Patrick Georgi (patrick@georgi-clan.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4432
-gerrit
commit a0f2d19bd009a963c414dc37247fca47d3ad311b Author: Ronald G. Minnich rminnich@google.com Date: Thu Aug 1 11:38:05 2013 -0700
Pit: graphics
This includes the new dp code, which is better, and the fimd code, which is changed and improved. We took the chance to remove un-needed files, and also to remove some foolish u-boot habits, but not all of them. That will take time.
With these changes we get graphics.
Since the only mainboards we have with 16 bit graphics are 5:6:5, adjust edid.c to just use that format. If at some future time we need 4:4:4, which seems unlikely, we'll need to add a function to adjust the lb_framebuffer. Note that you can't just divine this from the EDID, as the graphics pipe format need not match the actual final format used.
The EDID reading works. We've been requested to support hard-coded EDIDs and that will come in the next revision. Currently the hard-coded EDID is ignored for testing.
Change-Id: Ib4d06dc3388ab90c834f94808a51133e5b515a4d Signed-off-by: Ronald G. Minnich rminnich@google.com Reviewed-on: https://gerrit.chromium.org/gerrit/64240 Reviewed-by: Stefan Reinauer reinauer@google.com Tested-by: Ronald G. Minnich rminnich@chromium.org Commit-Queue: Gabe Black gabeblack@chromium.org --- src/cpu/samsung/exynos5420/Makefile.inc | 3 +- src/cpu/samsung/exynos5420/clock_init.c | 26 +- src/cpu/samsung/exynos5420/cpu.c | 6 +- src/cpu/samsung/exynos5420/cpu.h | 1 + src/cpu/samsung/exynos5420/dp-core.h | 260 ----- src/cpu/samsung/exynos5420/dp-reg.c | 503 --------- src/cpu/samsung/exynos5420/dp.c | 906 +++++++++++++++ src/cpu/samsung/exynos5420/dp.h | 1778 +++++++++++++++++++++++------- src/cpu/samsung/exynos5420/dp_lowlevel.c | 1199 ++++++++++++++++++++ src/cpu/samsung/exynos5420/fb.c | 587 ---------- src/cpu/samsung/exynos5420/fimd.c | 450 ++++++++ src/cpu/samsung/exynos5420/fimd.h | 161 ++- src/cpu/samsung/exynos5420/power.c | 2 +- src/cpu/samsung/exynos5420/power.h | 2 +- src/lib/edid.c | 10 +- src/mainboard/google/kirby/mainboard.c | 2 +- src/mainboard/google/pit/mainboard.c | 121 +- 17 files changed, 4158 insertions(+), 1859 deletions(-)
diff --git a/src/cpu/samsung/exynos5420/Makefile.inc b/src/cpu/samsung/exynos5420/Makefile.inc index 704a346..4169a2e 100644 --- a/src/cpu/samsung/exynos5420/Makefile.inc +++ b/src/cpu/samsung/exynos5420/Makefile.inc @@ -48,8 +48,7 @@ ramstage-y += monotonic_timer.c ramstage-y += timer.c ramstage-y += gpio.c ramstage-y += i2c.c -ramstage-y += dp-reg.c -ramstage-y += fb.c +ramstage-y += dp.c dp_lowlevel.c fimd.c ramstage-y += usb.c ramstage-y += cbmem.c
diff --git a/src/cpu/samsung/exynos5420/clock_init.c b/src/cpu/samsung/exynos5420/clock_init.c index 2ce975c..069fd8f 100644 --- a/src/cpu/samsung/exynos5420/clock_init.c +++ b/src/cpu/samsung/exynos5420/clock_init.c @@ -30,7 +30,7 @@ void system_clock_init(void) { struct exynos5420_clock *clk = - (struct exynos5420_clock *)EXYNOS5_CLOCK_BASE; + (struct exynos5420_clock *)EXYNOS5420_CLOCK_BASE; struct exynos5_mct_regs *mct_regs = (struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE; u32 val; @@ -49,6 +49,7 @@ void system_clock_init(void) writel(IPLL_LOCK_VAL, &clk->ipll_lock); writel(SPLL_LOCK_VAL, &clk->spll_lock); writel(KPLL_LOCK_VAL, &clk->kpll_lock); + writel(RPLL_LOCK_VAL, &clk->rpll_lock);
setbits_le32(&clk->clk_src_cpu, MUX_HPM_SEL_MASK);
@@ -85,7 +86,7 @@ void system_clock_init(void)
/* Set DPLL */ writel(DPLL_CON1_VAL, &clk->dpll_con1); - val = set_pll(0xc8, 0x2, 0x2); + val = set_pll(0x190, 0x4, 0x2); writel(val, &clk->dpll_con0); while ((readl(&clk->dpll_con0) & PLL_LOCKED) == 0) ; @@ -133,6 +134,22 @@ void system_clock_init(void) while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0) ;
+ /* We use RPLL as the source for FIMD video stream clock */ + writel(RPLL_CON1_VAL, &clk->rpll_con1); + writel(RPLL_CON2_VAL, &clk->rpll_con2); + /* computed by gabe from first principles; u-boot is probably + * wrong again + */ + val = set_pll(0xa0, 0x3, 0x2); + writel(val, &clk->rpll_con0); + /* note: this is a meaningless exercise. The hardware lock + * detection does not work. So this just spins for some + * time and is done. NO indication of success should attach + * to this or any other spin on a con0 value. + */ + while ((readl(&clk->rpll_con0) & PLL_LOCKED) == 0) + ; + writel(CLK_DIV_CDREX0_VAL, &clk->clk_div_cdrex0); writel(CLK_DIV_CDREX1_VAL, &clk->clk_div_cdrex1);
@@ -194,8 +211,3 @@ void clock_gate(void) { /* Not implemented for now. */ } - -void clock_init_dp_clock(void) -{ - /* Not implemented for now. */ -} diff --git a/src/cpu/samsung/exynos5420/cpu.c b/src/cpu/samsung/exynos5420/cpu.c index e95b438..729e6b3 100644 --- a/src/cpu/samsung/exynos5420/cpu.c +++ b/src/cpu/samsung/exynos5420/cpu.c @@ -26,8 +26,8 @@ #include <device/device.h> #include <cbmem.h> #include <arch/cache.h> +#include "dp.h" #include "fimd.h" -#include "dp-core.h" #include "cpu.h" #include "clk.h" #include "usb.h" @@ -138,9 +138,7 @@ static void exynos_displayport_init(device_t dev, u32 lcdbase, dcache_clean_invalidate_by_mva(lower, upper - lower); mmu_config_range(lower / MiB, (upper - lower) / MiB, DCACHE_OFF);
- printk(BIOS_DEBUG, "Initializing Exynos LCD.\n"); - - lcd_ctrl_init(fb_size, &panel, (void *)lcdbase); + mmio_resource(dev, 1, lcdbase/KiB, (fb_size + KiB - 1)/KiB); }
static void cpu_enable(device_t dev) diff --git a/src/cpu/samsung/exynos5420/cpu.h b/src/cpu/samsung/exynos5420/cpu.h index 1cc6e6d..22ef8db 100644 --- a/src/cpu/samsung/exynos5420/cpu.h +++ b/src/cpu/samsung/exynos5420/cpu.h @@ -197,6 +197,7 @@ #define samsung_get_base_clock() ((struct exynos5420_clock *)EXYNOS5_CLOCK_BASE) #define samsung_get_base_ace_sfr() ((struct exynos5_ace_sfr *)EXYNOS5_ACE_SFR_BASE) #define samsung_get_base_dsim() ((struct exynos5_dsim *)EXYNOS5_MIPI_DSI1_BASE) +#define samsung_get_base_dp() ((struct exynos_dp *)EXYNOS5420_DP_BASE) #define samsung_get_base_disp_ctrl() ((struct exynos5_disp_ctrl *)EXYNOS5_DISP1_CTRL_BASE) #define samsung_get_base_fimd() ((struct exynos5_fimd *)EXYNOS5_FIMD_BASE) #define samsung_get_base_pro_id() ((struct exynos5_pro_id *)EXYNOS5_PRO_ID) diff --git a/src/cpu/samsung/exynos5420/dp-core.h b/src/cpu/samsung/exynos5420/dp-core.h deleted file mode 100644 index 62144e3..0000000 --- a/src/cpu/samsung/exynos5420/dp-core.h +++ /dev/null @@ -1,260 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * Copyright (C) 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Header file for Samsung DP (Display Port) interface driver. */ - -#ifndef CPU_SAMSUNG_EXYNOS5420_DP_CORE_H -#define CPU_SAMSUNG_EXYNOS5420_DP_CORE_H - -#define STREAM_ON_TIMEOUT 100 -#define PLL_LOCK_TIMEOUT 10 -#define DP_INIT_TRIES 10 -#define MAX_CR_LOOP 5 -#define MAX_EQ_LOOP 4 - -/* Link tare type */ -enum link_rate { - LINK_RATE_1_62GBPS = 0x06, - LINK_RATE_2_70GBPS = 0x0a -}; - -/* Number of lanes supported */ -enum link_lane_count { - LANE_COUNT1 = 1, - LANE_COUNT2 = 2, - LANE_COUNT4 = 4 -}; - -/* Pre emphasis level */ -enum pre_emphasis_level { - PRE_EMPHASIS_LEVEL_0, - PRE_EMPHASIS_LEVEL_1, - PRE_EMPHASIS_LEVEL_2, - PRE_EMPHASIS_LEVEL_3, -}; - -/* Type of color space */ -enum color_space { - COLOR_RGB, - COLOR_YCBCR422, - COLOR_YCBCR444 -}; - -/* Video input Bit Per Color */ -enum color_depth { - COLOR_6, - COLOR_8, - COLOR_10, - COLOR_12 -}; - -/* Type of YCbCr coefficient */ -enum color_coefficient { - COLOR_YCBCR601, - COLOR_YCBCR709 -}; - -/* Color range */ -enum dynamic_range { - VESA, - CEA -}; - -/* Status of PLL clock */ -enum pll_status { - PLL_UNLOCKED, - PLL_LOCKED -}; - -/* To choose type of m_value */ -enum clock_recovery_m_value_type { - CALCULATED_M, - REGISTER_M -}; - -struct video_info { - enum color_space color_space; - enum dynamic_range dynamic_range; - enum color_coefficient ycbcr_coeff; - enum color_depth color_depth; - - enum link_rate link_rate; - enum link_lane_count lane_count; - - char *name; - - unsigned int h_sync_polarity:1; - unsigned int v_sync_polarity:1; - unsigned int interlaced:1; -}; - -struct link_train { - u8 link_rate; - u8 lane_count; -}; - -struct s5p_dp_device { - unsigned int irq; - struct exynos5_dp *base; - struct video_info *video_info; - struct link_train link_train; -}; - -/* s5p_dp_reg.c */ - -/* - * Reset DP module - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_reset(struct s5p_dp_device *dp); -/* - * Initialize DP to recieve video stream - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_init_video(struct s5p_dp_device *dp); -/* - * Check whether PLL is locked - * - * param dp pointer to main s5p-dp structure - * return Lock status - */ -unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp); -/* - * Initialize analog functions of DP - * - * param dp pointer to main s5p-dp structure - * return 0 on success - */ -int s5p_dp_init_analog_func(struct s5p_dp_device *dp); -/* - * Initialize DP for AUX transaction - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_init_aux(struct s5p_dp_device *dp); - -/* - * Start an AUX transaction. - * - * param dp pointer to main s5p-dp structure - */ -int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp); - -/* - * Write a byte to DPCD register - * - * param dp pointer to main s5p-dp structure - * param reg_addr DPCD register to be written - * param data byte data to be written - * return write status - */ -int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char data); -/* - * Read a byte from DPCD register - * - * param dp pointer to main s5p-dp structure - * param reg_addr DPCD register to read - * param data read byte data - * return read status - */ -int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char *data); -/* - * Initialize DP video functions - * - * param dp pointer to main s5p-dp structure - */ -//void s5p_dp_init_video(struct s5p_dp_device *dp); - -/* - * Set color parameters for display - * - * param dp pointer to main s5p-dp structure - * param color_depth Video input Bit Per Color - * param color_space Colorimetric format of input video - * param dynamic_range VESA range or CEA range - * param coeff YCbCr Coefficients of input video - */ -void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, - unsigned int color_depth, - unsigned int color_space, - unsigned int dynamic_range, - unsigned int coeff); -/* - * Check whether video clock is on - * - * param dp pointer to main s5p-dp structure - * return clock status - */ -int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp); -/* - * Check whether video clock is on - * - * param dp pointer to main s5p-dp structure - * param type clock_recovery_m_value_type - * param m_value to caluculate m_vid value - * param n_value to caluculate n_vid value - */ -void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, - enum clock_recovery_m_value_type type, - unsigned int m_value, - unsigned int n_value); -/* - * Set DP to video slave mode thereby enabling video master - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_enable_video_master(struct s5p_dp_device *dp); -/* - * Check whether video stream is on - * - * param dp pointer to main s5p-dp structure - * return video stream status - */ -int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp); -/* - * Configure DP in slave mode - * - * param dp pointer to main s5p-dp structure - * param video_info pointer to main video_info structure. - */ -void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, - struct video_info *video_info); - -/* - * Wait unitl HW link training done - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp); - -/* startup and init */ -struct exynos5_fimd_panel; -void fb_init(unsigned long int fb_size, void *lcdbase, - struct exynos5_fimd_panel *pd); -int dp_controller_init(struct s5p_dp_device *dp_device); -int lcd_ctrl_init(unsigned long int fb_size, - struct exynos5_fimd_panel *panel_data, void *lcdbase); -#endif /* CPU_SAMSUNG_EXYNOS5420_DP_CORE_H */ diff --git a/src/cpu/samsung/exynos5420/dp-reg.c b/src/cpu/samsung/exynos5420/dp-reg.c deleted file mode 100644 index 1d6a6b1..0000000 --- a/src/cpu/samsung/exynos5420/dp-reg.c +++ /dev/null @@ -1,503 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Samsung DP (Display port) register interface driver. */ - -#include <console/console.h> -#include <arch/io.h> -#include <delay.h> -#include <timer.h> -#include "clk.h" -#include "cpu.h" -#include "periph.h" -#include "dp.h" -#include "fimd.h" -#include "dp-core.h" - -void s5p_dp_reset(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - writel(RESET_DP_TX, &base->dp_tx_sw_reset); - - /* Stop Video */ - clrbits_le32(&base->video_ctl_1, VIDEO_EN); - clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); - - reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | - AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | - HDCP_FUNC_EN_N | SW_FUNC_EN_N; - writel(reg, &base->func_en_1); - - reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N | - SERDES_FIFO_FUNC_EN_N | - LS_CLK_DOMAIN_FUNC_EN_N; - writel(reg, &base->func_en_2); - - udelay(20); - - reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 | - LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0; - - writel(reg, &base->lane_map); - - writel(0x0, &base->sys_ctl_1); - writel(0x40, &base->sys_ctl_2); - writel(0x0, &base->sys_ctl_3); - writel(0x0, &base->sys_ctl_4); - - writel(0x0, &base->pkt_send_ctl); - writel(0x0, &base->dp_hdcp_ctl); - - writel(0x5e, &base->dp_hpd_deglitch_l); - writel(0x1a, &base->dp_hpd_deglitch_h); - - writel(0x10, &base->dp_debug_ctl); - - writel(0x0, &base->dp_phy_test); - - writel(0x0, &base->dp_video_fifo_thrd); - writel(0x20, &base->dp_audio_margin); - - writel(0x4, &base->m_vid_gen_filter_th); - writel(0x2, &base->m_aud_gen_filter_th); - - writel(0x00000101, &base->soc_general_ctl); - - /* Set Analog Parameters */ - writel(0x10, &base->analog_ctl_1); - writel(0x0C, &base->analog_ctl_2); - writel(0x85, &base->analog_ctl_3); - writel(0x66, &base->pll_filter_ctl_1); - writel(0x0, &base->tx_amp_tuning_ctl); - - /* Set interrupt pin assertion polarity as high */ - writel(INT_POL0 | INT_POL1, &base->int_ctl); - - /* Clear pending regisers */ - writel(0xff, &base->common_int_sta_1); - writel(0x4f, &base->common_int_sta_2); - writel(0xe0, &base->common_int_sta_3); - writel(0xe7, &base->common_int_sta_4); - writel(0x63, &base->dp_int_sta); - - /* 0:mask,1: unmask */ - writel(0x00, &base->common_int_mask_1); - writel(0x00, &base->common_int_mask_2); - writel(0x00, &base->common_int_mask_3); - writel(0x00, &base->common_int_mask_4); - writel(0x00, &base->int_sta_mask); -} - -unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp) -{ - u32 reg; - - reg = readl(&dp->base->dp_debug_ctl); - if (reg & PLL_LOCK) - return PLL_LOCKED; - else - return PLL_UNLOCKED; -} - -int s5p_dp_init_analog_func(struct s5p_dp_device *dp) -{ - u32 reg; - struct mono_time current, end; - struct exynos5_dp *base = dp->base; - - writel(0x00, &base->dp_phy_pd); - - reg = PLL_LOCK_CHG; - writel(reg, &base->common_int_sta_1); - - clrbits_le32(&base->dp_debug_ctl, (F_PLL_LOCK | PLL_LOCK_CTRL)); - - /* Power up PLL */ - if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - - clrbits_le32(&base->dp_pll_ctl, DP_PLL_PD); - - timer_monotonic_get(¤t); - end = current; - mono_time_add_msecs(&end, PLL_LOCK_TIMEOUT); - - while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - if (mono_time_after(¤t, &end)) { - printk(BIOS_ERR, "%s: PLL is not locked\n", - __func__); - return -1; - } - timer_monotonic_get(¤t); - } - } - - /* Enable Serdes FIFO function and Link symbol clock domain module */ - clrbits_le32(&base->func_en_2, (SERDES_FIFO_FUNC_EN_N | - LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N)); - return 0; -} - -void s5p_dp_init_aux(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - /* Clear inerrupts related to AUX channel */ - reg = RPLY_RECEIV | AUX_ERR; - writel(reg, &base->dp_int_sta); - - /* Disable AUX channel module */ - setbits_le32(&base->func_en_2, AUX_FUNC_EN_N); - - /* Disable AUX transaction H/W retry */ - reg = (3 & AUX_BIT_PERIOD_MASK) << AUX_BIT_PERIOD_SHIFT; - reg |= (0 & AUX_HW_RETRY_COUNT_MASK) << AUX_HW_RETRY_COUNT_SHIFT; - reg |= (AUX_HW_RETRY_INTERVAL_600_US << AUX_HW_RETRY_INTERVAL_SHIFT); - writel(reg, &base->aux_hw_retry_ctl) ; - - /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ - reg = DEFER_CTRL_EN; - reg |= (1 & DEFER_COUNT_MASK) << DEFER_COUNT_SHIFT; - writel(reg, &base->aux_ch_defer_dtl); - - /* Enable AUX channel module */ - clrbits_le32(&base->func_en_2, AUX_FUNC_EN_N); -} - -int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp) -{ - int reg; - struct exynos5_dp *base = dp->base; - - /* Enable AUX CH operation */ - setbits_le32(&base->aux_ch_ctl_2, AUX_EN); - - /* Is AUX CH command reply received? */ - reg = readl(&base->dp_int_sta); - while (!(reg & RPLY_RECEIV)) - reg = readl(&base->dp_int_sta); - - /* Clear interrupt source for AUX CH command reply */ - writel(RPLY_RECEIV, &base->dp_int_sta); - - /* Clear interrupt source for AUX CH access error */ - reg = readl(&base->dp_int_sta); - if (reg & AUX_ERR) { - printk(BIOS_ERR, "%s: AUX_ERR encountered, dp_int_sta: " - "0x%02x\n", __func__, reg); - writel(AUX_ERR, &base->dp_int_sta); - return -1; - } - - /* Check AUX CH error access status */ - reg = readl(&base->dp_int_sta); - if ((reg & AUX_STATUS_MASK) != 0) { - printk(BIOS_ERR, "AUX CH error happens: %d\n\n", - reg & AUX_STATUS_MASK); - return -1; - } - - return 0; -} - -int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char data) -{ - u32 reg; - int i; - int retval; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { - /* Clear AUX CH data buffer */ - writel(BUF_CLR, &base->buf_data_ctl); - - /* Select DPCD device address */ - reg = reg_addr >> AUX_ADDR_7_0_SHIFT; - reg &= AUX_ADDR_7_0_MASK; - writel(reg, &base->aux_addr_7_0); - reg = reg_addr >> AUX_ADDR_15_8_SHIFT; - reg &= AUX_ADDR_15_8_MASK; - writel(reg, &base->aux_addr_15_8); - reg = reg_addr >> AUX_ADDR_19_16_SHIFT; - reg &= AUX_ADDR_19_16_MASK; - writel(reg, &base->aux_addr_19_16); - - /* Write data buffer */ - reg = (unsigned int)data; - writel(reg, &base->buf_data_0); - - /* - * Set DisplayPort transaction and write 1 byte - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; - writel(reg, &base->aux_ch_ctl_1); - - /* Start AUX transaction */ - retval = s5p_dp_start_aux_transaction(dp); - if (retval == 0) - break; - else - printk(BIOS_DEBUG, "Aux Transaction fail!\n"); - } - - return retval; -} - -int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char *data) -{ - u32 reg; - int i; - int retval; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { - /* Clear AUX CH data buffer */ - writel(BUF_CLR, &base->buf_data_ctl); - - /* Select DPCD device address */ - reg = reg_addr >> AUX_ADDR_7_0_SHIFT; - reg &= AUX_ADDR_7_0_MASK; - writel(reg, &base->aux_addr_7_0); - reg = reg_addr >> AUX_ADDR_15_8_SHIFT; - reg &= AUX_ADDR_15_8_MASK; - writel(reg, &base->aux_addr_15_8); - reg = reg_addr >> AUX_ADDR_19_16_SHIFT; - reg &= AUX_ADDR_19_16_MASK; - writel(reg, &base->aux_addr_19_16); - - /* - * Set DisplayPort transaction and read 1 byte - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; - writel(reg, &base->aux_ch_ctl_1); - - /* Start AUX transaction */ - retval = s5p_dp_start_aux_transaction(dp); - if (retval == 0) - break; - else - printk(BIOS_DEBUG, "Aux Transaction fail!\n"); - } - - /* Read data buffer */ - if (!retval) { - reg = readl(&base->buf_data_0); - *data = (unsigned char)(reg & 0xff); - } - - return retval; -} - -void s5p_dp_init_video(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; - writel(reg, &base->common_int_sta_1); - - reg = 0x0; - writel(reg, &base->sys_ctl_1); - - reg = (4 & CHA_CRI_MASK) << CHA_CRI_SHIFT; - reg |= CHA_CTRL; - writel(reg, &base->sys_ctl_2); - - reg = 0x0; - writel(reg, &base->sys_ctl_3); -} - -void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, - unsigned int color_depth, - unsigned int color_space, - unsigned int dynamic_range, - unsigned int coeff) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - /* Configure the input color depth, color space, dynamic range */ - reg = (dynamic_range << IN_D_RANGE_SHIFT) | - (color_depth << IN_BPC_SHIFT) | - (color_space << IN_COLOR_F_SHIFT); - writel(reg, &base->video_ctl_2); - - /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ - reg = readl(&base->video_ctl_3); - reg &= ~IN_YC_COEFFI_MASK; - if (coeff) - reg |= IN_YC_COEFFI_ITU709; - else - reg |= IN_YC_COEFFI_ITU601; - writel(reg, &base->video_ctl_3); -} - -int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->sys_ctl_1); - writel(reg, &base->sys_ctl_1); - - reg = readl(&base->sys_ctl_1); - - if (!(reg & DET_STA)) - return -1; - - reg = readl(&base->sys_ctl_2); - writel(reg, &base->sys_ctl_2); - - reg = readl(&base->sys_ctl_2); - - if (reg & CHA_STA) { - printk(BIOS_DEBUG, "Input stream clk is changing\n"); - return -1; - } - - return 0; -} - -void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, - enum clock_recovery_m_value_type type, - unsigned int m_value, - unsigned int n_value) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - if (type == REGISTER_M) { - setbits_le32(&base->sys_ctl_4, FIX_M_VID); - - reg = m_value >> M_VID_0_VALUE_SHIFT; - writel(reg, &base->m_vid_0); - - reg = (m_value >> M_VID_1_VALUE_SHIFT); - writel(reg, &base->m_vid_1); - - reg = (m_value >> M_VID_2_VALUE_SHIFT); - writel(reg, &base->m_vid_2); - - reg = n_value >> N_VID_0_VALUE_SHIFT; - writel(reg, &base->n_vid_0); - - reg = (n_value >> N_VID_1_VALUE_SHIFT); - writel(reg, &base->n_vid_1); - - reg = (n_value >> N_VID_2_VALUE_SHIFT); - writel(reg, &base->n_vid_2); - } else { - clrbits_le32(&base->sys_ctl_4, FIX_M_VID); - - writel(0x00, &base->n_vid_0); - writel(0x80, &base->n_vid_1); - writel(0x00, &base->n_vid_2); - } -} - -void s5p_dp_enable_video_master(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->soc_general_ctl); - reg &= ~VIDEO_MODE_MASK; - reg |= VIDEO_MODE_SLAVE_MODE; - writel(reg, &base->soc_general_ctl); -} - -int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp) -{ - u32 reg, i = 0; - struct mono_time current, end; - struct exynos5_dp *base = dp->base; - - /* Wait for 4 VSYNC_DET interrupts */ - timer_monotonic_get(¤t); - end = current; - mono_time_add_msecs(&end, STREAM_ON_TIMEOUT); - - do { - reg = readl(&base->common_int_sta_1); - if (reg & VSYNC_DET) { - i++; - writel(reg | VSYNC_DET, &base->common_int_sta_1); - } - if (i == 4) - break; - timer_monotonic_get(¤t); - } while (mono_time_before(¤t, &end)); - - if (i != 4) { - printk(BIOS_DEBUG, "s5p_dp_is_video_stream_on timeout\n"); - return -1; - } - - return 0; -} - -void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, - struct video_info *video_info) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->func_en_1); - reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); - reg |= MASTER_VID_FUNC_EN_N; - writel(reg, &base->func_en_1); - - reg = readl(&base->video_ctl_10); - reg &= ~INTERACE_SCAN_CFG; - reg |= (video_info->interlaced << 2); - writel(reg, &base->video_ctl_10); - - reg = readl(&base->video_ctl_10); - reg &= ~VSYNC_POLARITY_CFG; - reg |= (video_info->v_sync_polarity << 1); - writel(reg, &base->video_ctl_10); - - reg = readl(&base->video_ctl_10); - reg &= ~HSYNC_POLARITY_CFG; - reg |= (video_info->h_sync_polarity << 0); - writel(reg, &base->video_ctl_10); - - reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; - writel(reg, &base->soc_general_ctl); -} - -void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->dp_hw_link_training); - while (reg & HW_TRAINING_EN) - reg = readl(&base->dp_hw_link_training); -} diff --git a/src/cpu/samsung/exynos5420/dp.c b/src/cpu/samsung/exynos5420/dp.c new file mode 100644 index 0000000..a1c69c5 --- /dev/null +++ b/src/cpu/samsung/exynos5420/dp.c @@ -0,0 +1,906 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee dh09.lee@samsung.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <arch/io.h> +#include <stdlib.h> +#include <string.h> +#include <timer.h> +#include <delay.h> +#include <console/console.h> +#include <lib.h> +#include "timer.h" +#include "cpu.h" +#include "power.h" +#include "sysreg.h" +#include <drivers/maxim/max77686/max77686.h> + +#include "device/i2c.h" +#include "i2c.h" +#include "fimd.h" +#include "dp.h" + +/* + * Here is the rough outline of how we bring up the display: + * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD + * 2. Source determines video mode by reading DPCD receiver capability field + * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD + * 0000Dh). + * 3. Sink replies DPCD receiver capability field. + * 4. Source starts EDID read thru I2C-over-AUX. + * 5. Sink replies EDID thru I2C-over-AUX. + * 6. Source determines link configuration, such as MAX_LINK_RATE and + * MAX_LANE_COUNT. Source also determines which type of eDP Authentication + * method to use and writes DPCD link configuration field (DPCD 00100h to + * 0010Ah) including eDP configuration set (DPCD 0010Ah). + * 7. Source starts link training. Sink does clock recovery and equalization. + * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). + * 9. Sink replies DPCD link status field. If main link is not stable, Source + * repeats Step 7. + * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video + * parameters and recovers stream clock. + * 11. Source sends video data. + */ + + +static int exynos_dp_init_dp(void) +{ + int ret; + exynos_dp_reset(); + + /* SW defined function Normal operation */ + exynos_dp_enable_sw_func(DP_ENABLE); + + ret = exynos_dp_init_analog_func(); + if (ret != EXYNOS_DP_SUCCESS) + return ret; + + exynos_dp_init_hpd(); + exynos_dp_init_aux(); + + return ret; +} + +static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data) +{ + int i; + unsigned char sum = 0; + + for (i = 0; i < EDID_BLOCK_LENGTH; i++) + sum = sum + edid_data[i]; + + return sum; +} + +static unsigned int exynos_dp_read_edid(void) +{ + unsigned char edid[EDID_BLOCK_LENGTH * 2]; + unsigned int extend_block = 0; + unsigned char sum; + unsigned char test_vector; + int retval = 0; + + /* + * EDID device address is 0x50. + * However, if necessary, you must have set upper address + * into E-EDID in I2C device, 0x30. + */ + + /* Read Extension Flag, Number of 128-byte EDID extension blocks */ + if (exynos_dp_read_byte_from_i2c + (I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG, &extend_block)) + return -1; + + if (extend_block > 0) { + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + + if (retval != 0) { + printk(BIOS_ERR, "DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printk(BIOS_ERR, "DP EDID bad checksum!\n"); + return -1; + } + /* Read additional EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_BLOCK_LENGTH, + EDID_BLOCK_LENGTH, + &edid[EDID_BLOCK_LENGTH]); + if (retval != 0) { + printk(BIOS_ERR, "DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); + if (sum != 0) { + printk(BIOS_ERR, "DP EDID bad checksum!\n"); + return -1; + } + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } else { + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + + if (retval != 0) { + printk(BIOS_ERR, "DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printk(BIOS_ERR, "DP EDID bad checksum!\n"); + return -1; + } + + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + + } + + return 0; +} + +static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info) +{ + unsigned char buf[12]; + unsigned int ret; + unsigned char temp; + unsigned char retry_cnt; + unsigned char dpcd_rev[16]; + unsigned char lane_bw[16]; + unsigned char lane_cnt[16]; + + memset(dpcd_rev, 0, sizeof(dpcd_rev)); + memset(lane_bw, 0, sizeof(lane_bw)); + memset(lane_cnt, 0, sizeof(lane_cnt)); + memset(buf, 0, sizeof(buf)); + + retry_cnt = 5; + while (retry_cnt) { + /* Read DPCD 0x0000-0x000b */ + ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP read_byte_from_dpcd() failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + /* */ + temp = buf[DPCD_DPCD_REV]; + if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11) + edp_info->dpcd_rev = temp; + else { + printk(BIOS_ERR, "DP Wrong DPCD Rev : %x\n", temp); + return -1; + } + temp = buf[DPCD_MAX_LINK_RATE]; + if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70) + edp_info->lane_bw = temp; + else { + printk(BIOS_ERR, "DP Wrong MAX LINK RATE : %x\n", temp); + return -1; + } + /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */ + if (edp_info->dpcd_rev == DP_DPCD_REV_11) { + temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f; + if (buf[DPCD_MAX_LANE_COUNT] & 0x80) + edp_info->dpcd_efc = 1; + else + edp_info->dpcd_efc = 0; + } else { + temp = buf[DPCD_MAX_LANE_COUNT]; + edp_info->dpcd_efc = 0; + } + + if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 || + temp == DP_LANE_CNT_4) { + edp_info->lane_cnt = temp; + } else { + printk(BIOS_ERR, "DP Wrong MAX LANE COUNT : %x\n", temp); + return -1; + } + + ret = exynos_dp_read_edid(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP exynos_dp_read_edid() failed\n"); + return -1; + } + + return ret; +} + +static void exynos_dp_init_training(void) +{ + /* + * MACRO_RST must be applied after the PLL_LOCK to avoid + * the DP inter pair skew issue for at least 10 us + */ + exynos_dp_reset_macro(); + + /* All DP analog module power up */ + exynos_dp_set_analog_power_down(POWER_ALL, 0); +} + +static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info) +{ + unsigned char buf[5]; + unsigned int ret; + + edp_info->lt_info.lt_status = DP_LT_CR; + edp_info->lt_info.ep_loop = 0; + edp_info->lt_info.cr_loop[0] = 0; + edp_info->lt_info.cr_loop[1] = 0; + edp_info->lt_info.cr_loop[2] = 0; + edp_info->lt_info.cr_loop[3] = 0; + + /* Set sink to D0 (Sink Not Ready) mode. */ + ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE, + DPCD_SET_POWER_STATE_D0); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_dpcd_byte failed\n"); + return ret; + } + + /* Set link rate and count as you want to establish*/ + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + /* Setup RX configuration */ + buf[0] = edp_info->lane_bw; + buf[1] = edp_info->lane_cnt; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_dpcd_byte failed\n"); + return ret; + } + + exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0, + edp_info->lane_cnt); + + /* Set training pattern 1 */ + exynos_dp_set_training_pattern(TRAINING_PTN1); + + /* Set RX training pattern */ + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1; + + buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET, + 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_dpcd_byte failed\n"); + return ret; + } + return ret; +} + +static unsigned int exynos_dp_training_pattern_dis(void) +{ + unsigned int ret; + + exynos_dp_set_training_pattern(DP_NONE); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + DPCD_TRAINING_PATTERN_DISABLED); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP requst_link_traninig_req failed\n"); + return -1; + } + + return ret; +} + +static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable) +{ + unsigned char data; + unsigned int ret; + + ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET, + &data); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read_from_dpcd failed\n"); + return -1; + } + + if (enable) + data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data); + else + data = DPCD_LN_COUNT_SET(data); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET, + data); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write_to_dpcd failed\n"); + return -1; + + } + + return ret; +} + +static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode) +{ + unsigned int ret; + + ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP rx_enhance_mode failed\n"); + return -1; + } + + exynos_dp_enable_enhanced_mode(enhance_mode); + + return ret; +} + +static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info, + unsigned char *status) +{ + unsigned int ret, i; + unsigned char buf[2]; + unsigned char lane_stat[DP_LANE_CNT_4] = {0,}; + const unsigned char shift_val[] = {0, 4, 0, 4}; + + ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read lane status failed\n"); + return ret; + } + + for (i = 0; i < edp_info->lane_cnt; i++) { + lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f; + if (lane_stat[0] != lane_stat[i]) { + printk(BIOS_ERR, "Wrong lane status\n"); + return -1; + } + } + + *status = lane_stat[0]; + + return ret; +} + +static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num, + unsigned char *sw, unsigned char *em) +{ + const unsigned char shift_val[] = {0, 4, 0, 4}; + unsigned int ret; + unsigned char buf; + unsigned int dpcd_addr; + + /*lane_num value is used as arry index, so this range 0 ~ 3 */ + dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2); + + ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read adjust request failed\n"); + return -1; + } + + *sw = ((buf >> shift_val[lane_num]) & 0x03); + *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2; + + return ret; +} + +static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info) +{ + int ret; + + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP training_patter_disable() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP set_enhanced_mode() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info) +{ + int ret; + + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + edp_info->lane_bw = DP_LANE_BW_1_62; + printk(BIOS_ERR, "DP Change lane bw to 1.62Gbps\n"); + edp_info->lt_info.lt_status = DP_LT_START; + ret = EXYNOS_DP_SUCCESS; + } else { + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) + printk(BIOS_ERR, "DP training_patter_disable() failed\n"); + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) + printk(BIOS_ERR, "DP set_enhanced_mode() failed\n"); + + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info + *edp_info) +{ + unsigned int ret; + unsigned char lane_stat; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, }; + unsigned int i; + unsigned char adj_req_sw; + unsigned char adj_req_em; + unsigned char buf[5]; + + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + printk(BIOS_DEBUG,"DP clock Recovery training succeed\n"); + exynos_dp_set_training_pattern(TRAINING_PTN2); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw, + &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) + || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2; + buf[1] = lt_ctl_val[0]; + buf[2] = lt_ctl_val[1]; + buf[3] = lt_ctl_val[2]; + buf[4] = lt_ctl_val[3]; + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_PATTERN_SET, 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write training pattern1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } else + edp_info->lt_info.lt_status = DP_LT_ET; + } else { + for (i = 0; i < edp_info->lane_cnt; i++) { + lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i); + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read adj req failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) + ret = exynos_dp_reduce_link_rate(edp_info); + + if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) == + adj_req_sw) && + (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) == + adj_req_em)) { + edp_info->lt_info.cr_loop[i]++; + if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP) + ret = exynos_dp_reduce_link_rate( + edp_info); + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP write training pattern2 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + } + + return ret; +} + +static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info + *edp_info) +{ + unsigned int ret; + unsigned char lane_stat, adj_req_sw, adj_req_em, i; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,}; + unsigned char interlane_aligned = 0; + unsigned char f_bw; + unsigned char f_lane_cnt; + unsigned char sink_stat; + + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + printk(BIOS_DEBUG,"DP lane stat : %x\n", lane_stat); + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + printk(BIOS_DEBUG, "DP_LANE_STAT_CR_DONE ok\n"); + ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED, + &sink_stat); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + printk(BIOS_ERR, "DP read DPCD_LN_ALIGN_UPDATED failed\n"); + return ret; + } + + interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE); + printk(BIOS_DEBUG, "interlane_aligned: %d\n", interlane_aligned); + printk(BIOS_DEBUG, "Check %d lanes\n", edp_info->lane_cnt); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP read adj req 1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3; + lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3; + } + } + + if (((lane_stat&DP_LANE_STAT_CE_DONE) && + (lane_stat&DP_LANE_STAT_SYM_LOCK)) + && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) { + printk(BIOS_DEBUG,"DP Equalizer training succeed\n"); + + f_bw = exynos_dp_get_link_bandwidth(); + f_lane_cnt = exynos_dp_get_lane_count(); + + printk(BIOS_DEBUG,"DP final BandWidth : %x\n", f_bw); + printk(BIOS_DEBUG,"DP final Lane Count : %x\n", f_lane_cnt); + + edp_info->lt_info.lt_status = DP_LT_FINISHED; + + exynos_dp_equalizer_err_link(edp_info); + + } else { + edp_info->lt_info.ep_loop++; + + if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) { + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate( + edp_info); + } else { + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } else { + for (i = 0; i < edp_info->lane_cnt; i++) + exynos_dp_set_lanex_pre_emphasis( + lt_ctl_val[i], i); + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, + 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP set lt pattern failed\n"); + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } + } + } else if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate(edp_info); + } else { + edp_info->lt_info.lt_status = DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + + return ret; +} + +static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info) +{ + /* the C compiler is almost smart enough to know this gets set. + * But not quite. + */ + unsigned int ret = 0; + int training_finished; + + /* Turn off unnecessary lane */ + if (edp_info->lane_cnt == 1) + exynos_dp_set_analog_power_down(CH1_BLOCK, 1); + + training_finished = 0; + + edp_info->lt_info.lt_status = DP_LT_START; + + /* Process here */ + while (!training_finished) { + switch (edp_info->lt_info.lt_status) { + case DP_LT_START: + ret = exynos_dp_link_start(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP LT:link start failed\n"); + training_finished = 1; + } + break; + case DP_LT_CR: + ret = exynos_dp_process_clock_recovery(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP LT:clock recovery failed\n"); + training_finished = 1; + } + break; + case DP_LT_ET: + ret = exynos_dp_process_equalizer_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP LT:equalizer training failed\n"); + training_finished = 1; + } + break; + case DP_LT_FINISHED: + training_finished = 1; + break; + case DP_LT_FAIL: + printk(BIOS_ERR,"DP: %s: DP_LT_FAIL: failed\n", __func__); + training_finished = 1; + ret = -1; + } + } + + return ret; +} + +static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info) +{ + unsigned int ret; + + exynos_dp_init_training(); + + ret = exynos_dp_sw_link_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) + printk(BIOS_ERR, "DP dp_sw_link_traning() failed\n"); + + return ret; +} + +static void exynos_dp_enable_scramble(unsigned int enable) +{ + unsigned char data; + + if (enable) { + exynos_dp_enable_scrambling(DP_ENABLE); + + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data & ~DPCD_SCRAMBLING_DISABLED)); + } else { + exynos_dp_enable_scrambling(DP_DISABLE); + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data | DPCD_SCRAMBLING_DISABLED)); + } +} + +static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info) +{ + unsigned int ret = 0; + unsigned int retry_cnt; + + mdelay(1); + + if (edp_info->video_info.master_mode) { + printk(BIOS_ERR, + "DP does not support master mode: bailing out\n"); + return -1; + } else { + /* debug slave */ + exynos_dp_config_video_slave_mode(&edp_info->video_info); + } + + exynos_dp_set_video_color_format(&edp_info->video_info); + + ret = exynos_dp_get_pll_lock_status(); + if (ret != PLL_LOCKED) { + printk(BIOS_ERR, "DP PLL is not locked yet\n"); + return -1; + } + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 10; + while (retry_cnt) { + ret = exynos_dp_is_slave_video_stream_clock_on(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP stream_clock_on failed\n"); + return ret; + } + retry_cnt--; + mdelay(1); + } else { + printk(BIOS_DEBUG, "DP stream_clock succeeds\n"); + break; + } + } + } + + /* Set to use the register calculated M/N video */ + exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0); + + /* For video bist, Video timing must be generated by register + * not clear if we still need this. We could take it out and it + * might appear to work, then fail strangely. + */ + exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE); + + /* we need to be sure this is off. */ + exynos_dp_disable_video_bist(); + + /* Disable video mute */ + exynos_dp_enable_video_mute(DP_DISABLE); + + /* Configure video Master or Slave mode */ + exynos_dp_enable_video_master(edp_info->video_info.master_mode); + + /* Enable video */ + exynos_dp_start_video(); + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 100; + while (retry_cnt) { + ret = exynos_dp_is_video_stream_on(); + if (ret != EXYNOS_DP_SUCCESS) { + retry_cnt--; + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Timeout of video stream\n"); + } + } else { + printk(BIOS_DEBUG, "DP video stream is on\n"); + break; + } + mdelay(5); + } + } + + return ret; +} + +int exynos_init_dp(struct edp_device_info *edp_info) +{ + unsigned int ret; + + + dp_phy_control(1); + + ret = exynos_dp_init_dp(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP exynos_dp_init_dp() failed\n"); + return ret; + } + + ret = exynos_dp_handle_edid(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "EDP handle_edid fail\n"); + return ret; + } + + ret = exynos_dp_set_link_train(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP link training fail\n"); + return ret; + } + printk(BIOS_DEBUG, "EDP link training ok\n"); + + exynos_dp_enable_scramble(DP_ENABLE); + exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE); + exynos_dp_enable_enhanced_mode(DP_ENABLE); + + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + exynos_dp_init_video(); + ret = exynos_dp_config_video(edp_info); + + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "Exynos DP init failed\n"); + return ret; + } + printk(BIOS_DEBUG, "Exynos DP init done\n"); + + return ret; +} + diff --git a/src/cpu/samsung/exynos5420/dp.h b/src/cpu/samsung/exynos5420/dp.h index 46579b3..d260c88 100644 --- a/src/cpu/samsung/exynos5420/dp.h +++ b/src/cpu/samsung/exynos5420/dp.h @@ -24,474 +24,1402 @@ #define CPU_SAMSUNG_EXYNOS5420_DP_H
/* DSIM register map */ -struct exynos5_dp { +struct exynos_dp { u8 res1[0x10]; - u32 dp_tx_version; - u32 dp_tx_sw_reset; - u32 func_en_1; - u32 func_en_2; - u32 video_ctl_1; - u32 video_ctl_2; - u32 video_ctl_3; - u32 video_ctl_4; - u32 clr_blue_cb; - u32 clr_green_y; - u32 clr_red_cr; - u32 video_ctl_8; + u32 tx_version; + u32 tx_sw_reset; + u32 func_en1; + u32 func_en2; + u32 video_ctl1; + u32 video_ctl2; + u32 video_ctl3; + u32 video_ctl4; + u32 color_blue_cb; + u32 color_green_y; + u32 color_red_cr; + u32 video_ctl8; u8 res2[0x4]; - u32 video_ctl_10; - u32 total_line_l; - u32 total_line_h; - u32 active_line_l; - u32 active_line_h; - u32 v_f_porch; - u32 vsync; - u32 v_b_porch; - u32 total_pixel_l; - u32 total_pixel_h; - u32 active_pixel_l; - u32 active_pixel_h; - u32 h_f_porch_l; - u32 h_f_porch_h; - u32 hsync_l; - u32 hysnc_h; - u32 h_b_porch_l; - u32 h_b_porch_h; - u32 vid_status; - u32 total_line_sta_l; - u32 total_line_sta_h; - u32 active_line_sta_l; - u32 active_line_sta_h; - u32 v_f_porch_sta; - u32 vsync_sta; - u32 v_b_porch_sta; - u32 total_pixel_sta_l; - u32 total_pixel_sta_h; - u32 active_pixel_sta_l; - u32 active_pixel_sta_h; - u32 h_f_porch_sta_l; - u32 h_f_porch_sta_h; - u32 hsync_sta_l; - u32 hsync_sta_h; - u32 h_b_porch_sta_l; - u32 h_b_porch__sta_h; + u32 video_ctl10; + u32 total_ln_cfg_l; + u32 total_ln_cfg_h; + u32 active_ln_cfg_l; + u32 active_ln_cfg_h; + u32 vfp_cfg; + u32 vsw_cfg; + u32 vbp_cfg; + u32 total_pix_cfg_l; + u32 total_pix_cfg_h; + u32 active_pix_cfg_l; + u32 active_pix_cfg_h; + u32 hfp_cfg_l; + u32 hfp_cfg_h; + u32 hsw_cfg_l; + u32 hsw_cfg_h; + u32 hbp_cfg_l; + u32 hbp_cfg_h; + u32 video_status; + u32 total_ln_sta_l; + u32 total_ln_sta_h; + u32 active_ln_sta_l; + u32 active_ln_sta_h; + + u32 vfp_sta; + u32 vsw_sta; + u32 vbp_sta; + + u32 total_pix_sta_l; + u32 total_pix_sta_h; + u32 active_pix_sta_l; + u32 active_pix_sta_h; + + u32 hfp_sta_l; + u32 hfp_sta_h; + u32 hsw_sta_l; + u32 hsw_sta_h; + u32 hbp_sta_l; + u32 hbp_sta_h; + u8 res3[0x288]; + u32 lane_map; u8 res4[0x10]; - u32 analog_ctl_1; - u32 analog_ctl_2; - u32 analog_ctl_3; - u32 pll_filter_ctl_1; - u32 tx_amp_tuning_ctl; + u32 analog_ctl1; + u32 analog_ctl2; + u32 analog_ctl3; + + u32 pll_filter_ctl1; + u32 amp_tuning_ctl; u8 res5[0xc]; + u32 aux_hw_retry_ctl; u8 res6[0x2c]; u32 int_state; - u32 common_int_sta_1; - u32 common_int_sta_2; - u32 common_int_sta_3; - u32 common_int_sta_4; + u32 common_int_sta1; + u32 common_int_sta2; + u32 common_int_sta3; + u32 common_int_sta4; u8 res7[0x8]; - u32 dp_int_sta; - u32 common_int_mask_1; - u32 common_int_mask_2; - u32 common_int_mask_3; - u32 common_int_mask_4; - u8 res8[0x08]; - u32 int_sta_mask; + + u32 int_sta; + u8 res8[0x1c]; u32 int_ctl; u8 res9[0x200]; - u32 sys_ctl_1; - u32 sys_ctl_2; - u32 sys_ctl_3; - u32 sys_ctl_4; - u32 dp_vid_ctl; + u32 sys_ctl1; + u32 sys_ctl2; + u32 sys_ctl3; + u32 sys_ctl4; + u32 vid_ctl; u8 res10[0x2c]; u32 pkt_send_ctl; - u8 res11[0x4]; - u32 dp_hdcp_ctl; - u8 res12[0x34]; + u8 res[0x4]; + u32 hdcp_ctl; + u8 res11[0x34]; u32 link_bw_set; + u32 lane_count_set; - u32 dp_training_ptn_set; - u32 ln0_link_trn_ctl; - u32 ln1_link_trn_ctl; - u32 ln2_link_trn_ctl; - u32 ln3_link_trn_ctl; - u32 dp_dn_spread; - u32 dp_hw_link_training; - u8 res13[0x1c]; - u32 dp_debug_ctl; - u32 dp_hpd_deglitch_l; - u32 dp_hpd_deglitch_h; - u8 res14[0x14]; - u32 dp_link_debug_ctl; - u8 res15[0x1c]; - u32 m_vid_0; - u32 m_vid_1; - u32 m_vid_2; - u32 n_vid_0; - u32 n_vid_1; - u32 n_vid_2; + u32 training_ptn_set; + u32 ln0_link_training_ctl; + u32 ln1_link_training_ctl; + u32 ln2_link_training_ctl; + u32 ln3_link_training_ctl; + u32 dn_spread_ctl; + u32 hw_link_training_ctl; + u8 res12[0x1c]; + + u32 debug_ctl; + u32 hpd_deglitch_l; + u32 hpd_deglitch_h; + + u8 res13[0x14]; + u32 link_debug_ctl; + + u8 res14[0x1c]; + + u32 m_vid0; + u32 m_vid1; + u32 m_vid2; + u32 n_vid0; + u32 n_vid1; + u32 n_vid2; u32 m_vid_mon; - u32 dp_pll_ctl; - u32 dp_phy_pd; - u32 dp_phy_test; + u32 pll_ctl; + u32 phy_pd; + u32 phy_test; + u8 res15[0x8]; + + u32 video_fifo_thrd; u8 res16[0x8]; - u32 dp_video_fifo_thrd; - u8 res17[0x8]; - u32 dp_audio_margin; - u32 dp_dn_spread_ctl_1; - u32 dp_dn_spread_ctl_2; - u8 res18[0x18]; - u32 dp_m_cal_ctl; + u32 audio_margin; + + u32 dn_spread_ctl1; + u32 dn_spread_ctl2; + u8 res17[0x18]; + u32 m_cal_ctl; u32 m_vid_gen_filter_th; - u8 res19[0x14]; + u8 res18[0x10]; u32 m_aud_gen_filter_th; + u8 res50[0x4]; + u32 aux_ch_sta; u32 aux_err_num; - u32 aux_ch_defer_dtl; + u32 aux_ch_defer_ctl; u32 aux_rx_comm; - u32 buf_data_ctl; - u32 aux_ch_ctl_1; + u32 buffer_data_ctl; + + u32 aux_ch_ctl1; u32 aux_addr_7_0; u32 aux_addr_15_8; u32 aux_addr_19_16; - u32 aux_ch_ctl_2; - u8 res20[0x18]; - u32 buf_data_0; - u8 res21[0x3c]; + u32 aux_ch_ctl2; + u8 res19[0x18]; + u32 buf_data0; + u8 res20[0x3c]; + u32 soc_general_ctl; + u8 res21[0x8c]; + u32 crc_con; + u32 crc_result; + u8 res22[0x8]; + + u32 common_int_mask1; + u32 common_int_mask2; + u32 common_int_mask3; + u32 common_int_mask4; + u32 int_sta_mask1; + u32 int_sta_mask2; + u32 int_sta_mask3; + u32 int_sta_mask4; + u32 int_sta_mask; + u32 crc_result2; + u32 scrambler_reset_cnt; + + u32 pn_inv; + u32 psr_config; + u32 psr_command0; + u32 psr_command1; + u32 psr_crc_mon0; + u32 psr_crc_mon1; + + u8 res24[0x30]; + u32 phy_bist_ctrl; + u8 res25[0xc]; + u32 phy_ctrl; + u8 res26[0x1c]; + u32 test_pattern_gen_en; + u32 test_pattern_gen_ctrl; }; -/* DP_TX_SW_RESET */ -#define RESET_DP_TX (1 << 0) - -/* DP_FUNC_EN_1 */ -#define MASTER_VID_FUNC_EN_N (1 << 7) -#define SLAVE_VID_FUNC_EN_N (1 << 5) -#define AUD_FIFO_FUNC_EN_N (1 << 4) -#define AUD_FUNC_EN_N (1 << 3) -#define HDCP_FUNC_EN_N (1 << 2) -#define CRC_FUNC_EN_N (1 << 1) -#define SW_FUNC_EN_N (1 << 0) - -/* DP_FUNC_EN_2 */ -#define SSC_FUNC_EN_N (1 << 7) -#define AUX_FUNC_EN_N (1 << 2) -#define SERDES_FIFO_FUNC_EN_N (1 << 1) -#define LS_CLK_DOMAIN_FUNC_EN_N (1 << 0) - -/* DP_VIDEO_CTL_1 */ -#define VIDEO_EN (1 << 7) -#define HDCP_VIDEO_MUTE (1 << 6) - -/* DP_VIDEO_CTL_1 */ -#define IN_D_RANGE_MASK (1 << 7) + +/* For DP VIDEO CTL 1 */ +#define VIDEO_EN_MASK (0x01 << 7) +#define VIDEO_MUTE_MASK (0x01 << 6) + +/* For DP VIDEO CTL 4 */ +#define VIDEO_BIST_MASK (0x1 << 3) + +/* EXYNOS_DP_ANALOG_CTL_1 */ +#define SEL_BG_NEW_BANDGAP (0x0 << 6) +#define SEL_BG_INTERNAL_RESISTOR (0x1 << 6) +#define TX_TERMINAL_CTRL_73_OHM (0x0 << 4) +#define TX_TERMINAL_CTRL_61_OHM (0x1 << 4) +#define TX_TERMINAL_CTRL_50_OHM (0x2 << 4) +#define TX_TERMINAL_CTRL_45_OHM (0x3 << 4) +#define SWING_A_30PER_G_INCREASE (0x1 << 3) +#define SWING_A_30PER_G_NORMAL (0x0 << 3) + +/* EXYNOS_DP_ANALOG_CTL_2 */ +#define CPREG_BLEED (0x1 << 4) +#define SEL_24M (0x1 << 3) +#define TX_DVDD_BIT_1_0000V (0x3 << 0) +#define TX_DVDD_BIT_1_0625V (0x4 << 0) +#define TX_DVDD_BIT_1_1250V (0x5 << 0) + +/* EXYNOS_DP_ANALOG_CTL_3 */ +#define DRIVE_DVDD_BIT_1_0000V (0x3 << 5) +#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5) +#define DRIVE_DVDD_BIT_1_1250V (0x5 << 5) +#define SEL_CURRENT_DEFAULT (0x0 << 3) +#define VCO_BIT_000_MICRO (0x0 << 0) +#define VCO_BIT_200_MICRO (0x1 << 0) +#define VCO_BIT_300_MICRO (0x2 << 0) +#define VCO_BIT_400_MICRO (0x3 << 0) +#define VCO_BIT_500_MICRO (0x4 << 0) +#define VCO_BIT_600_MICRO (0x5 << 0) +#define VCO_BIT_700_MICRO (0x6 << 0) +#define VCO_BIT_900_MICRO (0x7 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_1 */ +#define PD_RING_OSC (0x1 << 6) +#define AUX_TERMINAL_CTRL_52_OHM (0x3 << 4) +#define AUX_TERMINAL_CTRL_69_OHM (0x2 << 4) +#define AUX_TERMINAL_CTRL_102_OHM (0x1 << 4) +#define AUX_TERMINAL_CTRL_200_OHM (0x0 << 4) +#define TX_CUR1_1X (0x0 << 2) +#define TX_CUR1_2X (0x1 << 2) +#define TX_CUR1_3X (0x2 << 2) +#define TX_CUR_1_MA (0x0 << 0) +#define TX_CUR_2_MA (0x1 << 0) +#define TX_CUR_3_MA (0x2 << 0) +#define TX_CUR_4_MA (0x3 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_2 */ +#define CH3_AMP_0_MV (0x3 << 12) +#define CH2_AMP_0_MV (0x3 << 8) +#define CH1_AMP_0_MV (0x3 << 4) +#define CH0_AMP_0_MV (0x3 << 0) + +/* EXYNOS_DP_PLL_CTL */ +#define DP_PLL_PD (0x1 << 7) +#define DP_PLL_RESET (0x1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4) +#define DP_PLL_REF_BIT_1_1250V (0x5 << 0) +#define DP_PLL_REF_BIT_1_2500V (0x7 << 0) + +/* EXYNOS_DP_INT_CTL */ +#define SOFT_INT_CTRL (0x1 << 2) +#define INT_POL (0x1 << 0) + +/* DP TX SW RESET */ +#define RESET_DP_TX (0x01 << 0) + +/* DP FUNC_EN_1 */ +#define MASTER_VID_FUNC_EN_N (0x1 << 7) +#define SLAVE_VID_FUNC_EN_N (0x1 << 5) +#define AUD_FIFO_FUNC_EN_N (0x1 << 4) +#define AUD_FUNC_EN_N (0x1 << 3) +#define HDCP_FUNC_EN_N (0x1 << 2) +#define CRC_FUNC_EN_N (0x1 << 1) +#define SW_FUNC_EN_N (0x1 << 0) + +/* DP FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_PHY_PD */ +#define PHY_PD (0x1 << 5) +#define AUX_PD (0x1 << 4) +#define CH3_PD (0x1 << 3) +#define CH2_PD (0x1 << 2) +#define CH1_PD (0x1 << 1) +#define CH0_PD (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_1 */ +#define VSYNC_DET (0x1 << 7) +#define PLL_LOCK_CHG (0x1 << 6) +#define SPDIF_ERR (0x1 << 5) +#define SPDIF_UNSTBL (0x1 << 4) +#define VID_FORMAT_CHG (0x1 << 3) +#define AUD_CLK_CHG (0x1 << 2) +#define VID_CLK_CHG (0x1 << 1) +#define SW_INT (0x1 << 0) + +/* EXYNOS_DP_DEBUG_CTL */ +#define PLL_LOCK (0x1 << 4) +#define F_PLL_LOCK (0x1 << 3) +#define PLL_LOCK_CTRL (0x1 << 2) + +/* EXYNOS_DP_FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_4 */ +#define PSR_ACTIVE (0x1 << 7) +#define PSR_INACTIVE (0x1 << 6) +#define SPDIF_BI_PHASE_ERR (0x1 << 5) +#define HOTPLUG_CHG (0x1 << 2) +#define HPD_LOST (0x1 << 1) +#define PLUG (0x1 << 0) + +/* EXYNOS_DP_INT_STA */ +#define INT_HPD (0x1 << 6) +#define HW_TRAINING_FINISH (0x1 << 5) +#define RPLY_RECEIV (0x1 << 1) +#define AUX_ERR (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8) +#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3) +#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3) +#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3) +#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3) +#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3) +#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0) + +/* EXYNOS_DP_AUX_CH_DEFER_CTL */ +#define DEFER_CTRL_EN (0x1 << 7) +#define DEFER_COUNT(x) (((x) & 0x7f) << 0) + +#define COMMON_INT_MASK_1 (0) +#define COMMON_INT_MASK_2 (0) +#define COMMON_INT_MASK_3 (0) +#define COMMON_INT_MASK_4 (0) +#define INT_STA_MASK (0) + +/* EXYNOS_DP_BUFFER_DATA_CTL */ +#define BUF_CLR (0x1 << 7) +#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0) + +/* EXYNOS_DP_AUX_ADDR_7_0 */ +#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_15_8 */ +#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_19_16 */ +#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f) + +/* EXYNOS_DP_AUX_CH_CTL_1 */ +#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4) +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3) +#define AUX_TX_COMM_MOT (0x1 << 2) +#define AUX_TX_COMM_WRITE (0x0 << 0) +#define AUX_TX_COMM_READ (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_CTL_2 */ +#define ADDR_ONLY (0x1 << 1) +#define AUX_EN (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_STA */ +#define AUX_BUSY (0x1 << 4) +#define AUX_STATUS_MASK (0xf << 0) + +/* EXYNOS_DP_AUX_RX_COMM */ +#define AUX_RX_COMM_I2C_DEFER (0x2 << 2) +#define AUX_RX_COMM_AUX_DEFER (0x2 << 0) + +/* EXYNOS_DP_PHY_TEST */ +#define MACRO_RST (0x1 << 5) +#define CH1_TEST (0x1 << 1) +#define CH0_TEST (0x1 << 0) + +/* EXYNOS_DP_TRAINING_PTN_SET */ +#define SCRAMBLER_TYPE (0x1 << 9) +#define HW_LINK_TRAINING_PATTERN (0x1 << 8) +#define SCRAMBLING_DISABLE (0x1 << 5) +#define SCRAMBLING_ENABLE (0x0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0) +#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0) + +/* EXYNOS_DP_TOTAL_LINE_CFG */ +#define TOTAL_LINE_CFG_L(x) ((x) & 0xff) +#define TOTAL_LINE_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_LINE_CFG_L(x) ((x) & 0xff) +#define ACTIVE_LINE_CFG_H(x) (((x) >> 8) & 0xff) +#define TOTAL_PIXEL_CFG_L(x) ((x) & 0xff) +#define TOTAL_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_PIXEL_CFG_L(x) ((x) & 0xff) +#define ACTIVE_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) + +#define H_F_PORCH_CFG_L(x) ((x) & 0xff) +#define H_F_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_SYNC_PORCH_CFG_L(x) ((x) & 0xff) +#define H_SYNC_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_B_PORCH_CFG_L(x) ((x) & 0xff) +#define H_B_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) + +/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_0 (0x1 << 5) +#define PRE_EMPHASIS_SET_0_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_0_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_0_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_0_SHIFT (3) +#define PRE_EMPHASIS_SET_0_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_0 (0x1 << 2) +#define DRIVE_CURRENT_SET_0_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_0_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_0_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_0_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN1_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_1 (0x1 << 5) +#define PRE_EMPHASIS_SET_1_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_1_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_1_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_1_SHIFT (3) +#define PRE_EMPHASIS_SET_1_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_1 (0x1 << 2) +#define DRIVE_CURRENT_SET_1_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_1_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_1_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_1_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN2_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_2 (0x1 << 5) +#define PRE_EMPHASIS_SET_2_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_2_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_2_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_2_SHIFT (3) +#define PRE_EMPHASIS_SET_2_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_2 (0x1 << 2) +#define DRIVE_CURRENT_SET_2_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_2_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_2_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_2_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN3_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_3 (0x1 << 5) +#define PRE_EMPHASIS_SET_3_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_3_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_3_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_3_SHIFT (3) +#define PRE_EMPHASIS_SET_3_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_3 (0x1 << 2) +#define DRIVE_CURRENT_SET_3_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_3_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_3_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_3_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_10 */ +#define FORMAT_SEL (0x1 << 4) +#define INTERACE_SCAN_CFG (0x1 << 2) +#define INTERACE_SCAN_CFG_SHIFT (2) +#define VSYNC_POLARITY_CFG (0x1 << 1) +#define V_S_POLARITY_CFG_SHIFT (1) +#define HSYNC_POLARITY_CFG (0x1 << 0) +#define H_S_POLARITY_CFG_SHIFT (0) + +/* EXYNOS_DP_SOC_GENERAL_CTL */ +#define AUDIO_MODE_SPDIF_MODE (0x1 << 8) +#define AUDIO_MODE_MASTER_MODE (0x0 << 8) +#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4) +#define VIDEO_MASTER_CLK_SEL (0x1 << 2) +#define VIDEO_MASTER_MODE_EN (0x1 << 1) +#define VIDEO_MODE_MASK (0x1 << 0) +#define VIDEO_MODE_SLAVE_MODE (0x1 << 0) +#define VIDEO_MODE_MASTER_MODE (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_1 */ +#define VIDEO_EN (0x1 << 7) +#define HDCP_VIDEO_MUTE (0x1 << 6) + +/* EXYNOS_DP_VIDEO_CTL_2 */ +#define IN_D_RANGE_MASK (0x1 << 7) #define IN_D_RANGE_SHIFT (7) -#define IN_D_RANGE_CEA (1 << 7) -#define IN_D_RANGE_VESA (0 << 7) -#define IN_BPC_MASK (7 << 4) +#define IN_D_RANGE_CEA (0x1 << 7) +#define IN_D_RANGE_VESA (0x0 << 7) +#define IN_BPC_MASK (0x7 << 4) #define IN_BPC_SHIFT (4) -#define IN_BPC_12_BITS (3 << 4) -#define IN_BPC_10_BITS (2 << 4) -#define IN_BPC_8_BITS (1 << 4) -#define IN_BPC_6_BITS (0 << 4) -#define IN_COLOR_F_MASK (3 << 0) +#define IN_BPC_12_BITS (0x3 << 4) +#define IN_BPC_10_BITS (0x2 << 4) +#define IN_BPC_8_BITS (0x1 << 4) +#define IN_BPC_6_BITS (0x0 << 4) +#define IN_COLOR_F_MASK (0x3 << 0) #define IN_COLOR_F_SHIFT (0) -#define IN_COLOR_F_YCBCR444 (2 << 0) -#define IN_COLOR_F_YCBCR422 (1 << 0) -#define IN_COLOR_F_RGB (0 << 0) +#define IN_COLOR_F_YCBCR444 (0x2 << 0) +#define IN_COLOR_F_YCBCR422 (0x1 << 0) +#define IN_COLOR_F_RGB (0x0 << 0)
-/* DP_VIDEO_CTL_3 */ -#define IN_YC_COEFFI_MASK (1 << 7) +/* EXYNOS_DP_VIDEO_CTL_3 */ +#define IN_YC_COEFFI_MASK (0x1 << 7) #define IN_YC_COEFFI_SHIFT (7) -#define IN_YC_COEFFI_ITU709 (1 << 7) -#define IN_YC_COEFFI_ITU601 (0 << 7) -#define VID_CHK_UPDATE_TYPE_MASK (1 << 4) +#define IN_YC_COEFFI_ITU709 (0x1 << 7) +#define IN_YC_COEFFI_ITU601 (0x0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4) #define VID_CHK_UPDATE_TYPE_SHIFT (4) -#define VID_CHK_UPDATE_TYPE_1 (1 << 4) -#define VID_CHK_UPDATE_TYPE_0 (0 << 4) - -/* DP_VIDEO_CTL_10 */ -#define FORMAT_SEL (1 << 4) -#define INTERACE_SCAN_CFG (1 << 2) -#define VSYNC_POLARITY_CFG (1 << 1) -#define HSYNC_POLARITY_CFG (1 << 0) - -/* DP_LANE_MAP */ -#define LANE3_MAP_LOGIC_LANE_0 (0 << 6) -#define LANE3_MAP_LOGIC_LANE_1 (1 << 6) -#define LANE3_MAP_LOGIC_LANE_2 (2 << 6) -#define LANE3_MAP_LOGIC_LANE_3 (3 << 6) -#define LANE2_MAP_LOGIC_LANE_0 (0 << 4) -#define LANE2_MAP_LOGIC_LANE_1 (1 << 4) -#define LANE2_MAP_LOGIC_LANE_2 (2 << 4) -#define LANE2_MAP_LOGIC_LANE_3 (3 << 4) -#define LANE1_MAP_LOGIC_LANE_0 (0 << 2) -#define LANE1_MAP_LOGIC_LANE_1 (1 << 2) -#define LANE1_MAP_LOGIC_LANE_2 (2 << 2) -#define LANE1_MAP_LOGIC_LANE_3 (3 << 2) -#define LANE0_MAP_LOGIC_LANE_0 (0 << 0) -#define LANE0_MAP_LOGIC_LANE_1 (1 << 0) -#define LANE0_MAP_LOGIC_LANE_2 (2 << 0) -#define LANE0_MAP_LOGIC_LANE_3 (3 << 0) - -/* DP_AUX_HW_RETRY_CTL */ -#define AUX_BIT_PERIOD_SHIFT 8 -#define AUX_BIT_PERIOD_MASK 7 - -#define AUX_HW_RETRY_INTERVAL_SHIFT 3 -#define AUX_HW_RETRY_INTERVAL_600_US 0 -#define AUX_HW_RETRY_INTERVAL_800_US 1 -#define AUX_HW_RETRY_INTERVAL_1000_US 2 -#define AUX_HW_RETRY_INTERVAL_1800_US 3 -#define AUX_HW_RETRY_COUNT_SHIFT 0 -#define AUX_HW_RETRY_COUNT_MASK 7 - -/* DP_COMMON_INT_STA_1 */ -#define VSYNC_DET (1 << 7) -#define PLL_LOCK_CHG (1 << 6) -#define SPDIF_ERR (1 << 5) -#define SPDIF_UNSTBL (1 << 4) -#define VID_FORMAT_CHG (1 << 3) -#define AUD_CLK_CHG (1 << 2) -#define VID_CLK_CHG (1 << 1) -#define SW_INT (1 << 0) - -/* DP_COMMON_INT_STA_2 */ -#define ENC_EN_CHG (1 << 6) -#define HW_BKSV_RDY (1 << 3) -#define HW_SHA_DONE (1 << 2) -#define HW_AUTH_STATE_CHG (1 << 1) -#define HW_AUTH_DONE (1 << 0) - -/* DP_COMMON_INT_STA_3 */ -#define AFIFO_UNDER (1 << 7) -#define AFIFO_OVER (1 << 6) -#define R0_CHK_FLAG (1 << 5) - -/* DP_COMMON_INT_STA_4 */ -#define PSR_ACTIVE (1 << 7) -#define PSR_INACTIVE (1 << 6) -#define SPDIF_BI_PHASE_ERR (1 << 5) -#define HOTPLUG_CHG (1 << 2) -#define HPD_LOST (1 << 1) -#define PLUG (1 << 0) - -/* DP_INT_STA */ -#define INT_HPD (1 << 6) -#define HW_TRAINING_FINISH (1 << 5) -#define RPLY_RECEIV (1 << 1) -#define AUX_ERR (1 << 0) - -/* DP_INT_CTL */ -#define INT_POL0 (1 << 0) -#define INT_POL1 (1 << 1) -#define SOFT_INT_CTRL (1 << 2) - -/* DP_SYS_CTL_1 */ -#define DET_STA (1 << 2) -#define FORCE_DET (1 << 1) -#define DET_CTRL (1 << 0) - -/* DP_SYS_CTL_2 */ -#define CHA_CRI_SHIFT 4 -#define CHA_CRI_MASK 0xf -#define CHA_STA (1 << 2) -#define FORCE_CHA (1 << 1) -#define CHA_CTRL (1 << 0) - -/* DP_SYS_CTL_3 */ -#define HPD_STATUS (1 << 6) -#define F_HPD (1 << 5) -#define HPD_CTRL (1 << 4) -#define HDCP_RDY (1 << 3) -#define STRM_VALID (1 << 2) -#define F_VALID (1 << 1) -#define VALID_CTRL (1 << 0) - -/* DP_SYS_CTL_4 */ -#define FIX_M_AUD (1 << 4) -#define ENHANCED (1 << 3) -#define FIX_M_VID (1 << 2) -#define M_VID_UPDATE_CTRL (3 << 0) - -/* DP_TRAINING_PTN_SET */ -#define SCRAMBLER_TYPE (1 << 9) -#define HW_LINK_TRAINING_PATTERN (1 << 8) -#define SCRAMBLING_DISABLE (1 << 5) -#define SCRAMBLING_ENABLE (0 << 5) -#define LINK_QUAL_PATTERN_SET_MASK (3 << 2) -#define LINK_QUAL_PATTERN_SET_PRBS7 (3 << 2) -#define LINK_QUAL_PATTERN_SET_D10_2 (1 << 2) -#define LINK_QUAL_PATTERN_SET_DISABLE (0 << 2) -#define SW_TRAINING_PATTERN_SET_MASK (3 << 0) -#define SW_TRAINING_PATTERN_SET_PTN2 (2 << 0) -#define SW_TRAINING_PATTERN_SET_PTN1 (1 << 0) -#define SW_TRAINING_PATTERN_SET_NORMAL (0 << 0) - -/* DP_LN0_LINK_TRAINING_CTL */ -#define PRE_EMPHASIS_SET_SHIFT (3) - -/* DP_DEBUG_CTL */ -#define PLL_LOCK (1 << 4) -#define F_PLL_LOCK (1 << 3) -#define PLL_LOCK_CTRL (1 << 2) -#define PN_INV (1 << 0) - -/* DP_M_VID */ -#define M_VID_0_VALUE_SHIFT 0 -#define M_VID_1_VALUE_SHIFT 8 -#define M_VID_2_VALUE_SHIFT 16 - -/* DP_M_VID */ -#define N_VID_0_VALUE_SHIFT 0 -#define N_VID_1_VALUE_SHIFT 8 -#define N_VID_2_VALUE_SHIFT 16 - -/* DP_PLL_CTL */ -#define DP_PLL_PD (1 << 7) -#define DP_PLL_RESET (1 << 6) -#define DP_PLL_LOOP_BIT_DEFAULT (1 << 4) -#define DP_PLL_REF_BIT_1_1250V (5 << 0) -#define DP_PLL_REF_BIT_1_2500V (7 << 0) - -/* DP_PHY_PD */ -#define DP_PHY_PD (1 << 5) -#define AUX_PD (1 << 4) -#define CH3_PD (1 << 3) -#define CH2_PD (1 << 2) -#define CH1_PD (1 << 1) -#define CH0_PD (1 << 0) - -/* DP_PHY_TEST */ -#define MACRO_RST (1 << 5) -#define CH1_TEST (1 << 1) -#define CH0_TEST (1 << 0) - -/* DP_AUX_CH_STA */ -#define AUX_BUSY (1 << 4) -#define AUX_STATUS_MASK (0xf << 0) +#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
-/* DP_AUX_CH_DEFER_CTL */ -#define DEFER_CTRL_EN (1 << 7) -#define DEFER_COUNT_SHIFT 0 -#define DEFER_COUNT_MASK 0x7f +/* EXYNOS_DP_TEST_PATTERN_GEN_EN */ +#define TEST_PATTERN_GEN_EN (0x1 << 0) +#define TEST_PATTERN_GEN_DIS (0x0 << 0)
-/* DP_AUX_RX_COMM */ -#define AUX_RX_COMM_I2C_DEFER (2 << 2) -#define AUX_RX_COMM_AUX_DEFER (2 << 0) +/* EXYNOS_DP_TEST_PATTERN_GEN_CTRL */ +#define TEST_PATTERN_MODE_COLOR_SQUARE (0x3 << 0) +#define TEST_PATTERN_MODE_BALCK_WHITE_V_LINES (0x2 << 0) +#define TEST_PATTERN_MODE_COLOR_RAMP (0x1 << 0)
-/* DP_BUFFER_DATA_CTL */ -#define BUF_CLR (1 << 7) +/* EXYNOS_DP_VIDEO_CTL_4 */ +#define BIST_EN (0x1 << 3) +#define BIST_WIDTH_MASK (0x1 << 2) +#define BIST_WIDTH_BAR_32_PIXEL (0x0 << 2) +#define BIST_WIDTH_BAR_64_PIXEL (0x1 << 2) +#define BIST_TYPE_MASK (0x3 << 0) +#define BIST_TYPE_COLOR_BAR (0x0 << 0) +#define BIST_TYPE_WHITE_GRAY_BLACK_BAR (0x1 << 0) +#define BIST_TYPE_MOBILE_WHITE_BAR (0x2 << 0)
-/* Maximum number of tries for Aux Transaction */ -#define MAX_AUX_RETRY_COUNT 10 +/* EXYNOS_DP_SYS_CTL_1 */ +#define DET_STA (0x1 << 2) +#define FORCE_DET (0x1 << 1) +#define DET_CTRL (0x1 << 0)
-/* DP_AUX_CH_CTL_1 */ -#define AUX_LENGTH_SHIFT 4 -#define AUX_LENGTH_MASK 0xf +/* EXYNOS_DP_SYS_CTL_2 */ +#define CHA_CRI(x) (((x) & 0xf) << 4) +#define CHA_STA (0x1 << 2) +#define FORCE_CHA (0x1 << 1) +#define CHA_CTRL (0x1 << 0)
-#define AUX_TX_COMM_MASK (0xf << 0) -#define AUX_TX_COMM_DP_TRANSACTION (1 << 3) -#define AUX_TX_COMM_I2C_TRANSACTION (0 << 3) -#define AUX_TX_COMM_MOT (1 << 2) -#define AUX_TX_COMM_WRITE (0 << 0) -#define AUX_TX_COMM_READ (1 << 0) - -/* DP_AUX_ADDR_7_0 */ -#define AUX_ADDR_7_0_SHIFT 0 -#define AUX_ADDR_7_0_MASK 0xff - -/* DP_AUX_ADDR_15_8 */ -#define AUX_ADDR_15_8_SHIFT 8 -#define AUX_ADDR_15_8_MASK 0xff - -/* DP_AUX_ADDR_19_16 */ -#define AUX_ADDR_19_16_SHIFT 16 -#define AUX_ADDR_19_16_MASK 0x0f - -/* DP_AUX_CH_CTL_2 */ -#define ADDR_ONLY (1 << 1) -#define AUX_EN (1 << 0) - -/* DP_SOC_GENERAL_CTL */ -#define AUDIO_MODE_SPDIF_MODE (1 << 8) -#define AUDIO_MODE_MASTER_MODE (0 << 8) -#define MASTER_VIDEO_INTERLACE_EN (1 << 4) -#define VIDEO_MASTER_CLK_SEL (1 << 2) -#define VIDEO_MASTER_MODE_EN (1 << 1) -#define VIDEO_MODE_MASK (1 << 0) -#define VIDEO_MODE_SLAVE_MODE (1 << 0) -#define VIDEO_MODE_MASTER_MODE (0 << 0) - -#define HW_TRAINING_ERROR_CODE (7<<4) -#define HW_TRAINING_EN (1<<0) +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0)
-/* I2C EDID Chip ID, Slave Address */ -#define I2C_EDID_DEVICE_ADDR 0x50 -#define I2C_E_EDID_DEVICE_ADDR 0x30 +/* EXYNOS_DP_SYS_CTL_4 */ +#define FIX_M_AUD (0x1 << 4) +#define ENHANCED (0x1 << 3) +#define FIX_M_VID (0x1 << 2) +#define M_VID_UPDATE_CTRL (0x3 << 0) + +/* EXYNOS_M_VID_X */ +#define M_VID0_CFG(x) ((x) & 0xff) +#define M_VID1_CFG(x) (((x) >> 8) & 0xff) +#define M_VID2_CFG(x) (((x) >> 16) & 0xff)
-#define EDID_BLOCK_LENGTH 0x80 -#define EDID_HEADER_PATTERN 0x00 -#define EDID_EXTENSION_FLAG 0x7e -#define EDID_CHECKSUM 0x7f +/* EXYNOS_M_VID_X */ +#define N_VID0_CFG(x) ((x) & 0xff) +#define N_VID1_CFG(x) (((x) >> 8) & 0xff) +#define N_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* DPCD_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (0x1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0x0 << 5) +#define DPCD_TRAINING_PATTERN_2 (0x2 << 0) +#define DPCD_TRAINING_PATTERN_1 (0x1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0)
/* Definition for DPCD Register */ -#define DPCD_ADDR_DPCD_REV 0x0000 -#define DPCD_ADDR_MAX_LINK_RATE 0x0001 -#define DPCD_ADDR_MAX_LANE_COUNT 0x0002 -#define DPCD_ADDR_LINK_BW_SET 0x0100 -#define DPCD_ADDR_LANE_COUNT_SET 0x0101 -#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102 -#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103 -#define DPCD_ADDR_LANE0_1_STATUS 0x0202 -#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED 0x0204 -#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206 -#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207 -#define DPCD_ADDR_TEST_REQUEST 0x0218 -#define DPCD_ADDR_TEST_RESPONSE 0x0260 -#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261 -#define DPCD_ADDR_SINK_POWER_STATE 0x0600 - -/* DPCD_ADDR_MAX_LANE_COUNT */ -#define DPCD_MAX_LANE_COUNT_MASK 0x1f - -/* DPCD_ADDR_LANE_COUNT_SET */ -#define DPCD_ENHANCED_FRAME_EN (1 << 7) -#define DPCD_LANE_COUNT_SET_MASK 0x1f - -/* DPCD_ADDR_TRAINING_PATTERN_SET */ -#define DPCD_SCRAMBLING_DISABLED (1 << 5) -#define DPCD_SCRAMBLING_ENABLED (0 << 5) -#define DPCD_TRAINING_PATTERN_2 (2 << 0) -#define DPCD_TRAINING_PATTERN_1 (1 << 0) -#define DPCD_TRAINING_PATTERN_DISABLED (0 << 0) - -/* DPCD_ADDR_LANE0_1_STATUS */ -#define DPCD_LANE_SYMBOL_LOCKED (1 << 2) -#define DPCD_LANE_CHANNEL_EQ_DONE (1 << 1) -#define DPCD_LANE_CR_DONE (1 << 0) -#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE | \ - DPCD_LANE_CHANNEL_EQ_DONE | \ - DPCD_LANE_SYMBOL_LOCKED) - -/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */ -#define DPCD_LINK_STATUS_UPDATED (1 << 7) -#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) -#define DPCD_INTERLANE_ALIGN_DONE (1 << 0) - -/* DPCD_ADDR_TEST_REQUEST */ -#define DPCD_TEST_EDID_READ (1 << 2) - -/* DPCD_ADDR_TEST_RESPONSE */ -#define DPCD_TEST_EDID_CHECKSUM_WRITE (1 << 2) - -/* DPCD_ADDR_SINK_POWER_STATE */ -#define DPCD_SET_POWER_STATE_D0 (1 << 0) -#define DPCD_SET_POWER_STATE_D4 (2 << 0) - -/* Allow DP Gating clock and set FIMD source to 267 Mhz for DP */ -void clock_init_dp_clock(void); +#define DPCD_DPCD_REV (0x0000) +#define DPCD_MAX_LINK_RATE (0x0001) +#define DPCD_MAX_LANE_COUNT (0x0002) +#define DPCD_LINK_BW_SET (0x0100) +#define DPCD_LANE_COUNT_SET (0x0101) +#define DPCD_TRAINING_PATTERN_SET (0x0102) +#define DPCD_TRAINING_LANE0_SET (0x0103) +#define DPCD_LANE0_1_STATUS (0x0202) +#define DPCD_LN_ALIGN_UPDATED (0x0204) +#define DPCD_ADJUST_REQUEST_LANE0_1 (0x0206) +#define DPCD_ADJUST_REQUEST_LANE2_3 (0x0207) +#define DPCD_TEST_REQUEST (0x0218) +#define DPCD_TEST_RESPONSE (0x0260) +#define DPCD_TEST_EDID_CHECKSUM (0x0261) +#define DPCD_SINK_POWER_STATE (0x0600) + +/* DPCD_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (0x1 << 2) + +/* DPCD_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2) + +/* DPCD_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (0x1 << 0) +#define DPCD_SET_POWER_STATE_D4 (0x2 << 0) + +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR (0x50) +#define I2C_E_EDID_DEVICE_ADDR (0x30) +#define EDID_BLOCK_LENGTH (0x80) +#define EDID_HEADER_PATTERN (0x00) +#define EDID_EXTENSION_FLAG (0x7e) +#define EDID_CHECKSUM (0x7f) + +/* DPCD_LANE0_1_STATUS */ +#define DPCD_LANE1_SYMBOL_LOCKED (0x1 << 6) +#define DPCD_LANE1_CHANNEL_EQ_DONE (0x1 << 5) +#define DPCD_LANE1_CR_DONE (0x1 << 4) +#define DPCD_LANE0_SYMBOL_LOCKED (0x1 << 2) +#define DPCD_LANE0_CHANNEL_EQ_DONE (0x1 << 1) +#define DPCD_LANE0_CR_DONE (0x1 << 0) + +/* DPCD_ADJUST_REQUEST_LANE0_1 */ +#define DPCD_PRE_EMPHASIS_LANE1_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE1_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE0_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE0_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_0 (0x0 << 0) + +/* DPCD_ADJUST_REQUEST_LANE2_3 */ +#define DPCD_PRE_EMPHASIS_LANE2_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE2_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE3_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE3_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_0 (0x0 << 0) + +/* DPCD_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (0x1 << 7) +#define DPCD_LN_COUNT_SET(x) ((x) & 0x1f) + +/* DPCD_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (0x1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0) + +/* DPCD_TRAINING_LANE0_SET */ +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_3 (0x3 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_2 (0x2 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_1 (0x1 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 (0x0 << 3) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0 (0x0 << 0) + +#define DPCD_REQ_ADJ_SWING (0x00) +#define DPCD_REQ_ADJ_EMPHASIS (0x01) + +#define DP_LANE_STAT_CR_DONE (0x01 << 0) +#define DP_LANE_STAT_CE_DONE (0x01 << 1) +#define DP_LANE_STAT_SYM_LOCK (0x01 << 2) + +struct exynos_fb { + u32 vidcon0; + u32 vidcon1; + u32 vidcon2; + u32 vidcon3; + u32 vidtcon0; + u32 vidtcon1; + u32 vidtcon2; + u32 vidtcon3; + u32 wincon0; + u32 wincon1; + u32 wincon2; + u32 wincon3; + u32 wincon4; + + u32 winshmap; + u32 res1; + + u32 winchmap2; + u32 vidosd0a; + u32 vidosd0b; + u32 vidosd0c; + u32 res2; + + u32 vidosd1a; + u32 vidosd1b; + u32 vidosd1c; + u32 vidosd1d; + + u32 vidosd2a; + u32 vidosd2b; + u32 vidosd2c; + u32 vidosd2d; + + u32 vidosd3a; + u32 vidosd3b; + u32 vidosd3c; + u32 res3; + + u32 vidosd4a; + u32 vidosd4b; + u32 vidosd4c; + u32 res4[5]; + + u32 vidw00add0b0; + u32 vidw00add0b1; + u32 vidw01add0b0; + u32 vidw01add0b1; + + u32 vidw02add0b0; + u32 vidw02add0b1; + u32 vidw03add0b0; + u32 vidw03add0b1; + u32 vidw04add0b0; + u32 vidw04add0b1; + u32 res5[2]; + + u32 vidw00add1b0; + u32 vidw00add1b1; + u32 vidw01add1b0; + u32 vidw01add1b1; + + u32 vidw02add1b0; + u32 vidw02add1b1; + u32 vidw03add1b0; + u32 vidw03add1b1; + + u32 vidw04add1b0; + u32 vidw04add1b1; + u32 res7[2]; + + u32 vidw00add2; + u32 vidw01add2; + u32 vidw02add2; + u32 vidw03add2; + u32 vidw04add2; + u32 res8[7]; + + u32 vidintcon0; + u32 vidintcon1; + u32 res9[1]; + + u32 w1keycon0; + u32 w1keycon1; + u32 w2keycon0; + u32 w2keycon1; + u32 w3keycon0; + u32 w3keycon1; + u32 w4keycon0; + u32 w4keycon1; + + u32 w1keyalpha; + u32 w2keyalpha; + u32 w3keyalpha; + u32 w4keyalpha; + + u32 dithmode; + u32 res10[2]; + + u32 win0map; + u32 win1map; + u32 win2map; + u32 win3map; + u32 win4map; + u32 res11[1]; + + u32 wpalcon_h; + u32 wpalcon_l; + + u32 trigcon; + u32 res12[2]; + + u32 i80ifcona0; + u32 i80ifcona1; + u32 i80ifconb0; + u32 i80ifconb1; + + u32 colorgaincon; + u32 res13[2]; + + u32 ldi_cmdcon0; + u32 ldi_cmdcon1; + u32 res14[1]; + + /* To be updated */ + + u8 res15[156]; + u32 dualrgb; + u8 res16[16]; + u32 dp_mie_clkcon; +}; + + +/* LCD IF register offset */ +#define EXYNOS5_LCD_IF_BASE_OFFSET 0x20000 + +static inline u32 exynos_fimd_get_base_offset(void) +{ + return EXYNOS5_LCD_IF_BASE_OFFSET/4; +} + +/* + * Register offsets +*/ +#define EXYNOS_WINCON(x) (x) +#define EXYNOS_VIDOSD(x) (x * 4) +#define EXYNOS_BUFFER_OFFSET(x) (x * 2) +#define EXYNOS_BUFFER_SIZE(x) (x) + +/* + * Bit Definitions +*/ + +/* VIDCON0 */ +#define EXYNOS_VIDCON0_DSI_DISABLE (0 << 30) +#define EXYNOS_VIDCON0_DSI_ENABLE (1 << 30) +#define EXYNOS_VIDCON0_SCAN_PROGRESSIVE (0 << 29) +#define EXYNOS_VIDCON0_SCAN_INTERLACE (1 << 29) +#define EXYNOS_VIDCON0_SCAN_MASK (1 << 29) +#define EXYNOS_VIDCON0_VIDOUT_RGB (0 << 26) +#define EXYNOS_VIDCON0_VIDOUT_ITU (1 << 26) +#define EXYNOS_VIDCON0_VIDOUT_I80LDI0 (2 << 26) +#define EXYNOS_VIDCON0_VIDOUT_I80LDI1 (3 << 26) +#define EXYNOS_VIDCON0_VIDOUT_WB_RGB (4 << 26) +#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI0 (6 << 26) +#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI1 (7 << 26) +#define EXYNOS_VIDCON0_VIDOUT_MASK (7 << 26) +#define EXYNOS_VIDCON0_PNRMODE_RGB_P (0 << 17) +#define EXYNOS_VIDCON0_PNRMODE_BGR_P (1 << 17) +#define EXYNOS_VIDCON0_PNRMODE_RGB_S (2 << 17) +#define EXYNOS_VIDCON0_PNRMODE_BGR_S (3 << 17) +#define EXYNOS_VIDCON0_PNRMODE_MASK (3 << 17) +#define EXYNOS_VIDCON0_PNRMODE_SHIFT (17) +#define EXYNOS_VIDCON0_CLKVALUP_ALWAYS (0 << 16) +#define EXYNOS_VIDCON0_CLKVALUP_START_FRAME (1 << 16) +#define EXYNOS_VIDCON0_CLKVALUP_MASK (1 << 16) +#define EXYNOS_VIDCON0_CLKVAL_F(x) (((x) & 0xff) << 6) +#define EXYNOS_VIDCON0_VCLKEN_NORMAL (0 << 5) +#define EXYNOS_VIDCON0_VCLKEN_FREERUN (1 << 5) +#define EXYNOS_VIDCON0_VCLKEN_MASK (1 << 5) +#define EXYNOS_VIDCON0_CLKDIR_DIRECTED (0 << 4) +#define EXYNOS_VIDCON0_CLKDIR_DIVIDED (1 << 4) +#define EXYNOS_VIDCON0_CLKDIR_MASK (1 << 4) +#define EXYNOS_VIDCON0_CLKSEL_HCLK (0 << 2) +#define EXYNOS_VIDCON0_CLKSEL_SCLK (1 << 2) +#define EXYNOS_VIDCON0_CLKSEL_MASK (1 << 2) +#define EXYNOS_VIDCON0_ENVID_ENABLE (1 << 1) +#define EXYNOS_VIDCON0_ENVID_DISABLE (0 << 1) +#define EXYNOS_VIDCON0_ENVID_F_ENABLE (1 << 0) +#define EXYNOS_VIDCON0_ENVID_F_DISABLE (0 << 0) + +/* VIDCON1 */ +#define EXYNOS_VIDCON1_IVCLK_FALLING_EDGE (0 << 7) +#define EXYNOS_VIDCON1_IVCLK_RISING_EDGE (1 << 7) +#define EXYNOS_VIDCON1_IHSYNC_NORMAL (0 << 6) +#define EXYNOS_VIDCON1_IHSYNC_INVERT (1 << 6) +#define EXYNOS_VIDCON1_IVSYNC_NORMAL (0 << 5) +#define EXYNOS_VIDCON1_IVSYNC_INVERT (1 << 5) +#define EXYNOS_VIDCON1_IVDEN_NORMAL (0 << 4) +#define EXYNOS_VIDCON1_IVDEN_INVERT (1 << 4) + +/* VIDCON2 */ +#define EXYNOS_VIDCON2_EN601_DISABLE (0 << 23) +#define EXYNOS_VIDCON2_EN601_ENABLE (1 << 23) +#define EXYNOS_VIDCON2_EN601_MASK (1 << 23) +#define EXYNOS_VIDCON2_WB_DISABLE (0 << 15) +#define EXYNOS_VIDCON2_WB_ENABLE (1 << 15) +#define EXYNOS_VIDCON2_WB_MASK (1 << 15) +#define EXYNOS_VIDCON2_TVFORMATSEL_HW (0 << 14) +#define EXYNOS_VIDCON2_TVFORMATSEL_SW (1 << 14) +#define EXYNOS_VIDCON2_TVFORMATSEL_MASK (1 << 14) +#define EXYNOS_VIDCON2_TVFORMATSEL_YUV422 (1 << 12) +#define EXYNOS_VIDCON2_TVFORMATSEL_YUV444 (2 << 12) +#define EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK (3 << 12) +#define EXYNOS_VIDCON2_ORGYUV_YCBCR (0 << 8) +#define EXYNOS_VIDCON2_ORGYUV_CBCRY (1 << 8) +#define EXYNOS_VIDCON2_ORGYUV_MASK (1 << 8) +#define EXYNOS_VIDCON2_YUVORD_CBCR (0 << 7) +#define EXYNOS_VIDCON2_YUVORD_CRCB (1 << 7) +#define EXYNOS_VIDCON2_YUVORD_MASK (1 << 7) + +/* PRTCON */ +#define EXYNOS_PRTCON_UPDATABLE (0 << 11) +#define EXYNOS_PRTCON_PROTECT (1 << 11) + +/* VIDTCON0 */ +#define EXYNOS_VIDTCON0_VBPDE(x) (((x) & 0xff) << 24) +#define EXYNOS_VIDTCON0_VBPD(x) (((x) & 0xff) << 16) +#define EXYNOS_VIDTCON0_VFPD(x) (((x) & 0xff) << 8) +#define EXYNOS_VIDTCON0_VSPW(x) (((x) & 0xff) << 0) + +/* VIDTCON1 */ +#define EXYNOS_VIDTCON1_VFPDE(x) (((x) & 0xff) << 24) +#define EXYNOS_VIDTCON1_HBPD(x) (((x) & 0xff) << 16) +#define EXYNOS_VIDTCON1_HFPD(x) (((x) & 0xff) << 8) +#define EXYNOS_VIDTCON1_HSPW(x) (((x) & 0xff) << 0) + +/* VIDTCON2 */ +#define EXYNOS_VIDTCON2_LINEVAL(x) (((x) & 0x7ff) << 11) +#define EXYNOS_VIDTCON2_HOZVAL(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDTCON2_LINEVAL_E(x) ((((x) & 0x800) >> 11) << 23) +#define EXYNOS_VIDTCON2_HOZVAL_E(x) ((((x) & 0x800) >> 11) << 22) + +/* Window 0~4 Control - WINCONx */ +#define EXYNOS_WINCON_DATAPATH_DMA (0 << 22) +#define EXYNOS_WINCON_DATAPATH_LOCAL (1 << 22) +#define EXYNOS_WINCON_DATAPATH_MASK (1 << 22) +#define EXYNOS_WINCON_BUFSEL_0 (0 << 20) +#define EXYNOS_WINCON_BUFSEL_1 (1 << 20) +#define EXYNOS_WINCON_BUFSEL_MASK (1 << 20) +#define EXYNOS_WINCON_BUFSEL_SHIFT (20) +#define EXYNOS_WINCON_BUFAUTO_DISABLE (0 << 19) +#define EXYNOS_WINCON_BUFAUTO_ENABLE (1 << 19) +#define EXYNOS_WINCON_BUFAUTO_MASK (1 << 19) +#define EXYNOS_WINCON_BITSWP_DISABLE (0 << 18) +#define EXYNOS_WINCON_BITSWP_ENABLE (1 << 18) +#define EXYNOS_WINCON_BITSWP_SHIFT (18) +#define EXYNOS_WINCON_BYTESWP_DISABLE (0 << 17) +#define EXYNOS_WINCON_BYTESWP_ENABLE (1 << 17) +#define EXYNOS_WINCON_BYTESWP_SHIFT (17) +#define EXYNOS_WINCON_HAWSWP_DISABLE (0 << 16) +#define EXYNOS_WINCON_HAWSWP_ENABLE (1 << 16) +#define EXYNOS_WINCON_HAWSWP_SHIFT (16) +#define EXYNOS_WINCON_WSWP_DISABLE (0 << 15) +#define EXYNOS_WINCON_WSWP_ENABLE (1 << 15) +#define EXYNOS_WINCON_WSWP_SHIFT (15) +#define EXYNOS_WINCON_INRGB_RGB (0 << 13) +#define EXYNOS_WINCON_INRGB_YUV (1 << 13) +#define EXYNOS_WINCON_INRGB_MASK (1 << 13) +#define EXYNOS_WINCON_BURSTLEN_16WORD (0 << 9) +#define EXYNOS_WINCON_BURSTLEN_8WORD (1 << 9) +#define EXYNOS_WINCON_BURSTLEN_4WORD (2 << 9) +#define EXYNOS_WINCON_BURSTLEN_MASK (3 << 9) +#define EXYNOS_WINCON_ALPHA_MULTI_DISABLE (0 << 7) +#define EXYNOS_WINCON_ALPHA_MULTI_ENABLE (1 << 7) +#define EXYNOS_WINCON_BLD_PLANE (0 << 6) +#define EXYNOS_WINCON_BLD_PIXEL (1 << 6) +#define EXYNOS_WINCON_BLD_MASK (1 << 6) +#define EXYNOS_WINCON_BPPMODE_1BPP (0 << 2) +#define EXYNOS_WINCON_BPPMODE_2BPP (1 << 2) +#define EXYNOS_WINCON_BPPMODE_4BPP (2 << 2) +#define EXYNOS_WINCON_BPPMODE_8BPP_PAL (3 << 2) +#define EXYNOS_WINCON_BPPMODE_8BPP (4 << 2) +#define EXYNOS_WINCON_BPPMODE_16BPP_565 (5 << 2) +#define EXYNOS_WINCON_BPPMODE_16BPP_A555 (6 << 2) +#define EXYNOS_WINCON_BPPMODE_18BPP_666 (8 << 2) +#define EXYNOS_WINCON_BPPMODE_18BPP_A665 (9 << 2) +#define EXYNOS_WINCON_BPPMODE_24BPP_888 (0xb << 2) +#define EXYNOS_WINCON_BPPMODE_24BPP_A887 (0xc << 2) +#define EXYNOS_WINCON_BPPMODE_32BPP (0xd << 2) +#define EXYNOS_WINCON_BPPMODE_16BPP_A444 (0xe << 2) +#define EXYNOS_WINCON_BPPMODE_15BPP_555 (0xf << 2) +#define EXYNOS_WINCON_BPPMODE_MASK (0xf << 2) +#define EXYNOS_WINCON_BPPMODE_SHIFT (2) +#define EXYNOS_WINCON_ALPHA0_SEL (0 << 1) +#define EXYNOS_WINCON_ALPHA1_SEL (1 << 1) +#define EXYNOS_WINCON_ALPHA_SEL_MASK (1 << 1) +#define EXYNOS_WINCON_ENWIN_DISABLE (0 << 0) +#define EXYNOS_WINCON_ENWIN_ENABLE (1 << 0) + +/* WINCON1 special */ +#define EXYNOS_WINCON1_VP_DISABLE (0 << 24) +#define EXYNOS_WINCON1_VP_ENABLE (1 << 24) +#define EXYNOS_WINCON1_LOCALSEL_FIMC1 (0 << 23) +#define EXYNOS_WINCON1_LOCALSEL_VP (1 << 23) +#define EXYNOS_WINCON1_LOCALSEL_MASK (1 << 23) + +/* WINSHMAP */ +#define EXYNOS_WINSHMAP_PROTECT(x) (((x) & 0x1f) << 10) +#define EXYNOS_WINSHMAP_CH_ENABLE(x) (1 << (x)) +#define EXYNOS_WINSHMAP_CH_DISABLE(x) (1 << (x)) +#define EXYNOS_WINSHMAP_LOCAL_ENABLE(x) (0x20 << (x)) +#define EXYNOS_WINSHMAP_LOCAL_DISABLE(x) (0x20 << (x)) + +/* VIDOSDxA, VIDOSDxB */ +#define EXYNOS_VIDOSD_LEFT_X(x) (((x) & 0x7ff) << 11) +#define EXYNOS_VIDOSD_TOP_Y(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDOSD_RIGHT_X(x) (((x) & 0x7ff) << 11) +#define EXYNOS_VIDOSD_BOTTOM_Y(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDOSD_RIGHT_X_E(x) (((x) & 0x1) << 23) +#define EXYNOS_VIDOSD_BOTTOM_Y_E(x) (((x) & 0x1) << 22) + +/* VIDOSD0C, VIDOSDxD */ +#define EXYNOS_VIDOSD_SIZE(x) (((x) & 0xffffff) << 0) + +/* VIDOSDxC (1~4) */ +#define EXYNOS_VIDOSD_ALPHA0_R(x) (((x) & 0xf) << 20) +#define EXYNOS_VIDOSD_ALPHA0_G(x) (((x) & 0xf) << 16) +#define EXYNOS_VIDOSD_ALPHA0_B(x) (((x) & 0xf) << 12) +#define EXYNOS_VIDOSD_ALPHA1_R(x) (((x) & 0xf) << 8) +#define EXYNOS_VIDOSD_ALPHA1_G(x) (((x) & 0xf) << 4) +#define EXYNOS_VIDOSD_ALPHA1_B(x) (((x) & 0xf) << 0) +#define EXYNOS_VIDOSD_ALPHA0_SHIFT (12) +#define EXYNOS_VIDOSD_ALPHA1_SHIFT (0) + +/* Start Address */ +#define EXYNOS_VIDADDR_START_VBANK(x) (((x) & 0xff) << 24) +#define EXYNOS_VIDADDR_START_VBASEU(x) (((x) & 0xffffff) << 0) + +/* End Address */ +#define EXYNOS_VIDADDR_END_VBASEL(x) (((x) & 0xffffff) << 0) + +/* Buffer Size */ +#define EXYNOS_VIDADDR_OFFSIZE(x) (((x) & 0x1fff) << 13) +#define EXYNOS_VIDADDR_PAGEWIDTH(x) (((x) & 0x1fff) << 0) +#define EXYNOS_VIDADDR_OFFSIZE_E(x) ((((x) & 0x2000) >> 13) << 27) +#define EXYNOS_VIDADDR_PAGEWIDTH_E(x) ((((x) & 0x2000) >> 13) << 26) + +/* WIN Color Map */ +#define EXYNOS_WINMAP_COLOR(x) ((x) & 0xffffff) + +/* VIDINTCON0 */ +#define EXYNOS_VIDINTCON0_SYSMAINCON_DISABLE (0 << 19) +#define EXYNOS_VIDINTCON0_SYSMAINCON_ENABLE (1 << 19) +#define EXYNOS_VIDINTCON0_SYSSUBCON_DISABLE (0 << 18) +#define EXYNOS_VIDINTCON0_SYSSUBCON_ENABLE (1 << 18) +#define EXYNOS_VIDINTCON0_SYSIFDONE_DISABLE (0 << 17) +#define EXYNOS_VIDINTCON0_SYSIFDONE_ENABLE (1 << 17) +#define EXYNOS_VIDINTCON0_FRAMESEL0_BACK (0 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_VSYNC (1 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_ACTIVE (2 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_FRONT (3 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL0_MASK (3 << 15) +#define EXYNOS_VIDINTCON0_FRAMESEL1_NONE (0 << 13) +#define EXYNOS_VIDINTCON0_FRAMESEL1_BACK (1 << 13) +#define EXYNOS_VIDINTCON0_FRAMESEL1_VSYNC (2 << 13) +#define EXYNOS_VIDINTCON0_FRAMESEL1_FRONT (3 << 13) +#define EXYNOS_VIDINTCON0_INTFRMEN_DISABLE (0 << 12) +#define EXYNOS_VIDINTCON0_INTFRMEN_ENABLE (1 << 12) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN4 (1 << 11) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN3 (1 << 10) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN2 (1 << 9) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN1 (1 << 6) +#define EXYNOS_VIDINTCON0_FIFOSEL_WIN0 (1 << 5) +#define EXYNOS_VIDINTCON0_FIFOSEL_ALL (0x73 << 5) +#define EXYNOS_VIDINTCON0_FIFOSEL_MASK (0x73 << 5) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_25 (0 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_50 (1 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_75 (2 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_EMPTY (3 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_FULL (4 << 2) +#define EXYNOS_VIDINTCON0_FIFOLEVEL_MASK (7 << 2) +#define EXYNOS_VIDINTCON0_INTFIFO_DISABLE (0 << 1) +#define EXYNOS_VIDINTCON0_INTFIFO_ENABLE (1 << 1) +#define EXYNOS_VIDINTCON0_INT_DISABLE (0 << 0) +#define EXYNOS_VIDINTCON0_INT_ENABLE (1 << 0) +#define EXYNOS_VIDINTCON0_INT_MASK (1 << 0) + +/* VIDINTCON1 */ +#define EXYNOS_VIDINTCON1_INTVPPEND (1 << 5) +#define EXYNOS_VIDINTCON1_INTI80PEND (1 << 2) +#define EXYNOS_VIDINTCON1_INTFRMPEND (1 << 1) +#define EXYNOS_VIDINTCON1_INTFIFOPEND (1 << 0) + +/* WINMAP */ +#define EXYNOS_WINMAP_ENABLE (1 << 24) + +/* WxKEYCON0 (1~4) */ +#define EXYNOS_KEYCON0_KEYBLEN_DISABLE (0 << 26) +#define EXYNOS_KEYCON0_KEYBLEN_ENABLE (1 << 26) +#define EXYNOS_KEYCON0_KEY_DISABLE (0 << 25) +#define EXYNOS_KEYCON0_KEY_ENABLE (1 << 25) +#define EXYNOS_KEYCON0_DIRCON_MATCH_FG (0 << 24) +#define EXYNOS_KEYCON0_DIRCON_MATCH_BG (1 << 24) +#define EXYNOS_KEYCON0_COMPKEY(x) (((x) & 0xffffff) << 0) + +/* WxKEYCON1 (1~4) */ +#define EXYNOS_KEYCON1_COLVAL(x) (((x) & 0xffffff) << 0) + +/* DUALRGB */ +#define EXYNOS_DUALRGB_BYPASS_SINGLE (0x00 << 0) +#define EXYNOS_DUALRGB_BYPASS_DUAL (0x01 << 0) +#define EXYNOS_DUALRGB_MIE_DUAL (0x10 << 0) +#define EXYNOS_DUALRGB_MIE_SINGLE (0x11 << 0) +#define EXYNOS_DUALRGB_LINESPLIT (0x0 << 2) +#define EXYNOS_DUALRGB_FRAMESPLIT (0x1 << 2) +#define EXYNOS_DUALRGB_SUB_CNT(x) ((x & 0xfff) << 4) +#define EXYNOS_DUALRGB_VDEN_EN_DISABLE (0x0 << 16) +#define EXYNOS_DUALRGB_VDEN_EN_ENABLE (0x1 << 16) +#define EXYNOS_DUALRGB_MAIN_CNT(x) ((x & 0xfff) << 18) + +/* I80IFCONA0 and I80IFCONA1 */ +#define EXYNOS_LCD_CS_SETUP(x) (((x) & 0xf) << 16) +#define EXYNOS_LCD_WR_SETUP(x) (((x) & 0xf) << 12) +#define EXYNOS_LCD_WR_ACT(x) (((x) & 0xf) << 8) +#define EXYNOS_LCD_WR_HOLD(x) (((x) & 0xf) << 4) +#define EXYNOS_RSPOL_LOW (0 << 2) +#define EXYNOS_RSPOL_HIGH (1 << 2) +#define EXYNOS_I80IFEN_DISABLE (0 << 0) +#define EXYNOS_I80IFEN_ENABLE (1 << 0) + +/* TRIGCON */ +#define EXYNOS_I80SOFT_TRIG_EN (1 << 0) +#define EXYNOS_I80START_TRIG (1 << 1) +#define EXYNOS_I80STATUS_TRIG_DONE (1 << 2) + +/* DP_MIE_CLKCON */ +#define EXYNOS_DP_MIE_DISABLE (0 << 0) +#define EXYNOS_DP_CLK_ENABLE (1 << 1) +#define EXYNOS_MIE_CLK_ENABLE (3 << 0) + +#define DP_TIMEOUT_LOOP_COUNT 100 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 4 + +#define EXYNOS_DP_SUCCESS 0 + +enum { + DP_DISABLE, + DP_ENABLE, +}; + +struct edp_disp_info { + char *name; + unsigned int h_total; + unsigned int h_res; + unsigned int h_sync_width; + unsigned int h_back_porch; + unsigned int h_front_porch; + unsigned int v_total; + unsigned int v_res; + unsigned int v_sync_width; + unsigned int v_back_porch; + unsigned int v_front_porch; + unsigned int v_sync_rate; +}; + +struct edp_link_train_info { + unsigned int lt_status; + unsigned int ep_loop; + unsigned int cr_loop[4]; +}; + +struct edp_video_info { + unsigned int master_mode; + unsigned int bist_mode; + unsigned int bist_pattern; + unsigned int h_sync_polarity; + unsigned int v_sync_polarity; + unsigned int interlaced; + unsigned int color_space; + unsigned int dynamic_range; + unsigned int ycbcr_coeff; + unsigned int color_depth; +}; + +struct edp_device_info { + struct edp_disp_info disp_info; + struct edp_link_train_info lt_info; + struct edp_video_info video_info; + + /*below info get from panel during training*/ + u8 lane_bw; + u8 lane_cnt; + u8 dpcd_rev; + /*support enhanced frame cap */ + u8 dpcd_efc; + u8 *raw_edid; +}; + +enum analog_power_block { + AUX_BLOCK, + CH0_BLOCK, + CH1_BLOCK, + CH2_BLOCK, + CH3_BLOCK, + ANALOG_TOTAL, + POWER_ALL +}; + +enum pll_status { + PLL_UNLOCKED = 0, + PLL_LOCKED +}; + +enum { + COLOR_RGB, + COLOR_YCBCR422, + COLOR_YCBCR444 +}; + +enum { + VESA, + CEA +}; + +enum { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +enum { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +enum { + DP_LANE_BW_1_62 = 0x06, + DP_LANE_BW_2_70 = 0x0a, +}; + +enum { + DP_LANE_CNT_1 = 1, + DP_LANE_CNT_2 = 2, + DP_LANE_CNT_4 = 4, +}; + +enum { + DP_DPCD_REV_10 = 0x10, + DP_DPCD_REV_11 = 0x11, +}; + +enum { + DP_LT_NONE, + DP_LT_START, + DP_LT_CR, + DP_LT_ET, + DP_LT_FINISHED, + DP_LT_FAIL, +}; + +enum { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum { + PRBS7, + D10_2, + TRAINING_PTN1, + TRAINING_PTN2, + DP_NONE +}; + +enum { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pattern_type { + NO_PATTERN, + COLOR_RAMP, + BALCK_WHITE_V_LINES, + COLOR_SQUARE, + INVALID_PATTERN, + COLORBAR_32, + COLORBAR_64, + WHITE_GRAY_BALCKBAR_32, + WHITE_GRAY_BALCKBAR_64, + MOBILE_WHITEBAR_32, + MOBILE_WHITEBAR_64 +}; + +enum { + CALCULATED_M, + REGISTER_M +}; + +enum { + VIDEO_TIMING_FROM_CAPTURE, + VIDEO_TIMING_FROM_REGISTER +}; + + +struct exynos_dp_platform_data { + struct edp_device_info *edp_dev_info; +}; + + +int exynos_init_dp(struct edp_device_info *edp_info); + +void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd); + +void exynos_dp_disable_video_bist(void); +void exynos_dp_enable_video_mute(unsigned int enable); +void exynos_dp_reset(void); +void exynos_dp_enable_sw_func(unsigned int enable); +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable); +unsigned int exynos_dp_get_pll_lock_status(void); +int exynos_dp_init_analog_func(void); +void exynos_dp_init_hpd(void); +void exynos_dp_init_aux(void); +void exynos_dp_config_interrupt(void); +unsigned int exynos_dp_get_plug_in_status(void); +unsigned int exynos_dp_detect_hpd(void); +unsigned int exynos_dp_start_aux_transaction(void); +unsigned int exynos_dp_write_byte_to_dpcd(u32 reg_addr, + u8 data); +unsigned int exynos_dp_read_byte_from_dpcd(u32 reg_addr, + u8 *data); +unsigned int exynos_dp_write_bytes_to_dpcd(u32 reg_addr, + unsigned int count, + u8 data[]); +u32 exynos_dp_read_bytes_from_dpcd( unsigned int reg_addr, + unsigned int count, + u8 data[]); +int exynos_dp_select_i2c_device( u32 device_addr, + u32 reg_addr); +int exynos_dp_read_byte_from_i2c(u32 device_addr, + u32 reg_addr, unsigned int *data); +int exynos_dp_read_bytes_from_i2c(u32 device_addr, + u32 reg_addr, unsigned int count, + u8 edid[]); +void exynos_dp_reset_macro(void); +void exynos_dp_set_link_bandwidth(u8 bwtype); +u8 exynos_dp_get_link_bandwidth(void); +void exynos_dp_set_lane_count(u8 count); +unsigned int exynos_dp_get_lane_count(void); +u8 exynos_dp_get_lanex_pre_emphasis(u8 lanecnt); +void exynos_dp_set_lane_pre_emphasis(unsigned int level, + u8 lanecnt); +void exynos_dp_set_lanex_pre_emphasis(u8 request_val, + u8 lanecnt); +void exynos_dp_set_training_pattern(unsigned int pattern); +void exynos_dp_enable_enhanced_mode(u8 enable); +void exynos_dp_enable_scrambling(unsigned int enable); +int exynos_dp_init_video(void); +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info); +void exynos_dp_set_video_color_format(struct edp_video_info *video_info); +int exynos_dp_config_video_bist(struct edp_device_info *edp_info); +unsigned int exynos_dp_is_slave_video_stream_clock_on(void); +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value); +void exynos_dp_set_video_timing_mode(unsigned int type); +void exynos_dp_enable_video_master(unsigned int enable); +void exynos_dp_start_video(void); +unsigned int exynos_dp_is_video_stream_on(void); +void exynos_dp_set_base_addr(void); +void dp_phy_control(unsigned int enable);
#endif diff --git a/src/cpu/samsung/exynos5420/dp_lowlevel.c b/src/cpu/samsung/exynos5420/dp_lowlevel.c new file mode 100644 index 0000000..64a2962 --- /dev/null +++ b/src/cpu/samsung/exynos5420/dp_lowlevel.c @@ -0,0 +1,1199 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee dh09.lee@samsung.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <arch/io.h> +#include <stdlib.h> +#include <string.h> +#include <timer.h> +#include <delay.h> +#include <console/console.h> +#include "timer.h" +#include "cpu.h" +#include "power.h" +#include "sysreg.h" +#include <drivers/maxim/max77686/max77686.h> + +#include "device/i2c.h" +#include "i2c.h" +#include "fimd.h" +#include "dp.h" + +/* in u-boot, there's a function you call to set a pointer + * to a constant. Klever! + */ +struct exynos_dp *dp_regs = samsung_get_base_dp(); + +/* for debugging, it's nice to get control on a per-file basis. + * I had a bit of a discussion with myself (boring!) about + * how to do this and for the moment this is the easiest way. + * These debugging statements allowed me to find the final bugs. + */ + +#if 0 +static inline void fwadl(unsigned long l,void *v) { + writel(l, v); + printk(BIOS_SPEW, "W %p %p\n", v, (void *)l); +} +#define lwrite32(a,b) fwadl((unsigned long)(a), (void *)(b)) + +static inline unsigned long fradl(void *v) { + unsigned long l = readl(v); + printk(BIOS_SPEW, "R %p %p\n", v, (void *)l); + return l; +} + +#define lread32(a) fradl((void *)(a)) +#else +#define lwrite32(a,b) write32((unsigned long)(a), (void *)(b)) +#define lread32(a) read32((void *)(a)) +#endif + +static void exynos_dp_enable_video_input(u32 enable) +{ + u32 reg; + + reg = lread32(&dp_regs->video_ctl1); + reg &= ~VIDEO_EN_MASK; + + /* enable video input*/ + if (enable) + reg |= VIDEO_EN_MASK; + + lwrite32(reg, &dp_regs->video_ctl1); + + return; +} + +void exynos_dp_disable_video_bist(void) +{ + u32 reg; + reg = lread32(&dp_regs->video_ctl4); + reg &= ~VIDEO_BIST_MASK; + lwrite32(reg, &dp_regs->video_ctl4); +} + +void exynos_dp_enable_video_mute(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->video_ctl1); + reg &= ~(VIDEO_MUTE_MASK); + if (enable) + reg |= VIDEO_MUTE_MASK; + + lwrite32(reg, &dp_regs->video_ctl1); + + return; +} + + +static void exynos_dp_init_analog_param(void) +{ + u32 reg; + + /* + * Set termination + * Normal bandgap, Normal swing, Tx terminal registor 61 ohm + * 24M Phy clock, TX digital logic power is 100:1.0625V + */ + reg = SEL_BG_NEW_BANDGAP | TX_TERMINAL_CTRL_61_OHM | + SWING_A_30PER_G_NORMAL; + lwrite32(reg, &dp_regs->analog_ctl1); + + reg = SEL_24M | TX_DVDD_BIT_1_0625V; + lwrite32(reg, &dp_regs->analog_ctl2); + + /* + * Set power source for internal clk driver to 1.0625v. + * Select current reference of TX driver current to 00:Ipp/2+Ic/2. + * Set VCO range of PLL +- 0uA + */ + reg = DRIVE_DVDD_BIT_1_0625V | SEL_CURRENT_DEFAULT | VCO_BIT_000_MICRO; + lwrite32(reg, &dp_regs->analog_ctl3); + + /* + * Set AUX TX terminal resistor to 102 ohm + * Set AUX channel amplitude control + */ + reg = PD_RING_OSC | AUX_TERMINAL_CTRL_52_OHM | TX_CUR1_2X | TX_CUR_4_MA; + lwrite32(reg, &dp_regs->pll_filter_ctl1); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.2500V + */ + reg = CH3_AMP_0_MV | CH2_AMP_0_MV | CH1_AMP_0_MV | CH0_AMP_0_MV; + + lwrite32(reg, &dp_regs->amp_tuning_ctl); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.1250V + */ + reg = DP_PLL_LOOP_BIT_DEFAULT | DP_PLL_REF_BIT_1_1250V; + lwrite32(reg, &dp_regs->pll_ctl); +} + +static void exynos_dp_init_interrupt(void) +{ + /* Set interrupt registers to initial states */ + + /* + * Disable interrupt + * INT pin assertion polarity. It must be configured + * correctly according to ICU setting. + * 1 = assert high, 0 = assert low + */ + lwrite32(INT_POL, &dp_regs->int_ctl); + + /* Clear pending regisers */ + lwrite32(0xff, &dp_regs->common_int_sta1); + lwrite32(0xff, &dp_regs->common_int_sta2); + lwrite32(0xff, &dp_regs->common_int_sta3); + lwrite32(0xff, &dp_regs->common_int_sta4); + lwrite32(0xff, &dp_regs->int_sta); + + /* 0:mask,1: unmask */ + lwrite32(0x00, &dp_regs->int_sta_mask1); + lwrite32(0x00, &dp_regs->int_sta_mask2); + lwrite32(0x00, &dp_regs->int_sta_mask3); + lwrite32(0x00, &dp_regs->int_sta_mask4); + lwrite32(0x00, &dp_regs->int_sta_mask); +} + +void exynos_dp_reset(void) +{ + u32 reg_func_1; + + /*dp tx sw reset*/ + lwrite32(RESET_DP_TX, &dp_regs->tx_sw_reset); + + exynos_dp_enable_video_input(DP_DISABLE); + exynos_dp_disable_video_bist(); + exynos_dp_enable_video_mute(DP_DISABLE); + + /* software reset */ + reg_func_1 = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | + AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | + HDCP_FUNC_EN_N | SW_FUNC_EN_N; + + lwrite32(reg_func_1, &dp_regs->func_en1); + lwrite32(reg_func_1, &dp_regs->func_en2); + + mdelay(1); + + exynos_dp_init_analog_param(); + exynos_dp_init_interrupt(); + + return; +} + +void exynos_dp_enable_sw_func(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->func_en1); + reg &= ~(SW_FUNC_EN_N); + + if (!enable) + reg |= SW_FUNC_EN_N; + + lwrite32(reg, &dp_regs->func_en1); + + return; +} + +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable) +{ + u32 reg; + + reg = lread32(&dp_regs->phy_pd); + switch (block) { + case AUX_BLOCK: + reg &= ~(AUX_PD); + if (enable) + reg |= AUX_PD; + break; + case CH0_BLOCK: + reg &= ~(CH0_PD); + if (enable) + reg |= CH0_PD; + break; + case CH1_BLOCK: + reg &= ~(CH1_PD); + if (enable) + reg |= CH1_PD; + break; + case CH2_BLOCK: + reg &= ~(CH2_PD); + if (enable) + reg |= CH2_PD; + break; + case CH3_BLOCK: + reg &= ~(CH3_PD); + if (enable) + reg |= CH3_PD; + break; + case ANALOG_TOTAL: + reg &= ~PHY_PD; + if (enable) + reg |= PHY_PD; + break; + case POWER_ALL: + reg &= ~(PHY_PD | AUX_PD | CH0_PD | CH1_PD | CH2_PD | + CH3_PD); + if (enable) + reg |= (PHY_PD | AUX_PD | CH0_PD | CH1_PD | + CH2_PD | CH3_PD); + break; + default: + printk(BIOS_ERR, "DP undefined block number : %d\n", block); + return -1; + } + + lwrite32(reg, &dp_regs->phy_pd); + + return 0; +} + +unsigned int exynos_dp_get_pll_lock_status(void) +{ + u32 reg; + + reg = lread32(&dp_regs->debug_ctl); + + if (reg & PLL_LOCK) + return PLL_LOCKED; + else + return PLL_UNLOCKED; +} + +static void exynos_dp_set_pll_power(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_PD); + + if (!enable) + reg |= DP_PLL_PD; + + lwrite32(reg, &dp_regs->pll_ctl); +} + +int exynos_dp_init_analog_func(void) +{ + int ret = EXYNOS_DP_SUCCESS; + unsigned int retry_cnt = 10; + u32 reg; + + /*Power On All Analog block */ + exynos_dp_set_analog_power_down(POWER_ALL, DP_DISABLE); + + reg = PLL_LOCK_CHG; + lwrite32(reg, &dp_regs->common_int_sta1); + + reg = lread32(&dp_regs->debug_ctl); + reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL); + lwrite32(reg, &dp_regs->debug_ctl); + + /*Assert DP PLL Reset*/ + reg = lread32(&dp_regs->pll_ctl); + reg |= DP_PLL_RESET; + lwrite32(reg, &dp_regs->pll_ctl); + + mdelay(1); + + /*Deassert DP PLL Reset*/ + reg = lread32(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_RESET); + lwrite32(reg, &dp_regs->pll_ctl); + + exynos_dp_set_pll_power(DP_ENABLE); + + while (exynos_dp_get_pll_lock_status() == PLL_UNLOCKED) { + mdelay(1); + retry_cnt--; + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP dp's pll lock failed : retry : %d\n", + retry_cnt); + return -1; + } + } + + printk(BIOS_DEBUG, "dp's pll lock success(%d)\n", retry_cnt); + + /* Enable Serdes FIFO function and Link symbol clock domain module */ + reg = lread32(&dp_regs->func_en2); + reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N + | AUX_FUNC_EN_N); + lwrite32(reg, &dp_regs->func_en2); + + return ret; +} + +void exynos_dp_init_hpd(void) +{ + u32 reg; + + /* Clear interrupts releated to Hot Plug Dectect */ + reg = HOTPLUG_CHG | HPD_LOST | PLUG; + lwrite32(reg, &dp_regs->common_int_sta4); + + reg = INT_HPD; + lwrite32(reg, &dp_regs->int_sta); + + reg = lread32(&dp_regs->sys_ctl3); + reg &= ~(F_HPD | HPD_CTRL); + lwrite32(reg, &dp_regs->sys_ctl3); + + return; +} + +static inline void exynos_dp_reset_aux(void) +{ + u32 reg; + + /* Disable AUX channel module */ + reg = lread32(&dp_regs->func_en2); + reg |= AUX_FUNC_EN_N; + lwrite32(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_init_aux(void) +{ + u32 reg; + + /* Clear inerrupts related to AUX channel */ + reg = RPLY_RECEIV | AUX_ERR; + lwrite32(reg, &dp_regs->int_sta); + + exynos_dp_reset_aux(); + + /* Disable AUX transaction H/W retry */ + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(3)| + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; + lwrite32(reg, &dp_regs->aux_hw_retry_ctl); + + /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ + reg = DEFER_CTRL_EN | DEFER_COUNT(1); + lwrite32(reg, &dp_regs->aux_ch_defer_ctl); + + /* Enable AUX channel module */ + reg = lread32(&dp_regs->func_en2); + reg &= ~AUX_FUNC_EN_N; + lwrite32(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_config_interrupt(void) +{ + u32 reg; + + /* 0: mask, 1: unmask */ + reg = COMMON_INT_MASK_1; + lwrite32(reg, &dp_regs->common_int_mask1); + + reg = COMMON_INT_MASK_2; + lwrite32(reg, &dp_regs->common_int_mask2); + + reg = COMMON_INT_MASK_3; + lwrite32(reg, &dp_regs->common_int_mask3); + + reg = COMMON_INT_MASK_4; + lwrite32(reg, &dp_regs->common_int_mask4); + + reg = INT_STA_MASK; + lwrite32(reg, &dp_regs->int_sta_mask); + + return; +} + +unsigned int exynos_dp_get_plug_in_status(void) +{ + u32 reg; + + reg = lread32(&dp_regs->sys_ctl3); + if (reg & HPD_STATUS) + return 0; + + return -1; +} + +unsigned int exynos_dp_detect_hpd(void) +{ + int timeout_loop = DP_TIMEOUT_LOOP_COUNT; + + mdelay(2); + + while (exynos_dp_get_plug_in_status() != 0) { + if (timeout_loop == 0) + return -1; + mdelay(10); + timeout_loop--; + } + + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_start_aux_transaction(void) +{ + u32 reg; + unsigned int ret = 0; + unsigned int retry_cnt; + + /* Enable AUX CH operation */ + reg = lread32(&dp_regs->aux_ch_ctl2); + reg |= AUX_EN; + lwrite32(reg, &dp_regs->aux_ch_ctl2); + + retry_cnt = 10; + while (retry_cnt) { + reg = lread32(&dp_regs->int_sta); + if (!(reg & RPLY_RECEIV)) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Reply Timeout!!\n"); + ret = -1; + return ret; + } + mdelay(1); + retry_cnt--; + } else + break; + } + + /* Clear interrupt source for AUX CH command reply */ + lwrite32(reg, &dp_regs->int_sta); + + /* Clear interrupt source for AUX CH access error */ + reg = lread32(&dp_regs->int_sta); + if (reg & AUX_ERR) { + printk(BIOS_ERR, "DP Aux Access Error\n"); + lwrite32(AUX_ERR, &dp_regs->int_sta); + ret = -1; + return ret; + } + + /* Check AUX CH error access status */ + reg = lread32(&dp_regs->aux_ch_sta); + if ((reg & AUX_STATUS_MASK) != 0) { + printk(BIOS_DEBUG, "DP AUX CH error happens: %x\n", reg & AUX_STATUS_MASK); + ret = -1; + return ret; + } + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_write_byte_to_dpcd(u32 reg_addr, u8 data) +{ + u32 reg; + unsigned int ret; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_19_16); + + /* Write data buffer */ + reg = data; + lwrite32(reg, &dp_regs->buf_data0); + + /* + * Set DisplayPort transaction and write 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + printk(BIOS_ERR, "DP Aux transaction failed\n"); + } + + return ret; +} + +unsigned int exynos_dp_read_byte_from_dpcd(u32 reg_addr, + unsigned char *data) +{ + u32 reg; + int retval; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + lwrite32(reg, &dp_regs->aux_addr_19_16); + + /* + * Set DisplayPort transaction and read 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != EXYNOS_DP_SUCCESS) + printk(BIOS_DEBUG, "DP Aux Transaction fail!\n"); + + /* Read data buffer */ + reg = lread32(&dp_regs->buf_data0); + *data = (unsigned char)(reg & 0xff); + + return retval; +} + +unsigned int exynos_dp_write_bytes_to_dpcd(u32 reg_addr, + unsigned int count, + unsigned char data[]) +{ + u32 reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_19_16); + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = data[start_offset + cur_data_idx]; + lwrite32(reg, (void *)((unsigned int)&dp_regs->buf_data0 + + (4 * cur_data_idx))); + } + /* + * Set DisplayPort transaction and write + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + start_offset += cur_data_count; + } + + return ret; +} + +unsigned int exynos_dp_read_bytes_from_dpcd(u32 reg_addr, + unsigned int count, + unsigned char data[]) +{ + u32 reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + lwrite32(reg, &dp_regs->aux_addr_19_16); + /* + * Set DisplayPort transaction and read + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printk(BIOS_ERR, "DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = lread32((void *)((u32)&dp_regs->buf_data0 + + 4 * cur_data_idx)); + data[start_offset + cur_data_idx] = (unsigned char)reg; + } + + start_offset += cur_data_count; + } + + return ret; +} + +int exynos_dp_select_i2c_device(u32 device_addr, + u32 reg_addr) +{ + u32 reg; + int retval; + + /* Set EDID device address */ + reg = device_addr; + lwrite32(reg, &dp_regs->aux_addr_7_0); + lwrite32(0x0, &dp_regs->aux_addr_15_8); + lwrite32(0x0, &dp_regs->aux_addr_19_16); + + /* Set offset from base address of EDID device */ + lwrite32(reg_addr, &dp_regs->buf_data0); + + /* + * Set I2C transaction and write address + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | + AUX_TX_COMM_WRITE; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != 0) + printk(BIOS_DEBUG, "%s: DP Aux Transaction fail!\n", __func__); + + return retval; +} + +int exynos_dp_read_byte_from_i2c(u32 device_addr, + u32 reg_addr, + unsigned int *data) +{ + u32 reg; + int i; + int retval; + + for (i = 0; i < 10; i++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Select EDID device */ + retval = exynos_dp_select_i2c_device(device_addr, reg_addr); + if (retval != 0) { + printk(BIOS_DEBUG, "DP Select EDID device fail. retry !\n"); + continue; + } + + /* + * Set I2C transaction and read data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != EXYNOS_DP_SUCCESS) + printk(BIOS_DEBUG, "%s: DP Aux Transaction fail!\n", __func__); + } + + /* Read data */ + if (retval == 0) + *data = lread32(&dp_regs->buf_data0); + + return retval; +} + +int exynos_dp_read_bytes_from_i2c(u32 device_addr, + u32 reg_addr, unsigned int count, unsigned char edid[]) +{ + u32 reg; + unsigned int i, j; + unsigned int cur_data_idx; + unsigned int defer = 0; + int retval = 0; + + for (i = 0; i < count; i += 16) { /* use 16 burst */ + for (j = 0; j < 100; j++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + lwrite32(reg, &dp_regs->buffer_data_ctl); + + /* Set normal AUX CH command */ + reg = lread32(&dp_regs->aux_ch_ctl2); + reg &= ~ADDR_ONLY; + lwrite32(reg, &dp_regs->aux_ch_ctl2); + + /* + * If Rx sends defer, Tx sends only reads + * request without sending addres + */ + if (!defer) + retval = + exynos_dp_select_i2c_device(device_addr, + reg_addr + i); + else + defer = 0; + + if (retval == EXYNOS_DP_SUCCESS) { + /* + * Set I2C transaction and write data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(16) | + AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + lwrite32(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval == 0) + break; + else + printk(BIOS_ERR, "DP Aux Transaction fail!\n"); + } + /* Check if Rx sends defer */ + reg = lread32(&dp_regs->aux_rx_comm); + if (reg == AUX_RX_COMM_AUX_DEFER || + reg == AUX_RX_COMM_I2C_DEFER) { + printk(BIOS_ERR, "DP Defer: %d\n\n", reg); + defer = 1; + } + } + + for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { + reg = lread32((void *)((u32)&dp_regs->buf_data0 + + 4 * cur_data_idx)); + edid[i + cur_data_idx] = (unsigned char)reg; + } + } + + return retval; +} + +void exynos_dp_reset_macro(void) +{ + u32 reg; + + reg = lread32(&dp_regs->phy_test); + reg |= MACRO_RST; + lwrite32(reg, &dp_regs->phy_test); + + /* 10 us is the minimum Macro reset time. */ + mdelay(1); + + reg &= ~MACRO_RST; + lwrite32(reg, &dp_regs->phy_test); +} + +void exynos_dp_set_link_bandwidth(unsigned char bwtype) +{ + u32 reg; + + reg = (u32)bwtype; + + /* Set bandwidth to 2.7G or 1.62G */ + if ((bwtype == DP_LANE_BW_1_62) || (bwtype == DP_LANE_BW_2_70)) + lwrite32(reg, &dp_regs->link_bw_set); +} + +unsigned char exynos_dp_get_link_bandwidth(void) +{ + unsigned char ret; + u32 reg; + + reg = lread32(&dp_regs->link_bw_set); + ret = (unsigned char)reg; + + return ret; +} + +void exynos_dp_set_lane_count(unsigned char count) +{ + u32 reg; + + reg = (u32)count; + + if ((count == DP_LANE_CNT_1) || (count == DP_LANE_CNT_2) || + (count == DP_LANE_CNT_4)) + lwrite32(reg, &dp_regs->lane_count_set); +} + +unsigned int exynos_dp_get_lane_count(void) +{ + u32 reg; + + reg = lread32(&dp_regs->lane_count_set); + + return reg; +} + +unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt) +{ + void *reg_list[DP_LANE_CNT_4] = { + &dp_regs->ln0_link_training_ctl, + &dp_regs->ln1_link_training_ctl, + &dp_regs->ln2_link_training_ctl, + &dp_regs->ln3_link_training_ctl, + }; + + return lread32(reg_list[lanecnt]); +} + +void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val, + unsigned char lanecnt) +{ + void * reg_list[DP_LANE_CNT_4] = { + &dp_regs->ln0_link_training_ctl, + &dp_regs->ln1_link_training_ctl, + &dp_regs->ln2_link_training_ctl, + &dp_regs->ln3_link_training_ctl, + }; + + lwrite32(request_val, reg_list[lanecnt]); +} + +void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt) +{ + unsigned char i; + u32 reg; + void *reg_list[DP_LANE_CNT_4] = { + &dp_regs->ln0_link_training_ctl, + &dp_regs->ln1_link_training_ctl, + &dp_regs->ln2_link_training_ctl, + &dp_regs->ln3_link_training_ctl, + }; + u32 reg_shift[DP_LANE_CNT_4] = { + PRE_EMPHASIS_SET_0_SHIFT, + PRE_EMPHASIS_SET_1_SHIFT, + PRE_EMPHASIS_SET_2_SHIFT, + PRE_EMPHASIS_SET_3_SHIFT + }; + + for (i = 0; i < lanecnt; i++) { + reg = level << reg_shift[i]; + lwrite32(reg, reg_list[i]); + } +} + +void exynos_dp_set_training_pattern(unsigned int pattern) +{ + u32 reg = 0; + + switch (pattern) { + case PRBS7: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7; + break; + case D10_2: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2; + break; + case TRAINING_PTN1: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1; + break; + case TRAINING_PTN2: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2; + break; + case DP_NONE: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_DISABLE | + SW_TRAINING_PATTERN_SET_NORMAL; + break; + default: + break; + } + + lwrite32(reg, &dp_regs->training_ptn_set); +} + +void exynos_dp_enable_enhanced_mode(unsigned char enable) +{ + u32 reg; + + reg = lread32(&dp_regs->sys_ctl4); + reg &= ~ENHANCED; + + if (enable) + reg |= ENHANCED; + + lwrite32(reg, &dp_regs->sys_ctl4); +} + +void exynos_dp_enable_scrambling(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->training_ptn_set); + reg &= ~(SCRAMBLING_DISABLE); + + if (!enable) + reg |= SCRAMBLING_DISABLE; + + lwrite32(reg, &dp_regs->training_ptn_set); +} +int exynos_dp_init_video(void) +{ + unsigned int reg; + + /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */ + reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; + lwrite32(reg, &dp_regs->common_int_sta1); + + /* I_STRM__CLK detect : DE_CTL : Auto detect */ + reg &= ~DET_CTRL; + lwrite32(reg, &dp_regs->sys_ctl1); + return 0; +} + + +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info) +{ + u32 reg; + + /* Video Slave mode setting */ + reg = lread32(&dp_regs->func_en1); + reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); + reg |= MASTER_VID_FUNC_EN_N; + lwrite32(reg, &dp_regs->func_en1); + + /* Configure Interlaced for slave mode video */ + reg = lread32(&dp_regs->video_ctl10); + reg &= ~INTERACE_SCAN_CFG; + reg |= (video_info->interlaced << INTERACE_SCAN_CFG_SHIFT); + printk(BIOS_SPEW, "interlaced %d\n", video_info->interlaced); + lwrite32(reg, &dp_regs->video_ctl10); + + /* Configure V sync polarity for slave mode video */ + reg = lread32(&dp_regs->video_ctl10); + reg &= ~VSYNC_POLARITY_CFG; + reg |= (video_info->v_sync_polarity << V_S_POLARITY_CFG_SHIFT); + lwrite32(reg, &dp_regs->video_ctl10); + + /* Configure H sync polarity for slave mode video */ + reg = lread32(&dp_regs->video_ctl10); + reg &= ~HSYNC_POLARITY_CFG; + reg |= (video_info->h_sync_polarity << H_S_POLARITY_CFG_SHIFT); + lwrite32(reg, &dp_regs->video_ctl10); + + /*Set video mode to slave mode */ + reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; + lwrite32(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_set_video_color_format(struct edp_video_info *video_info) +{ + u32 reg; + + /* Configure the input color depth, color space, dynamic range */ + reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) | + (video_info->color_depth << IN_BPC_SHIFT) | + (video_info->color_space << IN_COLOR_F_SHIFT); + lwrite32(reg, &dp_regs->video_ctl2); + + /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ + reg = lread32(&dp_regs->video_ctl3); + reg &= ~IN_YC_COEFFI_MASK; + if (video_info->ycbcr_coeff) + reg |= IN_YC_COEFFI_ITU709; + else + reg |= IN_YC_COEFFI_ITU601; + lwrite32(reg, &dp_regs->video_ctl3); +} + +unsigned int exynos_dp_is_slave_video_stream_clock_on(void) +{ + u32 reg; + + /* Update Video stream clk detect status */ + reg = lread32(&dp_regs->sys_ctl1); + lwrite32(reg, &dp_regs->sys_ctl1); + + reg = lread32(&dp_regs->sys_ctl1); + + if (!(reg & DET_STA)) { + printk(BIOS_DEBUG, "DP Input stream clock not detected.\n"); + return -1; + } + + return EXYNOS_DP_SUCCESS; +} + +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value) +{ + u32 reg; + + if (type == REGISTER_M) { + reg = lread32(&dp_regs->sys_ctl4); + reg |= FIX_M_VID; + lwrite32(reg, &dp_regs->sys_ctl4); + reg = M_VID0_CFG(m_value); + lwrite32(reg, &dp_regs->m_vid0); + reg = M_VID1_CFG(m_value); + lwrite32(reg, &dp_regs->m_vid1); + reg = M_VID2_CFG(m_value); + lwrite32(reg, &dp_regs->m_vid2); + + reg = N_VID0_CFG(n_value); + lwrite32(reg, &dp_regs->n_vid0); + reg = N_VID1_CFG(n_value); + lwrite32(reg, &dp_regs->n_vid1); + reg = N_VID2_CFG(n_value); + lwrite32(reg, &dp_regs->n_vid2); + } else { + reg = lread32(&dp_regs->sys_ctl4); + reg &= ~FIX_M_VID; + lwrite32(reg, &dp_regs->sys_ctl4); + } +} + +void exynos_dp_set_video_timing_mode(unsigned int type) +{ + u32 reg; + + reg = lread32(&dp_regs->video_ctl10); + reg &= ~FORMAT_SEL; + + if (type != VIDEO_TIMING_FROM_CAPTURE) + reg |= FORMAT_SEL; + + lwrite32(reg, &dp_regs->video_ctl10); +} + +void exynos_dp_enable_video_master(unsigned int enable) +{ + u32 reg; + + reg = lread32(&dp_regs->soc_general_ctl); + if (enable) { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE; + } else { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MODE_SLAVE_MODE; + } + + lwrite32(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_start_video(void) +{ + u32 reg; + + /* Enable Video input and disable Mute */ + reg = lread32(&dp_regs->video_ctl1); + reg |= VIDEO_EN; + lwrite32(reg, &dp_regs->video_ctl1); +} + +unsigned int exynos_dp_is_video_stream_on(void) +{ + u32 reg; + + /* Update STRM_VALID */ + reg = lread32(&dp_regs->sys_ctl3); + lwrite32(reg, &dp_regs->sys_ctl3); + + reg = lread32(&dp_regs->sys_ctl3); + + if (!(reg & STRM_VALID)) + return -1; + + return EXYNOS_DP_SUCCESS; +} + +void dp_phy_control(unsigned int enable) +{ + u32 cfg; + struct exynos5_power *power = samsung_get_base_power(); + + cfg = lread32(&power->dptx_phy_control); + if (enable) + cfg |= EXYNOS_DP_PHY_ENABLE; + else + cfg &= ~EXYNOS_DP_PHY_ENABLE; + lwrite32(cfg, &power->dptx_phy_control); +} diff --git a/src/cpu/samsung/exynos5420/fb.c b/src/cpu/samsung/exynos5420/fb.c deleted file mode 100644 index 3724a24..0000000 --- a/src/cpu/samsung/exynos5420/fb.c +++ /dev/null @@ -1,587 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * Copyright (C) 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* LCD driver for Exynos */ - -#include <arch/io.h> -#include <stdlib.h> -#include <string.h> -#include <timer.h> -#include <delay.h> -#include <console/console.h> -#include "cpu.h" -#include "power.h" -#include "sysreg.h" -#include <drivers/maxim/max77686/max77686.h> - -#include "device/i2c.h" -#include "i2c.h" -#include "fimd.h" -#include "dp.h" -#include "dp-core.h" - -/* - * Here is the rough outline of how we bring up the display: - * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD - * 2. Source determines video mode by reading DPCD receiver capability field - * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD - * 0000Dh). - * 3. Sink replies DPCD receiver capability field. - * 4. Source starts EDID read thru I2C-over-AUX. - * 5. Sink replies EDID thru I2C-over-AUX. - * 6. Source determines link configuration, such as MAX_LINK_RATE and - * MAX_LANE_COUNT. Source also determines which type of eDP Authentication - * method to use and writes DPCD link configuration field (DPCD 00100h to - * 0010Ah) including eDP configuration set (DPCD 0010Ah). - * 7. Source starts link training. Sink does clock recovery and equalization. - * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). - * 9. Sink replies DPCD link status field. If main link is not stable, Source - * repeats Step 7. - * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video - * parameters and recovers stream clock. - * 11. Source sends video data. - */ - -/* To help debug any init errors here, define a list of possible errors */ -enum { - ERR_PLL_NOT_UNLOCKED = 2, - ERR_VIDEO_CLOCK_BAD, - ERR_VIDEO_STREAM_BAD, - ERR_DPCD_READ_ERROR1, /* 5 */ - - ERR_DPCD_WRITE_ERROR1, - ERR_DPCD_READ_ERROR2, - ERR_DPCD_WRITE_ERROR2, - ERR_INVALID_LANE, - ERR_PLL_NOT_LOCKED, /* 10 */ - - ERR_PRE_EMPHASIS_LEVELS, - ERR_LINK_RATE_ABNORMAL, - ERR_MAX_LANE_COUNT_ABNORMAL, - ERR_LINK_TRAINING_FAILURE, - ERR_MISSING_DP_BASE, /* 15 */ - - ERR_NO_FDT_NODE, -}; -/* ok, this is stupid, but we're going to leave the variables in here until we - * know it works. One cleanup task at a time. - */ -enum stage_t { - STAGE_START = 0, - STAGE_LCD_VDD, - STAGE_BRIDGE_SETUP, - STAGE_BRIDGE_INIT, - STAGE_BRIDGE_RESET, - STAGE_HOTPLUG, - STAGE_DP_CONTROLLER, - STAGE_BACKLIGHT_VDD, - STAGE_BACKLIGHT_PWM, - STAGE_BACKLIGHT_EN, - STAGE_DONE, -}; - -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - -/* Bypass FIMD of DISP1_BLK */ -static void fimd_bypass(void) -{ - struct exynos5_sysreg *sysreg = samsung_get_base_sysreg(); - - setbits_le32(&sysreg->disp1blk_cfg, FIMDBYPASS_DISP1); - sysreg->disp1blk_cfg &= ~FIMDBYPASS_DISP1; -} - -/* - * Initialize display controller. - * - * @param lcdbase pointer to the base address of framebuffer. - * @pd pointer to the main panel_data structure - */ -void fb_init(unsigned long int fb_size, void *lcdbase, - struct exynos5_fimd_panel *pd) -{ - unsigned int val; - struct exynos5_fimd *fimd = samsung_get_base_fimd(); - struct exynos5_disp_ctrl *disp_ctrl = samsung_get_base_disp_ctrl(); - - fb_size = ALIGN(fb_size, 4096); - - writel(pd->ivclk | pd->fixvclk, &disp_ctrl->vidcon1); - val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET); - writel(val, &fimd->vidcon0); - - val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) | - (pd->lower_margin << V_FRONT_PORCH_OFFSET) | - (pd->upper_margin << V_BACK_PORCH_OFFSET); - writel(val, &disp_ctrl->vidtcon0); - - val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) | - (pd->right_margin << H_FRONT_PORCH_OFFSET) | - (pd->left_margin << H_BACK_PORCH_OFFSET); - writel(val, &disp_ctrl->vidtcon1); - - val = ((pd->xres - 1) << HOZVAL_OFFSET) | - ((pd->yres - 1) << LINEVAL_OFFSET); - writel(val, &disp_ctrl->vidtcon2); - - writel((unsigned int)lcdbase, &fimd->vidw00add0b0); - writel((unsigned int)lcdbase + fb_size, &fimd->vidw00add1b0); - - writel(pd->xres * 2, &fimd->vidw00add2); - - val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET); - val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET); - writel(val, &fimd->vidosd0b); - writel(pd->xres * pd->yres, &fimd->vidosd0c); - - setbits_le32(&fimd->shadowcon, CHANNEL0_EN); - - val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET; - val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN; - writel(val, &fimd->wincon0); - - /* DPCLKCON_ENABLE */ - writel(1 << 1, &fimd->dpclkcon); -} - -#ifdef UNUSED_CODE -void exynos_fimd_disable(void) -{ - struct exynos5_fimd *fimd = samsung_get_base_fimd(); - - writel(0, &fimd->wincon0); - clrbits_le32(&fimd->shadowcon, CHANNEL0_EN); -} -#endif - -/* - * Configure DP in slave mode and wait for video stream. - * - * param dp pointer to main s5p-dp structure - * param video_info pointer to main video_info structure. - * return status - */ -static int s5p_dp_config_video(struct s5p_dp_device *dp, - struct video_info *video_info) -{ - int timeout = 0; - struct exynos5_dp *base = dp->base; - struct mono_time start, current, end; - s5p_dp_config_video_slave_mode(dp, video_info); - - s5p_dp_set_video_color_format(dp, video_info->color_depth, - video_info->color_space, - video_info->dynamic_range, - video_info->ycbcr_coeff); - - if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - printk(BIOS_DEBUG, "PLL is not locked yet.\n"); - return -ERR_PLL_NOT_UNLOCKED; - } - - timer_monotonic_get(&start); - end = current = start; - mono_time_add_usecs(&end, STREAM_ON_TIMEOUT * USECS_PER_MSEC); - do { - if (s5p_dp_is_slave_video_stream_clock_on(dp) == 0) { - timeout++; - break; - } - timer_monotonic_get(¤t); - } while (mono_time_before(¤t, &end)); - - if (!timeout) { - printk(BIOS_ERR, "Video Clock Not ok after %ldus.\n", - mono_time_diff_microseconds(&start, &end)); - return -ERR_VIDEO_CLOCK_BAD; - } - - /* Set to use the register calculated M/N video */ - s5p_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0); - - clrbits_le32(&base->video_ctl_10, FORMAT_SEL); - - /* Disable video mute */ - clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); - - /* Configure video slave mode */ - s5p_dp_enable_video_master(dp); - - /* Enable video */ - setbits_le32(&base->video_ctl_1, VIDEO_EN); - timeout = s5p_dp_is_video_stream_on(dp); - - if (timeout) { - printk(BIOS_DEBUG, "Video Stream Not on\n"); - return -ERR_VIDEO_STREAM_BAD; - } - - return 0; -} - -/* - * Set DP to enhanced mode. We use this for EVT1 - * param dp pointer to main s5p-dp structure - * return status - */ -static int s5p_dp_enable_rx_to_enhanced_mode(struct s5p_dp_device *dp) -{ - u8 data; - - if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data)) { - printk(BIOS_DEBUG, "DPCD read error\n"); - return -ERR_DPCD_READ_ERROR1; - } - if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, - DPCD_ENHANCED_FRAME_EN | - (data & DPCD_LANE_COUNT_SET_MASK))) { - printk(BIOS_DEBUG, "DPCD write error\n"); - return -ERR_DPCD_WRITE_ERROR1; - } - - return 0; -} - -/* - * Enable scrambles mode. We use this for EVT1 - * param dp pointer to main s5p-dp structure - * return status - */ -static int s5p_dp_enable_scramble(struct s5p_dp_device *dp) -{ - u8 data; - struct exynos5_dp *base = dp->base; - - clrbits_le32(&base->dp_training_ptn_set, SCRAMBLING_DISABLE); - - if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, - &data)) { - printk(BIOS_DEBUG, "DPCD read error\n"); - return -ERR_DPCD_READ_ERROR2; - } - - if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, - (u8)(data & ~DPCD_SCRAMBLING_DISABLED))) { - printk(BIOS_DEBUG, "DPCD write error\n"); - return -ERR_DPCD_WRITE_ERROR2; - } - - return 0; -} - -/* - * Reset DP and prepare DP for init training - * param dp pointer to main s5p-dp structure - */ -static int s5p_dp_init_dp(struct s5p_dp_device *dp) -{ - int ret, i; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < DP_INIT_TRIES; i++) { - s5p_dp_reset(dp); - - /* SW defined function Normal operation */ - clrbits_le32(&base->func_en_1, SW_FUNC_EN_N); - - ret = s5p_dp_init_analog_func(dp); - if (!ret) - break; - - udelay(5000); - printk(BIOS_DEBUG, "LCD retry init, attempt=%d ret=%d\n", i, ret); - } - if (i == DP_INIT_TRIES) { - printk(BIOS_DEBUG, "LCD initialization failed, ret=%d\n", ret); - return ret; - } - - s5p_dp_init_aux(dp); - - return ret; -} - -/* - * Set pre-emphasis level - * param dp pointer to main s5p-dp structure - * param pre_emphasis pre-emphasis level - * param lane lane number(0 - 3) - * return status - */ -static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp, - int pre_emphasis, int lane) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = pre_emphasis << PRE_EMPHASIS_SET_SHIFT; - switch (lane) { - case 0: - writel(reg, &base->ln0_link_trn_ctl); - break; - case 1: - writel(reg, &base->ln1_link_trn_ctl); - break; - - case 2: - writel(reg, &base->ln2_link_trn_ctl); - break; - - case 3: - writel(reg, &base->ln3_link_trn_ctl); - break; - default: - printk(BIOS_DEBUG, "%s: Invalid lane %d\n", __func__, lane); - return -ERR_INVALID_LANE; - } - return 0; -} - -/* - * Read supported bandwidth type - * param dp pointer to main s5p-dp structure - * param bandwidth pointer to variable holding bandwidth type - */ -static void s5p_dp_get_max_rx_bandwidth(struct s5p_dp_device *dp, - u8 *bandwidth) -{ - u8 data; - - /* - * For DP rev.1.1, Maximum link rate of Main Link lanes - * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps - */ - s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data); - *bandwidth = data; -} - -/* - * Reset DP and prepare DP for init training - * param dp pointer to main s5p-dp structure - * param lane_count pointer to variable holding no of lanes - */ -static void s5p_dp_get_max_rx_lane_count(struct s5p_dp_device *dp, - u8 *lane_count) -{ - u8 data; - - /* - * For DP rev.1.1, Maximum number of Main Link lanes - * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes - */ - s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data); - *lane_count = data & DPCD_MAX_LANE_COUNT_MASK; -} - -/* - * DP H/w Link Training. Set DPCD link rate and bandwidth. - * param dp pointer to main s5p-dp structure - * param max_lane No of lanes - * param max_rate bandwidth - * return status - */ -static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, - unsigned int max_lane, - unsigned int max_rate) -{ - int pll_is_locked = 0; - u32 data; - int lane; - struct mono_time current, end; - struct exynos5_dp *base = dp->base; - - /* Stop Video */ - clrbits_le32(&base->video_ctl_1, VIDEO_EN); - - timer_monotonic_get(¤t); - end = current; - mono_time_add_msecs(&end, PLL_LOCK_TIMEOUT); - - while ((pll_is_locked = s5p_dp_get_pll_lock_status(dp)) == PLL_UNLOCKED) { - if (mono_time_after(¤t, &end)) { - /* Ignore this error, and try to continue */ - printk(BIOS_ERR, "PLL is not locked yet.\n"); - break; - } - timer_monotonic_get(¤t); - } - printk(BIOS_SPEW, "PLL is %slocked\n", - pll_is_locked == PLL_LOCKED ? "": "not "); - /* Reset Macro */ - setbits_le32(&base->dp_phy_test, MACRO_RST); - - /* 10 us is the minimum reset time. */ - udelay(10); - - clrbits_le32(&base->dp_phy_test, MACRO_RST); - - /* Set TX pre-emphasis to minimum */ - for (lane = 0; lane < max_lane; lane++) - if (s5p_dp_set_lane_lane_pre_emphasis(dp, - PRE_EMPHASIS_LEVEL_0, lane)) { - printk(BIOS_DEBUG, "Unable to set pre emphasis level\n"); - return -ERR_PRE_EMPHASIS_LEVELS; - } - - /* All DP analog module power up */ - writel(0x00, &base->dp_phy_pd); - - /* Initialize by reading RX's DPCD */ - s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate); - s5p_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); - - printk(BIOS_SPEW, "%s: rate 0x%x, lane_count %d\n", __func__, - dp->link_train.link_rate, dp->link_train.lane_count); - - if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { - printk(BIOS_DEBUG, "Rx Max Link Rate is abnormal :%x !\n", - dp->link_train.link_rate); - /* Not Retrying */ - return -ERR_LINK_RATE_ABNORMAL; - } - - if (dp->link_train.lane_count == 0) { - printk(BIOS_DEBUG, "Rx Max Lane count is abnormal :%x !\n", - dp->link_train.lane_count); - /* Not retrying */ - return -ERR_MAX_LANE_COUNT_ABNORMAL; - } - - /* Setup TX lane count & rate */ - if (dp->link_train.lane_count > max_lane) - dp->link_train.lane_count = max_lane; - if (dp->link_train.link_rate > max_rate) - dp->link_train.link_rate = max_rate; - - /* Set link rate and count as you want to establish*/ - writel(dp->link_train.lane_count, &base->lane_count_set); - writel(dp->link_train.link_rate, &base->link_bw_set); - - /* Set sink to D0 (Sink Not Ready) mode. */ - s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE, - DPCD_SET_POWER_STATE_D0); - - /* Start HW link training */ - writel(HW_TRAINING_EN, &base->dp_hw_link_training); - - /* Wait until HW link training done */ - s5p_dp_wait_hw_link_training_done(dp); - - /* Get hardware link training status */ - data = readl(&base->dp_hw_link_training); - printk(BIOS_SPEW, "hardware link training status: 0x%08x\n", data); - if (data != 0) { - printk(BIOS_ERR, " H/W link training failure: 0x%x\n", data); - return -ERR_LINK_TRAINING_FAILURE; - } - - /* Get Link Bandwidth */ - data = readl(&base->link_bw_set); - - dp->link_train.link_rate = data; - - data = readl(&base->lane_count_set); - dp->link_train.lane_count = data; - printk(BIOS_SPEW, "Done training: Link bandwidth: 0x%x, lane_count: %d\n", - dp->link_train.link_rate, data); - - return 0; -} - -/* - * Initialize DP display - */ -int dp_controller_init(struct s5p_dp_device *dp_device) -{ - int ret; - struct s5p_dp_device *dp = dp_device; - struct exynos5_dp *base; - - clock_init_dp_clock(); - - power_enable_dp_phy(); - ret = s5p_dp_init_dp(dp); - if (ret) { - printk(BIOS_ERR, "%s: Could not initialize dp\n", __func__); - return ret; - } - - ret = s5p_dp_hw_link_training(dp, dp->video_info->lane_count, - dp->video_info->link_rate); - if (ret) { - printk(BIOS_ERR, "unable to do link train\n"); - return ret; - } - /* Minimum delay after H/w Link training */ - udelay(1000); - - ret = s5p_dp_enable_scramble(dp); - if (ret) { - printk(BIOS_ERR, "unable to set scramble mode\n"); - return ret; - } - - ret = s5p_dp_enable_rx_to_enhanced_mode(dp); - if (ret) { - printk(BIOS_ERR, "unable to set enhanced mode\n"); - return ret; - } - - - base = dp->base; - /* Enable enhanced mode */ - setbits_le32(&base->sys_ctl_4, ENHANCED); - - writel(dp->link_train.lane_count, &base->lane_count_set); - writel(dp->link_train.link_rate, &base->link_bw_set); - - s5p_dp_init_video(dp); - ret = s5p_dp_config_video(dp, dp->video_info); - if (ret) { - printk(BIOS_ERR, "unable to config video\n"); - return ret; - } - - return 0; -} - -/** - * Init the LCD controller - * - * @param lcdbase Base address of LCD frame buffer - * @return 0 if ok, -ve error code on error - */ -int lcd_ctrl_init(unsigned long int fb_size, - struct exynos5_fimd_panel *panel_data, void *lcdbase) -{ - int ret = 0; - - fimd_bypass(); - fb_init(fb_size, lcdbase, panel_data); - return ret; -} diff --git a/src/cpu/samsung/exynos5420/fimd.c b/src/cpu/samsung/exynos5420/fimd.c new file mode 100644 index 0000000..b94148a --- /dev/null +++ b/src/cpu/samsung/exynos5420/fimd.c @@ -0,0 +1,450 @@ +/* + * Copyright 2013 Google Inc. + * Copyright (C) 2012 Samsung Electronics + * + * Author: InKi Dae inki.dae@samsung.com + * Author: Donghwa Lee dh09.lee@samsung.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <delay.h> +#include "timer.h" +#include "clk.h" +#include "cpu.h" +#include "periph.h" +#include "dp.h" +#include "fimd.h" +#include "sysreg.h" + +/* left here because it's a counterexample of good style. u-boot + * likes to call a function to get a base address. To get that they + * walk the device tree several times. It's costly. So they turn a + * known-at-build-time constant into a bunch of function calls. What + * to do about this inefficiency? Fix the inefficiency? No, scarf + * variables away in global memory of course, and remove all hope of + * optimization. Bad idea. + * + * the u-boot sources that define fimd base are ... bizarre. I'm going + * with a hardcoded hack until we get this working. FIXME. + * + * static struct exynos_fb *fimd_ctrl * = + * (void *)0x14400000; //samsung_get_base_fimd(); + */ + +/* fairly useful debugging stuff. */ +#if 0 +static inline void fwadl(unsigned long l,void *v) { + writel(l, v); + printk(BIOS_SPEW, "W %p %p\n", v, (void *)l); +} +#define lwritel(a,b) fwadl((unsigned long)(a), (void *)(b)) + +static inline unsigned long fradl(void *v) { + unsigned long l = readl(v); + printk(BIOS_SPEW, "R %p %p\n", v, (void *)l); + return l; +} + +#define lreadl(a) fradl((void *)(a)) + +#else +#define lwritel(a,b) writel((unsigned long)(a), (void *)(b)) +#define lreadl(a) readl((void *)(a)) +#endif + +/* not sure where we want this so ... */ +static unsigned long get_lcd_clk(void) +{ + struct exynos5420_clock *clk = samsung_get_base_clock(); + u32 pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_DISP10 + * CLKMUX_FIMD1 [4] + * 0: SCLK_RPLL + * 1: SCLK_SPLL + */ + sel = lreadl(&clk->clk_src_disp10); + sel &= (1 << 4); + + if (sel){ + sclk = get_pll_clk(SPLL); + } else { + sclk = get_pll_clk(RPLL); + } + + /* + * CLK_DIV_DISP10 + * FIMD1_RATIO [3:0] + */ + ratio = lreadl(&clk->clk_div_disp10); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + +static void exynos_fimd_set_dualrgb(vidinfo_t *vid, unsigned int enabled) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %s\n", __func__, enabled ? "enabled" : "not enabled"); + if (enabled) { + cfg = EXYNOS_DUALRGB_BYPASS_DUAL | EXYNOS_DUALRGB_LINESPLIT | + EXYNOS_DUALRGB_VDEN_EN_ENABLE; + + /* in case of Line Split mode, MAIN_CNT doesn't neet to set. */ + cfg |= EXYNOS_DUALRGB_SUB_CNT(vid->vl_col / 2) | + EXYNOS_DUALRGB_MAIN_CNT(0); + } + + lwritel(cfg, &FIMD_CTRL->dualrgb); +} + +static void exynos_fimd_set_dp_clkcon(unsigned int enabled) +{ + unsigned int cfg = 0; + + if (enabled){ + cfg = EXYNOS_DP_CLK_ENABLE; + } + + lwritel(cfg, &FIMD_CTRL->dp_mie_clkcon); +} + +static void exynos_fimd_set_par(vidinfo_t *vid, unsigned int win_id) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + /* set window control */ + cfg = lreadl(&FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg &= ~(EXYNOS_WINCON_BITSWP_ENABLE | EXYNOS_WINCON_BYTESWP_ENABLE | + EXYNOS_WINCON_HAWSWP_ENABLE | EXYNOS_WINCON_WSWP_ENABLE | + EXYNOS_WINCON_BURSTLEN_MASK | EXYNOS_WINCON_BPPMODE_MASK | + EXYNOS_WINCON_INRGB_MASK | EXYNOS_WINCON_DATAPATH_MASK); + + /* DATAPATH is DMA */ + cfg |= EXYNOS_WINCON_DATAPATH_DMA; + + cfg |= EXYNOS_WINCON_HAWSWP_ENABLE; + + /* dma burst is 16 */ + cfg |= EXYNOS_WINCON_BURSTLEN_16WORD; + + cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565; + + lwritel(cfg, &FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + /* set window position to x=0, y=0*/ + cfg = EXYNOS_VIDOSD_LEFT_X(0) | EXYNOS_VIDOSD_TOP_Y(0); + lwritel(cfg, &FIMD_CTRL->vidosd0a + + EXYNOS_VIDOSD(win_id)); + + cfg = EXYNOS_VIDOSD_RIGHT_X(vid->vl_col - 1) | + EXYNOS_VIDOSD_BOTTOM_Y(vid->vl_row - 1) | + EXYNOS_VIDOSD_RIGHT_X_E(1) | + EXYNOS_VIDOSD_BOTTOM_Y_E(0); + + lwritel(cfg, &FIMD_CTRL->vidosd0b + + EXYNOS_VIDOSD(win_id)); + /* set window size for window0*/ + cfg = EXYNOS_VIDOSD_SIZE(vid->vl_col * vid->vl_row); + lwritel(cfg, &FIMD_CTRL->vidosd0c + + EXYNOS_VIDOSD(win_id)); +} + +static void exynos_fimd_set_buffer_address(vidinfo_t *vid, + void *screen_base, int win_id) +{ + u32 start_addr, end_addr; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + start_addr = (u32)screen_base; + end_addr = start_addr + ((vid->vl_col * ((1<<vid->vl_bpix) / 8)) * + vid->vl_row); + + lwritel(start_addr, &FIMD_CTRL->vidw00add0b0 + + EXYNOS_BUFFER_OFFSET(win_id)); + lwritel(end_addr, &FIMD_CTRL->vidw00add1b0 + + EXYNOS_BUFFER_OFFSET(win_id)); +} + +static void exynos_fimd_set_clock(vidinfo_t *vid) +{ + unsigned int cfg = 0, div = 0, remainder = 0, remainder_div; + unsigned long pixel_clock; + unsigned long long src_clock; + printk(BIOS_SPEW, "%s\n", __func__); + if (vid->dual_lcd_enabled) { + pixel_clock = vid->vl_freq * + (vid->vl_hspw + vid->vl_hfpd + + vid->vl_hbpd + vid->vl_col / 2) * + (vid->vl_vspw + vid->vl_vfpd + + vid->vl_vbpd + vid->vl_row); + } else if (vid->interface_mode == FIMD_CPU_INTERFACE) { + pixel_clock = vid->vl_freq * + vid->vl_width * vid->vl_height * + (vid->cs_setup + vid->wr_setup + + vid->wr_act + vid->wr_hold + 1); + } else { + pixel_clock = vid->vl_freq * + (vid->vl_hspw + vid->vl_hfpd + + vid->vl_hbpd + vid->vl_col) * + (vid->vl_vspw + vid->vl_vfpd + + vid->vl_vbpd + vid->vl_row); + } + printk(BIOS_SPEW, "Pixel clock is %lx\n", pixel_clock); + + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg &= ~(EXYNOS_VIDCON0_CLKSEL_MASK | EXYNOS_VIDCON0_CLKVALUP_MASK | + EXYNOS_VIDCON0_CLKVAL_F(0xFF) | EXYNOS_VIDCON0_VCLKEN_MASK | + EXYNOS_VIDCON0_CLKDIR_MASK); + cfg |= (EXYNOS_VIDCON0_CLKSEL_SCLK | EXYNOS_VIDCON0_CLKVALUP_ALWAYS | + EXYNOS_VIDCON0_VCLKEN_NORMAL | EXYNOS_VIDCON0_CLKDIR_DIVIDED); + + src_clock = (unsigned long long) get_lcd_clk(); + + /* get quotient and remainder. */ + remainder = src_clock % pixel_clock; + src_clock /= pixel_clock; + + div = src_clock; + + remainder *= 10; + remainder_div = remainder / pixel_clock; + + /* round about one places of decimals. */ + if (remainder_div >= 5) + div++; + + /* in case of dual lcd mode. */ + if (vid->dual_lcd_enabled) + div--; + + cfg |= EXYNOS_VIDCON0_CLKVAL_F(div - 1); + lwritel(cfg, &FIMD_CTRL->vidcon0); +} + +void exynos_set_trigger(void) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s\n", __func__); + cfg = lreadl(&FIMD_CTRL->trigcon); + + cfg |= (EXYNOS_I80SOFT_TRIG_EN | EXYNOS_I80START_TRIG); + + lwritel(cfg, &FIMD_CTRL->trigcon); +} + +int exynos_is_i80_frame_done(void) +{ + unsigned int cfg = 0; + int status; + printk(BIOS_SPEW, "%s\n", __func__); + cfg = lreadl(&FIMD_CTRL->trigcon); + + /* frame done func is valid only when TRIMODE[0] is set to 1. */ + status = (cfg & EXYNOS_I80STATUS_TRIG_DONE) == + EXYNOS_I80STATUS_TRIG_DONE; + + return status; +} + +static void exynos_fimd_lcd_on(void) +{ + unsigned int cfg = 0; + + printk(BIOS_SPEW, "%s\n", __func__); + /* display on */ + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg |= (EXYNOS_VIDCON0_ENVID_ENABLE | EXYNOS_VIDCON0_ENVID_F_ENABLE); + lwritel(cfg, &FIMD_CTRL->vidcon0); +} + +static void exynos_fimd_window_on(unsigned int win_id) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + /* enable window */ + cfg = lreadl(&FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + cfg |= EXYNOS_WINCON_ENWIN_ENABLE; + lwritel(cfg, &FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg = lreadl(&FIMD_CTRL->winshmap); + cfg |= EXYNOS_WINSHMAP_CH_ENABLE(win_id); + lwritel(cfg, &FIMD_CTRL->winshmap); + cfg = lreadl(&FIMD_CTRL->winshmap); +} + +void exynos_fimd_lcd_off(void) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s\n", __func__); + + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg &= (EXYNOS_VIDCON0_ENVID_DISABLE | EXYNOS_VIDCON0_ENVID_F_DISABLE); + lwritel(cfg, &FIMD_CTRL->vidcon0); +} + +void exynos_fimd_window_off(unsigned int win_id) +{ + unsigned int cfg = 0; + printk(BIOS_SPEW, "%s %d\n", __func__, win_id); + + cfg = lreadl(&FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + cfg &= EXYNOS_WINCON_ENWIN_DISABLE; + lwritel(cfg, &FIMD_CTRL->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg = lreadl(&FIMD_CTRL->winshmap); + cfg &= ~EXYNOS_WINSHMAP_CH_DISABLE(win_id); + lwritel(cfg, &FIMD_CTRL->winshmap); +} + +static void exynos5_set_system_display(void) +{ + struct exynos5_sysreg *sysreg = samsung_get_base_sysreg(); + unsigned int cfg = 0; + + /* + * system register path set + * 0: MIE/MDNIE + * 1: FIMD Bypass + */ + cfg = lreadl(&sysreg->disp1blk_cfg); + cfg |= (1 << 15); + lwritel(cfg, &sysreg->disp1blk_cfg); +} + +void exynos_fimd_lcd_init(vidinfo_t *vid) +{ + unsigned int cfg = 0, rgb_mode; + unsigned int offset; + + offset = exynos_fimd_get_base_offset(); + printk(BIOS_SPEW, "%s\n", __func__); + exynos5_set_system_display(); + + rgb_mode = vid->rgb_mode; + + if (vid->interface_mode == FIMD_RGB_INTERFACE) { + printk(BIOS_SPEW, "%s FIMD_RGB_INTERFACE\n", __func__); + + cfg |= EXYNOS_VIDCON0_VIDOUT_RGB; + lwritel(cfg, &FIMD_CTRL->vidcon0); + + cfg = lreadl(&FIMD_CTRL->vidcon2); + cfg &= ~(EXYNOS_VIDCON2_WB_MASK | + EXYNOS_VIDCON2_TVFORMATSEL_MASK | + EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK); + cfg |= EXYNOS_VIDCON2_WB_DISABLE; + lwritel(cfg, &FIMD_CTRL->vidcon2); + + /* set polarity */ + cfg = 0; + if (!vid->vl_clkp) + cfg |= EXYNOS_VIDCON1_IVCLK_RISING_EDGE; + if (!vid->vl_hsp) + cfg |= EXYNOS_VIDCON1_IHSYNC_INVERT; + if (!vid->vl_vsp) + cfg |= EXYNOS_VIDCON1_IVSYNC_INVERT; + if (!vid->vl_dp) + cfg |= EXYNOS_VIDCON1_IVDEN_INVERT; + + lwritel(cfg, &FIMD_CTRL->vidcon1 + offset); + + /* set timing */ + cfg = EXYNOS_VIDTCON0_VFPD(vid->vl_vfpd - 1); + cfg |= EXYNOS_VIDTCON0_VBPD(vid->vl_vbpd - 1); + cfg |= EXYNOS_VIDTCON0_VSPW(vid->vl_vspw - 1); + lwritel(cfg, &FIMD_CTRL->vidtcon0 + offset); + + cfg = EXYNOS_VIDTCON1_HFPD(vid->vl_hfpd - 1); + cfg |= EXYNOS_VIDTCON1_HBPD(vid->vl_hbpd - 1); + cfg |= EXYNOS_VIDTCON1_HSPW(vid->vl_hspw - 1); + + lwritel(cfg, &FIMD_CTRL->vidtcon1 + offset); + + /* set lcd size */ + cfg = EXYNOS_VIDTCON2_HOZVAL(vid->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL(vid->vl_row - 1) | + EXYNOS_VIDTCON2_HOZVAL_E(vid->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL_E(vid->vl_row - 1); + + lwritel(cfg, &FIMD_CTRL->vidtcon2 + offset); + } + + /* set display mode */ + cfg = lreadl(&FIMD_CTRL->vidcon0); + cfg &= ~EXYNOS_VIDCON0_PNRMODE_MASK; + cfg |= (rgb_mode << EXYNOS_VIDCON0_PNRMODE_SHIFT); + lwritel(cfg, &FIMD_CTRL->vidcon0); + + /* set par */ + exynos_fimd_set_par(vid, vid->win_id); + + /* set memory address */ + exynos_fimd_set_buffer_address(vid, vid->screen_base, vid->win_id); + + /* set buffer size */ + cfg = EXYNOS_VIDADDR_PAGEWIDTH(vid->vl_col * (1<<vid->vl_bpix) / 8) | + EXYNOS_VIDADDR_PAGEWIDTH_E(vid->vl_col * (1<<vid->vl_bpix) / 8) | + EXYNOS_VIDADDR_OFFSIZE(0) | + EXYNOS_VIDADDR_OFFSIZE_E(0); + + lwritel(cfg, &FIMD_CTRL->vidw00add2 + + EXYNOS_BUFFER_SIZE(vid->win_id)); + + /* set clock */ + exynos_fimd_set_clock(vid); + + /* set rgb mode to dual lcd. */ + exynos_fimd_set_dualrgb(vid, vid->dual_lcd_enabled); + + /* display on */ + exynos_fimd_lcd_on(); + + /* window on */ + exynos_fimd_window_on(vid->win_id); + + exynos_fimd_set_dp_clkcon(vid->dp_enabled); + exynos5_set_system_display(); + printk(BIOS_SPEW, "%s: done\n", __func__); +} + +unsigned long exynos_fimd_calc_fbsize(vidinfo_t *vid) +{ + printk(BIOS_SPEW, "%s\n", __func__); + return vid->vl_col * vid->vl_row * ((1<<vid->vl_bpix) / 8); +} + +void exynos_fimd_lcd_disable(void) +{ + int i; + printk(BIOS_SPEW, "%s\n", __func__); + + for (i = 0; i < 4; i++) + exynos_fimd_window_off(i); +} diff --git a/src/cpu/samsung/exynos5420/fimd.h b/src/cpu/samsung/exynos5420/fimd.h index 661ed9e..7d68979 100644 --- a/src/cpu/samsung/exynos5420/fimd.h +++ b/src/cpu/samsung/exynos5420/fimd.h @@ -25,39 +25,39 @@ /* FIMD register map */ struct exynos5_fimd { /* This is an incomplete list. Add registers as and when required */ - unsigned int vidcon0; - unsigned char res1[0x1c]; - unsigned int wincon0; - unsigned int wincon1; - unsigned int wincon2; - unsigned int wincon3; - unsigned int wincon4; - unsigned int shadowcon; - unsigned char res2[0x8]; - unsigned int vidosd0a; - unsigned int vidosd0b; - unsigned int vidosd0c; - unsigned char res3[0x54]; - unsigned int vidw00add0b0; - unsigned char res4[0x2c]; - unsigned int vidw00add1b0; - unsigned char res5[0x2c]; - unsigned int vidw00add2; - unsigned char res6[0x3c]; - unsigned int w1keycon0; - unsigned int w1keycon1; - unsigned int w2keycon0; - unsigned int w2keycon1; - unsigned int w3keycon0; - unsigned int w3keycon1; - unsigned int w4keycon0; - unsigned int w4keycon1; - unsigned char res7[0x20]; - unsigned int win0map; - unsigned char res8[0xdc]; - unsigned int blendcon; - unsigned char res9[0x18]; - unsigned int dpclkcon; + u32 vidcon0; + u8 res1[0x1c]; + u32 wincon0; + u32 wincon1; + u32 wincon2; + u32 wincon3; + u32 wincon4; + u32 shadowcon; + u8 res2[0x8]; + u32 vidosd0a; + u32 vidosd0b; + u32 vidosd0c; + u8 res3[0x54]; + u32 vidw00add0b0; + u8 res4[0x2c]; + u32 vidw00add1b0; + u8 res5[0x2c]; + u32 vidw00add2; + u8 res6[0x3c]; + u32 w1keycon0; + u32 w1keycon1; + u32 w2keycon0; + u32 w2keycon1; + u32 w3keycon0; + u32 w3keycon1; + u32 w4keycon0; + u32 w4keycon1; + u8 res7[0x20]; + u32 win0map; + u8 res8[0xdc]; + u32 blendcon; + u8 res9[0x18]; + u32 dpclkcon; };
#define W0_SHADOW_PROTECT (0x1 << 10) @@ -86,7 +86,7 @@ struct exynos5_fimd_panel { unsigned int upper_margin; /* Vertical Backporch */ unsigned int lower_margin; /* Vertical frontporch */ unsigned int vsync; /* Vertical Sync Pulse Width */ - unsigned int left_margin; /* Horizantal Backporch */ + unsigned int left_margin; /* Horizontal Backporch */ unsigned int right_margin; /* Horizontal Frontporch */ unsigned int hsync; /* Horizontal Sync Pulse Width */ unsigned int xres; /* X Resolution */ @@ -95,15 +95,15 @@ struct exynos5_fimd_panel {
/* LCDIF Register Map */ struct exynos5_disp_ctrl { - unsigned int vidout_con; - unsigned int vidcon1; - unsigned char res1[0x8]; - unsigned int vidtcon0; - unsigned int vidtcon1; - unsigned int vidtcon2; - unsigned int vidtcon3; - unsigned char res2[0x184]; - unsigned int trigcon; + u32 vidout_con; + u32 vidcon1; + u8 res1[0x8]; + u32 vidtcon0; + u32 vidtcon1; + u32 vidtcon2; + u32 vidtcon3; + u8 res2[0x184]; + u32 trigcon; };
#define VCLK_RISING_EDGE (1 << 7) @@ -135,4 +135,79 @@ struct exynos5_disp_ctrl {
#define OSD_RIGHTBOTX_F_OFFSET 11 #define OSD_RIGHTBOTY_F_OFFSET 0 + +#define FIMD_CTRL ((struct exynos_fb *)0x14400000) + +/* from u-boot fb.h. It needs to be merged with these dp structs maybe. */ +enum { + FIMD_RGB_INTERFACE = 1, + FIMD_CPU_INTERFACE = 2, +}; + +enum exynos_fb_rgb_mode_t { + MODE_RGB_P = 0, + MODE_BGR_P = 1, + MODE_RGB_S = 2, + MODE_BGR_S = 3, +}; + +typedef struct vidinfo { + u16 vl_col; /* Number of columns (i.e. 640) */ + u16 vl_row; /* Number of rows (i.e. 480) */ + u16 vl_width; /* Width of display area in millimeters */ + u16 vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u8 vl_freq; /* Frequency */ + u8 vl_clkp; /* Clock polarity */ + u8 vl_oep; /* Output Enable polarity */ + u8 vl_hsp; /* Horizontal Sync polarity */ + u8 vl_vsp; /* Vertical Sync polarity */ + u8 vl_dp; /* Data polarity */ + u8 vl_bpix; /* Bits per pixel */ + + /* Horizontal control register. Timing from data sheet */ + u8 vl_hspw; /* Horz sync pulse width */ + u8 vl_hfpd; /* Wait before of line */ + u8 vl_hbpd; /* Wait end of line */ + + /* Vertical control register. */ + u8 vl_vspw; /* Vertical sync pulse width */ + u8 vl_vfpd; /* Wait before of frame */ + u8 vl_vbpd; /* Wait end of frame */ + u8 vl_cmd_allow_len; /* Wait end of frame */ + + unsigned int win_id; + unsigned int init_delay; + unsigned int power_on_delay; + unsigned int reset_delay; + unsigned int interface_mode; + unsigned int mipi_enabled; + unsigned int dp_enabled; + unsigned int cs_setup; + unsigned int wr_setup; + unsigned int wr_act; + unsigned int wr_hold; + unsigned int rgb_mode; + unsigned int resolution; + + /* parent clock name(MPLL, EPLL or VPLL) */ + unsigned int pclk_name; + /* ratio value for source clock from parent clock. */ + unsigned int sclk_div; + + unsigned int dual_lcd_enabled; + void *screen_base; + void *cmap; /* Points at 8 to 16 bit conversion map. */ +} vidinfo_t; + +/* fimd.c */ +void exynos_set_trigger(void); +int exynos_is_i80_frame_done(void); +void exynos_fimd_lcd_off(void); +void exynos_fimd_window_off(unsigned int win_id); +unsigned long exynos_fimd_calc_fbsize(vidinfo_t *vid); +void exynos_fimd_lcd_disable(void); +void exynos_fimd_lcd_init(vidinfo_t *vid); + #endif diff --git a/src/cpu/samsung/exynos5420/power.c b/src/cpu/samsung/exynos5420/power.c index 18e0299..3215462 100644 --- a/src/cpu/samsung/exynos5420/power.c +++ b/src/cpu/samsung/exynos5420/power.c @@ -64,7 +64,7 @@ void power_enable_dp_phy(void) struct exynos5_power *power = samsung_get_base_power();
- setbits_le32(&power->dptx_phy_control, DPTX_PHY_ENABLE); + setbits_le32(&power->dptx_phy_control, EXYNOS_DP_PHY_ENABLE); }
void power_enable_usb_phy(void) diff --git a/src/cpu/samsung/exynos5420/power.h b/src/cpu/samsung/exynos5420/power.h index 3c019d6..665e94c 100644 --- a/src/cpu/samsung/exynos5420/power.h +++ b/src/cpu/samsung/exynos5420/power.h @@ -32,7 +32,7 @@ void power_enable_hw_thermal_trip(void); #define POWER_PS_HOLD_CONTROL_DATA_HIGH (1 << 8) #define POWER_ENABLE_HW_TRIP (1UL << 31)
-#define DPTX_PHY_ENABLE (1 << 0) +#define EXYNOS_DP_PHY_ENABLE (1 << 0)
/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */ #define PMU_DEBUG_XXTI 0x1000 diff --git a/src/lib/edid.c b/src/lib/edid.c index b2bd9b7..4be0dc6 100644 --- a/src/lib/edid.c +++ b/src/lib/edid.c @@ -1448,12 +1448,12 @@ void set_vbe_mode_info_valid(struct edid *edid, uintptr_t fb_addr) break; case 16: /* packed into 2-byte words */ - edid_fb.red_mask_pos = 12; - edid_fb.red_mask_size = 4; - edid_fb.green_mask_pos = 8; - edid_fb.green_mask_size = 4; + edid_fb.red_mask_pos = 11; + edid_fb.red_mask_size = 5; + edid_fb.green_mask_pos = 5; + edid_fb.green_mask_size = 6; edid_fb.blue_mask_pos = 0; - edid_fb.blue_mask_size = 4; + edid_fb.blue_mask_size = 5; break; default: printk(BIOS_SPEW, "%s: unsupported BPP %d\n", __func__, diff --git a/src/mainboard/google/kirby/mainboard.c b/src/mainboard/google/kirby/mainboard.c index 064d0f1..9de916f 100644 --- a/src/mainboard/google/kirby/mainboard.c +++ b/src/mainboard/google/kirby/mainboard.c @@ -33,7 +33,7 @@ #include <cpu/samsung/exynos5420/gpio.h> #include <cpu/samsung/exynos5420/power.h> #include <cpu/samsung/exynos5420/i2c.h> -#include <cpu/samsung/exynos5420/dp-core.h> +#include <cpu/samsung/exynos5420/dp.h> #include <drivers/parade/ps8625/ps8625.h> #include <ec/google/chromeec/ec.h> #include <stdlib.h> diff --git a/src/mainboard/google/pit/mainboard.c b/src/mainboard/google/pit/mainboard.c index 5c67df2..f25c2a5 100644 --- a/src/mainboard/google/pit/mainboard.c +++ b/src/mainboard/google/pit/mainboard.c @@ -17,6 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
+#include <string.h> #include <console/console.h> #include <device/device.h> #include <device/i2c.h> @@ -33,7 +34,8 @@ #include <cpu/samsung/exynos5420/gpio.h> #include <cpu/samsung/exynos5420/power.h> #include <cpu/samsung/exynos5420/i2c.h> -#include <cpu/samsung/exynos5420/dp-core.h> +#include <cpu/samsung/exynos5420/dp.h> +#include <cpu/samsung/exynos5420/fimd.h> #include <drivers/parade/ps8625/ps8625.h> #include <ec/google/chromeec/ec.h> #include <stdlib.h> @@ -52,6 +54,64 @@ static struct edid edid = { .bytes_per_line = 2 * 1366 };
+/* from the fdt */ +static struct vidinfo vidinfo = { + .vl_freq = 60, + .vl_col = 1366, + .vl_row = 768, + .vl_width = 1366, + .vl_height = 768, + .vl_clkp = 1, + .vl_dp = 1, + .vl_bpix = 4, + .vl_hspw = 32, + .vl_hbpd = 40, + .vl_hfpd = 40, + .vl_vspw = 6, + .vl_vbpd = 10, + .vl_vfpd = 12, + .vl_cmd_allow_len = 0xf, + .win_id = 3, + .dp_enabled = 1, + .dual_lcd_enabled = 0, + .interface_mode = FIMD_RGB_INTERFACE, +}; + +static unsigned char panel_edid[] = { + 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00, + 0x06,0xaf,0x5c,0x31,0x00,0x00,0x00,0x00, + 0x00,0x16,0x01,0x03,0x80,0x1a,0x0e,0x78, + 0x0a,0x99,0x85,0x95,0x55,0x56,0x92,0x28, + 0x22,0x50,0x54,0x00,0x00,0x00,0x01,0x01, + 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, + 0x01,0x01,0x01,0x01,0x01,0x01,0xa3,0x1b, + 0x56,0x7e,0x50,0x00,0x16,0x30,0x30,0x20, + 0x36,0x00,0x00,0x90,0x10,0x00,0x00,0x18, + 0x6d,0x12,0x56,0x7e,0x50,0x00,0x16,0x30, + 0x30,0x20,0x36,0x00,0x00,0x90,0x10,0x00, + 0x00,0x18,0x00,0x00,0x00,0xfe,0x00,0x41, + 0x55,0x4f,0x0a,0x20,0x20,0x20,0x20,0x20, + 0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xfe, + 0x00,0x42,0x31,0x31,0x36,0x58,0x57,0x30, + 0x33,0x20,0x56,0x31,0x20,0x0a,0x00,0x3d, + 0x00,0xc0,0x00,0x00,0x27,0xfd,0x00,0x20, + 0x02,0x59,0x07,0x00,0x64,0x3e,0x07,0x02, + 0x00,0x00,0xcd,0x12,0x59,0xff,0x10,0x03, + 0x00,0x00,0x00,0x00,0x64,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x05,0x00,0x00,0x00, + 0x9c,0x3f,0x07,0x02,0x31,0xf9,0x00,0x20, + 0x59,0xff,0x10,0x03,0x00,0x00,0x00,0x00, + 0xbc,0x3e,0x07,0x02,0xc0,0x9b,0x01,0x20, + 0x00,0x00,0x00,0x00,0xdb,0xf8,0x00,0x20, + 0x98,0x3e,0x07,0x02,0x8b,0xaf,0x00,0x20, + 0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0xe5,0xcd,0x16,0x00,0xe9,0xcd,0x16,0x00, + 0xe8,0x03,0x00,0x00,0x6c,0x55,0x01,0x20, + 0x2c,0x01,0x00,0x00,0x85,0xbb,0x00,0x20, + 0xe8,0x03,0x00,0x00,0xe9,0xcd,0x16,0x00, +}; + static const struct parade_write parade_writes[] = { { 0x02, 0xa1, 0x01 }, /* HPD low */ /* @@ -176,6 +236,8 @@ static enum exynos5_gpio_pin bl_en = GPIO_X22; /* active high */
static void parade_dp_bridge_setup(void) { + int i; + gpio_set_value(dp_pd_l, 1); gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT); gpio_set_pull(dp_pd_l, GPIO_PULL_NONE); @@ -186,6 +248,8 @@ static void parade_dp_bridge_setup(void) udelay(10); gpio_set_value(dp_rst_l, 1);
+ + gpio_set_pull(dp_hpd, GPIO_PULL_NONE); gpio_cfg_pin(dp_hpd, GPIO_INPUT);
/* De-assert PD (and possibly RST) to power up the bridge. */ @@ -199,9 +263,19 @@ static void parade_dp_bridge_setup(void) exynos_pinmux_i2c7(); i2c_init(7, 100000, 0x00);
- parade_ps8625_bridge_setup(7, 0x48, - parade_writes, + parade_ps8625_bridge_setup(7, 0x48, parade_writes, ARRAY_SIZE(parade_writes)); + /* Spin until the display is ready. + * It's quite important to try really hard to get the display up, + * so be generous. It will typically be ready in only 5 ms. and + * we're out of here. + * If it's not ready after a second, then we're in big trouble. + */ + for(i = 0; i < 1000; i++){ + if (gpio_get_value(dp_hpd)) + break; + mdelay(1); + } }
/* @@ -230,22 +304,17 @@ static void backlight_en(void) gpio_direction_output(bl_en, 1); }
-//static struct video_info smdk5420_dp_config = { -static struct video_info dp_video_info = { - /* FIXME: fix video_info struct to use const for name */ - .name = (char *)"eDP-LVDS NXP PTN3460",
+ +static struct edp_video_info dp_video_info = { + .master_mode = 0, .h_sync_polarity = 0, .v_sync_polarity = 0, .interlaced = 0, - .color_space = COLOR_RGB, .dynamic_range = VESA, .ycbcr_coeff = COLOR_YCBCR601, .color_depth = COLOR_8, - - .link_rate = LINK_RATE_2_70GBPS, - .lane_count = LANE_COUNT2, };
/* FIXME: move some place more appropriate */ @@ -305,14 +374,13 @@ static void backlight_vdd(void) /* this happens after cpu_init where exynos resources are set */ static void mainboard_init(device_t dev) { - struct s5p_dp_device dp_device = { - .base = (struct exynos5_dp *)EXYNOS5420_DP1_BASE, - .video_info = &dp_video_info, - }; + /* we'll stick with the crummy u-boot struct for now.*/ + /* doing this as an auto since the struct has to be writeable */ + struct edp_device_info device_info; + void *fb_addr = (void *)(get_fb_base_kb() * KiB);
gpio_init(); - tmu_init(&exynos5420_tmu_info);
/* Clock Gating all the unused IP's to save power */ @@ -334,17 +402,30 @@ static void mainboard_init(device_t dev)
lcd_vdd();
+ /* Start the fimd running before you do the phy and lcd setup. + * why do fimd before training etc? + * because we need a data stream from + * the fimd or the clock recovery step fails. + */ + vidinfo.screen_base = fb_addr; + exynos_fimd_lcd_init(&vidinfo); + parade_dp_bridge_setup(); - dp_controller_init(&dp_device); + + /* this might get more dynamic in future ... */ + memset(&device_info, 0, sizeof(device_info)); + device_info.disp_info.name = (char *)"Pit display"; + device_info.disp_info.h_total = 1366; + device_info.disp_info.v_total = 768; + device_info.video_info = dp_video_info; + device_info.raw_edid = panel_edid; + exynos_init_dp(&device_info);
udelay(LCD_T3_DELAY_MS * 1000);
backlight_vdd(); backlight_pwm(); backlight_en(); - - // Uncomment to get excessive GPIO output: - // gpio_info(); }
#if !CONFIG_DYNAMIC_CBMEM