#define PCIE_BIF_CTRL_x4x2x2 2
+#define PCIE_BIF_CTRL_x4x4 3
+#define PCIE_BIF_CTRL_x8 4
+
+#define BL_MAX_PCIE_CTRL 2
+
+/*
+ * HSIO INFORMATION structure
+ */
+typedef enum {
+ BL_SKU_HSIO_06 = 6,
+ BL_SKU_HSIO_08 = 8,
+ BL_SKU_HSIO_10 = 10,
+ BL_SKU_HSIO_12 = 12,
+ BL_SKU_HSIO_20 = 20,
+} BL_SKU_HSIO_LANE_NUMBER;
+
+typedef struct {
+ UINT16 NumLanesSupported;
+ UINT8 PcieBifCtr[BL_MAX_PCIE_CTRL];
+ BL_ME_FIA_CONFIG FiaConfig;
+} BL_HSIO_INFORMATION;
+
+/*
+ * eMMC DLL structure for EMMC DLL registers settings
+ */
+typedef struct {
+ UINT32 TxCmdCntl;
+ UINT32 TxDataCntl1;
+ UINT32 TxDataCntl2;
+ UINT32 RxCmdDataCntl1;
+ UINT32 RxStrobeCntl;
+ UINT32 RxCmdDataCntl2;
+ UINT32 MasterSwCntl;
+} BL_EMMC_DLL_CONFIG;
+
+typedef struct {
+ UINT16 Signature;
+ BL_EMMC_DLL_CONFIG eMMCDLLConfig;
+} BL_EMMC_INFORMATION;
+
+typedef enum {
+ BL_FAST_BOOT_CHECKER_NORMAL = 0,
+ BL_FAST_BOOT_CHECKER_WARNING,
+ BL_FAST_BOOT_CHECKER_CRITICAL
+} BL_FAST_BOOT_CHECKER;
+
+#define BL_MAX_SCRUB_SEGMENTS 5
+
+typedef struct {
+ UINT16 Start; // Determines the low range for a memory segment (in MB)
+ UINT16 End; // Determines the high range for a memory segment (in MB)
+} BL_SCRUB_SEGMENT;
+
+typedef struct {
+ UINT8 NumberOfSegments;
+ UINT8 Reserved;
+ BL_SCRUB_SEGMENT ScrubSegment[BL_MAX_SCRUB_SEGMENTS];
+} BL_MEMORY_SCRUB_SEGMENTS;
+
+/** Fsp M Configuration
+**/
+typedef struct {
+
+ /** Offset 0x0040 - Tseg Size
+ Size of SMRAM memory reserved.
+ 2:2 MB, 4:4 MB, 8:8 MB, 16:16 MB
+ **/
+ UINT8 PcdSmmTsegSize;
+
+ /** Offset 0x0041 - FSP Debug Print Level
+ Select the FSP debug message print level.
+ 0:NO DEBUG, 1:MIN DEBUG, 2:MED DEBUG, 3:VERBOSE DEBUG
+ **/
+ UINT8 PcdFspDebugPrintErrorLevel;
+
+ /** Offset 0x0042 - Channel 0 DIMM 0 SPD SMBus Address
+ SPD SMBus Address of each DIMM slot.
+ **/
+ UINT8 PcdSpdSmbusAddress_0_0;
+
+ /** Offset 0x0043 - Channel 0 DIMM 1 SPD SMBus Address
+ SPD SMBus Address of each DIMM slot.
+ **/
+ UINT8 PcdSpdSmbusAddress_0_1;
+
+ /** Offset 0x0044 - Channel 1 DIMM 0 SPD SMBus Address
+ SPD SMBus Address of each DIMM slot.
+ **/
+ UINT8 PcdSpdSmbusAddress_1_0;
+
+ /** Offset 0x0045 - Channel 1 DIMM 1 SPD SMBus Address
+ SPD SMBus Address of each DIMM slot.
+ **/
+ UINT8 PcdSpdSmbusAddress_1_1;
+
+ /** Offset 0x0046 - Enable Rank Margin Tool
+ Enable/disable Rank Margin Tool.
+ $EN_DIS
+ **/
+ UINT8 PcdMrcRmtSupport;
+
+ /** Offset 0x0047 - RMT CPGC exp_loop_cnt
+ Set the CPGC exp_loop_cnt field for RMT execution 2^(exp_loop_cnt -1).
+ 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12,
+ 13:13, 14:14, 15:15
+ **/
+ UINT8 PcdMrcRmtCpgcExpLoopCntValue;
+
+ /** Offset 0x0048 - RMT CPGC num_bursts
+ Set the CPGC num_bursts field for RMT execution 2^(num_bursts -1).
+ 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12,
+ 13:13, 14:14, 15:15
+ **/
+ UINT8 PcdMrcRmtCpgcNumBursts;
+
+ /** Offset 0x0049 - Preserve Memory Across Reset
+ Enable/disable memory preservation across reset.
+ $EN_DIS
+ **/
+ UINT8 PcdMemoryPreservation;
+
+ /** Offset 0x004A - Fast Boot
+ Enable/disable Fast Boot function. Once enabled, all following boots
+ will use the
+ presaved MRC data to improve the boot performance.
+ $EN_DIS
+ **/
+ UINT8 PcdFastBoot;
+
+ /** Offset 0x004B - ECC Support
+ Enable/disable ECC Support.
+ $EN_DIS
+ **/
+ UINT8 PcdEccSupport;
+
+ /** Offset 0x004C - HSUART Device
+ Select the PCI High Speed UART Device for Serial Port.
+ 0:HSUART0, 1:HSUART1, 2:HSUART2
+ **/
+ UINT8 PcdHsuartDevice;
+
+ /** Offset 0x004D - Memory Down
+ Enable/disable Memory Down function.
+ $EN_DIS
+ **/
+ UINT8 PcdMemoryDown;
+
+ /** Offset 0x004E
+ **/
+ UINT32 PcdMemoryDownConfigPtr;
+
+ /** Offset 0x0052 - SATA Controller 0
+ Enable/disable SATA Controller 0.
+ $EN_DIS
+ **/
+ UINT8 PcdEnableSATA0;
+
+ /** Offset 0x0053 - SATA Controller 1
+ Enable/disable SATA Controller 1.
+ $EN_DIS
+ **/
+ UINT8 PcdEnableSATA1;
+
+ /** Offset 0x0054 - Intel Quick Assist Technology
+ Enable/disable Intel Quick Assist Technology.
+ $EN_DIS
+ **/
+ UINT8 PcdEnableIQAT;
+
+ /** Offset 0x0055 - SPD Write Disable
+ Select SMBus SPD Write Enable State (Default: 0 = [FORCE_ENABLE], 1 =
+ [FORCE_DISABLE])
+ 0:Force Enable, 1:Force Disable
+ **/
+ UINT8 PcdSmbusSpdWriteDisable;
+
+ /** Offset 0x0056 - ME_SHUTDOWN Message
+ Enable/Disable sending ME_SHUTDOWN message to ME, refer to FSP
+ Integration Guide
+ for details.
+ $EN_DIS
+ **/
+ UINT8 PcdEnableMeShutdown;
+
+ /** Offset 0x0057 - XHCI Controller
+ Enable / Disable XHCI controller
+ $EN_DIS
+ **/
+ UINT8 PcdEnableXhci;
+
+ /** Offset 0x0058 - Memory Frequency
+ Set DDR Memory Frequency, refer to FSP Integration Guide for details.
+ 15:Auto, 3:1600, 4:1866, 5:2133, 6:2400
+ **/
+ UINT8 PcdDdrFreq;
+
+ /** Offset 0x0059 - MMIO Size
+ Set memory mapped IO space size
+ 0:2048M, 1:1024M, 2:3072M
+ **/
+ UINT8 PcdMmioSize;
+
+ /** Offset 0x005A - ME HECI Communication
+ Enable/Disable ME HECI communication
+ $EN_DIS
+ **/
+ UINT8 PcdMeHeciCommunication;
+
+ /** Offset 0x005B - HSIO Lanes Number
+ HSIO lanes number of SKU
+ 6:6, 8:8, 10:10, 12:12, 20:20
+ **/
+ UINT8 PcdHsioLanesNumber;
+
+ /** Offset 0x005C
+ **/
+ UINT32 PcdFiaMuxConfigPtr;
+
+ /** Offset 0x0060 - Customer Revision
+ The Customer can set this revision string for their own purpose.
+ **/
+ UINT8 PcdCustomerRevision[32];
+
+ /** Offset 0x0080 - 32-Bit bus mode
+ Enable/Disable 32-Bit bus memory mode.
+ $EN_DIS
+ **/
+ UINT8 PcdHalfWidthEnable;
+
+ /** Offset 0x0081 - TCL Performance
+ Enable/Disable Tcl timing for performance.
+ $EN_DIS
+ **/
+ UINT8 PcdTclIdle;
+
+ /** Offset 0x0082 - Interleave Mode
+ Select Interleave Mode
+ 0:DISABLED, 1:MODE0, 2:MODE1, 3:MODE2
+ **/
+ UINT8 PcdInterleaveMode;
+
+ /** Offset 0x0083 - Memory Thermal Throttling
+ Enable/disable Memory Thermal Throttling management mode
+ $EN_DIS
+ **/
+ UINT8 PcdMemoryThermalThrottling;
+
+ /** Offset 0x0084 - Memory Test
+ Enable / Disable Memory Test, refer to FSP Integration Guide for
+ details.
+ $EN_DIS
+ **/
+ UINT8 PcdSkipMemoryTest;
+
+ /** Offset 0x0085
+ **/
+ BL_MEMORY_SCRUB_SEGMENTS *PcdScrubSegmentPtr;
+
+ /** Offset 0x0089 - USB2 Port 1 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb2Port1Pin;
+
+ /** Offset 0x008A - USB2 Port 2 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb2Port2Pin;
+
+ /** Offset 0x008B - USB2 Port 3 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb2Port3Pin;
+
+ /** Offset 0x008C - USB2 Port 4 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb2Port4Pin;
+
+ /** Offset 0x008D - USB3 Port 1 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb3Port1Pin;
+
+ /** Offset 0x008E - USB3 Port 2 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb3Port2Pin;
+
+ /** Offset 0x008F - USB3 Port 3 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb3Port3Pin;
+
+ /** Offset 0x0090 - USB3 Port 4 OC Pin
+ Map selected OC pin to the port
+ 0:OC Pin 0, 8:No pin mapped
+ **/
+ UINT8 PcdUsb3Port4Pin;
+
+ /** Offset 0x0091 - IOxAPIC 0-199
+ Enable/disable IOxAPIC 24-119 entries
+ $EN_DIS
+ **/
+ UINT8 PcdIOxAPIC0_199;
+
+ /** Offset 0x0092 - DMAP_X16
+ Enable/Disable DMAP_X16 dynamic MRC field indicating memory device
+ width is x16 or not
+ $EN_DIS
+ **/
+ UINT8 PcdDmapX16;
+
+ /** Offset 0x0093
+ **/
+ UINT8 UnusedUpdSpace0[333];
+
+ /** Offset 0x01E0
+ **/
+ UINT8 ReservedMemoryInitUpd[16];
+} FSP_M_CONFIG;
+
+/** Fsp M UPD Configuration
+**/
+typedef struct {
+
+ /** Offset 0x0000
+ **/
+ FSP_UPD_HEADER FspUpdHeader;
+
+ /** Offset 0x0020
+ **/
+ FSPM_ARCH_UPD FspmArchUpd;
+
+ /** Offset 0x0040
+ **/
+ FSP_M_CONFIG FspmConfig;
+
+ /** Offset 0x01F0
+ **/
+ UINT8 UnusedUpdSpace1[14];
+
+ /** Offset 0x01FE
+ **/
+ UINT16 UpdTerminator;
+} FSPM_UPD;
+
+#pragma pack(pop)
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h
new file mode 100644
index 0000000..d861800
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h
@@ -0,0 +1,289 @@
+/** @file
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPSUPD_H__
+#define __FSPSUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(push, 1)
+
+/** Fsp S Configuration
+**/
+typedef struct {
+
+ /** Offset 0x0020 - PCIe Controller 0 Bifurcation
+ Configure PCI Express controller 0 bifurcation.
+ 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8
+ **/
+ UINT8 PcdBifurcationPcie0;
+
+ /** Offset 0x0021 - PCIe Controller 1 Bifurcation
+ Configure PCI Express controller 1 bifurcation.
+ 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8
+ **/
+ UINT8 PcdBifurcationPcie1;
+
+ /** Offset 0x0022 - Active Core Count
+ Select # of Active Cores (Default: 0, 0:ALL, 1..15 = 1..15 Cores)
+ 0:ALL, 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11,
+ 12:12, 13:13,
+ 14:14, 15:15
+ **/
+ UINT8 PcdActiveCoreCount;
+
+ /** Offset 0x0023
+ **/
+ UINT32 PcdCpuMicrocodePatchBase;
+
+ /** Offset 0x0027
+ **/
+ UINT32 PcdCpuMicrocodePatchSize;
+
+ /** Offset 0x002B - PCIe Controller 0
+ Enable / Disable PCI Express controller 0
+ $EN_DIS
+ **/
+ UINT8 PcdEnablePcie0;
+
+ /** Offset 0x002C - PCIe Controller 1
+ Enable / Disable PCI Express controller 1
+ $EN_DIS
+ **/
+ UINT8 PcdEnablePcie1;
+
+ /** Offset 0x002D - Embedded Multi-Media Controller (eMMC)
+ Enable / Disable Embedded Multi-Media controller
+ $EN_DIS
+ **/
+ UINT8 PcdEnableEmmc;
+
+ /** Offset 0x002E - LAN Controllers
+ Enable / Disable LAN controllers, refer to FSP Integration Guide for
+ details.
+ 0:Disable LAN 0 & LAN 1, 1:Enable LAN 0 & LAN 1, 2:Disable LAN 1 only
+ **/
+ UINT8 PcdEnableGbE;
+
+ /** Offset 0x002F
+ **/
+ UINT32 PcdFiaMuxConfigRequestPtr;
+
+ /** Offset 0x0033
+ **/
+ UINT32 UnusedUpdSpace0;
+
+ /** Offset 0x0037 - PCIe Root Port 0 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort0DeEmphasis;
+
+ /** Offset 0x0038 - PCIe Root Port 1 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort1DeEmphasis;
+
+ /** Offset 0x0039 - PCIe Root Port 2 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort2DeEmphasis;
+
+ /** Offset 0x003A - PCIe Root Port 3 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort3DeEmphasis;
+
+ /** Offset 0x003B - PCIe Root Port 4 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort4DeEmphasis;
+
+ /** Offset 0x003C - PCIe Root Port 5 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort5DeEmphasis;
+
+ /** Offset 0x003D - PCIe Root Port 6 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort6DeEmphasis;
+
+ /** Offset 0x003E - PCIe Root Port 7 DeEmphasis
+ Desired DeEmphasis level for PCIE root port
+ 0:6dB, 1:3.5dB
+ **/
+ UINT8 PcdPcieRootPort7DeEmphasis;
+
+ /** Offset 0x003F
+ **/
+ UINT8 UnusedUpdSpace1;
+
+ /** Offset 0x0040
+ **/
+ UINT32 PcdEMMCDLLConfigPtr;
+
+ /** Offset 0x0044 - PCIe Root Port 0 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort0LinkSpeed;
+
+ /** Offset 0x0045 - PCIe Root Port 1 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort1LinkSpeed;
+
+ /** Offset 0x0046 - PCIe Root Port 2 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort2LinkSpeed;
+
+ /** Offset 0x0047 - PCIe Root Port 3 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort3LinkSpeed;
+
+ /** Offset 0x0048 - PCIe Root Port 4 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort4LinkSpeed;
+
+ /** Offset 0x0049 - PCIe Root Port 5 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort5LinkSpeed;
+
+ /** Offset 0x004A - PCIe Root Port 6 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort6LinkSpeed;
+
+ /** Offset 0x004B - PCIe Root Port 7 Link Speed
+ Upper limit on link operational speed for PCI Express RootPort
+ 1:GEN1, 2:GEN2, 3:GEN3
+ **/
+ UINT8 PcdPcieRootPort7LinkSpeed;
+
+ /** Offset 0x004C - PCIe Root Port 0 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort0Aspm;
+
+ /** Offset 0x004D - PCIe Root Port 1 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort1Aspm;
+
+ /** Offset 0x004E - PCIe Root Port 2 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort2Aspm;
+
+ /** Offset 0x004F - PCIe Root Port 3 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort3Aspm;
+
+ /** Offset 0x0050 - PCIe Root Port 4 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort4Aspm;
+
+ /** Offset 0x0051 - PCIe Root Port 5 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort5Aspm;
+
+ /** Offset 0x0052 - PCIe Root Port 6 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort6Aspm;
+
+ /** Offset 0x0053 - PCIe Root Port 7 ASPM
+ Enable PCI Express Active State Power Management settings
+ 0:Disabled, 2:L1
+ **/
+ UINT8 PcdPcieRootPort7Aspm;
+
+ /** Offset 0x0054
+ **/
+ UINT8 UnusedUpdSpace2[140];
+
+ /** Offset 0x00E0
+ **/
+ UINT8 ReservedSiliconInitUpd[16];
+} FSP_S_CONFIG;
+
+/** Fsp S UPD Configuration
+**/
+typedef struct {
+
+ /** Offset 0x0000
+ **/
+ FSP_UPD_HEADER FspUpdHeader;
+
+ /** Offset 0x0020
+ **/
+ FSP_S_CONFIG FspsConfig;
+
+ /** Offset 0x00F0
+ **/
+ UINT8 UnusedUpdSpace3[14];
+
+ /** Offset 0x00FE
+ **/
+ UINT16 UpdTerminator;
+} FSPS_UPD;
+
+#pragma pack(pop)
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h
new file mode 100644
index 0000000..cca90f0
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h
@@ -0,0 +1,109 @@
+/** @file
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPTUPD_H__
+#define __FSPTUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(push, 1)
+
+/** Fsp T Core UPD
+**/
+typedef struct {
+
+ /** Offset 0x0020
+ **/
+ UINT32 MicrocodeRegionBase;
+
+ /** Offset 0x0024
+ **/
+ UINT32 MicrocodeRegionLength;
+
+ /** Offset 0x0028
+ **/
+ UINT32 CodeRegionBase;
+
+ /** Offset 0x002C
+ **/
+ UINT32 CodeRegionLength;
+
+ /** Offset 0x0030
+ **/
+ UINT8 Reserved1[16];
+} FSPT_CORE_UPD;
+
+/** Fsp T Configuration
+**/
+typedef struct {
+
+ /** Offset 0x0040 - Disable Port80 output in FSP-T
+ Select Port80 Control in FSP-T (0:VPD-Style, 1:Enable Port80 Output,
+ 2:Disable Port80
+ Output, refer to FSP Integration Guide for details
+ 0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output
+ **/
+ UINT8 PcdFsptPort80RouteDisable;
+
+ /** Offset 0x0041
+ **/
+ UINT8 ReservedTempRamInitUpd[31];
+} FSPT_CONFIG;
+
+/** Fsp T UPD Configuration
+**/
+typedef struct {
+
+ /** Offset 0x0000
+ **/
+ FSP_UPD_HEADER FspUpdHeader;
+
+ /** Offset 0x0020
+ **/
+ FSPT_CORE_UPD FsptCoreUpd;
+
+ /** Offset 0x0040
+ **/
+ FSPT_CONFIG FsptConfig;
+
+ /** Offset 0x0060
+ **/
+ UINT8 UnusedUpdSpace0[30];
+
+ /** Offset 0x007E
+ **/
+ UINT16 UpdTerminator;
+} FSPT_UPD;
+
+#pragma pack(pop)
+
+#endif
To view, visit change 20805. To unsubscribe, visit settings.