Angel Pons has uploaded this change for review.
mb/lippert: Unify mainboards
Do it quick and dirty but in a reproducible manner. Variants will be set
up properly in subsequent commits.
Tested with BUILD_TIMELESS=1, both Lippert FrontRunner-AF and Toucan-AF
remain identical.
Change-Id: I71ff50099787e7806a9ab67429890a1c77061929
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
---
R src/mainboard/lippert/frontrunner-af/BiosCallOuts-fr.c
R src/mainboard/lippert/frontrunner-af/BiosCallOuts-tc.c
M src/mainboard/lippert/frontrunner-af/Kconfig
M src/mainboard/lippert/frontrunner-af/Kconfig.name
M src/mainboard/lippert/frontrunner-af/Makefile.inc
R src/mainboard/lippert/frontrunner-af/OemCustomize-fr.c
R src/mainboard/lippert/frontrunner-af/OemCustomize-tc.c
M src/mainboard/lippert/frontrunner-af/acpi/routing.asl
R src/mainboard/lippert/frontrunner-af/bootblock-fr.c
R src/mainboard/lippert/frontrunner-af/bootblock-tc.c
R src/mainboard/lippert/frontrunner-af/devicetree-fr.cb
R src/mainboard/lippert/frontrunner-af/devicetree-tc.cb
M src/mainboard/lippert/frontrunner-af/dsdt.asl
R src/mainboard/lippert/frontrunner-af/mainboard-fr.c
R src/mainboard/lippert/frontrunner-af/mainboard-tc.c
M src/mainboard/lippert/frontrunner-af/platform_cfg.h
R src/mainboard/lippert/frontrunner-af/variants/toucan-af/board_info.txt
D src/mainboard/lippert/toucan-af/Kconfig
D src/mainboard/lippert/toucan-af/Kconfig.name
D src/mainboard/lippert/toucan-af/Makefile.inc
D src/mainboard/lippert/toucan-af/OptionsIds.h
D src/mainboard/lippert/toucan-af/acpi/routing.asl
D src/mainboard/lippert/toucan-af/acpi/sata.asl
D src/mainboard/lippert/toucan-af/acpi/superio.asl
D src/mainboard/lippert/toucan-af/acpi/usb.asl
D src/mainboard/lippert/toucan-af/acpi_tables.c
D src/mainboard/lippert/toucan-af/buildOpts.c
D src/mainboard/lippert/toucan-af/cmos.layout
D src/mainboard/lippert/toucan-af/dsdt.asl
D src/mainboard/lippert/toucan-af/irq_tables.c
D src/mainboard/lippert/toucan-af/mptable.c
D src/mainboard/lippert/toucan-af/platform_cfg.h
32 files changed, 72 insertions(+), 2,652 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/43274/1
diff --git a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c b/src/mainboard/lippert/frontrunner-af/BiosCallOuts-fr.c
similarity index 100%
rename from src/mainboard/lippert/frontrunner-af/BiosCallOuts.c
rename to src/mainboard/lippert/frontrunner-af/BiosCallOuts-fr.c
diff --git a/src/mainboard/lippert/toucan-af/BiosCallOuts.c b/src/mainboard/lippert/frontrunner-af/BiosCallOuts-tc.c
similarity index 100%
rename from src/mainboard/lippert/toucan-af/BiosCallOuts.c
rename to src/mainboard/lippert/frontrunner-af/BiosCallOuts-tc.c
diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig b/src/mainboard/lippert/frontrunner-af/Kconfig
index 5504851..b77d23c 100644
--- a/src/mainboard/lippert/frontrunner-af/Kconfig
+++ b/src/mainboard/lippert/frontrunner-af/Kconfig
@@ -1,13 +1,16 @@
# SPDX-License-Identifier: GPL-2.0-only
-if BOARD_LIPPERT_FRONTRUNNER_AF
+if BOARD_LIPPERT_FRONTRUNNER_AF || BOARD_LIPPERT_TOUCAN_AF
config BOARD_SPECIFIC_OPTIONS
def_bool y
select CPU_AMD_AGESA_FAMILY14
select NORTHBRIDGE_AMD_AGESA_FAMILY14
select SOUTHBRIDGE_AMD_CIMX_SB800
- select SUPERIO_SMSC_SMSCSUPERIO
+ select SUPERIO_SMSC_SMSCSUPERIO if BOARD_LIPPERT_FRONTRUNNER_AF
+ # The Toucan-AF is meant to work on any COM Express Type 6 baseboard.
+ # The ADLINK ExpressBase-6 baseboard happens to use this SIO:
+ select SUPERIO_WINBOND_W83627DHG if BOARD_LIPPERT_TOUCAN_AF
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
@@ -25,10 +28,17 @@
config VARIANT_DIR
string
default "frontrunner-af" if BOARD_LIPPERT_FRONTRUNNER_AF
+ default "toucan-af" if BOARD_LIPPERT_TOUCAN_AF
+
+config DEVICETREE
+ string
+ default "devicetree-fr.cb" if BOARD_LIPPERT_FRONTRUNNER_AF
+ default "devicetree-tc.cb" if BOARD_LIPPERT_TOUCAN_AF
config MAINBOARD_PART_NUMBER
string
- default "FrontRunner-AF"
+ default "FrontRunner-AF" if BOARD_LIPPERT_FRONTRUNNER_AF
+ default "Toucan-AF" if BOARD_LIPPERT_TOUCAN_AF
config HW_MEM_HOLE_SIZEK
hex
@@ -63,4 +73,4 @@
bool
default n
-endif # BOARD_LIPPERT_FRONTRUNNER_AF
+endif # BOARD_LIPPERT_FRONTRUNNER_AF || BOARD_LIPPERT_TOUCAN_AF
diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig.name b/src/mainboard/lippert/frontrunner-af/Kconfig.name
index 2a8cba5..caf65d1 100644
--- a/src/mainboard/lippert/frontrunner-af/Kconfig.name
+++ b/src/mainboard/lippert/frontrunner-af/Kconfig.name
@@ -1,2 +1,5 @@
config BOARD_LIPPERT_FRONTRUNNER_AF
bool "FrontRunner-AF aka ADLINK CoreModule2-GF"
+
+config BOARD_LIPPERT_TOUCAN_AF
+ bool "Toucan-AF aka cExpress-GFR (+W83627DHG SIO)"
diff --git a/src/mainboard/lippert/frontrunner-af/Makefile.inc b/src/mainboard/lippert/frontrunner-af/Makefile.inc
index 1ae7939..c09a8ed 100644
--- a/src/mainboard/lippert/frontrunner-af/Makefile.inc
+++ b/src/mainboard/lippert/frontrunner-af/Makefile.inc
@@ -7,17 +7,31 @@
pci$(stripped_ahcibios_id).rom-type := optionrom
endif
-bootblock-y += bootblock.c
+ifeq ($(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF),y)
+bootblock-y += bootblock-fr.c
+else ifeq ($(CONFIG_BOARD_LIPPERT_TOUCAN_AF),y)
+bootblock-y += bootblock-tc.c
+endif
romstage-y += buildOpts.c
-romstage-y += BiosCallOuts.c
-romstage-y += OemCustomize.c
+ifeq ($(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF),y)
+romstage-y += BiosCallOuts-fr.c
+romstage-y += OemCustomize-fr.c
+else ifeq ($(CONFIG_BOARD_LIPPERT_TOUCAN_AF),y)
+romstage-y += BiosCallOuts-tc.c
+romstage-y += OemCustomize-tc.c
+endif
ramstage-y += buildOpts.c
-ramstage-y += BiosCallOuts.c
-ramstage-y += OemCustomize.c
-
-ramstage-y += variants/$(VARIANT_DIR)/mainboard.c
+ifeq ($(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF),y)
+ramstage-y += BiosCallOuts-fr.c
+ramstage-y += OemCustomize-fr.c
+ramstage-y += mainboard-fr.c
+else ifeq ($(CONFIG_BOARD_LIPPERT_TOUCAN_AF),y)
+ramstage-y += BiosCallOuts-tc.c
+ramstage-y += OemCustomize-tc.c
+ramstage-y += mainboard-tc.c
+endif
# Minimal SEMA watchdog support
romstage-y += sema.c
diff --git a/src/mainboard/lippert/frontrunner-af/OemCustomize.c b/src/mainboard/lippert/frontrunner-af/OemCustomize-fr.c
similarity index 100%
rename from src/mainboard/lippert/frontrunner-af/OemCustomize.c
rename to src/mainboard/lippert/frontrunner-af/OemCustomize-fr.c
diff --git a/src/mainboard/lippert/toucan-af/OemCustomize.c b/src/mainboard/lippert/frontrunner-af/OemCustomize-tc.c
similarity index 100%
rename from src/mainboard/lippert/toucan-af/OemCustomize.c
rename to src/mainboard/lippert/frontrunner-af/OemCustomize-tc.c
diff --git a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl
index 7b73e5d..f8b62fa 100644
--- a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl
+++ b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl
@@ -365,6 +365,7 @@
})
Name(PCIB, Package(){
+#if CONFIG(BOARD_LIPPERT_FRONTRUNNER_AF)
/* PCI slots: slot 0, slot 1, slot 2, slot 3 behind Dev14, Fun4. */
Package(){0x0004FFFF, 0, 0, 0x14 },
Package(){0x0004FFFF, 1, 0, 0x15 },
@@ -382,5 +383,20 @@
Package(){0x0007FFFF, 1, 0, 0x14 },
Package(){0x0007FFFF, 2, 0, 0x15 },
Package(){0x0007FFFF, 3, 0, 0x16 },
+#elif CONFIG(BOARD_LIPPERT_TOUCAN_AF)
+ /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
+ Package(){0x0003FFFF, 0, 0, 0x14 },
+ Package(){0x0003FFFF, 1, 0, 0x15 },
+ Package(){0x0003FFFF, 2, 0, 0x16 },
+ Package(){0x0003FFFF, 3, 0, 0x17 },
+ Package(){0x0004FFFF, 0, 0, 0x15 },
+ Package(){0x0004FFFF, 1, 0, 0x16 },
+ Package(){0x0004FFFF, 2, 0, 0x17 },
+ Package(){0x0004FFFF, 3, 0, 0x14 },
+ Package(){0x0005FFFF, 0, 0, 0x16 },
+ Package(){0x0005FFFF, 1, 0, 0x17 },
+ Package(){0x0005FFFF, 2, 0, 0x14 },
+ Package(){0x0005FFFF, 3, 0, 0x15 },
+#endif
})
}
diff --git a/src/mainboard/lippert/frontrunner-af/bootblock.c b/src/mainboard/lippert/frontrunner-af/bootblock-fr.c
similarity index 100%
rename from src/mainboard/lippert/frontrunner-af/bootblock.c
rename to src/mainboard/lippert/frontrunner-af/bootblock-fr.c
diff --git a/src/mainboard/lippert/toucan-af/bootblock.c b/src/mainboard/lippert/frontrunner-af/bootblock-tc.c
similarity index 100%
rename from src/mainboard/lippert/toucan-af/bootblock.c
rename to src/mainboard/lippert/frontrunner-af/bootblock-tc.c
diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree-fr.cb
similarity index 100%
rename from src/mainboard/lippert/frontrunner-af/devicetree.cb
rename to src/mainboard/lippert/frontrunner-af/devicetree-fr.cb
diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree-tc.cb
similarity index 100%
rename from src/mainboard/lippert/toucan-af/devicetree.cb
rename to src/mainboard/lippert/frontrunner-af/devicetree-tc.cb
diff --git a/src/mainboard/lippert/frontrunner-af/dsdt.asl b/src/mainboard/lippert/frontrunner-af/dsdt.asl
index 710a707..4988413 100644
--- a/src/mainboard/lippert/frontrunner-af/dsdt.asl
+++ b/src/mainboard/lippert/frontrunner-af/dsdt.asl
@@ -1186,7 +1186,9 @@
,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */
IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */
+#if CONFIG(BOARD_LIPPERT_FRONTRUNNER_AF)
IO(Decode16, 0x0E00, 0x0E00, 1, 0x80) /* SIO runtime regs */
+#endif
IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
diff --git a/src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard-fr.c
similarity index 100%
rename from src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/mainboard.c
rename to src/mainboard/lippert/frontrunner-af/mainboard-fr.c
diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard-tc.c
similarity index 100%
rename from src/mainboard/lippert/toucan-af/mainboard.c
rename to src/mainboard/lippert/frontrunner-af/mainboard-tc.c
diff --git a/src/mainboard/lippert/frontrunner-af/platform_cfg.h b/src/mainboard/lippert/frontrunner-af/platform_cfg.h
index 7d4f1f9..9f51c40 100644
--- a/src/mainboard/lippert/frontrunner-af/platform_cfg.h
+++ b/src/mainboard/lippert/frontrunner-af/platform_cfg.h
@@ -45,7 +45,11 @@
* Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5
* Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6
*/
+#if CONFIG(BOARD_LIPPERT_FRONTRUNNER_AF)
#define USB_CONFIG 0x3F
+#elif CONFIG(BOARD_LIPPERT_TOUCAN_AF)
+#define USB_CONFIG 0x0F
+#endif
/**
* @def PCI_CLOCK_CTRL
@@ -58,7 +62,11 @@
* PCI SLOT 3 define at BIT3
* PCI SLOT 4 define at BIT4
*/
+#if CONFIG(BOARD_LIPPERT_FRONTRUNNER_AF)
#define PCI_CLOCK_CTRL 0x1F
+#elif CONFIG(BOARD_LIPPERT_TOUCAN_AF)
+#define PCI_CLOCK_CTRL 0x1E
+#endif
/**
* @def SATA_CONTROLLER
@@ -148,12 +156,20 @@
* SDIN2 is define at BIT4 & BIT5
* SDIN3 is define at BIT6 & BIT7
*/
+#if CONFIG(BOARD_LIPPERT_FRONTRUNNER_AF)
#define AZALIA_SDIN_PIN 0x02
+#elif CONFIG(BOARD_LIPPERT_TOUCAN_AF)
+#define AZALIA_SDIN_PIN 0x2A
+#endif
/**
* @def GPP_CONTROLLER
*/
+#if CONFIG(BOARD_LIPPERT_FRONTRUNNER_AF)
#define GPP_CONTROLLER CIMX_OPTION_DISABLED
+#elif CONFIG(BOARD_LIPPERT_TOUCAN_AF)
+#define GPP_CONTROLLER CIMX_OPTION_ENABLED
+#endif
/**
* @def GPP_CFGMODE
diff --git a/src/mainboard/lippert/toucan-af/board_info.txt b/src/mainboard/lippert/frontrunner-af/variants/toucan-af/board_info.txt
similarity index 100%
rename from src/mainboard/lippert/toucan-af/board_info.txt
rename to src/mainboard/lippert/frontrunner-af/variants/toucan-af/board_info.txt
diff --git a/src/mainboard/lippert/toucan-af/Kconfig b/src/mainboard/lippert/toucan-af/Kconfig
deleted file mode 100644
index 102b1d7..0000000
--- a/src/mainboard/lippert/toucan-af/Kconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-if BOARD_LIPPERT_TOUCAN_AF
-
-config BOARD_SPECIFIC_OPTIONS
- def_bool y
- select CPU_AMD_AGESA_FAMILY14
- select NORTHBRIDGE_AMD_AGESA_FAMILY14
- select SOUTHBRIDGE_AMD_CIMX_SB800
- # The Toucan-AF is meant to work on any COM Express Type 6 baseboard.
- # The ADLINK ExpressBase-6 baseboard happens to use this SIO:
- select SUPERIO_WINBOND_W83627DHG
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- # This erases 28 KB and writes 10 KB register dumps to SPI flash on every
- # boot, wasting 3 s and causing wear! Therefore disable S3 for now.
- #select HAVE_ACPI_RESUME
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_4096
- select GFXUMA
-
-config MAINBOARD_DIR
- string
- default "lippert/toucan-af"
-
-config MAINBOARD_PART_NUMBER
- string
- default "Toucan-AF"
-
-config HW_MEM_HOLE_SIZEK
- hex
- default 0x200000
-
-config MAX_CPUS
- int
- default 2
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-config ONBOARD_VGA_IS_PRIMARY
- bool
- default y
-
-config VGA_BIOS
- bool
- default n
-
-#config VGA_BIOS_FILE
-# string "VGA BIOS path and filename"
-# depends on VGA_BIOS
-# default "rom/video/OntarioGenericVbios.bin"
-
-config VGA_BIOS_ID
- string
- default "1002,9802"
-
-config SB800_AHCI_ROM
- bool
- default n
-
-endif # BOARD_LIPPERT_TOUCAN_AF
diff --git a/src/mainboard/lippert/toucan-af/Kconfig.name b/src/mainboard/lippert/toucan-af/Kconfig.name
deleted file mode 100644
index 3481f92..0000000
--- a/src/mainboard/lippert/toucan-af/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_LIPPERT_TOUCAN_AF
- bool "Toucan-AF aka cExpress-GFR (+W83627DHG SIO)"
diff --git a/src/mainboard/lippert/toucan-af/Makefile.inc b/src/mainboard/lippert/toucan-af/Makefile.inc
deleted file mode 100644
index caabc74..0000000
--- a/src/mainboard/lippert/toucan-af/Makefile.inc
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-ifeq ($(CONFIG_AHCI_BIOS),y)
-stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID))
-cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom
-pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE))
-pci$(stripped_ahcibios_id).rom-type := optionrom
-endif
-
-bootblock-y += bootblock.c
-
-romstage-y += buildOpts.c
-romstage-y += BiosCallOuts.c
-romstage-y += OemCustomize.c
-
-ramstage-y += buildOpts.c
-ramstage-y += BiosCallOuts.c
-ramstage-y += OemCustomize.c
-
-# Minimal SEMA watchdog support
-romstage-y += ../frontrunner-af/sema.c
-ramstage-y += ../frontrunner-af/sema.c
diff --git a/src/mainboard/lippert/toucan-af/OptionsIds.h b/src/mainboard/lippert/toucan-af/OptionsIds.h
deleted file mode 100644
index ce3a8a0..0000000
--- a/src/mainboard/lippert/toucan-af/OptionsIds.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/**
- * @file
- *
- * IDS Option File
- *
- * This file is used to switch on/off IDS features.
- *
- */
-#ifndef _OPTION_IDS_H_
-#define _OPTION_IDS_H_
-
-/**
- *
- * This file generates the defaults tables for the Integrated Debug Support
- * Module. The documented build options are imported from a user controlled
- * file for processing. The build options for the Integrated Debug Support
- * Module are listed below:
- *
- * IDSOPT_IDS_ENABLED
- * IDSOPT_ERROR_TRAP_ENABLED
- * IDSOPT_CONTROL_ENABLED
- * IDSOPT_TRACING_ENABLED
- * IDSOPT_PERF_ANALYSIS
- * IDSOPT_ASSERT_ENABLED
- * IDS_DEBUG_PORT
- * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
- *
- **/
-
-#define IDSOPT_IDS_ENABLED TRUE
-//#define IDSOPT_TRACING_ENABLED TRUE
-#define IDSOPT_ASSERT_ENABLED TRUE
-
-//#define IDSOPT_DEBUG_ENABLED FALSE
-//#undef IDSOPT_HOST_SIMNOW
-//#define IDSOPT_HOST_SIMNOW FALSE
-//#undef IDSOPT_HOST_HDT
-//#define IDSOPT_HOST_HDT FALSE
-//#define IDS_DEBUG_PORT 0x80
-
-#endif
diff --git a/src/mainboard/lippert/toucan-af/acpi/routing.asl b/src/mainboard/lippert/toucan-af/acpi/routing.asl
deleted file mode 100644
index 987ba22..0000000
--- a/src/mainboard/lippert/toucan-af/acpi/routing.asl
+++ /dev/null
@@ -1,382 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/* Routing is in System Bus scope */
-Scope(\_SB) {
- Name(PR0, Package(){
- /* NB devices */
- /* Bus 0, Dev 0 - RS780 Host Controller */
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- Package(){0x0001FFFF, 0, INTC, 0 },
- Package(){0x0001FFFF, 1, INTD, 0 },
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, INTC, 0 },
- Package(){0x0002FFFF, 1, INTD, 0 },
- Package(){0x0002FFFF, 2, INTA, 0 },
- Package(){0x0002FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- Package(){0x0003FFFF, 0, INTD, 0 },
- Package(){0x0003FFFF, 1, INTA, 0 },
- Package(){0x0003FFFF, 2, INTB, 0 },
- Package(){0x0003FFFF, 3, INTC, 0 },
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, INTA, 0 },
- Package(){0x0004FFFF, 1, INTB, 0 },
- Package(){0x0004FFFF, 2, INTC, 0 },
- Package(){0x0004FFFF, 3, INTD, 0 },
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- Package(){0x0005FFFF, 0, INTB, 0 },
- Package(){0x0005FFFF, 1, INTC, 0 },
- Package(){0x0005FFFF, 2, INTD, 0 },
- Package(){0x0005FFFF, 3, INTA, 0 },
- /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
- Package(){0x0006FFFF, 0, INTC, 0 },
- Package(){0x0006FFFF, 1, INTD, 0 },
- Package(){0x0006FFFF, 2, INTA, 0 },
- Package(){0x0006FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
- Package(){0x0007FFFF, 0, INTD, 0 },
- Package(){0x0007FFFF, 1, INTA, 0 },
- Package(){0x0007FFFF, 2, INTB, 0 },
- Package(){0x0007FFFF, 3, INTC, 0 },
-
- Package(){0x0009FFFF, 0, INTB, 0 },
- Package(){0x0009FFFF, 1, INTC, 0 },
- Package(){0x0009FFFF, 2, INTD, 0 },
- Package(){0x0009FFFF, 3, INTA, 0 },
-
- Package(){0x000AFFFF, 0, INTC, 0 },
- Package(){0x000AFFFF, 1, INTD, 0 },
- Package(){0x000AFFFF, 2, INTA, 0 },
- Package(){0x000AFFFF, 3, INTB, 0 },
-
- Package(){0x000BFFFF, 0, INTD, 0 },
- Package(){0x000BFFFF, 1, INTA, 0 },
- Package(){0x000BFFFF, 2, INTB, 0 },
- Package(){0x000BFFFF, 3, INTC, 0 },
-
- Package(){0x000CFFFF, 0, INTA, 0 },
- Package(){0x000CFFFF, 1, INTB, 0 },
- Package(){0x000CFFFF, 2, INTC, 0 },
- Package(){0x000CFFFF, 3, INTD, 0 },
-
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
- /* SB devices */
- /* Bus 0, Dev 17 - SATA controller #2 */
- /* Bus 0, Dev 18 - SATA controller #1 */
- Package(){0x0011FFFF, 0, INTD, 0 },
-
- /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
- * EHCI, dev 18, 19 func 2 */
- Package(){0x0012FFFF, 0, INTC, 0 },
- Package(){0x0012FFFF, 1, INTB, 0 },
-
- Package(){0x0013FFFF, 0, INTC, 0 },
- Package(){0x0013FFFF, 1, INTB, 0 },
-
- Package(){0x0016FFFF, 0, INTC, 0 },
- Package(){0x0016FFFF, 1, INTB, 0 },
-
- /* Package(){0x0014FFFF, 1, INTA, 0 }, */
-
- /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
- Package(){0x0014FFFF, 0, INTA, 0 },
- Package(){0x0014FFFF, 1, INTB, 0 },
- Package(){0x0014FFFF, 2, INTC, 0 },
- Package(){0x0014FFFF, 3, INTD, 0 },
-
- Package(){0x0015FFFF, 0, INTA, 0 },
- Package(){0x0015FFFF, 1, INTB, 0 },
- Package(){0x0015FFFF, 2, INTC, 0 },
- Package(){0x0015FFFF, 3, INTD, 0 },
- })
-
- Name(APR0, Package(){
- /* NB devices in APIC mode */
- /* Bus 0, Dev 0 - RS780 Host Controller */
-
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- Package(){0x0001FFFF, 0, 0, 18 },
- Package(){0x0001FFFF, 1, 0, 19 },
-
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, 0, 18 },
- /* Package(){0x0002FFFF, 1, 0, 19 }, */
- /* Package(){0x0002FFFF, 2, 0, 16 }, */
- /* Package(){0x0002FFFF, 3, 0, 17 }, */
-
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- Package(){0x0003FFFF, 0, 0, 19 },
- Package(){0x0003FFFF, 1, 0, 16 },
- Package(){0x0003FFFF, 2, 0, 17 },
- Package(){0x0003FFFF, 3, 0, 18 },
-
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, 0, 16 },
- Package(){0x0004FFFF, 1, 0, 17 },
- Package(){0x0004FFFF, 2, 0, 18 },
- Package(){0x0004FFFF, 3, 0, 19 },
-
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- Package(){0x0005FFFF, 0, 0, 17 },
- Package(){0x0005FFFF, 1, 0, 18 },
- Package(){0x0005FFFF, 2, 0, 19 },
- Package(){0x0005FFFF, 3, 0, 16 },
-
- /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
- Package(){0x0006FFFF, 0, 0, 18 },
- Package(){0x0006FFFF, 1, 0, 19 },
- Package(){0x0006FFFF, 2, 0, 16 },
- Package(){0x0006FFFF, 3, 0, 17 },
-
- /* Bus 0, Dev 7 - PCIe Bridge for network card */
- Package(){0x0007FFFF, 0, 0, 19 },
- Package(){0x0007FFFF, 1, 0, 16 },
- Package(){0x0007FFFF, 2, 0, 17 },
- Package(){0x0007FFFF, 3, 0, 18 },
-
- /* Bus 0, Dev 9 - PCIe Bridge for network card */
- Package(){0x0009FFFF, 0, 0, 17 },
- Package(){0x0009FFFF, 1, 0, 16 },
- Package(){0x0009FFFF, 2, 0, 17 },
- Package(){0x0009FFFF, 3, 0, 18 },
- /* Bus 0, Dev A - PCIe Bridge for network card */
- Package(){0x000AFFFF, 0, 0, 18 },
- Package(){0x000AFFFF, 1, 0, 16 },
- Package(){0x000AFFFF, 2, 0, 17 },
- Package(){0x000AFFFF, 3, 0, 18 },
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
- /* SB devices in APIC mode */
- /* Bus 0, Dev 17 - SATA controller #2 */
- /* Bus 0, Dev 18 - SATA controller #1 */
- Package(){0x0011FFFF, 0, 0, 19 },
-
- /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
- * EHCI, dev 18, 19 func 2 */
- Package(){0x0012FFFF, 0, 0, 18 },
- Package(){0x0012FFFF, 1, 0, 17 },
- /* Package(){0x0012FFFF, 2, 0, 18 }, */
-
- Package(){0x0013FFFF, 0, 0, 18 },
- Package(){0x0013FFFF, 1, 0, 17 },
- /* Package(){0x0013FFFF, 2, 0, 16 }, */
-
- /* Package(){0x00140000, 0, 0, 16 }, */
-
- Package(){0x0016FFFF, 0, 0, 18 },
- Package(){0x0016FFFF, 1, 0, 17 },
-
- /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
- Package(){0x0014FFFF, 0, 0, 16 },
- Package(){0x0014FFFF, 1, 0, 17 },
- Package(){0x0014FFFF, 2, 0, 18 },
- Package(){0x0014FFFF, 3, 0, 19 },
- /* Package(){0x00140004, 2, 0, 18 }, */
- /* Package(){0x00140004, 3, 0, 19 }, */
- /* Package(){0x00140005, 1, 0, 17 }, */
- /* Package(){0x00140006, 1, 0, 17 }, */
-
- /* TODO: pcie */
- Package(){0x0015FFFF, 0, 0, 16 },
- Package(){0x0015FFFF, 1, 0, 17 },
- Package(){0x0015FFFF, 2, 0, 18 },
- Package(){0x0015FFFF, 3, 0, 19 },
- })
-
- Name(PR1, Package(){
- /* Internal graphics - RS780 VGA, Bus1, Dev5 */
- Package(){0x0005FFFF, 0, INTA, 0 },
- Package(){0x0005FFFF, 1, INTB, 0 },
- Package(){0x0005FFFF, 2, INTC, 0 },
- Package(){0x0005FFFF, 3, INTD, 0 },
- })
- Name(APR1, Package(){
- /* Internal graphics - RS780 VGA, Bus1, Dev5 */
- Package(){0x0005FFFF, 0, 0, 18 },
- Package(){0x0005FFFF, 1, 0, 19 },
- /* Package(){0x0005FFFF, 2, 0, 20 }, */
- /* Package(){0x0005FFFF, 3, 0, 17 }, */
- })
-
- Name(PS2, Package(){
- /* The external GFX - Hooked to PCIe slot 2 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APS2, Package(){
- /* The external GFX - Hooked to PCIe slot 2 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PS4, Package(){
- /* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
- })
- Name(APS4, Package(){
- /* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, 0, 16 },
- Package(){0x0000FFFF, 1, 0, 17 },
- Package(){0x0000FFFF, 2, 0, 18 },
- Package(){0x0000FFFF, 3, 0, 19 },
- })
-
- Name(PS5, Package(){
- /* PCIe slot - Hooked to PCIe slot 5 */
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
- })
- Name(APS5, Package(){
- /* PCIe slot - Hooked to PCIe slot 5 */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PS6, Package(){
- /* PCIe slot - Hooked to PCIe slot 6 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APS6, Package(){
- /* PCIe slot - Hooked to PCIe slot 6 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
- Package(){0x0000FFFF, 0, 0, 19 },
- Package(){0x0000FFFF, 1, 0, 16 },
- Package(){0x0000FFFF, 2, 0, 17 },
- Package(){0x0000FFFF, 3, 0, 18 },
- })
-
- Name(PS9, Package(){
- /* PCIe slot - Hooked to PCIe slot 9 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APS9, Package(){
- /* PCIe slot - Hooked to PCIe slot 9 */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PSa, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APSa, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PE0, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
- })
- Name(APE0, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 16 },
- Package(){0x0000FFFF, 1, 0, 17 },
- Package(){0x0000FFFF, 2, 0, 18 },
- Package(){0x0000FFFF, 3, 0, 19 },
- })
-
- Name(PE1, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
- })
- Name(APE1, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PE2, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APE2, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PE3, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APE3, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 19 },
- Package(){0x0000FFFF, 1, 0, 16 },
- Package(){0x0000FFFF, 2, 0, 17 },
- Package(){0x0000FFFF, 3, 0, 18 },
- })
-
- Name(PCIB, Package(){
- /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
- Package(){0x0003FFFF, 0, 0, 0x14 },
- Package(){0x0003FFFF, 1, 0, 0x15 },
- Package(){0x0003FFFF, 2, 0, 0x16 },
- Package(){0x0003FFFF, 3, 0, 0x17 },
- Package(){0x0004FFFF, 0, 0, 0x15 },
- Package(){0x0004FFFF, 1, 0, 0x16 },
- Package(){0x0004FFFF, 2, 0, 0x17 },
- Package(){0x0004FFFF, 3, 0, 0x14 },
- Package(){0x0005FFFF, 0, 0, 0x16 },
- Package(){0x0005FFFF, 1, 0, 0x17 },
- Package(){0x0005FFFF, 2, 0, 0x14 },
- Package(){0x0005FFFF, 3, 0, 0x15 },
- })
-}
diff --git a/src/mainboard/lippert/toucan-af/acpi/sata.asl b/src/mainboard/lippert/toucan-af/acpi/sata.asl
deleted file mode 100644
index 7f305fb..0000000
--- a/src/mainboard/lippert/toucan-af/acpi/sata.asl
+++ /dev/null
@@ -1,132 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/* simple name description */
-
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(SATA) {
- Name(_ADR, 0x00110000)
- #include "sata.asl"
- }
- }
-}
-*/
-
-Name(STTM, Buffer(20) {
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x1f, 0x00, 0x00, 0x00
-})
-
-/* Start by clearing the PhyRdyChg bits */
-Method(_INI) {
- \_GPE._L1F()
-}
-
-Device(PMRY)
-{
- Name(_ADR, 0)
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(PMST) {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P0IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- }/* end of PMST */
-
- Device(PSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P1IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of PSLA */
-} /* end of PMRY */
-
-
-Device(SEDY)
-{
- Name(_ADR, 1) /* IDE Scondary Channel */
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(SMST)
- {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P2IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SMST */
-
- Device(SSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P3IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SSLA */
-} /* end of SEDY */
-
-/* SATA Hot Plug Support */
-Scope(\_GPE) {
- Method(_L1F,0x0,NotSerialized) {
- if (\_SB.P0PR) {
- if (LGreater(\_SB.P0IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P0PR)
- }
-
- if (\_SB.P1PR) {
- if (LGreater(\_SB.P1IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P1PR)
- }
-
- if (\_SB.P2PR) {
- if (LGreater(\_SB.P2IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P2PR)
- }
-
- if (\_SB.P3PR) {
- if (LGreater(\_SB.P3IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P3PR)
- }
- }
-}
diff --git a/src/mainboard/lippert/toucan-af/acpi/superio.asl b/src/mainboard/lippert/toucan-af/acpi/superio.asl
deleted file mode 100644
index 490d8c4..0000000
--- a/src/mainboard/lippert/toucan-af/acpi/superio.asl
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/*
- * SuperI/O devices
- */
-
-/* PS/2 Keyboard */
-Device(KBC) {
- Name(_HID, EISAID("PNP0303"))
- Name(_CRS, ResourceTemplate() {
- IO(Decode16, 0x0060, 0x0060, 1, 1)
- IO(Decode16, 0x0064, 0x0064, 1, 1)
- IRQNoFlags(){1}
- })
-}
-
-/* PS/2 Mouse */
-Device(PS2M) {
- Name(_HID, EISAID("PNP0F13"))
- Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){12}
- })
-}
diff --git a/src/mainboard/lippert/toucan-af/acpi/usb.asl b/src/mainboard/lippert/toucan-af/acpi/usb.asl
deleted file mode 100644
index ca9e002..0000000
--- a/src/mainboard/lippert/toucan-af/acpi/usb.asl
+++ /dev/null
@@ -1,136 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-Method(UCOC, 0) {
- Sleep(20)
- Store(0x13,CMTI)
- Store(0,GPSL)
-}
-
-/* USB Port 0 overcurrent uses Gpm 0 */
-If(LLessEqual(UOM0,9)) {
- Scope (\_GPE) {
- Method (_L13) {
- UCOC()
- if(LEqual(GPB0,PLC0)) {
- Not(PLC0,PLC0)
- Store(PLC0, \_SB.PT0D)
- }
- }
- }
-}
-
-/* USB Port 1 overcurrent uses Gpm 1 */
-If (LLessEqual(UOM1,9)) {
- Scope (\_GPE) {
- Method (_L14) {
- UCOC()
- if (LEqual(GPB1,PLC1)) {
- Not(PLC1,PLC1)
- Store(PLC1, \_SB.PT1D)
- }
- }
- }
-}
-
-/* USB Port 2 overcurrent uses Gpm 2 */
-If (LLessEqual(UOM2,9)) {
- Scope (\_GPE) {
- Method (_L15) {
- UCOC()
- if (LEqual(GPB2,PLC2)) {
- Not(PLC2,PLC2)
- Store(PLC2, \_SB.PT2D)
- }
- }
- }
-}
-
-/* USB Port 3 overcurrent uses Gpm 3 */
-If (LLessEqual(UOM3,9)) {
- Scope (\_GPE) {
- Method (_L16) {
- UCOC()
- if (LEqual(GPB3,PLC3)) {
- Not(PLC3,PLC3)
- Store(PLC3, \_SB.PT3D)
- }
- }
- }
-}
-
-/* USB Port 4 overcurrent uses Gpm 4 */
-If (LLessEqual(UOM4,9)) {
- Scope (\_GPE) {
- Method (_L19) {
- UCOC()
- if (LEqual(GPB4,PLC4)) {
- Not(PLC4,PLC4)
- Store(PLC4, \_SB.PT4D)
- }
- }
- }
-}
-
-/* USB Port 5 overcurrent uses Gpm 5 */
-If (LLessEqual(UOM5,9)) {
- Scope (\_GPE) {
- Method (_L1A) {
- UCOC()
- if (LEqual(GPB5,PLC5)) {
- Not(PLC5,PLC5)
- Store(PLC5, \_SB.PT5D)
- }
- }
- }
-}
-
-/* USB Port 6 overcurrent uses Gpm 6 */
-If (LLessEqual(UOM6,9)) {
- Scope (\_GPE) {
- /* Method (_L1C) { */
- Method (_L06) {
- UCOC()
- if (LEqual(GPB6,PLC6)) {
- Not(PLC6,PLC6)
- Store(PLC6, \_SB.PT6D)
- }
- }
- }
-}
-
-/* USB Port 7 overcurrent uses Gpm 7 */
-If (LLessEqual(UOM7,9)) {
- Scope (\_GPE) {
- /* Method (_L1D) { */
- Method (_L07) {
- UCOC()
- if (LEqual(GPB7,PLC7)) {
- Not(PLC7,PLC7)
- Store(PLC7, \_SB.PT7D)
- }
- }
- }
-}
-
-/* USB Port 8 overcurrent uses Gpm 8 */
-If (LLessEqual(UOM8,9)) {
- Scope (\_GPE) {
- Method (_L17) {
- if (LEqual(G8IS,PLC8)) {
- Not(PLC8,PLC8)
- Store(PLC8, \_SB.PT8D)
- }
- }
- }
-}
-
-/* USB Port 9 overcurrent uses Gpm 9 */
-If (LLessEqual(UOM9,9)) {
- Scope (\_GPE) {
- Method (_L0E) {
- if (LEqual(G9IS,0)) {
- Store(1,\_SB.PT9D)
- }
- }
- }
-}
diff --git a/src/mainboard/lippert/toucan-af/acpi_tables.c b/src/mainboard/lippert/toucan-af/acpi_tables.c
deleted file mode 100644
index f75f823..0000000
--- a/src/mainboard/lippert/toucan-af/acpi_tables.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <acpi/acpi.h>
-#include <arch/ioapic.h>
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
- /* create all subtables for processors */
- current = acpi_create_madt_lapics(current);
-
- /* Write SB800 IOAPIC, only one */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
- CONFIG_MAX_CPUS, IO_APIC_ADDR, 0);
-
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 0);
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9, 0xF);
-
- /* 0: mean bus 0--->ISA */
- /* 0: PIC 0 */
- /* 2: APIC 2 */
- /* 5 mean: 0101 --> Edge-triggered, Active high */
-
- /* create all subtables for processors */
- /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
- /* 1: LINT1 connect to NMI */
-
- return current;
-}
diff --git a/src/mainboard/lippert/toucan-af/buildOpts.c b/src/mainboard/lippert/toucan-af/buildOpts.c
deleted file mode 100644
index d8d46d4..0000000
--- a/src/mainboard/lippert/toucan-af/buildOpts.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/* Select the CPU family */
-#define INSTALL_FAMILY_14_SUPPORT TRUE
-
-/* Select the CPU socket type */
-#define INSTALL_FT1_SOCKET_SUPPORT TRUE
-
-/* Agesa optional capabilities selection */
-#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE
-#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
-#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE
-#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
-#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE
-#define BLDOPT_REMOVE_WHEA FALSE
-
-#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1
-
-#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
-#define BLDCFG_CFG_GNB_HD_AUDIO FALSE
-#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
-#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE
-#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE
-
-/* Agesa configuration values selection */
-#include <AGESA.h>
-
-/* Include the files that instantiate the configuration definitions */
-#include "cpuRegisters.h"
-#include "cpuFamRegisters.h"
-#include "cpuFamilyTranslation.h"
-#include "AdvancedApi.h"
-#include "heapManager.h"
-#include "CreateStruct.h"
-#include "cpuFeatures.h"
-#include "Table.h"
-#include "cpuEarlyInit.h"
-#include "cpuLateInit.h"
-#include "GnbInterface.h"
-
-/* Instantiate all solution relevant data */
-#include <PlatformInstall.h>
diff --git a/src/mainboard/lippert/toucan-af/cmos.layout b/src/mainboard/lippert/toucan-af/cmos.layout
deleted file mode 100644
index beedaa7..0000000
--- a/src/mainboard/lippert/toucan-af/cmos.layout
+++ /dev/null
@@ -1,57 +0,0 @@
-#*****************************************************************************
-# SPDX-License-Identifier: GPL-2.0-only
-
-#*****************************************************************************
-
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 400Mhz
-8 1 333Mhz
-8 2 266Mhz
-8 3 200Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/lippert/toucan-af/dsdt.asl b/src/mainboard/lippert/toucan-af/dsdt.asl
deleted file mode 100644
index 17837c4..0000000
--- a/src/mainboard/lippert/toucan-af/dsdt.asl
+++ /dev/null
@@ -1,1258 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/* DefinitionBlock Statement */
-#include <acpi/acpi.h>
-DefinitionBlock (
- "DSDT.AML", /* Output filename */
- "DSDT", /* Signature */
- 0x02, /* DSDT Revision, needs to be 2 for 64bit */
- OEM_ID,
- ACPI_TABLE_CREATOR,
- 0x00010001 /* OEM Revision */
- )
-{ /* Start of ASL file */
-
- /* Data to be patched by the BIOS during POST */
- /* FIXME the patching is not done yet! */
- /* Memory related values */
- Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
- Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
- Name(PBLN, 0x0) /* Length of BIOS area */
-
- Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
- Name(HPBA, 0xFED00000) /* Base address of HPET table */
-
- /* USB overcurrent mapping pins. */
- Name(UOM0, 0)
- Name(UOM1, 2)
- Name(UOM2, 0)
- Name(UOM3, 7)
- Name(UOM4, 2)
- Name(UOM5, 2)
- Name(UOM6, 6)
- Name(UOM7, 2)
- Name(UOM8, 6)
- Name(UOM9, 6)
-
- /* Some global data */
- Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
- Name(OSV, Ones) /* Assume nothing */
- Name(PMOD, One) /* Assume APIC */
-
- /*
- * Processor Object
- *
- */
- Scope (\_SB) { /* define processor scope */
- Device (C000) {
- Name (_HID, "ACPI0007")
- Name (_UID, 0)
- }
- Device (C001) {
- Name (_HID, "ACPI0007")
- Name (_UID, 1)
- }
- Device (C002) {
- Name (_HID, "ACPI0007")
- Name (_UID, 2)
- }
- Device (C003) {
- Name (_HID, "ACPI0007")
- Name (_UID, 3)
- }
- } /* End _SB scope */
-
- /* PIC IRQ mapping registers, C00h-C01h. */
- OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
- Field(PRQM, ByteAcc, NoLock, Preserve) {
- PRQI, 0x00000008,
- PRQD, 0x00000008, /* Offset: 1h */
- }
- IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
- PIRA, 0x00000008, /* Index 0 */
- PIRB, 0x00000008, /* Index 1 */
- PIRC, 0x00000008, /* Index 2 */
- PIRD, 0x00000008, /* Index 3 */
- PIRE, 0x00000008, /* Index 4 */
- PIRF, 0x00000008, /* Index 5 */
- PIRG, 0x00000008, /* Index 6 */
- PIRH, 0x00000008, /* Index 7 */
- }
-
- /* PCI Error control register */
- OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
- Field(PERC, ByteAcc, NoLock, Preserve) {
- SENS, 0x00000001,
- PENS, 0x00000001,
- SENE, 0x00000001,
- PENE, 0x00000001,
- }
-
- /* Client Management index/data registers */
- OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
- Field(CMT, ByteAcc, NoLock, Preserve) {
- CMTI, 8,
- /* Client Management Data register */
- G64E, 1,
- G64O, 1,
- G32O, 2,
- , 2,
- GPSL, 2,
- }
-
- /* GPM Port register */
- OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
- Field(GPT, ByteAcc, NoLock, Preserve) {
- GPB0,1,
- GPB1,1,
- GPB2,1,
- GPB3,1,
- GPB4,1,
- GPB5,1,
- GPB6,1,
- GPB7,1,
- }
-
- /* Flash ROM program enable register */
- OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
- Field(FRE, ByteAcc, NoLock, Preserve) {
- , 0x00000006,
- FLRE, 0x00000001,
- }
-
- /* PM2 index/data registers */
- OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
- Field(PM2R, ByteAcc, NoLock, Preserve) {
- PM2I, 0x00000008,
- PM2D, 0x00000008,
- }
-
- /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */
- OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
- Field(PIOR, ByteAcc, NoLock, Preserve) {
- PIOI, 0x00000008,
- PIOD, 0x00000008,
- }
- IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
- Offset(0x00), /* MiscControl */
- , 1,
- T1EE, 1,
- T2EE, 1,
- Offset(0x01), /* MiscStatus */
- , 1,
- T1E, 1,
- T2E, 1,
- Offset(0x04), /* SmiWakeUpEventEnable3 */
- , 7,
- SSEN, 1,
- Offset(0x07), /* SmiWakeUpEventStatus3 */
- , 7,
- CSSM, 1,
- Offset(0x10), /* AcpiEnable */
- , 6,
- PWDE, 1,
- Offset(0x1C), /* ProgramIoEnable */
- , 3,
- MKME, 1,
- IO3E, 1,
- IO2E, 1,
- IO1E, 1,
- IO0E, 1,
- Offset(0x1D), /* IOMonitorStatus */
- , 3,
- MKMS, 1,
- IO3S, 1,
- IO2S, 1,
- IO1S, 1,
- IO0S,1,
- Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */
- APEB, 16,
- Offset(0x36), /* GEvtLevelConfig */
- , 6,
- ELC6, 1,
- ELC7, 1,
- Offset(0x37), /* GPMLevelConfig0 */
- , 3,
- PLC0, 1,
- PLC1, 1,
- PLC2, 1,
- PLC3, 1,
- PLC8, 1,
- Offset(0x38), /* GPMLevelConfig1 */
- , 1,
- PLC4, 1,
- PLC5, 1,
- , 1,
- PLC6, 1,
- PLC7, 1,
- Offset(0x3B), /* PMEStatus1 */
- GP0S, 1,
- GM4S, 1,
- GM5S, 1,
- APS, 1,
- GM6S, 1,
- GM7S, 1,
- GP2S, 1,
- STSS, 1,
- Offset(0x55), /* SoftPciRst */
- SPRE, 1,
- , 1,
- , 1,
- PNAT, 1,
- PWMK, 1,
- PWNS, 1,
-
- Offset(0x65), /* UsbPMControl */
- , 4,
- URRE, 1,
- Offset(0x68), /* MiscEnable68 */
- , 3,
- TMTE, 1,
- , 1,
- Offset(0x92), /* GEVENTIN */
- , 7,
- E7IS, 1,
- Offset(0x96), /* GPM98IN */
- G8IS, 1,
- G9IS, 1,
- Offset(0x9A), /* EnhanceControl */
- ,7,
- HPDE, 1,
- Offset(0xA8), /* PIO7654Enable */
- IO4E, 1,
- IO5E, 1,
- IO6E, 1,
- IO7E, 1,
- Offset(0xA9), /* PIO7654Status */
- IO4S, 1,
- IO5S, 1,
- IO6S, 1,
- IO7S, 1,
- }
-
- /* PM1 Event Block
- * First word is PM1_Status, Second word is PM1_Enable
- */
- OperationRegion(P1EB, SystemIO, APEB, 0x04)
- Field(P1EB, ByteAcc, NoLock, Preserve) {
- TMST, 1,
- , 3,
- BMST, 1,
- GBST, 1,
- Offset(0x01),
- PBST, 1,
- , 1,
- RTST, 1,
- , 3,
- PWST, 1,
- SPWS, 1,
- Offset(0x02),
- TMEN, 1,
- , 4,
- GBEN, 1,
- Offset(0x03),
- PBEN, 1,
- , 1,
- RTEN, 1,
- , 3,
- PWDA, 1,
- }
-
- Scope(\_SB) {
- /* PCIe Configuration Space for 16 busses */
- OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
- Field(PCFG, ByteAcc, NoLock, Preserve) {
- /* Byte offsets are computed using the following technique:
- * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
- * The 8 comes from 8 functions per device, and 4096 bytes per function config space
- */
- Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
- STB5, 32,
- Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
- PT0D, 1,
- PT1D, 1,
- PT2D, 1,
- PT3D, 1,
- PT4D, 1,
- PT5D, 1,
- PT6D, 1,
- PT7D, 1,
- PT8D, 1,
- PT9D, 1,
- Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */
- SBIE, 1,
- SBME, 1,
- Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */
- SBRI, 8,
- Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */
- SBB1, 32,
- Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */
- ,14,
- P92E, 1, /* Port92 decode enable */
- }
-
- OperationRegion(SB5, SystemMemory, STB5, 0x1000)
- Field(SB5, AnyAcc, NoLock, Preserve){
- /* Port 0 */
- Offset(0x120), /* Port 0 Task file status */
- P0ER, 1,
- , 2,
- P0DQ, 1,
- , 3,
- P0BY, 1,
- Offset(0x128), /* Port 0 Serial ATA status */
- P0DD, 4,
- , 4,
- P0IS, 4,
- Offset(0x12C), /* Port 0 Serial ATA control */
- P0DI, 4,
- Offset(0x130), /* Port 0 Serial ATA error */
- , 16,
- P0PR, 1,
-
- /* Port 1 */
- offset(0x1A0), /* Port 1 Task file status */
- P1ER, 1,
- , 2,
- P1DQ, 1,
- , 3,
- P1BY, 1,
- Offset(0x1A8), /* Port 1 Serial ATA status */
- P1DD, 4,
- , 4,
- P1IS, 4,
- Offset(0x1AC), /* Port 1 Serial ATA control */
- P1DI, 4,
- Offset(0x1B0), /* Port 1 Serial ATA error */
- , 16,
- P1PR, 1,
-
- /* Port 2 */
- Offset(0x220), /* Port 2 Task file status */
- P2ER, 1,
- , 2,
- P2DQ, 1,
- , 3,
- P2BY, 1,
- Offset(0x228), /* Port 2 Serial ATA status */
- P2DD, 4,
- , 4,
- P2IS, 4,
- Offset(0x22C), /* Port 2 Serial ATA control */
- P2DI, 4,
- Offset(0x230), /* Port 2 Serial ATA error */
- , 16,
- P2PR, 1,
-
- /* Port 3 */
- Offset(0x2A0), /* Port 3 Task file status */
- P3ER, 1,
- , 2,
- P3DQ, 1,
- , 3,
- P3BY, 1,
- Offset(0x2A8), /* Port 3 Serial ATA status */
- P3DD, 4,
- , 4,
- P3IS, 4,
- Offset(0x2AC), /* Port 3 Serial ATA control */
- P3DI, 4,
- Offset(0x2B0), /* Port 3 Serial ATA error */
- , 16,
- P3PR, 1,
- }
- }
-
-
- #include "acpi/routing.asl"
-
- Scope(\_SB) {
-
- Method(OSFL, 0){
-
- if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */
-
- if(CondRefOf(\_OSI))
- {
- Store(1, OSVR) /* Assume some form of XP */
- if (\_OSI("Windows 2006")) /* Vista */
- {
- Store(2, OSVR)
- }
- } else {
- If(WCMP(\_OS,"Linux")) {
- Store(3, OSVR) /* Linux */
- } Else {
- Store(4, OSVR) /* Gotta be WinCE */
- }
- }
- Return(OSVR)
- }
-
- Method(_PIC, 0x01, NotSerialized)
- {
- If (Arg0)
- {
- \_SB.CIRQ()
- }
- Store(Arg0, PMOD)
- }
- Method(CIRQ, 0x00, NotSerialized){
- Store(0, PIRA)
- Store(0, PIRB)
- Store(0, PIRC)
- Store(0, PIRD)
- Store(0, PIRE)
- Store(0, PIRF)
- Store(0, PIRG)
- Store(0, PIRH)
- }
-
- Name(IRQB, ResourceTemplate(){
- IRQ(Level,ActiveLow,Shared){15}
- })
-
- Name(IRQP, ResourceTemplate(){
- IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
- })
-
- Name(PITF, ResourceTemplate(){
- IRQ(Level,ActiveLow,Exclusive){9}
- })
-
- Device(INTA) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 1)
-
- Method(_STA, 0) {
- if (PIRA) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTA._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRA)
- } /* End Method(_SB.INTA._DIS) */
-
- Method(_PRS ,0) {
- Return(IRQP)
- } /* Method(_SB.INTA._PRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRA, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTA._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRA)
- } /* End Method(_SB.INTA._SRS) */
- } /* End Device(INTA) */
-
- Device(INTB) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 2)
-
- Method(_STA, 0) {
- if (PIRB) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTB._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRB)
- } /* End Method(_SB.INTB._DIS) */
-
- Method(_PRS ,0) {
- Return(IRQP)
- } /* Method(_SB.INTB._PRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRB, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTB._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRB)
- } /* End Method(_SB.INTB._SRS) */
- } /* End Device(INTB) */
-
- Device(INTC) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 3)
-
- Method(_STA, 0) {
- if (PIRC) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTC._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRC)
- } /* End Method(_SB.INTC._DIS) */
-
- Method(_PRS ,0) {
- Return(IRQP)
- } /* Method(_SB.INTC._PRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRC, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTC._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRC)
- } /* End Method(_SB.INTC._SRS) */
- } /* End Device(INTC) */
-
- Device(INTD) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 4)
-
- Method(_STA, 0) {
- if (PIRD) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTD._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRD)
- } /* End Method(_SB.INTD._DIS) */
-
- Method(_PRS ,0) {
- Return(IRQP)
- } /* Method(_SB.INTD._PRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRD, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTD._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRD)
- } /* End Method(_SB.INTD._SRS) */
- } /* End Device(INTD) */
-
- Device(INTE) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 5)
-
- Method(_STA, 0) {
- if (PIRE) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTE._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRE)
- } /* End Method(_SB.INTE._DIS) */
-
- Method(_PRS ,0) {
- Return(IRQP)
- } /* Method(_SB.INTE._PRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRE, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTE._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRE)
- } /* End Method(_SB.INTE._SRS) */
- } /* End Device(INTE) */
-
- Device(INTF) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 6)
-
- Method(_STA, 0) {
- if (PIRF) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTF._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRF)
- } /* End Method(_SB.INTF._DIS) */
-
- Method(_PRS ,0) {
- Return(PITF)
- } /* Method(_SB.INTF._PRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRF, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTF._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRF)
- } /* End Method(_SB.INTF._SRS) */
- } /* End Device(INTF) */
-
- Device(INTG) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 7)
-
- Method(_STA, 0) {
- if (PIRG) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTG._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRG)
- } /* End Method(_SB.INTG._DIS) */
-
- Method(_PRS ,0) {
- Return(IRQP)
- } /* Method(_SB.INTG._CRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRG, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTG._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRG)
- } /* End Method(_SB.INTG._SRS) */
- } /* End Device(INTG) */
-
- Device(INTH) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 8)
-
- Method(_STA, 0) {
- if (PIRH) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTH._STA) */
-
- Method(_DIS ,0) {
- Store(0, PIRH)
- } /* End Method(_SB.INTH._DIS) */
-
- Method(_PRS ,0) {
- Return(IRQP)
- } /* Method(_SB.INTH._CRS) */
-
- Method(_CRS ,0) {
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRH, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTH._CRS) */
-
- Method(_SRS, 1) {
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRH)
- } /* End Method(_SB.INTH._SRS) */
- } /* End Device(INTH) */
-
- } /* End Scope(_SB) */
-
- /* Contains the supported sleep states for this chipset */
- #include <southbridge/amd/common/acpi/sleepstates.asl>
-
- /* Wake status package */
- Name(WKST,Package(){Zero, Zero})
-
- /*
- * \_PTS - Prepare to Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2, etc
- *
- * Exit:
- * -none-
- *
- * The _PTS control method is executed at the beginning of the sleep process
- * for S1-S5. The sleeping value is passed to the _PTS control method. This
- * control method may be executed a relatively long time before entering the
- * sleep state and the OS may abort the operation without notification to
- * the ACPI driver. This method cannot modify the configuration or power
- * state of any device in the system.
- */
- Method(\_PTS, 1) {
-
- /* Don't allow PCIRST# to reset USB */
- if (LEqual(Arg0,3)){
- Store(0,URRE)
- }
-
- /* Clear wake status structure. */
- Store(0, Index(WKST,0))
- Store(0, Index(WKST,1))
- } /* End Method(\_PTS) */
-
- /*
- * \_BFS OEM Back From Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * -none-
- */
- Method(\_BFS, 1) {
- }
-
- /*
- * \_WAK System Wake method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * Return package of 2 DWords
- * Dword 1 - Status
- * 0x00000000 wake succeeded
- * 0x00000001 Wake was signaled but failed due to lack of power
- * 0x00000002 Wake was signaled but failed due to thermal condition
- * Dword 2 - Power Supply state
- * if non-zero the effective S-state the power supply entered
- */
- Method(\_WAK, 1) {
-
- /* Re-enable HPET */
- Store(1,HPDE)
-
- /* Restore PCIRST# so it resets USB */
- if (LEqual(Arg0,3)){
- Store(1,URRE)
- }
-
- /* Arbitrarily clear PciExpWakeStatus */
- Store(PWST, Local1)
- Store(Local1, PWST)
-
- Return(WKST)
- } /* End Method(\_WAK) */
-
- Scope(\_GPE) { /* Start Scope GPE */
-
- /* General event 3 */
- Method(_L03) {
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* Legacy PM event */
- Method(_L08) {
- }
-
- /* Temp warning (TWarn) event */
- Method(_L09) {
- }
-
- /* USB controller PME# */
- Method(_L0B) {
- Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* ExtEvent0 SCI event */
- Method(_L10) {
- }
-
- /* ExtEvent1 SCI event */
- Method(_L11) {
- }
-
- /* GPIO0 or GEvent8 event */
- Method(_L18) {
- Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* Azalia SCI event */
- Method(_L1B) {
- Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
- } /* End Scope GPE */
-
- #include "acpi/usb.asl"
-
- /* System Bus */
- Scope(\_SB) { /* Start \_SB scope */
- #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */
-
- /* _SB.PCI0 */
- /* Note: Only need HID on Primary Bus */
- Device(PCI0) {
- External (TOM1)
- External (TOM2)
- Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */
- Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */
-
- /* Operating System Capabilities Method */
- Method (_OSC, 4)
- {
- /* Check for PCI/PCI-X/PCIe GUID */
- If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
- {
- /* Let OS control everything */
- Return (Arg3)
- }
- Else
- {
- /* Unrecognized UUID, so set bit 2 of Arg3 to 1 */
- CreateDWordField (Arg3, 0, CDW1)
- Or (CDW1, 4, CDW1)
- Return (Arg3)
- }
- } /* End _OSC */
-
- Method(_BBN, 0) { /* Bus number = 0 */
- Return(0)
- }
- Method(_STA, 0) {
- Return(0x0B) /* Status is visible */
- }
-
- Method(_PRT,0) {
- If(PMOD){ Return(APR0) } /* APIC mode */
- Return (PR0) /* PIC Mode */
- } /* end _PRT */
-
- /* Describe the Northbridge devices */
- Device(AMRT) {
- Name(_ADR, 0x00000000)
- } /* end AMRT */
-
- /* The internal GFX bridge */
- Device(AGPB) {
- Name(_ADR, 0x00010000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- Return (APR1)
- }
- } /* end AGPB */
-
- /* The external GFX bridge */
- Device(PBR2) {
- Name(_ADR, 0x00020000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS2) } /* APIC mode */
- Return (PS2) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR2 */
-
- /* Dev3 is also an external GFX bridge, not used in Herring */
-
- Device(PBR4) {
- Name(_ADR, 0x00040000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS4) } /* APIC mode */
- Return (PS4) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR4 */
-
- Device(PBR5) {
- Name(_ADR, 0x00050000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS5) } /* APIC mode */
- Return (PS5) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR5 */
-
- Device(PBR6) {
- Name(_ADR, 0x00060000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS6) } /* APIC mode */
- Return (PS6) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR6 */
-
- /* The onboard EtherNet chip */
- Device(PBR7) {
- Name(_ADR, 0x00070000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS7) } /* APIC mode */
- Return (PS7) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR7 */
-
- /* GPP */
- Device(PBR9) {
- Name(_ADR, 0x00090000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS9) } /* APIC mode */
- Return (PS9) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR9 */
-
- Device(PBRa) {
- Name(_ADR, 0x000A0000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APSa) } /* APIC mode */
- Return (PSa) /* PIC Mode */
- } /* end _PRT */
- } /* end PBRa */
-
- Device(PE20) {
- Name(_ADR, 0x00150000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE0) } /* APIC mode */
- Return (PE0) /* PIC Mode */
- } /* end _PRT */
- } /* end PE20 */
- Device(PE21) {
- Name(_ADR, 0x00150001)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE1) } /* APIC mode */
- Return (PE1) /* PIC Mode */
- } /* end _PRT */
- } /* end PE21 */
- Device(PE22) {
- Name(_ADR, 0x00150002)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE2) } /* APIC mode */
- Return (APE2) /* PIC Mode */
- } /* end _PRT */
- } /* end PE22 */
- Device(PE23) {
- Name(_ADR, 0x00150003)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE3) } /* APIC mode */
- Return (PE3) /* PIC Mode */
- } /* end _PRT */
- } /* end PE23 */
-
- /* PCI slot 1, 2, 3 */
- Device(PIBR) {
- Name(_ADR, 0x00140004)
- Name(_PRW, Package() {0x18, 4})
-
- Method(_PRT, 0) {
- Return (PCIB)
- }
- }
-
- /* Describe the Southbridge devices */
- Device(STCR) {
- Name(_ADR, 0x00110000)
- #include "acpi/sata.asl"
- } /* end STCR */
-
- Device(UOH1) {
- Name(_ADR, 0x00120000)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH1 */
-
- Device(UOH2) {
- Name(_ADR, 0x00120002)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH2 */
-
- Device(UOH3) {
- Name(_ADR, 0x00130000)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH3 */
-
- Device(UOH4) {
- Name(_ADR, 0x00130002)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH4 */
-
- Device(UOH5) {
- Name(_ADR, 0x00160000)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH5 */
-
- Device(UOH6) {
- Name(_ADR, 0x00160002)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH5 */
-
- Device(UEH1) {
- Name(_ADR, 0x00140005)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UEH1 */
-
- Device(SBUS) {
- Name(_ADR, 0x00140000)
- } /* end SBUS */
-
- Device(AZHD) {
- Name(_ADR, 0x00140002)
- OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
- Field(AZPD, AnyAcc, NoLock, Preserve) {
- offset (0x42),
- NSDI, 1,
- NSDO, 1,
- NSEN, 1,
- offset (0x44),
- IPCR, 4,
- offset (0x54),
- PWST, 2,
- , 6,
- PMEB, 1,
- , 6,
- PMST, 1,
- offset (0x62),
- MMCR, 1,
- offset (0x64),
- MMLA, 32,
- offset (0x68),
- MMHA, 32,
- offset (0x6C),
- MMDT, 16,
- }
- } /* end AZHD */
-
- Device(LIBR) {
- Name(_ADR, 0x00140003)
-
- /* Real Time Clock Device */
- Device(RTC0) {
- Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */
- Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){8}
- IO(Decode16,0x0070, 0x0070, 0, 2)
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
-
- Device(TMR) { /* Timer */
- Name(_HID,EISAID("PNP0100")) /* System Timer */
- Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){0}
- IO(Decode16, 0x0040, 0x0040, 0, 4)
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
-
- Device(SPKR) { /* Speaker */
- Name(_HID,EISAID("PNP0800")) /* AT style speaker */
- Name(_CRS, ResourceTemplate() {
- IO(Decode16, 0x0061, 0x0061, 0, 1)
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
-
- Device(PIC) {
- Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */
- Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){2}
- IO(Decode16,0x0020, 0x0020, 0, 2)
- IO(Decode16,0x00A0, 0x00A0, 0, 2)
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
-
- Device(MAD) { /* 8257 DMA */
- Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */
- Name(_CRS, ResourceTemplate() {
- DMA(Compatibility,BusMaster,Transfer8){4}
- IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
- IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
- IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
- IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
- IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
- IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
- }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
- } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
-
- Device(COPR) {
- Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */
- Name(_CRS, ResourceTemplate() {
- IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
- IRQNoFlags(){13}
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
- #include "acpi/superio.asl"
- } /* end LIBR */
-
- Device(HPBR) {
- Name(_ADR, 0x00140004)
- } /* end HostPciBr */
-
- Device(ACAD) {
- Name(_ADR, 0x00140005)
- } /* end Ac97audio */
-
- Device(ACMD) {
- Name(_ADR, 0x00140006)
- } /* end Ac97modem */
-
- Name(CRES, ResourceTemplate() {
- /* Set the Bus number and Secondary Bus number for the PCI0 device
- * The Secondary bus range for PCI0 lets the system
- * know what bus values are allowed on the downstream
- * side of this PCI bus if there is a PCI-PCI bridge.
- * PCI busses can have 256 secondary busses which
- * range from [0-0xFF] but they do not need to be
- * sequential.
- */
- WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
- 0x0000, /* address granularity */
- 0x0000, /* range minimum */
- 0x00FF, /* range maximum */
- 0x0000, /* translation */
- 0x0100, /* length */
- ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */
-
- IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */
- IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
-
- WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, /* address granularity */
- 0x0000, /* range minimum */
- 0x0CF7, /* range maximum */
- 0x0000, /* translation */
- 0x0CF8 /* length */
- )
-
- WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, /* address granularity */
- 0x0D00, /* range minimum */
- 0xFFFF, /* range maximum */
- 0x0000, /* translation */
- 0xF300 /* length */
- )
-
- Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
- /* memory space for PCI BARs below 4GB */
- Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
- }) /* End Name(_SB.PCI0.CRES) */
-
- Method(_CRS, 0) {
- CreateDWordField(CRES, ^MMIO._BAS, MM1B)
- CreateDWordField(CRES, ^MMIO._LEN, MM1L)
- /*
- * Declare memory between TOM1 and 4GB as available
- * for PCI MMIO.
- * Use ShiftLeft to avoid 64bit constant (for XP).
- * This will work even if the OS does 32bit arithmetic, as
- * 32bit (0x00000000 - TOM1) will wrap and give the same
- * result as 64bit (0x100000000 - TOM1).
- */
- Store(TOM1, MM1B)
- ShiftLeft(0x10000000, 4, Local0)
- Subtract(Local0, TOM1, Local0)
- Store(Local0, MM1L)
-
- Return(CRES) /* note to change the Name buffer */
- } /* end of Method(_SB.PCI0._CRS) */
-
- /*
- *
- * FIRST METHOD CALLED UPON BOOT
- *
- * 1. If debugging, print current OS and ACPI interpreter.
- * 2. Get PCI Interrupt routing from ACPI VSM, this
- * value is based on user choice in BIOS setup.
- */
- Method(_INI, 0) {
- /* Determine the OS we're running on */
- OSFL()
- } /* End Method(_SB._INI) */
- } /* End Device(PCI0) */
-
- Device(PWRB) { /* Start Power button device */
- Name(_HID, EISAID("PNP0C0C"))
- Name(_UID, 0xAA)
- Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
- Name(_STA, 0x0B) /* sata is invisible */
- }
- } /* End \_SB scope */
-
- Scope(\_SI) {
- Method(_SST, 1) {
- }
- } /* End Scope SI */
-}
-/* End of ASL file */
diff --git a/src/mainboard/lippert/toucan-af/irq_tables.c b/src/mainboard/lippert/toucan-af/irq_tables.c
deleted file mode 100644
index 5d2d253..0000000
--- a/src/mainboard/lippert/toucan-af/irq_tables.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <console/console.h>
-#include <device/pci_def.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
- u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
- u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
- u8 slot, u8 rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- u32 slot_num;
- u8 *v;
-
- u8 sum = 0;
- int i;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (u8 *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = 0;
- pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1002;
- pirq->rtr_device = 0x4384;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-
- /* pci bridge */
- write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
- 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
- 0);
- pirq_info++;
-
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "%s done.\n", __func__);
-
- return (unsigned long)pirq_info;
-
-}
diff --git a/src/mainboard/lippert/toucan-af/mptable.c b/src/mainboard/lippert/toucan-af/mptable.c
deleted file mode 100644
index 5196caf..0000000
--- a/src/mainboard/lippert/toucan-af/mptable.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <arch/smp/mpspec.h>
-#include <arch/io.h>
-#include <arch/ioapic.h>
-#include <string.h>
-#include <stdint.h>
-#include <southbridge/amd/cimx/sb800/SBPLATFORM.h>
-
-u8 intr_data[] = {
- [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
- [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x10,0x11,0x12,0x13
-};
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- int bus_isa;
-
- /*
- * By the time this function gets called, the IOAPIC registers
- * have been written so they can be read to get the correct
- * APIC ID and Version
- */
- u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
- u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
- memcpy(mc->mpc_oem, "AMD ", 8);
-
- smp_write_processors(mc);
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
- /* I/O APICs: APIC ID Version State Address */
- smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
-
- u8 byte;
-
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
-
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
-
- mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
-
- /* PCI interrupts are level triggered, and are
- * associated with a specific bus/device/function tuple.
- */
-#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin))
-
- /* APU Internal Graphic Device*/
- PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
- PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
-
- //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
- /* Southbridge HD Audio: */
- PCI_INT(0x0, 0x14, 0x2, 0x12);
-
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
-
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
-
- /* on board NIC & Slot PCIE. */
-
- /* PCI slots */
- struct device *dev = pcidev_on_root(0x14, 4);
- if (dev && dev->enabled) {
- u8 bus_pci = dev->link_list->secondary;
- /* PCI_SLOT 0. */
- PCI_INT(bus_pci, 0x5, 0x0, 0x14);
- PCI_INT(bus_pci, 0x5, 0x1, 0x15);
- PCI_INT(bus_pci, 0x5, 0x2, 0x16);
- PCI_INT(bus_pci, 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_pci, 0x6, 0x0, 0x15);
- PCI_INT(bus_pci, 0x6, 0x1, 0x16);
- PCI_INT(bus_pci, 0x6, 0x2, 0x17);
- PCI_INT(bus_pci, 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_pci, 0x7, 0x0, 0x16);
- PCI_INT(bus_pci, 0x7, 0x1, 0x17);
- PCI_INT(bus_pci, 0x7, 0x2, 0x14);
- PCI_INT(bus_pci, 0x7, 0x3, 0x15);
- }
-
- /* PCIe PortA */
- PCI_INT(0x0, 0x15, 0x0, 0x10);
- /* PCIe PortB */
- PCI_INT(0x0, 0x15, 0x1, 0x11);
- /* PCIe PortC */
- PCI_INT(0x0, 0x15, 0x2, 0x12);
- /* PCIe PortD */
- PCI_INT(0x0, 0x15, 0x3, 0x13);
-
- /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
- IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/lippert/toucan-af/platform_cfg.h b/src/mainboard/lippert/toucan-af/platform_cfg.h
deleted file mode 100644
index b029efb..0000000
--- a/src/mainboard/lippert/toucan-af/platform_cfg.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-
-#ifndef _PLATFORM_CFG_H_
-#define _PLATFORM_CFG_H_
-
-/**
- * @def BIOS_SIZE
- * BIOS_SIZE_{1,2,4,8,16}M
- *
- * In SB800, default ROM size is 1M Bytes, if your platform ROM
- * bigger than 1M you have to set the ROM size outside CIMx module and
- * before AGESA module get call.
- */
-#ifndef BIOS_SIZE
-#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1)
-#endif /* BIOS_SIZE */
-
-/**
- * @def SPREAD_SPECTRUM
- * @brief
- * 0 - Disable Spread Spectrum function
- * 1 - Enable Spread Spectrum function
- */
-#define SPREAD_SPECTRUM 0
-
-/**
- * @def SB_HPET_TIMER
- * @brief
- * 0 - Disable hpet
- * 1 - Enable hpet
- */
-#define HPET_TIMER 1
-
-/**
- * @def USB_CONFIG
- * @brief bit[0-6] used to control USB
- * 0 - Disable
- * 1 - Enable
- * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0
- * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1
- * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2
- * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3
- * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4
- * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5
- * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6
- */
-#define USB_CONFIG 0x0F
-
-/**
- * @def PCI_CLOCK_CTRL
- * @brief bit[0-4] used for PCI Slots Clock Control,
- * 0 - disable
- * 1 - enable
- * PCI SLOT 0 define at BIT0
- * PCI SLOT 1 define at BIT1
- * PCI SLOT 2 define at BIT2
- * PCI SLOT 3 define at BIT3
- * PCI SLOT 4 define at BIT4
- */
-#define PCI_CLOCK_CTRL 0x1E
-
-/**
- * @def SATA_CONTROLLER
- * @brief INCHIP Sata Controller
- */
-#define SATA_CONTROLLER CIMX_OPTION_ENABLED
-
-/**
- * @def SATA_MODE
- * @brief INCHIP Sata Controller Mode
- * NOTE: DO NOT ALLOW SATA & IDE use same mode
- */
-#define SATA_MODE CONFIG_SB800_SATA_MODE
-
-/**
- * @brief INCHIP Sata IDE Controller Mode
- */
-#define IDE_LEGACY_MODE 0
-#define IDE_NATIVE_MODE 1
-
-/**
- * @def SATA_IDE_MODE
- * @brief INCHIP Sata IDE Controller Mode
- * NOTE: DO NOT ALLOW SATA & IDE use same mode
- */
-#define SATA_IDE_MODE IDE_LEGACY_MODE
-
-/**
- * @def EXTERNAL_CLOCK
- * @brief 00/10: Reference clock from crystal oscillator via
- * PAD_XTALI and PAD_XTALO
- *
- * @def INTERNAL_CLOCK
- * @brief 01/11: Reference clock from internal clock through
- * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
- */
-#define EXTERNAL_CLOCK 0x00
-#define INTERNAL_CLOCK 0x01
-
-/* NOTE: inagua have to using internal clock,
- * otherwise can not detect sata drive
- */
-#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
-
-/**
- * @def SATA_PORT_MULT_CAP_RESERVED
- * @brief 1 ON, 0 0FF
- */
-#define SATA_PORT_MULT_CAP_RESERVED 1
-
-
-/**
- * @def AZALIA_AUTO
- * @brief Detect Azalia controller automatically.
- *
- * @def AZALIA_DISABLE
- * @brief Disable Azalia controller.
-
- * @def AZALIA_ENABLE
- * @brief Enable Azalia controller.
- */
-#define AZALIA_AUTO 0
-#define AZALIA_DISABLE 1
-#define AZALIA_ENABLE 2
-
-/**
- * @brief INCHIP HDA controller
- */
-#define AZALIA_CONTROLLER AZALIA_AUTO
-
-/**
- * @def AZALIA_PIN_CONFIG
- * @brief
- * 0 - disable
- * 1 - enable
- */
-#define AZALIA_PIN_CONFIG 1
-
-/**
- * @def AZALIA_SDIN_PIN
- * @brief
- * SDIN0 is define at BIT0 & BIT1
- * 00 - GPIO PIN
- * 01 - Reserved
- * 10 - As a Azalia SDIN pin
- * SDIN1 is define at BIT2 & BIT3
- * SDIN2 is define at BIT4 & BIT5
- * SDIN3 is define at BIT6 & BIT7
- */
-#define AZALIA_SDIN_PIN 0x2A
-
-/**
- * @def GPP_CONTROLLER
- */
-#define GPP_CONTROLLER CIMX_OPTION_ENABLED
-
-/**
- * @def GPP_CFGMODE
- * @brief GPP Link Configuration
- * four possible configuration:
- * GPP_CFGMODE_X4000
- * GPP_CFGMODE_X2200
- * GPP_CFGMODE_X2110
- * GPP_CFGMODE_X1111
- */
-#define GPP_CFGMODE GPP_CFGMODE_X1111
-
-/**
- * @def NB_SB_GEN2
- * 0 - Disable
- * 1 - Enable
- */
-#define NB_SB_GEN2 TRUE
-
-/**
- * @def SB_GPP_GEN2
- * 0 - Disable
- * 1 - Enable
- */
-#define SB_GPP_GEN2 TRUE
-
-/**
- * @def SB_GPP_UNHIDE_PORTS
- * TRUE - ports visible always, even port empty
- * FALSE - ports invisible if port empty
- */
-#define SB_GPP_UNHIDE_PORTS FALSE
-
-/**
- * @def GEC_CONFIG
- * 0 - Enable
- * 1 - Disable
- */
-#define GEC_CONFIG 1
-
-static const CODECENTRY sample_codec_alc886[] = /* Realtek ALC886/8 */
-{
- /* NID, PinConfig (Verbs 71F..C) */
- {0x11, 0x411111F0}, /* NPC */
- {0x12, 0x411111F0}, /* DMIC */
- {0x14, 0x01214110}, /* FRONT (Port-D) */
- {0x15, 0x01011112}, /* SURR (Port-A) */
- {0x16, 0x01016111}, /* CEN/LFE (Port-G) */
- {0x17, 0x411111F0}, /* SIDESURR (Port-H) */
- {0x18, 0x01A19930}, /* MIC1 (Port-B) */
- {0x19, 0x411111F0}, /* MIC2 (Port-F) */
- {0x1A, 0x0181313F}, /* LINE1 (Port-C) */
- {0x1B, 0x411111F0}, /* LINE2 (Port-E) */
- {0x1C, 0x411111F0}, /* CD-IN */
- {0x1D, 0x40132601}, /* BEEP-IN */
- {0x1E, 0x01441120}, /* S/PDIF-OUT */
- {0x1F, 0x01C46140}, /* S/PDIF-IN */
- {0xff, 0xffffffff} /* end of table */
-};
-
-static const CODECTBLLIST codec_tablelist[] =
-{
- {0x10ec0888, (CODECENTRY*)&sample_codec_alc886[0]},
- {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL}
-};
-
-/**
- * @def AZALIA_OEM_VERB_TABLE
- * Mainboard specific codec verb table list
- */
-#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0])
-
-#endif
To view, visit change 43274. To unsubscribe, or for help writing mail filters, visit settings.