Patrick Georgi submitted this change.

View Change

Approvals:
  build bot (Jenkins): Verified
  Karthik Ramasubramanian: Looks good to me, approved

mb/google/dedede/var/sasuke: Configure GPIO NC pads

Configure GPIO NC pads for sasuke.

BUG=b:172104731
TEST="FW_NAME=sasuke emerge-dedede coreboot"

Change-Id: I3bf8f97708536010da82402ea3d49e387e732d61
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
---
A src/mainboard/google/dedede/variants/sasuke/Makefile.inc
A src/mainboard/google/dedede/variants/sasuke/gpio.c
2 files changed, 70 insertions(+), 0 deletions(-)

diff --git a/src/mainboard/google/dedede/variants/sasuke/Makefile.inc b/src/mainboard/google/dedede/variants/sasuke/Makefile.inc
new file mode 100644
index 0000000..eb2c9bc
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/sasuke/Makefile.inc
@@ -0,0 +1,3 @@
+## SPDX-License-Identifier: GPL-2.0-or-later
+
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/dedede/variants/sasuke/gpio.c b/src/mainboard/google/dedede/variants/sasuke/gpio.c
new file mode 100644
index 0000000..cdce776
--- /dev/null
+++ b/src/mainboard/google/dedede/variants/sasuke/gpio.c
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+
+/* Pad configuration in ramstage*/
+static const struct pad_config gpio_table[] = {
+	/* A11 : TOUCH_RPT_EN ==> NC */
+	PAD_NC(GPP_A11, NONE),
+
+	/* B8  : WLAN_CLKREQ_ODL ==> NC */
+	PAD_NC(GPP_B8, NONE),
+
+	/* C18 : AP_I2C_EMR_SDA ==> NC */
+	PAD_NC(GPP_C18, NONE),
+	/* C19 : AP_I2C_EMR_SCL ==> NC */
+	PAD_NC(GPP_C19, NONE),
+
+	/* D1  : WLAN_PERST_L ==> NC */
+	PAD_NC(GPP_D1, NONE),
+	/* D3  : WLAN_PCIE_WAKE_ODL ==> NC */
+	PAD_NC(GPP_D3, NONE),
+	/* D4  : TOUCH_INT_ODL ==> NC */
+	PAD_NC(GPP_D4, NONE),
+	/* D5  : TOUCH_RESET_L ==> NC */
+	PAD_NC(GPP_D5, NONE),
+	/* D6  : EN_PP3300_TOUCH_S0 ==> NC */
+	PAD_NC(GPP_D6, NONE),
+	/* D12 : WCAM_RST_L ==> NC */
+	PAD_NC(GPP_D12, NONE),
+	/* D14 : EN_PP1200_CAMERA ==> NC */
+	PAD_NC(GPP_D14, NONE),
+	/* D15 : UCAM_RST_L ==> NC */
+	PAD_NC(GPP_D15, NONE),
+	/* D19 : WWAN_WLAN_COEX1 ==> NC */
+	PAD_NC(GPP_D19, NONE),
+	/* D20 : WWAN_WLAN_COEX2 ==> NC */
+	PAD_NC(GPP_D20, NONE),
+	/* D21 : WWAN_WLAN_COEX3 ==> NC */
+	PAD_NC(GPP_D21, NONE),
+
+	/* E2  : CLK_24M_WCAM ==> NC */
+	PAD_NC(GPP_E2, NONE),
+
+	/* G7  : SD_SDIO_WP ==> NC */
+	PAD_NC(GPP_G7, NONE),
+
+	/* H4  : AP_I2C_TS_SDA ==> NC */
+	PAD_NC(GPP_H4, NONE),
+	/* H5  : AP_I2C_TS_SCL ==> NC */
+	PAD_NC(GPP_H5, NONE),
+	/* H6  : AP_I2C_CAM_SDA ==> NC */
+	PAD_NC(GPP_H6, NONE),
+	/* H7  : AP_I2C_CAM_SCL ==> NC */
+	PAD_NC(GPP_H7, NONE),
+
+	/* S2  : DMIC1_CLK ==> NC */
+	PAD_NC(GPP_S2, NONE),
+	/* S3  : DMIC1_DATA ==> NC */
+	PAD_NC(GPP_S3, NONE),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}

To view, visit change 49139. To unsubscribe, or for help writing mail filters, visit settings.