Ravi kumar has uploaded this change for review.

View Change

sc7280: HACK PATCH: UART source clock frequency change

On SoC, console UART works fine with 19.2MHz
On Rumi, facing issues with 19.2MHz and changed it to 7372800Hz

Change-Id: I7e91d704f51290d4e368972d53fde59161936c3f
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
---
M src/soc/qualcomm/sc7280/qupv3_uart.c
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/28/47528/1

diff --git a/src/soc/qualcomm/sc7280/qupv3_uart.c b/src/soc/qualcomm/sc7280/qupv3_uart.c
index 5679a25..c9ae1ab 100644
--- a/src/soc/qualcomm/sc7280/qupv3_uart.c
+++ b/src/soc/qualcomm/sc7280/qupv3_uart.c
@@ -71,7 +71,7 @@
 	/* sc7280 requires 16 clock pulses to sample 1 bit of data */
 	uart_freq = baud_rate * 16;
 
-	div = DIV_ROUND_CLOSEST(SRC_XO_HZ, uart_freq);
+	div = DIV_ROUND_CLOSEST(7372800, uart_freq);
 	write32(&regs->geni_ser_m_clk_cfg, (div << 4) | 1);
 	write32(&regs->geni_ser_s_clk_cfg, (div << 4) | 1);
 

To view, visit change 47528. To unsubscribe, or for help writing mail filters, visit settings.