Venkateswarlu V Vinjamuri (venkateswarlu.v.vinjamuri@intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15776
-gerrit
commit ddd9a47138e8be925bf39984ed02afb1adaaaa73 Author: Shankar, Vaibhav vaibhav.shankar@intel.com Date: Wed Jul 13 14:00:08 2016 -0700
soc/intel/apollolake: add iosstate macros for GPIO
IO Standby State (IOSSTATE): The I/O Standby State defines which state the pad should be parked in when the I/O is in a standby state. Iosstate set to 15 means IO-Standby is ignored for this pin (same as functional mode), So that pin keeps on functioning in S3/S0iX.
Change-Id: Ie51ff86a2ea63fa6535407fcc2df7a137ee43e8b Signed-off-by: venkateswarlu vinjamuri venkateswarlu.v.vinjamuri@intel.com --- src/soc/intel/apollolake/gpio.c | 12 +++++++++++- src/soc/intel/apollolake/include/soc/gpio.h | 8 ++++++++ src/soc/intel/apollolake/include/soc/gpio_defs.h | 3 +++ 3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/src/soc/intel/apollolake/gpio.c b/src/soc/intel/apollolake/gpio.c index a3ffb3d..662d554 100644 --- a/src/soc/intel/apollolake/gpio.c +++ b/src/soc/intel/apollolake/gpio.c @@ -85,10 +85,20 @@ static void gpio_configure_itss(const struct pad_config *cfg,
void gpio_configure_pad(const struct pad_config *cfg) { + uint32_t dw1; const struct pad_community *comm = gpio_get_community(cfg->pad); uint16_t config_offset = PAD_CFG_OFFSET(cfg->pad - comm->first_pad); + + /* Iostandby bits are tentatively stored in [3:0] bits(RO) of config1. + * dw1 is used to extract the bits of Iostandby. + * This is done to preserve config1 size as unit16 in gpio.h + */ + dw1= cfg->config1; + dw1 |= (cfg->config1 & PAD_CFG1_IOSSTATE_IGNORE_MASK) << PAD_CFG1_IOSSTATE_SET; + dw1 &=~PAD_CFG1_IOSSTATE_IGNORE_MASK; + iosf_write(comm->port, config_offset, cfg->config0); - iosf_write(comm->port, config_offset + sizeof(uint32_t), cfg->config1); + iosf_write(comm->port, config_offset + sizeof(uint32_t), dw1);
gpio_configure_itss(cfg, comm->port, config_offset); } diff --git a/src/soc/intel/apollolake/include/soc/gpio.h b/src/soc/intel/apollolake/include/soc/gpio.h index 1ebac2d..05a2113 100644 --- a/src/soc/intel/apollolake/include/soc/gpio.h +++ b/src/soc/intel/apollolake/include/soc/gpio.h @@ -28,6 +28,7 @@ typedef uint32_t gpio_t; #define PAD_FUNC(value) PAD_CFG0_MODE_##value #define PAD_RESET(value) PAD_CFG0_RESET_##value #define PAD_PULL(value) PAD_CFG1_PULL_##value +#define PAD_IOSSTATE(value) PAD_CFG1_IOSSTATE_##value #define PAD_IRQ_CFG(route, trig, inv) \ (PAD_CFG0_ROUTE_##route | \ PAD_CFG0_TRIG_##trig | \ @@ -40,10 +41,17 @@ typedef uint32_t gpio_t; .config1 = __config1, \ }
+ + /* Native function configuration */ #define PAD_CFG_NF(pad, pull, rst, func) \ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull))
+/* Native function configuration for standby state */ +#define PAD_CFG_NF_IOSTATE(pad, pull, rst, func, iostate) \ + _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), (PAD_PULL(pull) | \ + PAD_IOSSTATE(iostate))) + /* General purpose output, no pullup/down. */ #define PAD_CFG_GPO(pad, val, rst) \ _PAD_CFG_STRUCT(pad, \ diff --git a/src/soc/intel/apollolake/include/soc/gpio_defs.h b/src/soc/intel/apollolake/include/soc/gpio_defs.h index 48e08e7..db105c8 100644 --- a/src/soc/intel/apollolake/include/soc/gpio_defs.h +++ b/src/soc/intel/apollolake/include/soc/gpio_defs.h @@ -76,6 +76,7 @@ #define PAD_CFG0_RESET_RSMRST (3 << 30)
#define PAD_CFG1_IRQ_MASK (0xff << 0) +#define PAD_CFG1_IOSSTATE_IGNORE (0xf << 0) /* Ignore Iostandby */ #define PAD_CFG1_PULL_MASK (0xf << 10) #define PAD_CFG1_PULL_NONE (0x0 << 10) #define PAD_CFG1_PULL_DN_5K (0x2 << 10) @@ -86,6 +87,8 @@ #define PAD_CFG1_PULL_UP_20K (0xc << 10) #define PAD_CFG1_PULL_UP_667 (0xd << 10) #define PAD_CFG1_PULL_NATIVE (0xf << 10) +#define PAD_CFG1_IOSSTATE_SET 14 /* set Ignore Iostandby */ +#define PAD_CFG1_IOSSTATE_IGNORE_MASK 0xf /* Ignore Iostandby mask */
#define PAD_CFG_BASE 0x500 #define PAD_CFG_OFFSET(pad) (PAD_CFG_BASE + ((pad) * 8))