Alex1 Kao has uploaded this change for review.
mb/google/dedede: Update pirika device tree
Update pirika device tree override to match schematics.
BUG=b:184157747
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com>
Change-Id: I15b9cb0d0276b5e2dd06694530cc35e5643efb9d
---
M src/mainboard/google/dedede/variants/pirika/overridetree.cb
1 file changed, 142 insertions(+), 13 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/36/52936/1
diff --git a/src/mainboard/google/dedede/variants/pirika/overridetree.cb b/src/mainboard/google/dedede/variants/pirika/overridetree.cb
index 404024b..b74e31e 100644
--- a/src/mainboard/google/dedede/variants/pirika/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/pirika/overridetree.cb
@@ -9,9 +9,6 @@
#| | for TPM communication |
#| | before memory is up |
#| I2C0 | Trackpad |
- #| I2C1 | Digitizer |
- #| I2C2 | Touchscreen |
- #| I2C3 | Camera |
#| I2C4 | Audio |
#+-------------------+---------------------------+
register "common_soc_config" = "{
@@ -21,22 +18,154 @@
},
.i2c[0] = {
.speed = I2C_SPEED_FAST,
- },
- .i2c[1] = {
- .speed = I2C_SPEED_FAST,
- },
- .i2c[2] = {
- .speed = I2C_SPEED_FAST,
- },
- .i2c[3] = {
- .speed = I2C_SPEED_FAST,
+ .speed_config[0] = {
+ .speed = I2C_SPEED_FAST,
+ .scl_lcnt = 190,
+ .scl_hcnt = 100,
+ .sda_hold = 40,
+ }
},
.i2c[4] = {
.speed = I2C_SPEED_FAST,
+ .speed_config[0] = {
+ .speed = I2C_SPEED_FAST,
+ .scl_lcnt = 190,
+ .scl_hcnt = 100,
+ .sda_hold = 40,
+ }
},
}"
+ register "SerialIoI2cMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C4] = PchSerialIoPci,
+ }"
+
+ # USB Port Configuration
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
+
+ register "tcc_offset" = "8" # TCC of 97C
+
device domain 0 on
- device pci 15.0 on end
+ device pci 04.0 on
+ # Default DPTF Policy for all Dedede boards if not overridden
+ chip drivers/intel/dptf
+ ## Passive Policy
+ register "policies.passive" = "{
+ [0] = DPTF_PASSIVE(CPU, CPU, 67, 1000),
+ [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 62, 1000),
+ [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 58, 1000),
+ [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 40, 1000)
+ }"
+
+ ## Critical Policy
+ register "policies.critical" = "{
+ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
+ [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 98, SHUTDOWN),
+ [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN),
+ [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 80, SHUTDOWN)
+ }"
+
+ ## Power Limits Control
+ register "controls.power_limits" = "{
+ .pl1 = {
+ .min_power = 4500,
+ .max_power = 7000,
+ .time_window_min = 1 * MSECS_PER_SEC,
+ .time_window_max = 1 * MSECS_PER_SEC,
+ .granularity = 200,
+ },
+ .pl2 = {
+ .min_power = 20000,
+ .max_power = 20000,
+ .time_window_min = 1 * MSECS_PER_SEC,
+ .time_window_max = 1 * MSECS_PER_SEC,
+ .granularity = 1000,
+ }
+ }"
+
+ register "options.tsr[0].desc" = ""Charger""
+ register "options.tsr[1].desc" = ""Vcore""
+ register "options.tsr[2].desc" = ""Ambient""
+
+ device generic 0 on end
+ end
+ end # SA Thermal device
+ device pci 14.0 on
+ chip drivers/usb/acpi
+ device usb 0.0 on
+ chip drivers/usb/acpi
+ register "desc" = ""Camera""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 2.5 on end
+ end
+ end
+ end
+ end # USB xHCI
+
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_03"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""ELAN2702""
+ register "generic.desc" = ""ELAN Touchpad""
+ register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)"
+ register "generic.wake" = "GPE0_DW0_03"
+ register "generic.probed" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 15 on end
+ end
+ end
+ device pci 15.1 off end
+ device pci 15.2 off end
+ device pci 15.3 off end
+ device pci 19.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""10EC5682""
+ register "name" = ""RT58""
+ register "desc" = ""Realtek RT5682""
+ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+ register "property_count" = "1"
+ register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+ register "property_list[0].name" = ""realtek,jd-src""
+ register "property_list[0].integer" = "1"
+ device i2c 1a on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""10EC1015""
+ register "desc" = ""Realtek SPK AMP L""
+ register "uid" = "0"
+ device i2c 28 on
+ probe AUDIO_AMP RT1015_I2C
+ probe AUDIO_AMP UNPROVISIONED
+ end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""10EC1015""
+ register "desc" = ""Realtek SPK AMP R""
+ register "uid" = "1"
+ device i2c 29 on
+ probe AUDIO_AMP RT1015_I2C
+ probe AUDIO_AMP UNPROVISIONED
+ end
+ end
+ end
+ device pci 1f.3 on
+ chip drivers/generic/alc1015
+ register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
+ device generic 0 on
+ probe AUDIO_AMP RT1015P_AUTO
+ end
+ end
+ end # Intel HDA
end
end
To view, visit change 52936. To unsubscribe, or for help writing mail filters, visit settings.