Srinidhi N Kaushik has uploaded this change for review.
vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3373
Update FSP headers for Tiger Lake platform generated based FSP
version 3373. Previous version was 3333.
Changes Includes below UPDs:
ITbtPcieTunnelingForUsb4
SlowSlewRate
FastPkgCRampDisable
BUG=b:
BRANCH=none
TEST=build and boot delbin/tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I2e28905f8f7241940ea92ac3e83b52ff7948953a
---
M src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
M src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
2 files changed, 55 insertions(+), 39 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/30/45630/1
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
index 0b3fe7d..28592cd 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
@@ -2498,7 +2498,7 @@
/** Offset 0x091C - Reserved
**/
- UINT8 Reserved45[4];
+ UINT8 Reserved45[12];
} FSP_M_CONFIG;
/** Fsp M UPD Configuration
@@ -2517,11 +2517,11 @@
**/
FSP_M_CONFIG FspmConfig;
-/** Offset 0x0920
+/** Offset 0x0928
**/
- UINT8 UnusedUpdSpace25[6];
+ UINT8 UnusedUpdSpace27[6];
-/** Offset 0x0926
+/** Offset 0x092E
**/
UINT16 UpdTerminator;
} FSPM_UPD;
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
index 315a0a7..b7ef000 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
@@ -923,9 +923,15 @@
**/
UINT8 D3ColdEnable;
-/** Offset 0x04B9 - Reserved
+/** Offset 0x04B9 - Enable/Disable PCIe tunneling for USB4
+ Enable/Disable PCIe tunneling for USB4, default is enable
+ $EN_DIS
**/
- UINT8 Reserved20[8];
+ UINT8 ITbtPcieTunnelingForUsb4;
+
+/** Offset 0x04BA - Reserved
+**/
+ UINT8 Reserved20[7];
/** Offset 0x04C1 - Enable VMD controller
Enable/disable to VMD controller.0: Disable(Default); 1: Enable
@@ -1186,9 +1192,19 @@
**/
UINT8 AcousticNoiseMitigation;
-/** Offset 0x054B - Reserved
+/** Offset 0x054B - Disable Fast Slew Rate for Deep Package C States for VR domains
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
**/
- UINT8 Reserved28[10];
+ UINT8 FastPkgCRampDisable[5];
+
+/** Offset 0x0550 - Slew Rate configuration for Deep Package C States for VR domains
+ Slew Rate configuration for Deep Package C States for VR domains based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRate[5];
/** Offset 0x0555 - Enable multi phases silicon initialization
A switch to determine MultiPhaseSiInit will be executed or not
@@ -1198,7 +1214,7 @@
/** Offset 0x0556 - Reserved
**/
- UINT8 Reserved29[10];
+ UINT8 Reserved28[10];
/** Offset 0x0560 - AcLoadline
PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
@@ -1247,7 +1263,7 @@
/** Offset 0x05A7 - Reserved
**/
- UINT8 Reserved30;
+ UINT8 Reserved29;
/** Offset 0x05A8 - Enable or Disable TXT
Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
@@ -1278,7 +1294,7 @@
/** Offset 0x05AD - Reserved
**/
- UINT8 Reserved31[3];
+ UINT8 Reserved30[3];
/** Offset 0x05B0 - CpuBistData
Pointer CPU BIST Data
@@ -1299,7 +1315,7 @@
/** Offset 0x05BC - Reserved
**/
- UINT8 Reserved32[16];
+ UINT8 Reserved31[16];
/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number
Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
@@ -1340,7 +1356,7 @@
/** Offset 0x05DE - Reserved
**/
- UINT8 Reserved33[10];
+ UINT8 Reserved32[10];
/** Offset 0x05E8 - Enable Power Optimizer
Enable DMI Power Optimizer on PCH side.
@@ -1360,7 +1376,7 @@
/** Offset 0x05F3 - Reserved
**/
- UINT8 Reserved34;
+ UINT8 Reserved33;
/** Offset 0x05F4 - PCH Protect Range Limit
Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
@@ -1387,7 +1403,7 @@
/** Offset 0x060A - Reserved
**/
- UINT8 Reserved35[3];
+ UINT8 Reserved34[3];
/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned
Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable.
@@ -1452,7 +1468,7 @@
/** Offset 0x0622 - Reserved
**/
- UINT8 Reserved36;
+ UINT8 Reserved35;
/** Offset 0x0623 - RTC Cmos Memory Lock
Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
@@ -1534,7 +1550,7 @@
/** Offset 0x075D - Reserved
**/
- UINT8 Reserved37[7];
+ UINT8 Reserved36[7];
/** Offset 0x0764 - Touch Host Controller Port 1 Assignment
Assign THC Port 1
@@ -1544,7 +1560,7 @@
/** Offset 0x0765 - Reserved
**/
- UINT8 Reserved38[7];
+ UINT8 Reserved37[7];
/** Offset 0x076C - PCIE RP Pcie Speed
Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
@@ -1586,7 +1602,7 @@
/** Offset 0x0814 - Reserved
**/
- UINT8 Reserved39[45];
+ UINT8 Reserved38[45];
/** Offset 0x0841 - PCIE Enable Peer Memory Write
This member describes whether Peer Memory Writes are enabled on the platform.
@@ -1609,7 +1625,7 @@
/** Offset 0x0844 - Reserved
**/
- UINT8 Reserved40[2];
+ UINT8 Reserved39[2];
/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS
When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
@@ -1805,7 +1821,7 @@
/** Offset 0x0899 - Reserved
**/
- UINT8 Reserved41;
+ UINT8 Reserved40;
/** Offset 0x089A - Enable SATA Port DmVal
DEVSLP Idle Timeout (DITO), Default is 625.
@@ -1912,7 +1928,7 @@
/** Offset 0x08C9 - Reserved
**/
- UINT8 Reserved42;
+ UINT8 Reserved41;
/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value
Custimized T0Level value.
@@ -2087,7 +2103,7 @@
/** Offset 0x08EF - Reserved
**/
- UINT8 Reserved43;
+ UINT8 Reserved42;
/** Offset 0x08F0 - Thermal Device Temperature
Decides the temperature.
@@ -2112,7 +2128,7 @@
/** Offset 0x090D - Reserved
**/
- UINT8 Reserved44[3];
+ UINT8 Reserved43[3];
/** Offset 0x0910 - xHCI High Idle Time LTR override
Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting
@@ -2174,7 +2190,7 @@
/** Offset 0x0922 - Reserved
**/
- UINT8 Reserved45[6];
+ UINT8 Reserved44[6];
/** Offset 0x0928 - BgpdtHash[4]
BgpdtHash values
@@ -2188,7 +2204,7 @@
/** Offset 0x094C - Reserved
**/
- UINT8 Reserved46[4];
+ UINT8 Reserved45[4];
/** Offset 0x0950 - BiosGuardModulePtr
BiosGuardModulePtr default values
@@ -2214,7 +2230,7 @@
/** Offset 0x0962 - Reserved
**/
- UINT8 Reserved47[6];
+ UINT8 Reserved46[6];
/** Offset 0x0968 - SgxEpoch0
SgxEpoch0 default values
@@ -2240,7 +2256,7 @@
/** Offset 0x097A - Reserved
**/
- UINT8 Reserved48[6];
+ UINT8 Reserved47[6];
/** Offset 0x0980 - SVID SDID table Poniter.
The address of the table of SVID SDID to customize each SVID SDID entry. This is
@@ -2308,7 +2324,7 @@
/** Offset 0x099D - Reserved
**/
- UINT8 Reserved49[315];
+ UINT8 Reserved48[315];
/** Offset 0x0AD8 - RpPtmBytes
**/
@@ -2316,7 +2332,7 @@
/** Offset 0x0ADC - Reserved
**/
- UINT8 Reserved50[16];
+ UINT8 Reserved49[16];
/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3
Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each
@@ -2427,7 +2443,7 @@
/** Offset 0x0B44 - Reserved
**/
- UINT8 Reserved51[16];
+ UINT8 Reserved50[16];
/** Offset 0x0B54 - 1-Core Ratio Limit
1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
@@ -2709,7 +2725,7 @@
/** Offset 0x0B82 - Reserved
**/
- UINT8 Reserved52;
+ UINT8 Reserved51;
/** Offset 0x0B83 - Enable or Disable Thermal Monitor
Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
@@ -2847,7 +2863,7 @@
/** Offset 0x0BCF - Reserved
**/
- UINT8 Reserved53;
+ UINT8 Reserved52;
/** Offset 0x0BD0 - Platform Power Pmax
PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
@@ -3085,7 +3101,7 @@
/** Offset 0x0C22 - Reserved
**/
- UINT8 Reserved54[17];
+ UINT8 Reserved53[17];
/** Offset 0x0C33 - SgxSinitDataFromTpm
SgxSinitDataFromTpm default values
@@ -3094,7 +3110,7 @@
/** Offset 0x0C34 - Reserved
**/
- UINT8 Reserved55[16];
+ UINT8 Reserved54[16];
/** Offset 0x0C44 - End of Post message
Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
@@ -3228,7 +3244,7 @@
/** Offset 0x0DB9 - Reserved
**/
- UINT8 Reserved56[231];
+ UINT8 Reserved55[239];
} FSP_S_CONFIG;
/** Fsp S UPD Configuration
@@ -3243,11 +3259,11 @@
**/
FSP_S_CONFIG FspsConfig;
-/** Offset 0x0EA0
+/** Offset 0x0EA8
**/
- UINT8 UnusedUpdSpace35[6];
+ UINT8 UnusedUpdSpace34[6];
-/** Offset 0x0EA6
+/** Offset 0x0EAE
**/
UINT16 UpdTerminator;
} FSPS_UPD;
To view, visit change 45630. To unsubscribe, or for help writing mail filters, visit settings.