150 comments:
File src/soc/amd/stoneyridge/bertdump.c:
Patch Set #1, Line 46: static const char *acpi_severity[] = {
static const char * array should probably be static const char * const
Patch Set #1, Line 65: printk(0, " e * Invalid bits %llx\n", check & ~valid);
line over 80 characters
Patch Set #1, Line 67: printk(0, " e Transaction Type = %llx %s\n", check & X86_PROC_CHK_XACT_MASK >> X86_PROC_CHK_XACT_SH,
line over 80 characters
Patch Set #1, Line 67: printk(0, " e Transaction Type = %llx %s\n", check & X86_PROC_CHK_XACT_MASK >> X86_PROC_CHK_XACT_SH,
Possible precedence defect with mask then right shift - may need parentheses
Patch Set #1, Line 68: check & X86_PROC_CHK_XACT_MASK ? "V" : "");
line over 80 characters
Patch Set #1, Line 70: printk(0, " e Operation = %llx %s\n", check & X86_PROC_CHK_OPER_MASK >> X86_PROC_CHK_OPER_SH,
line over 80 characters
Patch Set #1, Line 70: printk(0, " e Operation = %llx %s\n", check & X86_PROC_CHK_OPER_MASK >> X86_PROC_CHK_OPER_SH,
Possible precedence defect with mask then right shift - may need parentheses
Patch Set #1, Line 71: check & X86_PROC_CHK_OPERATION_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 73: printk(0, " e Cache Level = %llx %s\n", check & X86_PROC_CHK_LEVEL_MASK >> X86_PROC_CHK_LEVEL_SH,
line over 80 characters
Patch Set #1, Line 73: printk(0, " e Cache Level = %llx %s\n", check & X86_PROC_CHK_LEVEL_MASK >> X86_PROC_CHK_LEVEL_SH,
Possible precedence defect with mask then right shift - may need parentheses
Patch Set #1, Line 74: check & X86_PROC_CHK_LEVEL_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 76: printk(0, " e Context Corrupt = %x %s\n", !!(check & X86_PROC_CHK_CTX_CORRUPT),
line over 80 characters
Patch Set #1, Line 77: check & X86_PROC_CHK_CONTEXT_CORPT_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 79: printk(0, " e Uncorrected = %x %s\n", !!(check & X86_PROC_CHK_UNCORRECTED),
line over 80 characters
Patch Set #1, Line 80: check & X86_PROC_CHK_UNCORRECTED_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 82: printk(0, " e Precise IP = %x %s\n", !!(check & X86_PROC_CHK_PRECISE_IP),
line over 80 characters
Patch Set #1, Line 83: check & X86_PROC_CHK_PRECISE_IP_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 85: printk(0, " e Restartable IP = %x %s\n", !!(check & X86_PROC_CHK_RESTARTABLE_IP),
line over 80 characters
Patch Set #1, Line 86: check & X86_PROC_CHK_RESTARTABLE_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 88: printk(0, " e Overflow = %x %s\n", !!(check & X86_PROC_CHK_OVERFLOW),
line over 80 characters
Patch Set #1, Line 89: check & X86_PROC_CHK_OVERFLOW_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 91: printk(0, " e Participation Type = %llx %s\n", check & X86_PROC_CHK_PARTIC_MASK >> X86_PROC_CHK_PARTIC_SH,
line over 80 characters
Patch Set #1, Line 91: printk(0, " e Participation Type = %llx %s\n", check & X86_PROC_CHK_PARTIC_MASK >> X86_PROC_CHK_PARTIC_SH,
Possible precedence defect with mask then right shift - may need parentheses
Patch Set #1, Line 92: check & X86_PROC_CHK_PART_TYPE_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 94: printk(0, " e Time Out = %x %s\n", !!(check & X86_PROC_CHK_OVERFLOW),
line over 80 characters
Patch Set #1, Line 95: check & X86_PROC_CHK_TIMEOUT ? "V" : "");
line over 80 characters
Patch Set #1, Line 97: printk(0, " e Address Space = %llx %s\n", check & X86_PROC_CHK_PARTIC_MASK >> X86_PROC_CHK_PARTIC_SH,
line over 80 characters
Patch Set #1, Line 97: printk(0, " e Address Space = %llx %s\n", check & X86_PROC_CHK_PARTIC_MASK >> X86_PROC_CHK_PARTIC_SH,
Possible precedence defect with mask then right shift - may need parentheses
Patch Set #1, Line 98: check & X86_PROC_CHK_ADDR_SPACE_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 104: printk(0, " e * Invalid bits %llx\n", check & ~valid);
line over 80 characters
Patch Set #1, Line 106: printk(0, " e Transaction Type = %llx %s\n", check & X86_PROC_MS_CHK_XACT_MASK >> X86_PROC_MS_CHK_XACT_SH,
line over 80 characters
Patch Set #1, Line 106: printk(0, " e Transaction Type = %llx %s\n", check & X86_PROC_MS_CHK_XACT_MASK >> X86_PROC_MS_CHK_XACT_SH,
Possible precedence defect with mask then right shift - may need parentheses
Patch Set #1, Line 107: check & X86_PROC_CHK_XACT_MASK ? "V" : "");
line over 80 characters
Patch Set #1, Line 109: printk(0, " e Uncorrected = %x %s\n", !!(check & X86_PROC_MS_CHK_UNCORRECTED),
line over 80 characters
Patch Set #1, Line 110: check & X86_PROC_CHK_UNCORRECTED_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 112: printk(0, " e Precise IP = %x %s\n", !!(check & X86_PROC_MS_CHK_PRECISE_IP),
line over 80 characters
Patch Set #1, Line 113: check & X86_PROC_CHK_PRECISE_IP_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 115: printk(0, " e Restartable IP = %x %s\n", !!(check & X86_PROC_MS_CHK_RESTARTABLE_IP),
line over 80 characters
Patch Set #1, Line 116: check & X86_PROC_CHK_RESTARTABLE_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 118: printk(0, " e Overflow = %x %s\n", !!(check & X86_PROC_MS_CHK_OVERFLOW),
line over 80 characters
Patch Set #1, Line 119: check & X86_PROC_CHK_OVERFLOW_VALID ? "V" : "");
line over 80 characters
Patch Set #1, Line 122: static const char *check_guid_names[] = {
static const char * array should probably be static const char * const
Patch Set #1, Line 147: printk(0, " ___ CPER IA32/x64 Processor Error (Check) Information @0x%p - 0x%p (size 0x%zx) ___\n", err, err + 1, sizeof(*err));
line over 80 characters
Patch Set #1, Line 148: printk(0, " e Structure Type GUID = %s\n", check_guid_name(err->type));
line over 80 characters
Patch Set #1, Line 151: printk(0, " e Validation Bits = %llx\n", err->validation);
line over 80 characters
Patch Set #1, Line 153: x86_chkprint_with_valid(err->check_info, X86_PROC_CHK_XACT_TYPE_VALID | X86_PROC_CHK_OPERATION_VALID
line over 80 characters
Patch Set #1, Line 154: | X86_PROC_CHK_LEVEL_VALID | X86_PROC_CHK_CONTEXT_CORPT_VALID
line over 80 characters
Patch Set #1, Line 155: | X86_PROC_CHK_UNCORRECTED_VALID | X86_PROC_CHK_PRECISE_IP_VALID
line over 80 characters
Patch Set #1, Line 156: | X86_PROC_CHK_RESTARTABLE_VALID | X86_PROC_CHK_OVERFLOW_VALID);
line over 80 characters
Patch Set #1, Line 158: x86_chkprint_with_valid(err->check_info, X86_PROC_CHK_XACT_TYPE_VALID | X86_PROC_CHK_OPERATION_VALID
line over 80 characters
Patch Set #1, Line 159: | X86_PROC_CHK_LEVEL_VALID | X86_PROC_CHK_CONTEXT_CORPT_VALID
line over 80 characters
Patch Set #1, Line 160: | X86_PROC_CHK_UNCORRECTED_VALID | X86_PROC_CHK_PRECISE_IP_VALID
line over 80 characters
Patch Set #1, Line 161: | X86_PROC_CHK_RESTARTABLE_VALID | X86_PROC_CHK_OVERFLOW_VALID);
line over 80 characters
Patch Set #1, Line 163: x86_chkprint_with_valid(err->check_info, X86_PROC_CHK_XACT_TYPE_VALID | X86_PROC_CHK_OPERATION_VALID
line over 80 characters
Patch Set #1, Line 164: | X86_PROC_CHK_LEVEL_VALID | X86_PROC_CHK_CONTEXT_CORPT_VALID
line over 80 characters
Patch Set #1, Line 165: | X86_PROC_CHK_UNCORRECTED_VALID | X86_PROC_CHK_PRECISE_IP_VALID
line over 80 characters
Patch Set #1, Line 166: | X86_PROC_CHK_RESTARTABLE_VALID | X86_PROC_CHK_OVERFLOW_VALID
line over 80 characters
Patch Set #1, Line 167: | X86_PROC_CHK_PART_TYPE_VALID | X86_PROC_CHK_TIMEOUT_VALID
line over 80 characters
Patch Set #1, Line 168: | X86_PROC_CHK_ADDR_SPACE_VALID);
line over 80 characters
Patch Set #1, Line 170: x86_mschkprint_with_valid(err->check_info, X86_PROC_CHK_XACT_TYPE_VALID | X86_PROC_CHK_OPERATION_VALID
line over 80 characters
Patch Set #1, Line 171: | X86_PROC_CHK_LEVEL_VALID | X86_PROC_CHK_CONTEXT_CORPT_VALID
line over 80 characters
Patch Set #1, Line 172: | X86_PROC_CHK_UNCORRECTED_VALID | X86_PROC_CHK_PRECISE_IP_VALID);
line over 80 characters
Patch Set #1, Line 179: static const char *context_names[] = {
static const char * array should probably be static const char * const
Patch Set #1, Line 210: printk(0, " ___ CPER IA32/x64 Processor Context Information @0x%p - 0x%p (size 0x%zx) ___\n", ctx,
line over 80 characters
Patch Set #1, Line 211: (u8 *)ctx + ALIGN_UP(sizeof(*ctx) + ctx->array_size, 16),
line over 80 characters
Patch Set #1, Line 212: ALIGN_UP(sizeof(*ctx) + ctx->array_size, 16));
line over 80 characters
Patch Set #1, Line 213: printk(0, " t Context Type = %x %s\n", ctx->type, context_name(ctx->type));
line over 80 characters
Patch Set #1, Line 214: printk(0, " t Array Size = %x\n", ctx->array_size);
line over 80 characters
Patch Set #1, Line 216: printk(0, " t MM Address = %llx\n", ctx->mmap_addr);
line over 80 characters
Patch Set #1, Line 224: printk(0, " t %08x_%08x\n", (u32)(*(array + i) >> 32), (u32)*(array + i));
line over 80 characters
Patch Set #1, Line 233: int errs = (ia32->validation & I32X64SEC_VALID_ERRNUM_MASK) >> I32X64SEC_VALID_ERRNUM_SH;
line over 80 characters
Patch Set #1, Line 234: int ctxs = (ia32->validation & I32X64SEC_VALID_CTXNUM_MASK) >> I32X64SEC_VALID_CTXNUM_SH;
line over 80 characters
Patch Set #1, Line 236: printk(0, " ___ CPER IA32/x64 Processor Error @0x%p sizeof(proc error section struct) is 0x%zx/%zd) ___\n", ia32, sizeof(*ia32), sizeof(*ia32));
line over 80 characters
Patch Set #1, Line 237: printk(0, " x Validation Bits = %llx\n", ia32->validation);
line over 80 characters
Patch Set #1, Line 240: printk(0, " x Processor APIC ID = %llx %s\n", ia32->apicid, ia32->validation & I32X64SEC_VALID_LAPIC ? "V" : "");
line over 80 characters
Patch Set #1, Line 241: printk(0, " x Processor CPUID = EAX = %x %s\n", (u32)ia32->cpuid[0], ia32->validation & I32X64SEC_VALID_CPUID ? "V" : "");
line over 80 characters
Patch Set #1, Line 242: printk(0, " x EBX = %x\n", (u32)ia32->cpuid[1]);
line over 80 characters
Patch Set #1, Line 243: printk(0, " x ECX = %x\n", (u32)ia32->cpuid[2]);
line over 80 characters
Patch Set #1, Line 244: printk(0, " x EDX = %x\n", (u32)ia32->cpuid[3]);
line over 80 characters
Patch Set #1, Line 248: adder += parse_x86_error_info((cper_ia32x64_proc_error_info_t *)((u8 *)ia32 + adder));
line over 80 characters
Patch Set #1, Line 251: adder += parse_x86_context_info((cper_ia32x64_context_t *)((u8 *)ia32 + adder));
line over 80 characters
Patch Set #1, Line 256: static size_t parse_cper_structure_generic(cper_proc_generic_error_section_t *gen)
line over 80 characters
Patch Set #1, Line 258: printk(0, " ___ CPER Generic Processor Error @0x%p sizeof(generic error struct) is 0x%zx/%zd\n", gen, sizeof(*gen), sizeof(*gen));
line over 80 characters
Patch Set #1, Line 259: printk(0, " c Validation Bits = %llx\n", gen->validation);
line over 80 characters
Patch Set #1, Line 260: printk(0, " c Processor Type = %x %s\n", gen->proc_type, gen->validation & GENPROC_VALID_PROC_TYPE ? "V" : "");
line over 80 characters
Patch Set #1, Line 261: printk(0, " c Processor ISA = %x %s\n", gen->proc_isa, gen->validation & GENPROC_VALID_PROC_ISA ? "V" : "");
line over 80 characters
Patch Set #1, Line 262: printk(0, " c Processor Error Type = %x %s\n", gen->error_type, gen->validation & GENPROC_VALID_PROC_ERR_TYPE ? "V" : "");
line over 80 characters
Patch Set #1, Line 263: printk(0, " c Operation = %x %s\n", gen->operation, gen->validation & GENPROC_VALID_OPERATION ? "V" : "");
line over 80 characters
Patch Set #1, Line 264: printk(0, " c Flags = %x %s\n", gen->flags, gen->validation & GENPROC_VALID_FLAGS ? "V" : "");
line over 80 characters
Patch Set #1, Line 265: printk(0, " c Level = %x %s\n", gen->level, gen->validation & GENPROC_VALID_LEVEL ? "V" : "");
line over 80 characters
Patch Set #1, Line 266: printk(0, " c CPU Version Info = %llx %s\n", gen->cpu_version, gen->validation & GENPROC_VALID_CPU_VERSION ? "V" : "");
line over 80 characters
Patch Set #1, Line 267: printk(0, " c CPU Brand String = %s %s\n", gen->cpu_brand_string, gen->validation & GENPROC_VALID_CPU_BRAND ? "V" : "");
line over 80 characters
Patch Set #1, Line 268: printk(0, " c Processor ID = %llx %s\n", gen->proc_id, gen->validation & GENPROC_VALID_CPU_ID ? "V" : "");
line over 80 characters
Patch Set #1, Line 269: printk(0, " c Target Address = %llx %s\n", gen->target_addr, gen->validation & GENPROC_VALID_TGT_ADDR ? "V" : "");
line over 80 characters
Patch Set #1, Line 270: printk(0, " c Requestor Identifier = %llx %s\n", gen->requestor_id, gen->validation & GENPROC_VALID_REQR_ID ? "V" : "");
line over 80 characters
Patch Set #1, Line 271: printk(0, " c Responder Identifier = %llx %s\n", gen->responder_id, gen->validation & GENPROC_VALID_RSPR_ID ? "V" : "");
line over 80 characters
Patch Set #1, Line 272: printk(0, " c Instruction IP = %llx %s\n", gen->instruction_ip, gen->validation & GENPROC_VALID_INSTR_IP ? "V" : "");
line over 80 characters
Patch Set #1, Line 296: return sizeof(acpi_hest_generic_data_v300_t) + entry->data_length;
line over 80 characters
Patch Set #1, Line 301: static const char *guids382[] = {
static const char * array should probably be static const char * const
Patch Set #1, Line 319: if(!guidcmp(&guid, &CPER_SEC_PROC_GENERIC_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 321: if(!guidcmp(&guid, &CPER_SEC_PROC_IA32X64_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 323: if(!guidcmp(&guid, &CPER_SEC_PROC_ARM_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 325: if(!guidcmp(&guid, &CPER_SEC_PLATFORM_MEM_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 327: if(!guidcmp(&guid, &CPER_SEC_PLATFORM_MEM2_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 329: if(!guidcmp(&guid, &CPER_SEC_PCIE_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 331: if(!guidcmp(&guid, &CPER_SEC_FW_ERR_REC_REF_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 333: if(!guidcmp(&guid, &CPER_SEC_PCI_X_BUS_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 335: if(!guidcmp(&guid, &CPER_SEC_PCI_DEV_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 337: if(!guidcmp(&guid, &CPER_SEC_DMAR_GENERIC_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 339: if(!guidcmp(&guid, &CPER_SEC_DMAR_VT_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 341: if(!guidcmp(&guid, &CPER_SEC_DMAR_IOMMU_GUID))
space required before the open parenthesis '('
Patch Set #1, Line 351: printk(0, " ___ 382 found @0x%p sizeof(%s) = 0x%zx/%zd ___\n", entry, entry->revision == 0x300 ? "v3" : "old-type",
line over 80 characters
Patch Set #1, Line 352: entry->revision == 0x300 ? sizeof(acpi_hest_generic_data_v300_t) : sizeof(acpi_hest_generic_data_t),
line over 80 characters
Patch Set #1, Line 353: entry->revision == 0x300 ? sizeof(acpi_hest_generic_data_v300_t) : sizeof(acpi_hest_generic_data_t));
line over 80 characters
Patch Set #1, Line 354: printk(0, " 3 Section Type GUID = %s\n", guid382_name(entry->section_type));
line over 80 characters
Patch Set #1, Line 357: printk(0, " 3 Severity = %x: %s\n", entry->error_severity, acpi_sev(entry->error_severity));
line over 80 characters
Patch Set #1, Line 358: printk(0, " 3 Revision = %x\n", entry->revision);
line over 80 characters
Patch Set #1, Line 359: printk(0, " 3 Validation = %x\n", entry->validation_bits);
line over 80 characters
Patch Set #1, Line 361: printk(0, " 3 Error Data Length = %x\n", entry->data_length);
line over 80 characters
Patch Set #1, Line 362: printk(0, " 3 FRU ID = <todo> %s\n", entry->validation_bits & ACPI_GENERROR_VALID_FRUID ? "V" : "");
line over 80 characters
Patch Set #1, Line 363: printk(0, " 3 FRU text = <todo> %s\n", entry->validation_bits & ACPI_GENERROR_VALID_FRUID_TEXT ? "V" : "");
line over 80 characters
Patch Set #1, Line 365: /* I can cheat on x300 because I know only diff is timestamp */
line over 80 characters
Patch Set #1, Line 370: entry->timestamp.hour, entry->timestamp.min, entry->timestamp.sec,
line over 80 characters
Patch Set #1, Line 371: entry->validation_bits & ACPI_GENERROR_VALID_TIMESTAMP ? "V" : "");
line over 80 characters
Patch Set #1, Line 375: /* each table-382 entry should contain 0 or 1 cper structure at its end */
line over 80 characters
Patch Set #1, Line 378: parse_cper_structure((void *)(entry + 1), entry->section_type);
line over 80 characters
Patch Set #1, Line 380: parse_cper_structure((void *)((u8 *)entry + sizeof(acpi_hest_generic_data_t)), entry->section_type);
line over 80 characters
Patch Set #1, Line 384: entry = (acpi_hest_generic_data_v300_t *)((u8 *)entry + entry382_size(entry));
line over 80 characters
Patch Set #1, Line 400: static acpi_hest_generic_data_v300_t *ptr382_from_bert_entry(acpi_generic_error_status_t *bert_data)
line over 80 characters
Patch Set #1, Line 403: return (acpi_hest_generic_data_v300_t *)((u8 *)bert_data + sizeof(*bert_data));
line over 80 characters
Patch Set #1, Line 429: printk(0, "***** BERT storage at 0x%p - 0x%p (%zd) *****\n", bert_base, (u8 *)bert_base + size, size);
line over 80 characters
Patch Set #1, Line 431: while(offset < size) {
space required before the open parenthesis '('
Patch Set #1, Line 432: entries = (bert_data->block_status & GENERIC_ERR_STS_ENTRY_COUNT_MASK) >> GENERIC_ERR_STS_ENTRY_COUNT_SHIFT;
line over 80 characters
Patch Set #1, Line 433: printk(0, " ___ BERT entry @0x%p - (sizeof(status)=0x%zx/%zd) ___\n", bert_data, sizeof(*bert_data), sizeof(*bert_data));
line over 80 characters
Patch Set #1, Line 434: printk(0, " b Block Status = %x\n", bert_data->block_status);
line over 80 characters
Patch Set #1, Line 436: bert_data->block_status & BIT(0) ? " uncorrectable" : "",
line over 80 characters
Patch Set #1, Line 437: bert_data->block_status & BIT(1) ? " correctable" : "",
line over 80 characters
Patch Set #1, Line 438: bert_data->block_status & BIT(2) ? " mult-uncorrected" : "",
line over 80 characters
Patch Set #1, Line 439: bert_data->block_status & BIT(3) ? " mult-corrected" : "");
line over 80 characters
Patch Set #1, Line 441: printk(0, " b Raw Data Offset = %x\n", bert_data->raw_data_offset);
line over 80 characters
Patch Set #1, Line 442: printk(0, " b Raw Data Length = %x\n", bert_data->raw_data_length);
line over 80 characters
Patch Set #1, Line 443: printk(0, " b Data Length = %x\n", bert_data->data_length);
line over 80 characters
Patch Set #1, Line 444: printk(0, " b Error Severity = %x: %s\n", bert_data->error_severity, acpi_sev(bert_data->error_severity));
line over 80 characters
Patch Set #1, Line 445: if (bert_data->data_length && bert_data->data_length < sizeof(acpi_hest_generic_data_v300_t))
line over 80 characters
Patch Set #1, Line 447: bert_data->data_length, sizeof(acpi_hest_generic_data_v300_t));
line over 80 characters
Patch Set #1, Line 448: if (bert_data->raw_data_length && bert_data->raw_data_offset < sizeof(*bert_data) + bert_data->data_length)
line over 80 characters
Patch Set #1, Line 450: bert_data->raw_data_offset, sizeof(*bert_data), bert_data->data_length);
line over 80 characters
Patch Set #1, Line 453: /* can have zero or more data entries, of type 382 and/or of raw */
line over 80 characters
Patch Set #1, Line 454: gen382 = ptr382_from_bert_entry(bert_data); // todo: this only handles a single 382 entry
line over 80 characters
Patch Set #1, Line 463: bert_data = (acpi_generic_error_status_t *)((u8 *)bert_data + offset);
line over 80 characters
To view, visit change 28480. To unsubscribe, or for help writing mail filters, visit settings.