7 comments:
File src/mainboard/google/volteer/variants/lingcod/gpio.c:
/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
PAD_CFG_GPO(GPP_C22, 0, DEEP),
/* C23 : UART2_CTS# ==> FPMCU_RST_ODL */
PAD_CFG_GPO(GPP_C23, 1, DEEP),
Could you please double check if you need to support the fingerprint? I don' find the fingerprint from the schematics.
/* D17 : ISH_GP4 ==> EN_CVF_PWR */
PAD_CFG_GPO(GPP_D17, 1, DEEP),
Do you need this? From the schematics, the PP3300_FCAM doesn't connect to anything. Please double check it.
/* E1 : SPI1_IO2 ==> PEN_DET_ODL */
PAD_CFG_GPI_SCI_LOW(GPP_E1, NONE, DEEP, EDGE_SINGLE),
Will the project support the pen ejection? I don't see the implementation from the schematics.
/* E12 : SPI1_MISO_IO1 ==> PEN_ALERT_ODL */
PAD_CFG_GPI(GPP_E12, NONE, DEEP),
Please check if this is needed. I don't see the pen charger.
/* H19 : TIME_SYNC0 ==> USER_PRES_FP_ODL */
PAD_CFG_GPI(GPP_H19, NONE, DEEP),
Could you please double check if you need to support the fingerprint?
/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
PAD_CFG_GPO(GPP_C22, 0, DEEP),
Could you please double check if you need to support the fingerprint?
/* E12 : SPI1_MISO_IO1 ==> PEN_ALERT_ODL */
PAD_CFG_GPO(GPP_E12, 1, DEEP),
Please check if this is needed. I don't see the pen charger.
To view, visit change 43442. To unsubscribe, or for help writing mail filters, visit settings.