Felix Held submitted this change.
6 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
soc/intel/cmn/block/{pcie/rtd3,usb4}: Use helper functions for _DSD
BUG=b:259716145
TEST=Verified SSDT on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib57dea9b16e4590ca2d75ac1512fdaf773ec50f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70065
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/drivers/pcie/rtd3/device/chip.c
M src/soc/intel/common/block/pcie/rtd3/rtd3.c
M src/soc/intel/common/block/usb4/pcie.c
3 files changed, 27 insertions(+), 58 deletions(-)
diff --git a/src/drivers/pcie/rtd3/device/chip.c b/src/drivers/pcie/rtd3/device/chip.c
index 349dffd..88b85f1 100644
--- a/src/drivers/pcie/rtd3/device/chip.c
+++ b/src/drivers/pcie/rtd3/device/chip.c
@@ -12,15 +12,6 @@
#include "chip.h"
/*
- * This UUID and the resulting ACPI Device Property is defined by the
- * Power Management for Storage Hardware Devices:
- *
- * https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
- */
-#define PCIE_RTD3_STORAGE_UUID "5025030F-842F-4AB4-A561-99A5189762D0"
-#define PCIE_RTD3_STORAGE_PROPERTY "StorageD3Enable"
-
-/*
* Writes the ACPI power resources for a PCI device so it can enter D3Cold.
*
* If the device is a storage class, then the StorageD3Enable _DSD will
@@ -81,7 +72,6 @@
*/
static void pcie_rtd3_device_acpi_fill_ssdt(const struct device *dev)
{
- struct acpi_dp *dsd, *pkg;
const struct drivers_pcie_rtd3_device_config *config = config_of(dev);
/* Copy the GPIOs to avoid discards 'const' qualifier error */
struct acpi_gpio reset_gpio = config->reset_gpio;
@@ -114,11 +104,7 @@
/* Storage devices won't enter D3 without this property */
if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE) {
- dsd = acpi_dp_new_table("_DSD");
- pkg = acpi_dp_new_table(PCIE_RTD3_STORAGE_UUID);
- acpi_dp_add_integer(pkg, PCIE_RTD3_STORAGE_PROPERTY, 1);
- acpi_dp_add_package(dsd, pkg);
- acpi_dp_write(dsd);
+ acpi_device_add_storage_d3_enable(NULL);
printk(BIOS_INFO, "%s.%s: Added StorageD3Enable property\n", scope, name);
}
diff --git a/src/soc/intel/common/block/pcie/rtd3/rtd3.c b/src/soc/intel/common/block/pcie/rtd3/rtd3.c
index 2c60eff..f9b587d 100644
--- a/src/soc/intel/common/block/pcie/rtd3/rtd3.c
+++ b/src/soc/intel/common/block/pcie/rtd3/rtd3.c
@@ -13,25 +13,6 @@
#include <soc/iomap.h>
#include "chip.h"
-/*
- * The "ExternalFacingPort" and "HotPlugSupportInD3" properties are defined at
- * https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
- */
-#define PCIE_EXTERNAL_PORT_UUID "EFCC06CC-73AC-4BC3-BFF0-76143807C389"
-#define PCIE_EXTERNAL_PORT_PROPERTY "ExternalFacingPort"
-
-#define PCIE_HOTPLUG_IN_D3_UUID "6211E2C0-58A3-4AF3-90E1-927A4E0C55A4"
-#define PCIE_HOTPLUG_IN_D3_PROPERTY "HotPlugSupportInD3"
-
-/*
- * This UUID and the resulting ACPI Device Property is defined by the
- * Power Management for Storage Hardware Devices:
- *
- * https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
- */
-#define PCIE_RTD3_STORAGE_UUID "5025030F-842F-4AB4-A561-99A5189762D0"
-#define PCIE_RTD3_STORAGE_PROPERTY "StorageD3Enable"
-
/* PCIe Root Port registers for link status and L23 control. */
#define PCH_PCIE_CFG_LSTS 0x52 /* Link Status Register */
#define PCH_PCIE_CFG_SPR 0xe0 /* Scratchpad */
@@ -367,7 +348,7 @@
FIELDLIST_NAMESTR(ACPI_REG_PCI_L23_RDY_DETECT, 1),
};
int pcie_rp;
- struct acpi_dp *dsd, *pkg;
+ struct acpi_dp *dsd;
if (!is_dev_enabled(parent)) {
printk(BIOS_ERR, "%s: root port not enabled\n", __func__);
@@ -474,16 +455,11 @@
/* Indicate to the OS that device supports hotplug in D3. */
dsd = acpi_dp_new_table("_DSD");
- pkg = acpi_dp_new_table(PCIE_HOTPLUG_IN_D3_UUID);
- acpi_dp_add_integer(pkg, PCIE_HOTPLUG_IN_D3_PROPERTY, 1);
- acpi_dp_add_package(dsd, pkg);
+ acpi_device_add_hotplug_support_in_d3(dsd);
/* Indicate to the OS if the device provides an External facing port. */
- if (config->add_acpi_external_facing_port) {
- pkg = acpi_dp_new_table(PCIE_EXTERNAL_PORT_UUID);
- acpi_dp_add_integer(pkg, PCIE_EXTERNAL_PORT_PROPERTY, 1);
- acpi_dp_add_package(dsd, pkg);
- }
+ if (config->add_acpi_external_facing_port)
+ acpi_device_add_external_facing_port(dsd);
/* Indicate to the OS if the device has DMA property. */
if (config->add_acpi_dma_property)
@@ -502,11 +478,7 @@
acpigen_write_STA(ACPI_STATUS_DEVICE_ALL_ON);
acpigen_write_name_integer("_S0W", ACPI_DEVICE_SLEEP_D3_COLD);
- dsd = acpi_dp_new_table("_DSD");
- pkg = acpi_dp_new_table(PCIE_RTD3_STORAGE_UUID);
- acpi_dp_add_integer(pkg, PCIE_RTD3_STORAGE_PROPERTY, 1);
- acpi_dp_add_package(dsd, pkg);
- acpi_dp_write(dsd);
+ acpi_device_add_storage_d3_enable(NULL);
acpigen_pop_len(); /* Device */
diff --git a/src/soc/intel/common/block/usb4/pcie.c b/src/soc/intel/common/block/usb4/pcie.c
index 85292e2..0139647 100644
--- a/src/soc/intel/common/block/usb4/pcie.c
+++ b/src/soc/intel/common/block/usb4/pcie.c
@@ -9,15 +9,12 @@
#include "chip.h"
-#define PCI_HOTPLUG_IN_D3_UUID "6211E2C0-58A3-4AF3-90E1-927A4E0C55A4"
-#define PCI_EXTERNAL_PORT_UUID "EFCC06CC-73AC-4BC3-BFF0-76143807C389"
-
#if CONFIG(HAVE_ACPI_TABLES)
static void usb4_pcie_acpi_fill_ssdt(const struct device *dev)
{
const struct soc_intel_common_block_usb4_config *config;
const struct device *parent;
- struct acpi_dp *dsd, *pkg;
+ struct acpi_dp *dsd;
const char *usb4_path;
int port_id;
@@ -56,15 +53,11 @@
acpi_dp_add_integer(dsd, "usb4-port-number", port_id);
/* Indicate that device supports hotplug in D3. */
- pkg = acpi_dp_new_table(PCI_HOTPLUG_IN_D3_UUID);
- acpi_dp_add_integer(pkg, "HotPlugSupportInD3", 1);
- acpi_dp_add_package(dsd, pkg);
+ acpi_device_add_hotplug_support_in_d3(dsd);
/* Indicate that port is external. */
- pkg = acpi_dp_new_table(PCI_EXTERNAL_PORT_UUID);
- acpi_dp_add_integer(pkg, "ExternalFacingPort", 1);
+ acpi_device_add_external_facing_port(dsd);
- acpi_dp_add_package(dsd, pkg);
acpi_dp_write(dsd);
acpigen_pop_len(); /* Scope */
To view, visit change 70065. To unsubscribe, or for help writing mail filters, visit settings.