From X11SSM-F with i2c+vga patches applied:
PCI: 06:00.0 init ...
ASpeed AST2050: initializing video device
ast_detect_chip: AST 2400 detected
ast_detect_chip: VGA not enabled on entry, requesting chip POST
ast_detect_chip: Analog VGA only
ast_driver_load: dram 1632000000 1 16 01000000
software_i2c(0): Trying i2c bus recovery
software_i2c(0): ERROR: Clock stretching timeout before recovery!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
software_i2c(0): ERROR: Clock stretching timeout before stop condition!
WARNING: EDID block does NOT fully conform to EDID 1.3.
Missing name descriptor
Display has 1920px x 1080px
Using framebuffer 1680px x 1050px pitch 6720
ast_get_vbios_mode_info: FB BPP = 32
ast_get_vbios_mode_info: crtc_hdisplay = 1680
ASpeed high resolution framebuffer initialized
PCI: 06:00.0 init finished in 1374298 usecs
To view, visit change 35726. To unsubscribe, or for help writing mail filters, visit settings.