Tim Chen would like Tim Chen to review this change.
mb/google/dedede/var/metaknight: Add device settings
Add the configuration in device tree:
1. Add HDA,speaker codec and speaker amp setting
2. Add Elan, Raydium and Goodix touchscreen setting
3. Add user/world facing camera usb setting
4 Add Synaptics and Elan Touchpad setting
5. Add WiFi configuration
6. Add DPTF setting
BUG=b:169813211
BRANCH=None
TEST=build metaknight firmware
Change-Id: Ie034724ea5c6edff6cdba694605d3238f66be910
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
---
M src/mainboard/google/dedede/variants/metaknight/overridetree.cb
1 file changed, 175 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/13/47013/1
diff --git a/src/mainboard/google/dedede/variants/metaknight/overridetree.cb b/src/mainboard/google/dedede/variants/metaknight/overridetree.cb
index 404024b..af7de71 100644
--- a/src/mainboard/google/dedede/variants/metaknight/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/metaknight/overridetree.cb
@@ -1,5 +1,9 @@
chip soc/intel/jasperlake
+ # USB Port Configuration
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # World Facing Camera
+
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
@@ -11,7 +15,7 @@
#| I2C0 | Trackpad |
#| I2C1 | Digitizer |
#| I2C2 | Touchscreen |
- #| I2C3 | Camera |
+ #| I2C3 | TBD |
#| I2C4 | Audio |
#+-------------------+---------------------------+
register "common_soc_config" = "{
@@ -36,7 +40,176 @@
},
}"
+ register "power_limits_config" = "{
+ .tdp_pl1_override = 7,
+ .tdp_pl2_override = 12,
+ }"
+
+ register "tcc_offset" = "15" # TCC of 90C
+
device domain 0 on
- device pci 15.0 on end
+ device pci 04.0 on
+ chip drivers/intel/dptf
+ register "options.tsr[0].desc" = ""Memory""
+ register "options.tsr[1].desc" = ""Ambient""
+
+ register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 90, 5000)"
+ register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 70, 6000)"
+ register "policies.passive[2]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 60, 5000)"
+
+ register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 105, SHUTDOWN)"
+ register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 80, SHUTDOWN)"
+ register "policies.critical[2]" = "DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN)"
+
+ register "controls.power_limits.pl1" = "{
+ .min_power = 3000,
+ .max_power = 7000,
+ .time_window_min = 1 * MSECS_PER_SEC,
+ .time_window_max = 1 * MSECS_PER_SEC,
+ .granularity = 200,}"
+ register "controls.power_limits.pl2" = "{
+ .min_power = 7000,
+ .max_power = 12000,
+ .time_window_min = 1 * MSECS_PER_SEC,
+ .time_window_max = 1 * MSECS_PER_SEC,
+ .granularity = 1000,}"
+
+ ## Charger Performance Control (Control, mA)
+ register "controls.charger_perf[0]" = "{ 255, 3000 }"
+ register "controls.charger_perf[1]" = "{ 24, 1500 }"
+ register "controls.charger_perf[2]" = "{ 16, 1000 }"
+ register "controls.charger_perf[3]" = "{ 8, 500 }"
+
+ device generic 0 on end
+ end
+ end # SA Thermal device
+ device pci 14.0 on
+ chip drivers/usb/acpi
+ device usb 0.0 on
+ chip drivers/usb/acpi
+ register "desc" = ""Camera""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 2.5 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Camera""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 2.6 on end
+ end
+ end
+ end
+ end # USB xHCI
+ device pci 15.0 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""PNP0C50""
+ register "generic.desc" = ""Synaptics Touchpad""
+ register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+ register "generic.wake" = "GPE0_DW0_03"
+ register "generic.probed" = "1"
+ register "hid_desc_reg_offset" = "0x20"
+ device i2c 0x2c on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_03"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # I2C 0
+ device pci 15.2 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""GDIX0000""
+ register "generic.desc" = ""Goodix Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+ register "generic.reset_delay_ms" = "120"
+ register "generic.reset_off_delay_ms" = "2"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+ register "generic.enable_delay_ms" = "12"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 0x5d on end
+ end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ELAN6915""
+ register "generic.desc" = ""ELAN Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+ register "generic.reset_delay_ms" = "20"
+ register "generic.reset_off_delay_ms" = "2"
+ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
+ register "generic.stop_delay_ms" = "280"
+ register "generic.stop_off_delay_ms" = "2"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+ register "generic.enable_delay_ms" = "1"
+ register "generic.has_power_resource" = "1"
+ register "generic.disable_gpio_export_in_crs" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 15 on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
+ register "probed" = "1"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+ register "reset_delay_ms" = "20"
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+ register "enable_delay_ms" = "1"
+ register "has_power_resource" = "1"
+ device i2c 10 on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""RAYD0001""
+ register "desc" = ""Raydium Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
+ register "probed" = "1"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+ register "reset_delay_ms" = "1"
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+ register "enable_delay_ms" = "50"
+ register "has_power_resource" = "1"
+ register "disable_gpio_export_in_crs" = "1"
+ device i2c 39 on end
+ end
+ end # I2C 2
+ device pci 15.3 off end # I2C 3
+ device pci 19.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""10EC5682""
+ register "name" = ""RT58""
+ register "desc" = ""Realtek RT5682""
+ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+ register "property_count" = "1"
+ register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+ register "property_list[0].name" = ""realtek,jd-src""
+ register "property_list[0].integer" = "1"
+ device i2c 1a on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""10EC1015""
+ register "desc" = ""Realtek SPK AMP L""
+ register "uid" = "0"
+ device i2c 28 on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""10EC1015""
+ register "desc" = ""Realtek SPK AMP R""
+ register "uid" = "1"
+ device i2c 29 on end
+ end
+ end
+ device pci 1f.3 on end # Intel HDA
+ device pci 1c.7 on
+ chip drivers/wifi/generic
+ register "wake" = "GPE0_DW2_03"
+ device pci 00.0 on end
+ end
+ end # PCI Express Root Port 8 - WLAN
end
end
To view, visit change 47013. To unsubscribe, or for help writing mail filters, visit settings.