Ravi kumar would like Taniya Das to review this change.
sc7180: clock: Remove unwanted QUPv3 Frequency
As the UART clock frequency is no longer required by the UART
driver, remove the unwated frequency.
Tested: Compile and boot up testing.
Change-Id: I137682b3ca45481ad34ac8ddb5cd308444f752a7
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
---
M src/soc/qualcomm/sc7180/clock.c
M src/soc/qualcomm/sc7180/include/soc/clock.h
2 files changed, 0 insertions(+), 9 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/45198/1
diff --git a/src/soc/qualcomm/sc7180/clock.c b/src/soc/qualcomm/sc7180/clock.c
index 3702fa6..919735d 100644
--- a/src/soc/qualcomm/sc7180/clock.c
+++ b/src/soc/qualcomm/sc7180/clock.c
@@ -12,14 +12,6 @@
struct clock_config qup_cfg[] = {
{
- .hz = QUPV3_UART_SRC_HZ,
- .src = SRC_GPLL0_EVEN_300MHZ,
- .div = DIV(1),
- .m = 384,
- .n = 15625,
- .d_2 = 15625,
- },
- {
.hz = SRC_XO_HZ, /* 19.2KHz */
.src = SRC_XO_19_2MHZ,
.div = DIV(1),
diff --git a/src/soc/qualcomm/sc7180/include/soc/clock.h b/src/soc/qualcomm/sc7180/include/soc/clock.h
index c9ecfb2..62e2a34 100644
--- a/src/soc/qualcomm/sc7180/include/soc/clock.h
+++ b/src/soc/qualcomm/sc7180/include/soc/clock.h
@@ -20,7 +20,6 @@
#define SRC_XO_HZ (19200 * KHz)
#define GPLL0_EVEN_HZ (300 * MHz)
#define GPLL0_MAIN_HZ (600 * MHz)
-#define QUPV3_UART_SRC_HZ 7372800
#define SRC_XO_19_2MHZ 0
#define SRC_GPLL0_MAIN_600MHZ 1
To view, visit change 45198. To unsubscribe, or for help writing mail filters, visit settings.