Furquan Shaikh has uploaded this change for review.
device: Add support for resource allocator v4
This change adds back support for the resource allocator using
multiple ranges as originally landed in CB:39486 and reverted in
CB:41413. The new resource allocator can be selected by Kconfig option
RESOURCE_ALLOCATOR_V4. It was identified that there are some AMD
chipsets in the tree that do not really work well with the dynamic
resource allocation. Until these chipsets are fixed, old(v3) and
new(v4) of the resource allocator need to live side-by-side in the
tree.
This change picks up the same additions as performed in CB:39486 along
with the following changes:
1. Changes are incorporated to avoid fixed resources hanging off pci
domain device (CB:41363)
2. Changes to set up alignment for memranges when intializing
them. This is done to ensure that the right granularity is used for
IORESOURCE_IO(no special alignment) and IORESOURCE_MEM(4KiB) resource
requests.
Original commit message:
This change updates the resource allocator in coreboot to allow using
multiple ranges for resource allocation rather than restricting
available window to a single base/limit pair. This is done in
preparation to allow 64-bit resource allocation.
Following changes are made as part of this:
a) Resource allocator still makes 2 passes at the entire tree. The
first pass is to gather the resource requirements of each device
under each domain. It walks recursively in DFS fashion to gather the
requirements of the leaf devices and propagates this back up to the
downstream bridges of the domain. Domain is special in the sense that
it has fixed resource ranges. Hence, the resource requirements from
the downstream devices have no effect on the domain resource
windows. This results in domain resource limits being unmodified after
the first pass.
b) Once the requirements for all the devices under the domain are
gathered, resource allocator walks a second time to allocate resources
to downstream devices as per the requirements. Here, instead of
maintaining a single window for allocating resources, it creates a
list of memranges starting with the resource window at domain and then
applying constraints to create holes for any fixed resources. This
ensures that there is no overlap with fixed resources under the
domain.
c) Domain does not differentiate between mem and prefmem. Since they
are allocated space from the same resource window at the domain level,
it considers all resource requests from downstream devices of the
domain independent of the prefetch type.
d) Once resource allocation is done at the domain level, resource
allocator walks down the downstream bridges and continues the same
process until it reaches the leaves. Bridges have separate windows for
mem and prefmem. Hence, unlike domain, the resource allocator at
bridge level ensures that downstream requirements are satisfied by
taking prefetch type into consideration.
e) This whole 2-pass process is performed for every domain in the
system under the assumption that domains do not have overlapping
address spaces.
Noticeable differences from previous resource allocator:
a) Changes in print logs observed due to flows being slightly
different.
b) Base, limit and size of domain resources are no longer updated
based on downstream requirements.
c) Memranges are used instead of a single base/limit pair for
determining resource allocation.
d) Previously, if a resource request did not fit in the available
base/limit window, then the resource would be allocated over DRAM or
any other address space defeating the principle of "no overlap". With
this change, any time a resource cannot fit in the available ranges,
it complains and ensures that the resource is effectively disabled by
setting base same as the limit.
e) Resource allocator no longer looks at multiple links to determine
the right bus for a resource. None of the current boards have multiple
buses under any downstream device of the domain. The only device with
multiple links seems to be the cpu cluster device for some AMD
platforms.
Change-Id: Ide4d98528197bb03850a8fb4d73c41cd2c0195aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
---
M src/device/Kconfig
M src/device/Makefile.inc
A src/device/resource_allocator_v4.c
3 files changed, 570 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/43/41443/1
diff --git a/src/device/Kconfig b/src/device/Kconfig
index bfa4759..e340841 100644
--- a/src/device/Kconfig
+++ b/src/device/Kconfig
@@ -801,4 +801,13 @@
This config option enables resource allocator v3 which performs
top down allocation of resources in a single MMIO window.
+config RESOURCE_ALLOCATOR_V4
+ bool
+ default n if RESOURCE_ALLOCATOR_V3
+ default y if !RESOURCE_ALLOCATOR_V3
+ help
+ This config option enables resource allocator v4 which uses multiple
+ ranges for allocating resources. This allows allocation of resources
+ above 4G boundary as well.
+
endmenu
diff --git a/src/device/Makefile.inc b/src/device/Makefile.inc
index 9bbab37..2e62d42 100644
--- a/src/device/Makefile.inc
+++ b/src/device/Makefile.inc
@@ -61,3 +61,4 @@
ramstage-y += resource_allocator_common.c
ramstage-$(CONFIG_RESOURCE_ALLOCATOR_V3) += resource_allocator_v3.c
+ramstage-$(CONFIG_RESOURCE_ALLOCATOR_V4) += resource_allocator_v4.c
diff --git a/src/device/resource_allocator_v4.c b/src/device/resource_allocator_v4.c
new file mode 100644
index 0000000..ac65ed4
--- /dev/null
+++ b/src/device/resource_allocator_v4.c
@@ -0,0 +1,560 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <memrange.h>
+#include <post.h>
+
+/**
+ * Round a number up to an alignment.
+ *
+ * @param val The starting value.
+ * @param pow Alignment as a power of two.
+ * @return Rounded up number.
+ */
+static resource_t round(resource_t val, unsigned long pow)
+{
+ return ALIGN_UP(val, POWER_OF_2(pow));
+}
+
+static const char *resource2str(const struct resource *res)
+{
+ if (res->flags & IORESOURCE_IO)
+ return "io";
+ if (res->flags & IORESOURCE_PREFETCH)
+ return "prefmem";
+ if (res->flags & IORESOURCE_MEM)
+ return "mem";
+ return "undefined";
+}
+
+static bool dev_has_children(const struct device *dev)
+{
+ const struct bus *bus = dev->link_list;
+ return bus && bus->children;
+}
+
+/*
+ * During pass 1, once all the requirements for downstream devices of a bridge are gathered,
+ * this function calculates the overall resource requirement for the bridge. It starts by
+ * picking the largest resource requirement downstream for the given resource type and works by
+ * adding requirements in descending order.
+ *
+ * Additionally, it takes alignment and limits of the downstream devices into consideration and
+ * ensures that they get propagated to the bridge resource. This is required to guarantee that
+ * the upstream bridge/domain honors the limit and alignment requirements for this bridge based
+ * on the tightest constraints downstream.
+ */
+static void update_bridge_resource(const struct device *bridge, struct resource *bridge_res,
+ unsigned long type_match)
+{
+ const struct device *child;
+ struct resource *child_res;
+ resource_t base;
+ bool first_child_res = true;
+ const unsigned long type_mask = IORESOURCE_TYPE_MASK | IORESOURCE_PREFETCH;
+ struct bus *bus = bridge->link_list;
+
+ child_res = NULL;
+
+ /*
+ * `base` keeps track of where the next allocation for child resource can take place
+ * from within the bridge resource window. Since the bridge resource window allocation
+ * is not performed yet, it can start at 0. Base gets updated every time a resource
+ * requirement is accounted for in the loop below. After scanning all these resources,
+ * base will indicate the total size requirement for the current bridge resource
+ * window.
+ */
+ base = 0;
+
+ printk(BIOS_SPEW, "%s %s: size: %llx align: %d gran: %d limit: %llx\n",
+ dev_path(bridge), resource2str(bridge_res), bridge_res->size,
+ bridge_res->align, bridge_res->gran, bridge_res->limit);
+
+ while ((child = largest_resource(bus, &child_res, type_mask, type_match))) {
+
+ /* Size 0 resources can be skipped. */
+ if (!child_res->size)
+ continue;
+
+ /*
+ * Propagate the resource alignment to the bridge resource if this is the first
+ * child resource with non-zero size being considered. For all other children
+ * resources, alignment is taken care of by updating the base to round up as per
+ * the child resource alignment. It is guaranteed that pass 2 follows the exact
+ * same method of picking the resource for allocation using
+ * largest_resource(). Thus, as long as the alignment for first child resource
+ * is propagated up to the bridge resource, it can be guaranteed that the
+ * alignment for all resources is appropriately met.
+ */
+ if (first_child_res && (child_res->align > bridge_res->align))
+ bridge_res->align = child_res->align;
+
+ first_child_res = false;
+
+ /*
+ * Propagate the resource limit to the bridge resource only if child resource
+ * limit is non-zero. If a downstream device has stricter requirements
+ * w.r.t. limits for any resource, that constraint needs to be propagated back
+ * up to the downstream bridges of the domain. This guarantees that the resource
+ * allocation which starts at the domain level takes into account all these
+ * constraints thus working on a global view.
+ */
+ if (child_res->limit && (child_res->limit < bridge_res->limit))
+ bridge_res->limit = child_res->limit;
+
+ /*
+ * Alignment value of 0 means that the child resource has no alignment
+ * requirements and so the base value remains unchanged here.
+ */
+ base = round(base, child_res->align);
+
+ printk(BIOS_SPEW, "%s %02lx * [0x%llx - 0x%llx] %s\n",
+ dev_path(child), child_res->index, base, base + child_res->size - 1,
+ resource2str(child_res));
+
+ base += child_res->size;
+ }
+
+ /*
+ * After all downstream device resources are scanned, `base` represents the total size
+ * requirement for the current bridge resource window. This size needs to be rounded up
+ * to the granularity requirement of the bridge to ensure that the upstream
+ * bridge/domain allocates big enough window.
+ */
+ bridge_res->size = round(base, bridge_res->gran);
+
+ printk(BIOS_SPEW, "%s %s: size: %llx align: %d gran: %d limit: %llx done\n",
+ dev_path(bridge), resource2str(bridge_res), bridge_res->size,
+ bridge_res->align, bridge_res->gran, bridge_res->limit);
+}
+
+/*
+ * During pass 1, resource allocator at bridge level gathers requirements from downstream
+ * devices and updates its own resource windows for the provided resource type.
+ */
+static void compute_bridge_resources(const struct device *bridge, unsigned long type_match)
+{
+ const struct device *child;
+ struct resource *res;
+ struct bus *bus = bridge->link_list;
+ const unsigned long type_mask = IORESOURCE_TYPE_MASK | IORESOURCE_PREFETCH;
+
+ for (res = bridge->resource_list; res; res = res->next) {
+ if (!(res->flags & IORESOURCE_BRIDGE))
+ continue;
+
+ if ((res->flags & type_mask) != type_match)
+ continue;
+
+ /*
+ * Ensure that the resource requirements for all downstream bridges are
+ * gathered before updating the window for current bridge resource.
+ */
+ for (child = bus->children; child; child = child->sibling) {
+ if (!dev_has_children(child))
+ continue;
+ compute_bridge_resources(child, type_match);
+ }
+
+ /*
+ * Update the window for current bridge resource now that all downstream
+ * requirements are gathered.
+ */
+ update_bridge_resource(bridge, res, type_match);
+ }
+}
+
+/*
+ * During pass 1, resource allocator walks down the entire sub-tree of a domain. It gathers
+ * resource requirements for every downstream bridge by looking at the resource requests of its
+ * children. Thus, the requirement gathering begins at the leaf devices and is propagated back
+ * up to the downstream bridges of the domain.
+ *
+ * At domain level, it identifies every downstream bridge and walks down that bridge to gather
+ * requirements for each resource type i.e. i/o, mem and prefmem. Since bridges have separate
+ * windows for mem and prefmem, requirements for each need to be collected separately.
+ *
+ * Domain resource windows are fixed ranges and hence requirement gathering does not result in
+ * any changes to these fixed ranges.
+ */
+static void compute_domain_resources(const struct device *domain)
+{
+ const struct device *child;
+
+ if (domain->link_list == NULL)
+ return;
+
+ for (child = domain->link_list->children; child; child = child->sibling) {
+
+ /* Skip if this is not a bridge or has no children under it. */
+ if (!dev_has_children(child))
+ continue;
+
+ compute_bridge_resources(child, IORESOURCE_IO);
+ compute_bridge_resources(child, IORESOURCE_MEM);
+ compute_bridge_resources(child, IORESOURCE_MEM | IORESOURCE_PREFETCH);
+ }
+}
+
+static unsigned char get_alignment_by_resource_type(const struct resource *res)
+{
+ if (res->flags & IORESOURCE_MEM)
+ return 12; /* Page-aligned --> log2(4KiB) */
+ else if (res->flags & IORESOURCE_IO)
+ return 0; /* No special alignment required --> log2(1) */
+
+ die("Unexpected resource type: flags(%d)!\n", res->flags);
+}
+
+static void initialize_memranges(struct memranges *ranges, const struct resource *res,
+ unsigned long memrange_type)
+{
+ resource_t res_base;
+ resource_t res_limit;
+ unsigned align = get_alignment_by_resource_type(res);
+
+ memranges_init_empty_with_alignment(ranges, NULL, 0, align);
+
+ if (res == NULL)
+ return;
+
+ res_base = res->base;
+ res_limit = res->limit;
+
+ if (res_base == res_limit)
+ return;
+
+ memranges_insert(ranges, res_base, res_limit - res_base + 1, memrange_type);
+}
+
+static void print_resource_ranges(const struct memranges *ranges)
+{
+ const struct range_entry *r;
+
+ printk(BIOS_INFO, "Resource ranges:\n");
+
+ if (memranges_is_empty(ranges))
+ printk(BIOS_INFO, "EMPTY!!\n");
+
+ memranges_each_entry(r, ranges) {
+ printk(BIOS_INFO, "Base: %llx, Size: %llx, Tag: %lx\n",
+ range_entry_base(r), range_entry_size(r), range_entry_tag(r));
+ }
+}
+
+static void mark_resource_invalid(struct resource *res)
+{
+ res->base = res->limit;
+ res->flags |= IORESOURCE_ASSIGNED;
+}
+
+/*
+ * This is where the actual allocation of resources happens during pass 2. Given the list of
+ * memory ranges corresponding to the resource of given type, it finds the biggest unallocated
+ * resource using the type mask on the downstream bus. This continues in a descending
+ * order until all resources of given type are allocated address space within the current
+ * resource window.
+ *
+ * If a downstream resource cannot be allocated space for any reason, then its base is set to
+ * its limit and flags are updated to indicate that the resource assignment is complete. This is
+ * done to ensure that it does not confuse find_pci_tolm().
+ */
+static void allocate_child_resources(struct bus *bus, struct memranges *ranges,
+ unsigned long type_mask, unsigned long type_match)
+{
+ struct resource *resource = NULL;
+ const struct device *dev;
+
+ while ((dev = largest_resource(bus, &resource, type_mask, type_match))) {
+
+ if (!resource->size) {
+ mark_resource_invalid(resource);
+ continue;
+ }
+
+ if (memranges_steal(ranges, resource->limit, resource->size, resource->align,
+ type_match, &resource->base) == false) {
+ printk(BIOS_ERR, "ERROR: Resource didn't fit!!! ");
+ printk(BIOS_SPEW, "%s %02lx * size: 0x%llx limit: %llx %s\n",
+ dev_path(dev), resource->index,
+ resource->size, resource->limit, resource2str(resource));
+ mark_resource_invalid(resource);
+ continue;
+ }
+
+ resource->limit = resource->base + resource->size - 1;
+ resource->flags |= IORESOURCE_ASSIGNED;
+
+ printk(BIOS_SPEW, "%s %02lx * [0x%llx - 0x%llx] limit: %llx %s\n",
+ dev_path(dev), resource->index, resource->base,
+ resource->size ? resource->base + resource->size - 1 :
+ resource->base, resource->limit, resource2str(resource));
+ }
+}
+
+static void update_constraints(void *gp, struct device *dev, struct resource *res)
+{
+ struct memranges *ranges = gp;
+
+ if (!res->size)
+ return;
+
+ printk(BIOS_SPEW, "%s: %s %02lx base %08llx limit %08llx %s (fixed)\n",
+ __func__, dev_path(dev), res->index, res->base,
+ res->base + res->size - 1, resource2str(res));
+
+ memranges_create_hole(ranges, res->base, res->size);
+}
+
+static void constrain_domain_resources(struct device *domain, struct memranges *ranges,
+ unsigned long type)
+{
+ struct resource *res;
+ struct bus *bus = domain->link_list;
+ unsigned long mask_match = type | IORESOURCE_FIXED;
+
+ /*
+ * Scan the entire tree to identify any fixed resources allocated by any device to
+ * ensure that the address map for domain resources are appropriately updated.
+ *
+ * Domains can typically provide memrange for entire address space. So, this function
+ * punches holes in the address space for all fixed resources that are already
+ * defined. Both IO and normal memory resources are added as fixed. Both need to be
+ * removed from address space where dynamic resource allocations are sourced.
+ */
+ search_bus_resources(bus, mask_match, mask_match, update_constraints, ranges);
+
+ if (type == IORESOURCE_IO) {
+ /*
+ * Don't allow allocations in the VGA I/O range. PCI has special cases for
+ * that.
+ */
+ memranges_create_hole(ranges, 0x3b0, 0x3df);
+
+ /*
+ * Resource allocator no longer supports the legacy behavior where I/O resource
+ * allocation is guaranteed to avoid aliases over legacy PCI expansion card
+ * addresses.
+ */
+ }
+
+ /*
+ * Some domains have fixed resources hanging directly off the device. Avoid those fixed
+ * resources in the address space for alocation.
+ */
+ for (res = domain->resource_list; res != NULL; res = res->next) {
+ if ((res->flags & mask_match) != mask_match)
+ continue;
+ update_constraints(ranges, domain, res);
+ }
+}
+
+/*
+ * This function creates a list of memranges of given type using the resource that is
+ * provided. If the given resource is NULL or if the resource window size is 0, then it creates
+ * an empty list. This results in resource allocation for that resource type failing for all
+ * downstream devices since there is nothing to allocate from.
+ *
+ * In case of domain, it applies additional constraints to ensure that the memranges do not
+ * overlap any of the fixed resources under that domain. Domain typically seems to provide
+ * memrange for entire address space. Thus, it is up to the chipset to add DRAM and all other
+ * windows which cannot be used for resource allocation as fixed resources.
+ */
+static void setup_resource_ranges(struct device *dev, const struct resource *res,
+ unsigned long type, struct memranges *ranges)
+{
+ printk(BIOS_SPEW, "%s %s: base: %llx size: %llx align: %d gran: %d limit: %llx\n",
+ dev_path(dev), resource2str(res), res->base, res->size, res->align,
+ res->gran, res->limit);
+
+ initialize_memranges(ranges, res, type);
+
+ if (dev->path.type == DEVICE_PATH_DOMAIN)
+ constrain_domain_resources(dev, ranges, type);
+
+ print_resource_ranges(ranges);
+}
+
+static void cleanup_resource_ranges(const struct device *dev, struct memranges *ranges,
+ const struct resource *res)
+{
+ memranges_teardown(ranges);
+ printk(BIOS_SPEW, "%s %s: base: %llx size: %llx align: %d gran: %d limit: %llx done\n",
+ dev_path(dev), resource2str(res), res->base, res->size, res->align,
+ res->gran, res->limit);
+}
+
+/*
+ * Pass 2 of resource allocator at the bridge level loops through all the resources for the
+ * bridge and generates a list of memory ranges similar to that at the domain level. However,
+ * there is no need to apply any additional constraints since the window allocated to the bridge
+ * is guaranteed to be non-overlapping by the allocator at domain level.
+ *
+ * Allocation at the bridge level works the same as at domain level (starts with the biggest
+ * resource requirement from downstream devices and continues in descending order). One major
+ * difference at the bridge level is that it considers prefmem resources separately from mem
+ * resources.
+ *
+ * Once allocation at the current bridge is complete, resource allocator continues walking down
+ * the downstream bridges until it hits the leaf devices.
+ */
+static void allocate_bridge_resources(struct device *bridge)
+{
+ struct memranges ranges;
+ const struct resource *res;
+ struct bus *bus = bridge->link_list;
+ unsigned long type_match;
+ struct device *child;
+ const unsigned long type_mask = IORESOURCE_TYPE_MASK | IORESOURCE_PREFETCH;
+
+ for (res = bridge->resource_list; res; res = res->next) {
+ if (!res->size)
+ continue;
+
+ if (!(res->flags & IORESOURCE_BRIDGE))
+ continue;
+
+ type_match = res->flags & type_mask;
+
+ setup_resource_ranges(bridge, res, type_match, &ranges);
+ allocate_child_resources(bus, &ranges, type_mask, type_match);
+ cleanup_resource_ranges(bridge, &ranges, res);
+ }
+
+ for (child = bus->children; child; child = child->sibling) {
+ if (!dev_has_children(child))
+ continue;
+
+ allocate_bridge_resources(child);
+ }
+}
+
+static const struct resource *find_domain_resource(const struct device *domain,
+ unsigned long type)
+{
+ const struct resource *res;
+
+ for (res = domain->resource_list; res; res = res->next) {
+ if (res->flags & IORESOURCE_FIXED)
+ continue;
+
+ if ((res->flags & IORESOURCE_TYPE_MASK) == type)
+ return res;
+ }
+
+ return NULL;
+}
+
+/*
+ * Pass 2 of resource allocator begins at the domain level. Every domain has two types of
+ * resources - io and mem. For each of these resources, this function creates a list of memory
+ * ranges that can be used for downstream resource allocation. This list is constrained to
+ * remove any fixed resources in the domain sub-tree of the given resource type. It then uses
+ * the memory ranges to apply best fit on the resource requirements of the downstream devices.
+ *
+ * Once resources are allocated to all downstream devices of the domain, it walks down each
+ * downstream bridge to continue the same process until resources are allocated to all devices
+ * under the domain.
+ */
+static void allocate_domain_resources(struct device *domain)
+{
+ struct memranges ranges;
+ struct device *child;
+ const struct resource *res;
+
+ /* Resource type I/O */
+ res = find_domain_resource(domain, IORESOURCE_IO);
+ if (res) {
+ setup_resource_ranges(domain, res, IORESOURCE_IO, &ranges);
+ allocate_child_resources(domain->link_list, &ranges, IORESOURCE_TYPE_MASK,
+ IORESOURCE_IO);
+ cleanup_resource_ranges(domain, &ranges, res);
+ }
+
+ /*
+ * Resource type Mem:
+ * Domain does not distinguish between mem and prefmem resources. Thus, the resource
+ * allocation at domain level considers mem and prefmem together when finding the best
+ * fit based on the biggest resource requirement.
+ */
+ res = find_domain_resource(domain, IORESOURCE_MEM);
+ if (res) {
+ setup_resource_ranges(domain, res, IORESOURCE_MEM, &ranges);
+ allocate_child_resources(domain->link_list, &ranges, IORESOURCE_TYPE_MASK,
+ IORESOURCE_MEM);
+ cleanup_resource_ranges(domain, &ranges, res);
+ }
+
+ for (child = domain->link_list->children; child; child = child->sibling) {
+ if (!dev_has_children(child))
+ continue;
+
+ /* Continue allocation for all downstream bridges. */
+ allocate_bridge_resources(child);
+ }
+}
+
+/*
+ * This function forms the guts of the resource allocator. It walks through the entire device
+ * tree for each domain two times.
+ *
+ * Every domain has a fixed set of ranges. These ranges cannot be relaxed based on the
+ * requirements of the downstream devices. They represent the available windows from which
+ * resources can be allocated to the different devices under the domain.
+ *
+ * In order to identify the requirements of downstream devices, resource allocator walks in a
+ * DFS fashion. It gathers the requirements from leaf devices and propagates those back up
+ * to their upstream bridges until the requirements for all the downstream devices of the domain
+ * are gathered. This is referred to as pass 1 of resource allocator.
+ *
+ * Once the requirements for all the devices under the domain are gathered, resource allocator
+ * walks a second time to allocate resources to downstream devices as per the
+ * requirements. It always picks the biggest resource request as per the type (i/o and mem) to
+ * allocate space from its fixed window to the immediate downstream device of the domain. In
+ * order to accomplish best fit for the resources, a list of ranges is maintained by each
+ * resource type (i/o and mem). Domain does not differentiate between mem and prefmem. Since
+ * they are allocated space from the same window, the resource allocator at the domain level
+ * ensures that the biggest requirement is selected indepedent of the prefetch type. Once the
+ * resource allocation for all immediate downstream devices is complete at the domain level,
+ * resource allocator walks down the subtree for each downstream bridge to continue the
+ * allocation process at the bridge level. Since bridges have separate windows for i/o, mem and
+ * prefmem, best fit algorithm at bridge level looks for the biggest requirement considering
+ * prefmem resources separately from non-prefmem resources. This continues until resource
+ * allocation is performed for all downstream bridges in the domain sub-tree. This is referred
+ * to as pass 2 of resource allocator.
+ *
+ * Some rules that are followed by the resource allocator:
+ * - Allocate resource locations for every device as long as the requirements can be satisfied.
+ * - If a resource cannot be allocated any address space, then that resource needs to be
+ * properly updated to ensure that it does not incorrectly overlap some address space reserved
+ * for a different purpose.
+ * - Don't overlap with resources in fixed locations.
+ * - Don't overlap and follow the rules of bridges -- downstream devices of bridges should use
+ * parts of the address space allocated to the bridge.
+ */
+void allocate_resources(const struct device *root)
+{
+ struct device *child;
+
+ if ((root == NULL) || (root->link_list == NULL))
+ return;
+
+ for (child = root->link_list->children; child; child = child->sibling) {
+
+ if (child->path.type != DEVICE_PATH_DOMAIN)
+ continue;
+
+ post_log_path(child);
+
+ /* Pass 1 - Gather requirements. */
+ printk(BIOS_INFO, "Resource allocator: %s - Pass 1 (gathering requirements)\n",
+ dev_path(child));
+ compute_domain_resources(child);
+
+ /* Pass 2 - Allocate resources as per gathered requirements. */
+ printk(BIOS_INFO, "Resource allocator: %s - Pass 2 (allocating resources)\n",
+ dev_path(child));
+ allocate_domain_resources(child);
+ }
+}
To view, visit change 41443. To unsubscribe, or for help writing mail filters, visit settings.