Made a couple more comments. It's working fine on my Minnowboard with the changes mentioned below.
6 comments:
Patch Set #3, Line 25: - SD card
SD card does not work. Getting "Unexpected interrupt 0x4000000. […]
Setting the sdcard_cap_low and sdcard_cap_high in the devicetree.cb fixes this issue.
Patch Set #3, Line 26: - Display output
Works fine with VBIOS.
File src/mainboard/intel/minnowmax/cmos.layout:
Patch Set #3, Line 18: 409 2 e 7 power_on_after_fail
Would it make more sense to have it 1 since the device has no power button?
File src/mainboard/intel/minnowmax/devicetree.cb:
The SD card won't work unless you add the following (from the rambi devicetree.cb):
register "sdcard_cap_low" = "0x036864b2"
register "sdcard_cap_high" = "0x0"
Patch Set #3, Line 52: device pci 1a.0 on end # 8086 0F18 - TXE -
This device isn't supported, might as well disable it to spare some dmesg errors.
File src/mainboard/intel/minnowmax/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex:
If this SPD was chosen at random it's an odd coincidence that it is the exact chips that are on my Minnowmax.
To view, visit change 44102. To unsubscribe, or for help writing mail filters, visit settings.