Felix Singer submitted this change.
mb/google/brox: Set display output type for eDP panel
Set the display type for the LCD panel configured via the gfx/generic
driver. This will ensure the correct DID/device address are generated
in the SSDT.
Change-Id: If63374329ed5eb4330517ca1bf2ba1ada24fa54a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80244
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/mainboard/google/brox/variants/brox/overridetree.cb
1 file changed, 1 insertion(+), 0 deletions(-)
diff --git a/src/mainboard/google/brox/variants/brox/overridetree.cb b/src/mainboard/google/brox/variants/brox/overridetree.cb
index 82a836f..d13b276 100644
--- a/src/mainboard/google/brox/variants/brox/overridetree.cb
+++ b/src/mainboard/google/brox/variants/brox/overridetree.cb
@@ -30,6 +30,7 @@
register "device_count" = "6"
# DDIA for eDP
register "device[0].name" = ""LCD0""
+ register "device[0].type" = "panel"
# DDIB for HDMI
# If HDMI is not enumerated in the kernel, then no GFX device should be added for DDIB
register "device[1].name" = ""DD01""
To view, visit change 80244. To unsubscribe, or for help writing mail filters, visit settings.