Sindhoor Tilak has uploaded this change for review.

View Change

post_code: reorganize order of postcode defines

Currently, the certain postcode values aren't in increasing
order of values.

The change, just reorganzies the defines in increasing order
of the values

Signed-off-by: Sindhoor Tilak <sindhoor@sin9yt.net>
Change-Id: Id5f0ddc4593f689829ab9a7fdeebd5f66939bf79
---
M src/include/console/post_codes.h
1 file changed, 31 insertions(+), 32 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/42606/1

diff --git a/src/include/console/post_codes.h b/src/include/console/post_codes.h
index 0c6655c..ee74dcb 100644
--- a/src/include/console/post_codes.h
+++ b/src/include/console/post_codes.h
@@ -59,7 +59,6 @@
  */
 #define POST_RAMSTAGE_IS_PREPARED		0x12
 
-
 /**
  * \brief Entry into c_start
  *
@@ -84,21 +83,6 @@
 #define POST_MEM_PREINIT_PREP_END		0x36
 
 /**
- * \brief Pre call to RAM stage main()
- *
- * POSTed right before RAM stage main() is called from c_start.S
- */
-#define POST_PRE_HARDWAREMAIN			0x79
-
-/**
- * \brief Entry into coreboot in RAM stage main()
- *
- * This is the first call in hardwaremain.c. If this code is POSTed, then
- * ramstage has successfully loaded and started executing.
- */
-#define POST_ENTRY_RAMSTAGE			0x80
-
-/**
  * \brief Console is initialized
  *
  * The console is initialized and is ready for usage
@@ -191,6 +175,21 @@
 #define POST_BS_WRITE_TABLES			0x79
 
 /**
+ * \brief Pre call to RAM stage main()
+ *
+ * POSTed right before RAM stage main() is called from c_start.S
+ */
+#define POST_PRE_HARDWAREMAIN			0x79
+
+/**
+ * \brief Entry into coreboot in RAM stage main()
+ *
+ * This is the first call in hardwaremain.c. If this code is POSTed, then
+ * ramstage has successfully loaded and started executing.
+ */
+#define POST_ENTRY_RAMSTAGE			0x80
+
+/**
  * \brief Load Payload
  *
  * Boot State Machine: bs_payload_load()
@@ -303,22 +302,6 @@
 #define POST_FSP_MULTI_PHASE_SI_INIT_EXIT	0xa1
 
 /**
- * \brief Entry into elf boot
- *
- * This POST code is called right before invoking jmp_to_elf_entry()
- * jmp_to_elf_entry() invokes the payload, and should never return
- */
-#define POST_ENTER_ELF_BOOT			0xf8
-
-/**
- * \brief Jumping to payload
- *
- * Called right before jumping to a payload. If the boot sequence stops with
- * this code, chances are the payload freezes.
- */
-#define POST_JUMPING_TO_PAYLOAD			0xf3
-
-/**
  * \brief Invalid or corrupt ROM
  *
  * Set if firmware failed to find or validate a resource that is stored in ROM.
@@ -387,6 +370,22 @@
 #define POST_RESUME_FAILURE			0xef
 
 /**
+ * \brief Jumping to payload
+ *
+ * Called right before jumping to a payload. If the boot sequence stops with
+ * this code, chances are the payload freezes.
+ */
+#define POST_JUMPING_TO_PAYLOAD			0xf3
+
+/**
+ * \brief Entry into elf boot
+ *
+ * This POST code is called right before invoking jmp_to_elf_entry()
+ * jmp_to_elf_entry() invokes the payload, and should never return
+ */
+#define POST_ENTER_ELF_BOOT			0xf8
+
+/**
  * \brief Final code before OS resumes
  *
  * Called right before jumping to the OS resume vector.

To view, visit change 42606. To unsubscribe, or for help writing mail filters, visit settings.