HAOUAS Elyes has uploaded this change for review.
mb/amd/inagua: Drop boards with ROMCC_BOOTBLOCK
ROMCC_BOOTBLOCK is no more. Drop unsupported, unmaintained boards.
Change-Id: I9867138b68ae1bbc728cc29941a963964541985d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
---
D src/mainboard/amd/inagua/BiosCallOuts.c
D src/mainboard/amd/inagua/Kconfig
D src/mainboard/amd/inagua/Kconfig.name
D src/mainboard/amd/inagua/Makefile.inc
D src/mainboard/amd/inagua/OemCustomize.c
D src/mainboard/amd/inagua/OptionsIds.h
D src/mainboard/amd/inagua/acpi/gpe.asl
D src/mainboard/amd/inagua/acpi/ide.asl
D src/mainboard/amd/inagua/acpi/mainboard.asl
D src/mainboard/amd/inagua/acpi/routing.asl
D src/mainboard/amd/inagua/acpi/sata.asl
D src/mainboard/amd/inagua/acpi/sleep.asl
D src/mainboard/amd/inagua/acpi/superio.asl
D src/mainboard/amd/inagua/acpi/usb_oc.asl
D src/mainboard/amd/inagua/acpi_tables.c
D src/mainboard/amd/inagua/board_info.txt
D src/mainboard/amd/inagua/buildOpts.c
D src/mainboard/amd/inagua/cmos.layout
D src/mainboard/amd/inagua/devicetree.cb
D src/mainboard/amd/inagua/dsdt.asl
D src/mainboard/amd/inagua/irq_tables.c
D src/mainboard/amd/inagua/mainboard.c
D src/mainboard/amd/inagua/mptable.c
D src/mainboard/amd/inagua/platform_cfg.h
D src/mainboard/amd/inagua/romstage.c
M src/mainboard/asrock/e350m1/platform_cfg.h
M src/mainboard/gizmosphere/gizmo/BiosCallOuts.c
M src/mainboard/gizmosphere/gizmo/platform_cfg.h
M src/mainboard/pcengines/apu1/platform_cfg.h
29 files changed, 0 insertions(+), 2,808 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/17/38117/1
diff --git a/src/mainboard/amd/inagua/BiosCallOuts.c b/src/mainboard/amd/inagua/BiosCallOuts.c
deleted file mode 100644
index b6267a6..0000000
--- a/src/mainboard/amd/inagua/BiosCallOuts.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <AGESA.h>
-#include <amdlib.h>
-#include <northbridge/amd/agesa/BiosCallOuts.h>
-#include <SB800.h>
-#include <southbridge/amd/cimx/sb800/gpio_oem.h>
-#include <stdlib.h>
-
-static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr);
-static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr);
-
-const BIOS_CALLOUT_STRUCT BiosCallouts[] =
-{
- {AGESA_DO_RESET, agesa_Reset },
- {AGESA_READ_SPD, agesa_ReadSpd },
- {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
- {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
- {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset },
- {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit },
- {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess },
- {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
- {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
-};
-const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
-
-/* Call the host environment interface to provide a user hook opportunity. */
-static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
-{
- AGESA_STATUS Status;
- UINTN FcnData;
- MEM_DATA_STRUCT *MemData;
- UINT32 AcpiMmioAddr;
- UINT32 GpioMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
- UINT8 TempData8;
-
- FcnData = Data;
- MemData = ConfigPtr;
-
- Status = AGESA_SUCCESS;
- /* Get SB MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- switch (MemData->ParameterListPtr->DDR3Voltage) {
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- }
- return Status;
-}
-
-/* PCIE slot reset control */
-static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr)
-{
- AGESA_STATUS Status;
- UINTN FcnData;
- PCIe_SLOT_RESET_INFO *ResetInfo;
-
- UINT32 GpioMmioAddr;
- UINT32 AcpiMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
-
- FcnData = Data;
- ResetInfo = ConfigPtr;
- // Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8 << 8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- Status = AGESA_UNSUPPORTED;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- switch (ResetInfo->ResetId)
- {
- case 4:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 6:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 7:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 |= BIT6;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- }
- return Status;
-}
diff --git a/src/mainboard/amd/inagua/Kconfig b/src/mainboard/amd/inagua/Kconfig
deleted file mode 100644
index a5ba07e..0000000
--- a/src/mainboard/amd/inagua/Kconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2010-2011 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-config BOARD_AMD_INAGUA
- def_bool n
-
-if BOARD_AMD_INAGUA
-
-config BOARD_SPECIFIC_OPTIONS
- def_bool y
- #select ROMCC_BOOTBLOCK
- select CPU_AMD_AGESA_FAMILY14
- select NORTHBRIDGE_AMD_AGESA_FAMILY14
- select SOUTHBRIDGE_AMD_CIMX_SB800
- select SUPERIO_SMSC_KBC1100
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_2048
- select GFXUMA
-
-config MAINBOARD_DIR
- string
- default "amd/inagua"
-
-config MAINBOARD_PART_NUMBER
- string
- default "Inagua"
-
-config HW_MEM_HOLE_SIZEK
- hex
- default 0x200000
-
-config MAX_CPUS
- int
- default 2
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-config ONBOARD_VGA_IS_PRIMARY
- bool
- default y
-
-config VGA_BIOS
- bool
- default n
-
-#config VGA_BIOS_FILE
-# string "VGA BIOS path and filename"
-# depends on VGA_BIOS
-# default "rom/video/OntarioGenericVBios.bin"
-
-config VGA_BIOS_ID
- string "VGA device PCI IDs"
- depends on VGA_BIOS
- default "1002,9802"
-
-config SB800_AHCI_ROM
- bool
- default n
-
-endif # BOARD_AMD_INAGUA
diff --git a/src/mainboard/amd/inagua/Kconfig.name b/src/mainboard/amd/inagua/Kconfig.name
deleted file mode 100644
index 1784fe6..0000000
--- a/src/mainboard/amd/inagua/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-#config BOARD_AMD_INAGUA
-# bool"Inagua"
diff --git a/src/mainboard/amd/inagua/Makefile.inc b/src/mainboard/amd/inagua/Makefile.inc
deleted file mode 100644
index ba56286..0000000
--- a/src/mainboard/amd/inagua/Makefile.inc
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2011 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-ifeq ($(CONFIG_AHCI_BIOS),y)
-stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID))
-cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom
-pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE))
-pci$(stripped_ahcibios_id).rom-type := optionrom
-endif
-
-romstage-y += buildOpts.c
-romstage-y += BiosCallOuts.c
-romstage-y += OemCustomize.c
-
-ramstage-y += buildOpts.c
-ramstage-y += BiosCallOuts.c
-ramstage-y += OemCustomize.c
diff --git a/src/mainboard/amd/inagua/OemCustomize.c b/src/mainboard/amd/inagua/OemCustomize.c
deleted file mode 100644
index fa2d7e4..0000000
--- a/src/mainboard/amd/inagua/OemCustomize.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-
-#include <AGESA.h>
-#include <northbridge/amd/agesa/state_machine.h>
-#include <PlatformMemoryConfiguration.h>
-
-static const PCIe_PORT_DESCRIPTOR PortList[] = {
- // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) MXM
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 5),
- PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 4,
- HotplugDisabled,
- PcieGen2,
- PcieGen2,
- AspmL0sL1, 4)
- },
- // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) PCIE LAN
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 6, 6),
- PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 6,
- HotplugDisabled,
- PcieGen2,
- PcieGen2,
- AspmL0sL1, 6)
- },
- // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) MINIPCIE SLOT1
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 7, 7),
- PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 7,
- HotplugDisabled,
- PcieGen2,
- PcieGen2,
- AspmL0sL1, 7)
- },
- // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
- {
- DESCRIPTOR_TERMINATE_LIST,
- PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 3),
- PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 8,
- HotplugDisabled,
- PcieGen2,
- PcieGen2,
- AspmL0sL1, 0)
- }
-};
-
-static const PCIe_DDI_DESCRIPTOR DdiList[] = {
- // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) DP0 to LVDS
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11),
- PCIE_DDI_DATA_INITIALIZER(ConnectorTypeLvds, Aux1, Hdp1)
- },
- // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) DP1 to VGA
- {
- DESCRIPTOR_TERMINATE_LIST,
- PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15),
- PCIE_DDI_DATA_INITIALIZER(ConnectorTypeAutoDetect, Aux2, Hdp2)
- }
-};
-
-static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
- .Flags = DESCRIPTOR_TERMINATE_LIST,
- .SocketId = 0,
- .PciePortList = PortList,
- .DdiLinkList = DdiList,
-};
-
-void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly)
-{
- InitEarly->GnbConfig.PcieComplexList = &PcieComplex;
- InitEarly->GnbConfig.PsppPolicy = 0;
-}
-
-/*----------------------------------------------------------------------------------------
- * CUSTOMER OVERIDES MEMORY TABLE
- *----------------------------------------------------------------------------------------
- */
-
-/*
- * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
- * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
- * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
- * use its default conservative settings.
- */
-static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = {
- NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 2),
- NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 1),
- PSO_END
-};
-
-void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost)
-{
- InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable;
-}
diff --git a/src/mainboard/amd/inagua/OptionsIds.h b/src/mainboard/amd/inagua/OptionsIds.h
deleted file mode 100644
index 2d8381b..0000000
--- a/src/mainboard/amd/inagua/OptionsIds.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/**
- * @file
- *
- * IDS Option File
- *
- * This file is used to switch on/off IDS features.
- *
- */
-#ifndef _OPTION_IDS_H_
-#define _OPTION_IDS_H_
-
-/**
- *
- * This file generates the defaults tables for the Integrated Debug Support
- * Module. The documented build options are imported from a user controlled
- * file for processing. The build options for the Integrated Debug Support
- * Module are listed below:
- *
- * IDSOPT_IDS_ENABLED
- * IDSOPT_ERROR_TRAP_ENABLED
- * IDSOPT_CONTROL_ENABLED
- * IDSOPT_TRACING_ENABLED
- * IDSOPT_PERF_ANALYSIS
- * IDSOPT_ASSERT_ENABLED
- * IDS_DEBUG_PORT
- * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
- *
- **/
-
-#define IDSOPT_IDS_ENABLED TRUE
-//#define IDSOPT_TRACING_ENABLED TRUE
-#define IDSOPT_ASSERT_ENABLED TRUE
-
-//#define IDSOPT_DEBUG_ENABLED FALSE
-//#undef IDSOPT_HOST_SIMNOW
-//#define IDSOPT_HOST_SIMNOW FALSE
-//#undef IDSOPT_HOST_HDT
-//#define IDSOPT_HOST_HDT FALSE
-//#define IDS_DEBUG_PORT 0x80
-
-#endif
diff --git a/src/mainboard/amd/inagua/acpi/gpe.asl b/src/mainboard/amd/inagua/acpi/gpe.asl
deleted file mode 100644
index 3cf38c0..0000000
--- a/src/mainboard/amd/inagua/acpi/gpe.asl
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Scope(\_GPE) { /* Start Scope GPE */
-
- /* Legacy PM event */
- Method(_L08) {
- /* DBGO("\\_GPE\\_L08\n") */
- }
-
- /* Temp warning (TWarn) event */
- Method(_L09) {
- /* DBGO("\\_GPE\\_L09\n") */
- /* Notify (\_TZ.TZ00, 0x80) */
- }
-
- /* USB controller PME# */
- Method(_L0B) {
- /* DBGO("\\_GPE\\_L0B\n") */
- Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* ExtEvent0 SCI event */
- Method(_L10) {
- /* DBGO("\\_GPE\\_L10\n") */
- }
-
-
- /* ExtEvent1 SCI event */
- Method(_L11) {
- /* DBGO("\\_GPE\\_L11\n") */
- }
-
- /* GPIO0 or GEvent8 event */
- Method(_L18) {
- /* DBGO("\\_GPE\\_L18\n") */
- Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* Azalia SCI event */
- Method(_L1B) {
- /* DBGO("\\_GPE\\_L1B\n") */
- Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-} /* End Scope GPE */
-
-/* Contains the GPEs for USB overcurrent */
-#include "usb_oc.asl"
diff --git a/src/mainboard/amd/inagua/acpi/ide.asl b/src/mainboard/amd/inagua/acpi/ide.asl
deleted file mode 100644
index 59ea078..0000000
--- a/src/mainboard/amd/inagua/acpi/ide.asl
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(IDEC) {
- Name(_ADR, 0x00140001)
- #include "ide.asl"
- }
- }
-}
-*/
-
-/* Some timing tables */
-Name(UDTT, Package(){ /* Udma timing table */
- 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
-})
-
-Name(MDTT, Package(){ /* MWDma timing table */
- 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(POTT, Package(){ /* Pio timing table */
- 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
-})
-
-/* Some timing register value tables */
-Name(MDRT, Package(){ /* MWDma timing register table */
- 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(PORT, Package(){
- 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
-})
-
-OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
- Field(ICRG, AnyAcc, NoLock, Preserve)
-{
- PPTS, 8, /* Primary PIO Slave Timing */
- PPTM, 8, /* Primary PIO Master Timing */
- OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
- PMTM, 8, /* Primary MWDMA Master Timing */
- OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
- OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
- PPSM, 4, /* Primary PIO slave Mode */
- OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
- OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
- PDSM, 4, /* Primary UltraDMA Mode */
-}
-
-Method(GTTM, 1) /* get total time*/
-{
- Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
- Increment(Local0)
- Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
- Increment(Local1)
- Return(Multiply(30, Add(Local0, Local1)))
-}
-
-Device(PRID)
-{
- Name (_ADR, Zero)
- Method(_GTM, 0, Serialized)
- {
- NAME(OTBF, Buffer(20) { /* out buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
- CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
-
- /* Just return if the channel is disabled */
- If(And(PPCR, 0x01)) { /* primary PIO control */
- Return(OTBF)
- }
-
- /* Always tell them independent timing available and IOChannelReady used on both drives */
- Or(BFFG, 0x1A, BFFG)
-
- Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
- Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
-
- If(And(PDCR, 0x01)) { /* It's under UDMA mode */
- Or(BFFG, 0x01, BFFG)
- Store(DerefOf(Index(UDTT, PDMM)), DSD0)
- }
- Else {
- Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
- }
-
- If(And(PDCR, 0x02)) { /* It's under UDMA mode */
- Or(BFFG, 0x04, BFFG)
- Store(DerefOf(Index(UDTT, PDSM)), DSD1)
- }
- Else {
- Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
- }
-
- Return(OTBF) /* out buffer */
- } /* End Method(_GTM) */
-
- Method(_STM, 3, Serialized)
- {
- NAME(INBF, Buffer(20) { /* in buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
- CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(INBF, 16, BFFG) /*buffer flag */
-
- Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
- Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
- Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
- Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
-
- Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
- Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
-
- If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDMM,)
- Or(PDCR, 0x01, PDCR)
- }
- Else {
- If(LNotEqual(DSD0, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTM)
- }
- }
-
- If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDSM,)
- Or(PDCR, 0x02, PDCR)
- }
- Else {
- If(LNotEqual(DSD1, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTS)
- }
- }
- /* Return(INBF) */
- } /*End Method(_STM) */
- Device(MST)
- {
- Name(_ADR, 0)
- Method(_GTF, 0, Serialized) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xA0, CMDA)
- Store(0xA0, CMDB)
- Store(0xA0, CMDC)
-
- Or(PPMM, 0x08, POMD)
-
- If(And(PDCR, 0x01)) {
- Or(PDMM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTM),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(MST) */
-
- Device(SLAV)
- {
- Name(_ADR, 1)
- Method(_GTF, 0, Serialized) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xB0, CMDA)
- Store(0xB0, CMDB)
- Store(0xB0, CMDC)
-
- Or(PPSM, 0x08, POMD)
-
- If(And(PDCR, 0x02)) {
- Or(PDSM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTS),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(SLAV) */
-}
diff --git a/src/mainboard/amd/inagua/acpi/mainboard.asl b/src/mainboard/amd/inagua/acpi/mainboard.asl
deleted file mode 100644
index 702cb92..0000000
--- a/src/mainboard/amd/inagua/acpi/mainboard.asl
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Data to be patched by the BIOS during POST */
-/* FIXME the patching is not done yet! */
-/* Memory related values */
-Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
-Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
-Name(PBLN, 0x0) /* Length of BIOS area */
-
-Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
-Name(HPBA, 0xFED00000) /* Base address of HPET table */
-
-/* Some global data */
-Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
-Name(OSV, Ones) /* Assume nothing */
-Name(PMOD, One) /* Assume APIC */
-
-Scope(\_SB) {
- Method(OSFL, 0){
-
- if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */
-
- if(CondRefOf(\_OSI))
- {
- Store(1, OSVR) /* Assume some form of XP */
- if (\_OSI("Windows 2006")) /* Vista */
- {
- Store(2, OSVR)
- }
- } else {
- If(WCMP(\_OS,"Linux")) {
- Store(3, OSVR) /* Linux */
- } Else {
- Store(4, OSVR) /* Gotta be WinCE */
- }
- }
- Return(OSVR)
- }
-}
-
-Scope(\_SI) {
- Method(_SST, 1) {
- /* DBGO("\\_SI\\_SST\n") */
- /* DBGO(" New Indicator state: ") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
- }
-} /* End Scope SI */
diff --git a/src/mainboard/amd/inagua/acpi/routing.asl b/src/mainboard/amd/inagua/acpi/routing.asl
deleted file mode 100644
index 537bcac..0000000
--- a/src/mainboard/amd/inagua/acpi/routing.asl
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
-#include <arch/acpi.h>
-DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001
- )
- {
- #include "routing.asl"
- }
-*/
-
-/* Routing is in System Bus scope */
-Scope(\_SB) {
- Name(PR0, Package(){
- /* NB devices */
- /* Bus 0, Dev 0 - RS780 Host Controller */
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- Package(){0x0001FFFF, 0, INTC, 0 },
- Package(){0x0001FFFF, 1, INTD, 0 },
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, INTC, 0 },
- Package(){0x0002FFFF, 1, INTD, 0 },
- Package(){0x0002FFFF, 2, INTA, 0 },
- Package(){0x0002FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- Package(){0x0003FFFF, 0, INTD, 0 },
- Package(){0x0003FFFF, 1, INTA, 0 },
- Package(){0x0003FFFF, 2, INTB, 0 },
- Package(){0x0003FFFF, 3, INTC, 0 },
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, INTA, 0 },
- Package(){0x0004FFFF, 1, INTB, 0 },
- Package(){0x0004FFFF, 2, INTC, 0 },
- Package(){0x0004FFFF, 3, INTD, 0 },
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- Package(){0x0005FFFF, 0, INTB, 0 },
- Package(){0x0005FFFF, 1, INTC, 0 },
- Package(){0x0005FFFF, 2, INTD, 0 },
- Package(){0x0005FFFF, 3, INTA, 0 },
- /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
- Package(){0x0006FFFF, 0, INTC, 0 },
- Package(){0x0006FFFF, 1, INTD, 0 },
- Package(){0x0006FFFF, 2, INTA, 0 },
- Package(){0x0006FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
- Package(){0x0007FFFF, 0, INTD, 0 },
- Package(){0x0007FFFF, 1, INTA, 0 },
- Package(){0x0007FFFF, 2, INTB, 0 },
- Package(){0x0007FFFF, 3, INTC, 0 },
-
- Package(){0x0009FFFF, 0, INTB, 0 },
- Package(){0x0009FFFF, 1, INTC, 0 },
- Package(){0x0009FFFF, 2, INTD, 0 },
- Package(){0x0009FFFF, 3, INTA, 0 },
-
- Package(){0x000AFFFF, 0, INTC, 0 },
- Package(){0x000AFFFF, 1, INTD, 0 },
- Package(){0x000AFFFF, 2, INTA, 0 },
- Package(){0x000AFFFF, 3, INTB, 0 },
-
- Package(){0x000BFFFF, 0, INTD, 0 },
- Package(){0x000BFFFF, 1, INTA, 0 },
- Package(){0x000BFFFF, 2, INTB, 0 },
- Package(){0x000BFFFF, 3, INTC, 0 },
-
- Package(){0x000CFFFF, 0, INTA, 0 },
- Package(){0x000CFFFF, 1, INTB, 0 },
- Package(){0x000CFFFF, 2, INTC, 0 },
- Package(){0x000CFFFF, 3, INTD, 0 },
-
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
- /* SB devices */
- /* Bus 0, Dev 17 - SATA controller #2 */
- /* Bus 0, Dev 18 - SATA controller #1 */
- Package(){0x0011FFFF, 0, INTD, 0 },
-
- /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
- * EHCI, dev 18, 19 func 2 */
- Package(){0x0012FFFF, 0, INTC, 0 },
- Package(){0x0012FFFF, 1, INTB, 0 },
-
- Package(){0x0013FFFF, 0, INTC, 0 },
- Package(){0x0013FFFF, 1, INTB, 0 },
-
- Package(){0x0016FFFF, 0, INTC, 0 },
- Package(){0x0016FFFF, 1, INTB, 0 },
-
- /* Package(){0x0014FFFF, 1, INTA, 0 }, */
-
- /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
- Package(){0x0014FFFF, 0, INTA, 0 },
- Package(){0x0014FFFF, 1, INTB, 0 },
- Package(){0x0014FFFF, 2, INTC, 0 },
- Package(){0x0014FFFF, 3, INTD, 0 },
-
- Package(){0x0015FFFF, 0, INTA, 0 },
- Package(){0x0015FFFF, 1, INTB, 0 },
- Package(){0x0015FFFF, 2, INTC, 0 },
- Package(){0x0015FFFF, 3, INTD, 0 },
- })
-
- Name(APR0, Package(){
- /* NB devices in APIC mode */
- /* Bus 0, Dev 0 - RS780 Host Controller */
-
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- Package(){0x0001FFFF, 0, 0, 18 },
- Package(){0x0001FFFF, 1, 0, 19 },
-
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, 0, 18 },
- /* Package(){0x0002FFFF, 1, 0, 19 }, */
- /* Package(){0x0002FFFF, 2, 0, 16 }, */
- /* Package(){0x0002FFFF, 3, 0, 17 }, */
-
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- Package(){0x0003FFFF, 0, 0, 19 },
- Package(){0x0003FFFF, 1, 0, 16 },
- Package(){0x0003FFFF, 2, 0, 17 },
- Package(){0x0003FFFF, 3, 0, 18 },
-
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, 0, 16 },
- Package(){0x0004FFFF, 1, 0, 17 },
- Package(){0x0004FFFF, 2, 0, 18 },
- Package(){0x0004FFFF, 3, 0, 19 },
-
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- Package(){0x0005FFFF, 0, 0, 17 },
- Package(){0x0005FFFF, 1, 0, 18 },
- Package(){0x0005FFFF, 2, 0, 19 },
- Package(){0x0005FFFF, 3, 0, 16 },
-
- /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
- Package(){0x0006FFFF, 0, 0, 18 },
- Package(){0x0006FFFF, 1, 0, 19 },
- Package(){0x0006FFFF, 2, 0, 16 },
- Package(){0x0006FFFF, 3, 0, 17 },
-
- /* Bus 0, Dev 7 - PCIe Bridge for network card */
- Package(){0x0007FFFF, 0, 0, 19 },
- Package(){0x0007FFFF, 1, 0, 16 },
- Package(){0x0007FFFF, 2, 0, 17 },
- Package(){0x0007FFFF, 3, 0, 18 },
-
- /* Bus 0, Dev 9 - PCIe Bridge for network card */
- Package(){0x0009FFFF, 0, 0, 17 },
- Package(){0x0009FFFF, 1, 0, 16 },
- Package(){0x0009FFFF, 2, 0, 17 },
- Package(){0x0009FFFF, 3, 0, 18 },
- /* Bus 0, Dev A - PCIe Bridge for network card */
- Package(){0x000AFFFF, 0, 0, 18 },
- Package(){0x000AFFFF, 1, 0, 16 },
- Package(){0x000AFFFF, 2, 0, 17 },
- Package(){0x000AFFFF, 3, 0, 18 },
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
- /* SB devices in APIC mode */
- /* Bus 0, Dev 17 - SATA controller #2 */
- /* Bus 0, Dev 18 - SATA controller #1 */
- Package(){0x0011FFFF, 0, 0, 19 },
-
- /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
- * EHCI, dev 18, 19 func 2 */
- Package(){0x0012FFFF, 0, 0, 18 },
- Package(){0x0012FFFF, 1, 0, 17 },
- /* Package(){0x0012FFFF, 2, 0, 18 }, */
-
- Package(){0x0013FFFF, 0, 0, 18 },
- Package(){0x0013FFFF, 1, 0, 17 },
- /* Package(){0x0013FFFF, 2, 0, 16 }, */
-
- /* Package(){0x00140000, 0, 0, 16 }, */
-
- Package(){0x0016FFFF, 0, 0, 18 },
- Package(){0x0016FFFF, 1, 0, 17 },
-
- /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
- Package(){0x0014FFFF, 0, 0, 16 },
- Package(){0x0014FFFF, 1, 0, 17 },
- Package(){0x0014FFFF, 2, 0, 18 },
- Package(){0x0014FFFF, 3, 0, 19 },
- /* Package(){0x00140004, 2, 0, 18 }, */
- /* Package(){0x00140004, 3, 0, 19 }, */
- /* Package(){0x00140005, 1, 0, 17 }, */
- /* Package(){0x00140006, 1, 0, 17 }, */
-
- /* TODO: pcie */
- Package(){0x0015FFFF, 0, 0, 16 },
- Package(){0x0015FFFF, 1, 0, 17 },
- Package(){0x0015FFFF, 2, 0, 18 },
- Package(){0x0015FFFF, 3, 0, 19 },
- })
-
- Name(PR1, Package(){
- /* Internal graphics - RS780 VGA, Bus1, Dev5 */
- Package(){0x0005FFFF, 0, INTA, 0 },
- Package(){0x0005FFFF, 1, INTB, 0 },
- Package(){0x0005FFFF, 2, INTC, 0 },
- Package(){0x0005FFFF, 3, INTD, 0 },
- })
- Name(APR1, Package(){
- /* Internal graphics - RS780 VGA, Bus1, Dev5 */
- Package(){0x0005FFFF, 0, 0, 18 },
- Package(){0x0005FFFF, 1, 0, 19 },
- /* Package(){0x0005FFFF, 2, 0, 20 }, */
- /* Package(){0x0005FFFF, 3, 0, 17 }, */
- })
-
- Name(PS2, Package(){
- /* The external GFX - Hooked to PCIe slot 2 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APS2, Package(){
- /* The external GFX - Hooked to PCIe slot 2 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PS4, Package(){
- /* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
- })
- Name(APS4, Package(){
- /* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, 0, 16 },
- Package(){0x0000FFFF, 1, 0, 17 },
- Package(){0x0000FFFF, 2, 0, 18 },
- Package(){0x0000FFFF, 3, 0, 19 },
- })
-
- Name(PS5, Package(){
- /* PCIe slot - Hooked to PCIe slot 5 */
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
- })
- Name(APS5, Package(){
- /* PCIe slot - Hooked to PCIe slot 5 */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PS6, Package(){
- /* PCIe slot - Hooked to PCIe slot 6 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APS6, Package(){
- /* PCIe slot - Hooked to PCIe slot 6 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
- Package(){0x0000FFFF, 0, 0, 19 },
- Package(){0x0000FFFF, 1, 0, 16 },
- Package(){0x0000FFFF, 2, 0, 17 },
- Package(){0x0000FFFF, 3, 0, 18 },
- })
-
- Name(PS9, Package(){
- /* PCIe slot - Hooked to PCIe slot 9 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APS9, Package(){
- /* PCIe slot - Hooked to PCIe slot 9 */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PSa, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APSa, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PE0, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
- })
- Name(APE0, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 16 },
- Package(){0x0000FFFF, 1, 0, 17 },
- Package(){0x0000FFFF, 2, 0, 18 },
- Package(){0x0000FFFF, 3, 0, 19 },
- })
-
- Name(PE1, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
- })
- Name(APE1, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PE2, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APE2, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PE3, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APE3, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 19 },
- Package(){0x0000FFFF, 1, 0, 16 },
- Package(){0x0000FFFF, 2, 0, 17 },
- Package(){0x0000FFFF, 3, 0, 18 },
- })
-
- Name(PCIB, Package(){
- /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
- Package(){0x0005FFFF, 0, 0, 0x14 },
- Package(){0x0005FFFF, 1, 0, 0x15 },
- Package(){0x0005FFFF, 2, 0, 0x16 },
- Package(){0x0005FFFF, 3, 0, 0x17 },
- Package(){0x0006FFFF, 0, 0, 0x15 },
- Package(){0x0006FFFF, 1, 0, 0x16 },
- Package(){0x0006FFFF, 2, 0, 0x17 },
- Package(){0x0006FFFF, 3, 0, 0x14 },
- Package(){0x0007FFFF, 0, 0, 0x16 },
- Package(){0x0007FFFF, 1, 0, 0x17 },
- Package(){0x0007FFFF, 2, 0, 0x14 },
- Package(){0x0007FFFF, 3, 0, 0x15 },
- })
-}
diff --git a/src/mainboard/amd/inagua/acpi/sata.asl b/src/mainboard/amd/inagua/acpi/sata.asl
deleted file mode 100644
index 9e0e535..0000000
--- a/src/mainboard/amd/inagua/acpi/sata.asl
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* simple name description */
-
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(SATA) {
- Name(_ADR, 0x00110000)
- #include "sata.asl"
- }
- }
-}
-*/
-
-Name(STTM, Buffer(20) {
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x1f, 0x00, 0x00, 0x00
-})
-
-/* Start by clearing the PhyRdyChg bits */
-Method(_INI) {
- \_GPE._L1F()
-}
-
-Device(PMRY)
-{
- Name(_ADR, 0)
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(PMST) {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P0IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- }/* end of PMST */
-
- Device(PSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P1IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of PSLA */
-} /* end of PMRY */
-
-
-Device(SEDY)
-{
- Name(_ADR, 1) /* IDE Scondary Channel */
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(SMST)
- {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P2IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SMST */
-
- Device(SSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P3IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SSLA */
-} /* end of SEDY */
-
-/* SATA Hot Plug Support */
-Scope(\_GPE) {
- Method(_L1F,0x0,NotSerialized) {
- if (\_SB.P0PR) {
- if (LGreater(\_SB.P0IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P0PR)
- }
-
- if (\_SB.P1PR) {
- if (LGreater(\_SB.P1IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P1PR)
- }
-
- if (\_SB.P2PR) {
- if (LGreater(\_SB.P2IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P2PR)
- }
-
- if (\_SB.P3PR) {
- if (LGreater(\_SB.P3IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P3PR)
- }
- }
-}
diff --git a/src/mainboard/amd/inagua/acpi/sleep.asl b/src/mainboard/amd/inagua/acpi/sleep.asl
deleted file mode 100644
index 47de049..0000000
--- a/src/mainboard/amd/inagua/acpi/sleep.asl
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Wake status package */
-Name(WKST,Package(){Zero, Zero})
-
-/*
-* \_PTS - Prepare to Sleep method
-*
-* Entry:
-* Arg0=The value of the sleeping state S1=1, S2=2, etc
-*
-* Exit:
-* -none-
-*
-* The _PTS control method is executed at the beginning of the sleep process
-* for S1-S5. The sleeping value is passed to the _PTS control method. This
-* control method may be executed a relatively long time before entering the
-* sleep state and the OS may abort the operation without notification to
-* the ACPI driver. This method cannot modify the configuration or power
-* state of any device in the system.
-*/
-Method(\_PTS, 1) {
- /* DBGO("\\_PTS\n") */
- /* DBGO("From S0 to S") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
-
- /* Don't allow PCIRST# to reset USB */
- if (LEqual(Arg0,3)){
- Store(0,URRE)
- }
-
- /* Clear sleep SMI status flag and enable sleep SMI trap. */
- /*Store(One, CSSM)
- Store(One, SSEN)*/
-
- /* On older chips, clear PciExpWakeDisEn */
- /*if (LLessEqual(\_SB.SBRI, 0x13)) {
- * Store(0,\_SB.PWDE)
- *}
- */
-
- /* Clear wake status structure. */
- Store(0, Index(WKST,0))
- Store(0, Index(WKST,1))
-} /* End Method(\_PTS) */
-
-/*
-* \_BFS OEM Back From Sleep method
-*
-* Entry:
-* Arg0=The value of the sleeping state S1=1, S2=2
-*
-* Exit:
-* -none-
-*/
-Method(\_BFS, 1) {
- /* DBGO("\\_BFS\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
-}
-
-/*
-* \_WAK System Wake method
-*
-* Entry:
-* Arg0=The value of the sleeping state S1=1, S2=2
-*
-* Exit:
-* Return package of 2 DWords
-* Dword 1 - Status
-* 0x00000000 wake succeeded
-* 0x00000001 Wake was signaled but failed due to lack of power
-* 0x00000002 Wake was signaled but failed due to thermal condition
-* Dword 2 - Power Supply state
-* if non-zero the effective S-state the power supply entered
-*/
-Method(\_WAK, 1) {
- /* DBGO("\\_WAK\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
-
- /* Re-enable HPET */
- Store(1,HPDE)
-
- /* Restore PCIRST# so it resets USB */
- if (LEqual(Arg0,3)){
- Store(1,URRE)
- }
-
- /* Arbitrarily clear PciExpWakeStatus */
- Store(PWST, Local1)
- Store(Local1, PWST)
-
- /* if (DeRefOf(Index(WKST,0))) {
- * Store(0, Index(WKST,1))
- * } else {
- * Store(Arg0, Index(WKST,1))
- * }
- */
- Return(WKST)
-} /* End Method(\_WAK) */
diff --git a/src/mainboard/amd/inagua/acpi/superio.asl b/src/mainboard/amd/inagua/acpi/superio.asl
deleted file mode 100644
index e69de29..0000000
--- a/src/mainboard/amd/inagua/acpi/superio.asl
+++ /dev/null
diff --git a/src/mainboard/amd/inagua/acpi/usb_oc.asl b/src/mainboard/amd/inagua/acpi/usb_oc.asl
deleted file mode 100644
index a209909..0000000
--- a/src/mainboard/amd/inagua/acpi/usb_oc.asl
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* simple name description */
-/*
-#include <arch/acpi.h>
-DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001
- )
- {
- #include "usb.asl"
- }
-*/
-
-/* USB overcurrent mapping pins. */
-Name(UOM0, 0)
-Name(UOM1, 2)
-Name(UOM2, 0)
-Name(UOM3, 7)
-Name(UOM4, 2)
-Name(UOM5, 2)
-Name(UOM6, 6)
-Name(UOM7, 2)
-Name(UOM8, 6)
-Name(UOM9, 6)
-
-Method(UCOC, 0) {
- Sleep(20)
- Store(0x13,CMTI)
- Store(0,GPSL)
-}
-
-/* USB Port 0 overcurrent uses Gpm 0 */
-If(LLessEqual(UOM0,9)) {
- Scope (\_GPE) {
- Method (_L13) {
- UCOC()
- if(LEqual(GPB0,PLC0)) {
- Not(PLC0,PLC0)
- Store(PLC0, \_SB.PT0D)
- }
- }
- }
-}
-
-/* USB Port 1 overcurrent uses Gpm 1 */
-If (LLessEqual(UOM1,9)) {
- Scope (\_GPE) {
- Method (_L14) {
- UCOC()
- if (LEqual(GPB1,PLC1)) {
- Not(PLC1,PLC1)
- Store(PLC1, \_SB.PT1D)
- }
- }
- }
-}
-
-/* USB Port 2 overcurrent uses Gpm 2 */
-If (LLessEqual(UOM2,9)) {
- Scope (\_GPE) {
- Method (_L15) {
- UCOC()
- if (LEqual(GPB2,PLC2)) {
- Not(PLC2,PLC2)
- Store(PLC2, \_SB.PT2D)
- }
- }
- }
-}
-
-/* USB Port 3 overcurrent uses Gpm 3 */
-If (LLessEqual(UOM3,9)) {
- Scope (\_GPE) {
- Method (_L16) {
- UCOC()
- if (LEqual(GPB3,PLC3)) {
- Not(PLC3,PLC3)
- Store(PLC3, \_SB.PT3D)
- }
- }
- }
-}
-
-/* USB Port 4 overcurrent uses Gpm 4 */
-If (LLessEqual(UOM4,9)) {
- Scope (\_GPE) {
- Method (_L19) {
- UCOC()
- if (LEqual(GPB4,PLC4)) {
- Not(PLC4,PLC4)
- Store(PLC4, \_SB.PT4D)
- }
- }
- }
-}
-
-/* USB Port 5 overcurrent uses Gpm 5 */
-If (LLessEqual(UOM5,9)) {
- Scope (\_GPE) {
- Method (_L1A) {
- UCOC()
- if (LEqual(GPB5,PLC5)) {
- Not(PLC5,PLC5)
- Store(PLC5, \_SB.PT5D)
- }
- }
- }
-}
-
-/* USB Port 6 overcurrent uses Gpm 6 */
-If (LLessEqual(UOM6,9)) {
- Scope (\_GPE) {
- /* Method (_L1C) { */
- Method (_L06) {
- UCOC()
- if (LEqual(GPB6,PLC6)) {
- Not(PLC6,PLC6)
- Store(PLC6, \_SB.PT6D)
- }
- }
- }
-}
-
-/* USB Port 7 overcurrent uses Gpm 7 */
-If (LLessEqual(UOM7,9)) {
- Scope (\_GPE) {
- /* Method (_L1D) { */
- Method (_L07) {
- UCOC()
- if (LEqual(GPB7,PLC7)) {
- Not(PLC7,PLC7)
- Store(PLC7, \_SB.PT7D)
- }
- }
- }
-}
-
-/* USB Port 8 overcurrent uses Gpm 8 */
-If (LLessEqual(UOM8,9)) {
- Scope (\_GPE) {
- Method (_L17) {
- if (LEqual(G8IS,PLC8)) {
- Not(PLC8,PLC8)
- Store(PLC8, \_SB.PT8D)
- }
- }
- }
-}
-
-/* USB Port 9 overcurrent uses Gpm 9 */
-If (LLessEqual(UOM9,9)) {
- Scope (\_GPE) {
- Method (_L0E) {
- if (LEqual(G9IS,0)) {
- Store(1,\_SB.PT9D)
- }
- }
- }
-}
diff --git a/src/mainboard/amd/inagua/acpi_tables.c b/src/mainboard/amd/inagua/acpi_tables.c
deleted file mode 100644
index 97ea649..0000000
--- a/src/mainboard/amd/inagua/acpi_tables.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/acpi.h>
-#include <arch/ioapic.h>
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
- /* create all subtables for processors */
- current = acpi_create_madt_lapics(current);
-
- /* Write SB800 IOAPIC, only one */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
- CONFIG_MAX_CPUS, IO_APIC_ADDR, 0);
-
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 0);
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9, 0xF);
-
- /* 0: mean bus 0--->ISA */
- /* 0: PIC 0 */
- /* 2: APIC 2 */
- /* 5 mean: 0101 --> Edge-triggered, Active high */
-
- /* create all subtables for processors */
- /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
- /* 1: LINT1 connect to NMI */
-
- return current;
-}
diff --git a/src/mainboard/amd/inagua/board_info.txt b/src/mainboard/amd/inagua/board_info.txt
deleted file mode 100644
index b351b8e..0000000
--- a/src/mainboard/amd/inagua/board_info.txt
+++ /dev/null
@@ -1 +0,0 @@
-Category: eval
diff --git a/src/mainboard/amd/inagua/buildOpts.c b/src/mainboard/amd/inagua/buildOpts.c
deleted file mode 100644
index fe6fac0..0000000
--- a/src/mainboard/amd/inagua/buildOpts.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/**
- * @file
- *
- * AMD User options selection for a Brazos platform solution system
- *
- * This file is placed in the user's platform directory and contains the
- * build option selections desired for that platform.
- *
- * For Information about this file, see @ref platforminstall.
- *
- */
-
-#include <stdlib.h>
-
-
-/* Select the CPU family. */
-#define INSTALL_FAMILY_10_SUPPORT FALSE
-#define INSTALL_FAMILY_12_SUPPORT FALSE
-#define INSTALL_FAMILY_14_SUPPORT TRUE
-#define INSTALL_FAMILY_15_SUPPORT FALSE
-
-/* Select the CPU socket type. */
-#define INSTALL_G34_SOCKET_SUPPORT FALSE
-#define INSTALL_C32_SOCKET_SUPPORT FALSE
-#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
-#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
-#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
-#define INSTALL_FS1_SOCKET_SUPPORT FALSE
-#define INSTALL_FM1_SOCKET_SUPPORT FALSE
-#define INSTALL_FP1_SOCKET_SUPPORT FALSE
-#define INSTALL_FT1_SOCKET_SUPPORT TRUE
-#define INSTALL_AM3_SOCKET_SUPPORT FALSE
-
-/*
- * Agesa optional capabilities selection.
- * Uncomment and mark FALSE those features you wish to include in the build.
- * Comment out or mark TRUE those features you want to REMOVE from the build.
- */
-
-#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE
-#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE
-#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE
-#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE
-
-#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE
-#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE
-
-#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE
-#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
-#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE
-#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
-//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
-#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE
-#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
-#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE
-#define BLDOPT_REMOVE_DQS_TRAINING FALSE
-#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
-#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
-#define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE
-#define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE
-#define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE
-#define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE
-#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE
-#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE
-#define BLDOPT_REMOVE_SRAT FALSE
-#define BLDOPT_REMOVE_SLIT FALSE
-#define BLDOPT_REMOVE_WHEA FALSE
-#define BLDOPT_REMOVE_DMI TRUE
-#define BLDOPT_REMOVE_HT_ASSIST TRUE
-#define BLDOPT_REMOVE_ATM_MODE TRUE
-//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE
-//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE
-#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE
-//#define BLDOPT_REMOVE_C6_STATE TRUE
-#define BLDOPT_REMOVE_GFX_RECOVERY TRUE
-#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE
-
-
-#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
-#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
-
-#define BLDCFG_VRM_CURRENT_LIMIT 24000
-//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0
-#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000
-#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1
-#define BLDCFG_VRM_SLEW_RATE 5000
-//#define BLDCFG_VRM_NB_SLEW_RATE 5000
-//#define BLDCFG_VRM_ADDITIONAL_DELAY 0
-//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0
-#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
-//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE
-#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000
-//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0
-
-//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C'
-//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
-//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE
-#define BLDCFG_PLAT_NUM_IO_APICS 3
-//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled
-//#define BLDCFG_PLATFORM_C1E_OPDATA 0
-//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0
-//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0
-#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
-#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840
-#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840
-//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto
-#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
-#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList
-#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
-//#define BLDCFG_STARTING_BUSNUM 0
-//#define BLDCFG_MAXIMUM_BUSNUM 0xf8
-//#define BLDCFG_ALLOCATED_BUSNUMS 0x20
-//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0
-//#define BLDCFG_BUID_SWAP_LIST 0
-//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0
-//#define BLDCFG_HTFABRIC_LIMITS_LIST 0
-//#define BLDCFG_HTCHAIN_LIMITS_LIST 0
-//#define BLDCFG_BUS_NUMBERS_LIST 0
-//#define BLDCFG_IGNORE_LINK_LIST 0
-//#define BLDCFG_LINK_SKIP_REGANG_LIST 0
-//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0
-//#define BLDCFG_USE_HT_ASSIST TRUE
-//#define BLDCFG_USE_ATM_MODE TRUE
-//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
-#define BLDCFG_S3_LATE_RESTORE FALSE
-//#define BLDCFG_USE_32_BYTE_REFRESH FALSE
-//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE
-//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance
-//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE
-//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE
-//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0
-#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
-//#define BLDCFG_CFG_ABM_SUPPORT FALSE
-//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0
-//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0
-//#define BLDCFG_MEM_INIT_PSTATE 0
-//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0
-#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY
-#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
-//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
-//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
-#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
-#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE
-#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
-#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
-#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE
-#define BLDCFG_MEMORY_POWER_DOWN TRUE
-#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
-//#define BLDCFG_ONLINE_SPARE FALSE
-//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE
-#define BLDCFG_BANK_SWIZZLE TRUE
-#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
-#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY
-#define BLDCFG_DQS_TRAINING_CONTROL TRUE
-#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
-#define BLDCFG_USE_BURST_MODE FALSE
-#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
-//#define BLDCFG_ENABLE_ECC_FEATURE TRUE
-//#define BLDCFG_ECC_REDIRECTION FALSE
-//#define BLDCFG_SCRUB_DRAM_RATE 0
-//#define BLDCFG_SCRUB_L2_RATE 0
-//#define BLDCFG_SCRUB_L3_RATE 0
-//#define BLDCFG_SCRUB_IC_RATE 0
-//#define BLDCFG_SCRUB_DC_RATE 0
-//#define BLDCFG_ECC_SYNC_FLOOD 0
-//#define BLDCFG_ECC_SYMBOL_SIZE 0
-//#define BLDCFG_1GB_ALIGN FALSE
-#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
-#define BLDCFG_UMA_ALLOCATION_SIZE 0
-#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
-#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED
-#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
-#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000
-
-/*
- * Agesa configuration values selection.
- * Uncomment and specify the value for the configuration options
- * needed by the system.
- */
-#include <AGESA.h>
-
-/* The fixed MTRR values to be set after memory initialization. */
-CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] =
-{
- { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull },
- { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull },
- { CPU_LIST_TERMINAL }
-};
-
-/* Include the files that instantiate the configuration definitions. */
-
-#include "cpuRegisters.h"
-#include "cpuFamRegisters.h"
-#include "cpuFamilyTranslation.h"
-#include "AdvancedApi.h"
-#include "heapManager.h"
-#include "CreateStruct.h"
-#include "cpuFeatures.h"
-#include "Table.h"
-#include "cpuEarlyInit.h"
-#include "cpuLateInit.h"
-#include "GnbInterface.h"
-
-/*****************************************************************************
- * Define the RELEASE VERSION string
- *
- * The Release Version string should identify the next planned release.
- * When a branch is made in preparation for a release, the release manager
- * should change/confirm that the branch version of this file contains the
- * string matching the desired version for the release. The trunk version of
- * the file should always contain a trailing 'X'. This will make sure that a
- * development build from trunk will not be confused for a released version.
- * The release manager will need to remove the trailing 'X' and update the
- * version string as appropriate for the release. The trunk copy of this file
- * should also be updated/incremented for the next expected version, + trailing 'X'
- ****************************************************************************/
-// This is the delivery package title, "BrazosPI"
-// This string MUST be exactly 8 characters long
-#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
-
-// This is the release version number of the AGESA component
-// This string MUST be exactly 12 characters long
-#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '}
-
-/* MEMORY_BUS_SPEED */
-#define DDR400_FREQUENCY 200 ///< DDR 400
-#define DDR533_FREQUENCY 266 ///< DDR 533
-#define DDR667_FREQUENCY 333 ///< DDR 667
-#define DDR800_FREQUENCY 400 ///< DDR 800
-#define DDR1066_FREQUENCY 533 ///< DDR 1066
-#define DDR1333_FREQUENCY 667 ///< DDR 1333
-#define DDR1600_FREQUENCY 800 ///< DDR 1600
-#define DDR1866_FREQUENCY 933 ///< DDR 1866
-#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency
-
-/* QUANDRANK_TYPE*/
-#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
-#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
-
-/* USER_MEMORY_TIMING_MODE */
-#define TIMING_MODE_AUTO 0 ///< Use best rate possible
-#define TIMING_MODE_LIMITED 1 ///< Set user top limit
-#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
-
-/* POWER_DOWN_MODE */
-#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
-#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
-
-// The following definitions specify the default values for various parameters in which there are
-// no clearly defined defaults to be used in the common file. The values below are based on product
-// and BKDG content, please consult the AGESA Memory team for consultation.
-#define DFLT_SCRUB_DRAM_RATE (0)
-#define DFLT_SCRUB_L2_RATE (0)
-#define DFLT_SCRUB_L3_RATE (0)
-#define DFLT_SCRUB_IC_RATE (0)
-#define DFLT_SCRUB_DC_RATE (0)
-#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
-#define DFLT_VRM_SLEW_RATE (5000)
-
-// Instantiate all solution relevant data.
-#include <PlatformInstall.h>
diff --git a/src/mainboard/amd/inagua/cmos.layout b/src/mainboard/amd/inagua/cmos.layout
deleted file mode 100644
index f9f52f7..0000000
--- a/src/mainboard/amd/inagua/cmos.layout
+++ /dev/null
@@ -1,68 +0,0 @@
-#*****************************************************************************
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2011 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#*****************************************************************************
-
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 400Mhz
-8 1 333Mhz
-8 2 266Mhz
-8 3 200Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/amd/inagua/devicetree.cb b/src/mainboard/amd/inagua/devicetree.cb
deleted file mode 100644
index 946bd59..0000000
--- a/src/mainboard/amd/inagua/devicetree.cb
+++ /dev/null
@@ -1,86 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2011 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-chip northbridge/amd/agesa/family14/root_complex
- device cpu_cluster 0 on
- chip cpu/amd/agesa/family14
- device lapic 0 on end
- end
- end
- device domain 0 on
- subsystemid 0x1022 0x1510 inherit
- chip northbridge/amd/agesa/family14
- device pci 0.0 on end # Root Complex
- device pci 1.0 on end # Internal Graphics P2P bridge, 9802 to 9806
- device pci 1.1 on end # Internal HDMI Audio
- device pci 4.0 on end # PCIE P2P bridge MXM lane 0
- device pci 5.0 off end # PCIE P2P bridge MXM lane 1
- device pci 6.0 on end # PCIE P2P bridge LAN
- device pci 7.0 on end # PCIE P2P bridge MINIPCIE SLOT1
- device pci 8.0 off end # NB/SB Link P2P bridge
- end # agesa northbridge
-
- chip southbridge/amd/cimx/sb800
- device pci 11.0 on end # SATA
- device pci 12.0 on end # OHCI USB 0-4
- device pci 12.2 on end # EHCI USB 0-4
- device pci 13.0 on end # OHCI USB 5-9
- device pci 13.2 on end # EHCI USB 5-9
- device pci 14.0 on end # SM
- device pci 14.1 on end # IDE 0x439c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x439d
- chip superio/smsc/kbc1100
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- end # kbc1100
- end #LPC
- device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
- device pci 14.5 on end # OHCI FS/LS USB
- device pci 14.6 on end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
- device pci 15.0 on end # PCIe PortA Express Card
- device pci 15.1 on end # PCIe PortB NEC USB3.0
- device pci 15.2 on end # PCIe PortC MINIPCIE SLOT2
- device pci 15.3 on end # PCIe PortD PCIE X1 SLOT
- device pci 16.0 on end # OHCI USB 10-13
- device pci 16.2 on end # EHCI USB 10-13
- register "gpp_configuration" = "4" #1:1:1:1
- register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
- end #southbridge/amd/cimx/sb800
-
- chip northbridge/amd/agesa/family14
-
- # These seem unnecessary
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- device pci 18.5 on end
- device pci 18.6 on end
- device pci 18.7 on end
-
- register "spdAddrLookup" = "
- {
- { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
- }"
-
- end # agesa northbridge
-
- end #domain
-end #northbridge/amd/agesa/family14/root_complex
diff --git a/src/mainboard/amd/inagua/dsdt.asl b/src/mainboard/amd/inagua/dsdt.asl
deleted file mode 100644
index 5496288..0000000
--- a/src/mainboard/amd/inagua/dsdt.asl
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* DefinitionBlock Statement */
-#include <arch/acpi.h>
-DefinitionBlock (
- "DSDT.AML", /* Output filename */
- "DSDT", /* Signature */
- 0x02, /* DSDT Revision, needs to be 2 for 64bit */
- OEM_ID,
- ACPI_TABLE_CREATOR,
- 0x00010001 /* OEM Revision */
- )
-{ /* Start of ASL file */
- /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
-
- #include "acpi/mainboard.asl"
-
- #include <cpu/amd/agesa/family14/acpi/cpu.asl>
-
- #include "acpi/routing.asl"
-
- Scope(\_SB) {
- /* global utility methods expected within the \_SB scope */
- #include <arch/x86/acpi/globutil.asl>
-
- Device(PCI0) {
-
- /* Describe the AMD Northbridge */
- #include <northbridge/amd/agesa/family14/acpi/northbridge.asl>
-
- /* Describe the AMD Fusion Controller Hub Southbridge */
- #include <southbridge/amd/cimx/sb800/acpi/fch.asl>
-
- /* Primary (and only) IDE channel */
- Device(IDEC) {
- Name(_ADR, 0x00140001)
- #include "acpi/ide.asl"
- } /* end IDEC */
-
- }
- } /* End Scope(_SB) */
-
- /* Contains the supported sleep states for this chipset */
- #include <southbridge/amd/common/acpi/sleepstates.asl>
-
- /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
- #include "acpi/sleep.asl"
-
- #include "acpi/gpe.asl"
-}
-/* End of ASL file */
diff --git a/src/mainboard/amd/inagua/irq_tables.c b/src/mainboard/amd/inagua/irq_tables.c
deleted file mode 100644
index a066864..0000000
--- a/src/mainboard/amd/inagua/irq_tables.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
- u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
- u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
- u8 slot, u8 rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- u32 slot_num;
- u8 *v;
-
- u8 sum = 0;
- int i;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (u8 *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = 0;
- pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1002;
- pirq->rtr_device = 0x4384;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-
- /* pci bridge */
- write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
- 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
- 0);
- pirq_info++;
-
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "write_pirq_routing_table done.\n");
-
- return (unsigned long)pirq_info;
-
-}
diff --git a/src/mainboard/amd/inagua/mainboard.c b/src/mainboard/amd/inagua/mainboard.c
deleted file mode 100644
index 83fe394..0000000
--- a/src/mainboard/amd/inagua/mainboard.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <amdblocks/acpimmio.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> /* Platform Specific Definitions */
-
-static void init_gpios(void)
-{
- /**
- * GPIO32 Pcie Device DeAssert for APU
- * GPIO25 Pcie LAN, APU GPP2
- * GPIO02 MINIPCIE SLOT1, APU GPP3
- * GPIO50 Pcie Device DeAssert for Hudson Southbridge
- * GPIO05 Express Card, SB GPP0
- * GPIO26 NEC USB3.0GPPUSB, SB GPP1
- * GPIO00 MINIPCIE SLOT2, SB GPP2
- * GPIO05 Pcie X1 Slot, SB GPP3
- */
-
- /* Multi-function pins switch to GPIO0-35, these pins are shared with
- * PCI pins, make sure Hudson PCI device is disabled.
- */
- RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1);
-
- /* select IOMux to function1/2, corresponds to GPIO */
- RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG32, AccWidthUint8, ~(BIT0 | BIT1), 1);
- RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG50, AccWidthUint8, ~(BIT0 | BIT1), 2);
-
-
- /* output low */
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG32, AccWidthUint8, ~(0xFF), 0x48);
- RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG50, AccWidthUint8, ~(0xFF), 0x48);
-}
-
-
-/**********************************************
- * Enable the dedicated functions of the board.
- **********************************************/
-static void mainboard_enable(struct device *dev)
-{
- printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
-
- /* Inagua mainboard specific setting */
- init_gpios();
-
- /*
- * Initialize ASF registers to an arbitrary address because someone
- * long ago set things up this way inside the SPD read code. The
- * SPD read code has been made generic and moved out of the board
- * directory, so the ASF init is being done here.
- */
- pm_write8(0x29, 0x80);
- pm_write8(0x28, 0x61);
-}
-
-struct chip_operations mainboard_ops = {
- .enable_dev = mainboard_enable,
-};
diff --git a/src/mainboard/amd/inagua/mptable.c b/src/mainboard/amd/inagua/mptable.c
deleted file mode 100644
index 1b4e64a..0000000
--- a/src/mainboard/amd/inagua/mptable.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/smp/mpspec.h>
-#include <arch/io.h>
-#include <arch/ioapic.h>
-#include <string.h>
-#include <stdint.h>
-#include <southbridge/amd/cimx/sb800/SBPLATFORM.h>
-
-u8 intr_data[] = {
- [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
- [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,
- [0x18] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,
- [0x28] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,
- [0x38] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- [0x40] = 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,
- [0x48] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- [0x50] = 0x10,0x11,0x12,0x13
-};
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- int bus_isa;
-
- /*
- * By the time this function gets called, the IOAPIC registers
- * have been written so they can be read to get the correct
- * APIC ID and Version
- */
- u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
- u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
- memcpy(mc->mpc_oem, "AMD ", 8);
-
- smp_write_processors(mc);
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
- /* I/O APICs: APIC ID Version State Address */
- smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
-
- u8 byte;
-
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
-
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
-
- mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
-
- /* PCI interrupts are level triggered, and are
- * associated with a specific bus/device/function tuple.
- */
-#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin))
-
- /* APU Internal Graphic Device*/
- PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
- PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
-
- //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
- /* Southbridge HD Audio: */
- PCI_INT(0x0, 0x14, 0x2, 0x12);
-
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
-
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
-
- /* on board NIC & Slot PCIE. */
-
- /* PCI slots */
- struct device *dev = pcidev_on_root(0x14, 4);
- if (dev && dev->enabled) {
- u8 bus_pci = dev->link_list->secondary;
- /* PCI_SLOT 0. */
- PCI_INT(bus_pci, 0x5, 0x0, 0x14);
- PCI_INT(bus_pci, 0x5, 0x1, 0x15);
- PCI_INT(bus_pci, 0x5, 0x2, 0x16);
- PCI_INT(bus_pci, 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_pci, 0x6, 0x0, 0x15);
- PCI_INT(bus_pci, 0x6, 0x1, 0x16);
- PCI_INT(bus_pci, 0x6, 0x2, 0x17);
- PCI_INT(bus_pci, 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_pci, 0x7, 0x0, 0x16);
- PCI_INT(bus_pci, 0x7, 0x1, 0x17);
- PCI_INT(bus_pci, 0x7, 0x2, 0x14);
- PCI_INT(bus_pci, 0x7, 0x3, 0x15);
- }
-
- /* PCIe PortA */
- PCI_INT(0x0, 0x15, 0x0, 0x10);
- /* PCIe PortB */
- PCI_INT(0x0, 0x15, 0x1, 0x11);
- /* PCIe PortC */
- PCI_INT(0x0, 0x15, 0x2, 0x12);
- /* PCIe PortD */
- PCI_INT(0x0, 0x15, 0x3, 0x13);
-
- /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
- IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/amd/inagua/platform_cfg.h b/src/mainboard/amd/inagua/platform_cfg.h
deleted file mode 100644
index d39a3ab..0000000
--- a/src/mainboard/amd/inagua/platform_cfg.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-
-#ifndef _PLATFORM_CFG_H_
-#define _PLATFORM_CFG_H_
-
-/**
- * @def BIOS_SIZE
- * BIOS_SIZE_{1,2,4,8,16}M
- *
- * In SB800, default ROM size is 1M Bytes, if your platform ROM
- * bigger than 1M you have to set the ROM size outside CIMx module and
- * before AGESA module get call.
- */
-#ifndef BIOS_SIZE
-#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1)
-#endif /* BIOS_SIZE */
-
-/**
- * @def SPREAD_SPECTRUM
- * @brief
- * 0 - Disable Spread Spectrum function
- * 1 - Enable Spread Spectrum function
- */
-#define SPREAD_SPECTRUM 0
-
-/**
- * @def SB_HPET_TIMER
- * @brief
- * 0 - Disable hpet
- * 1 - Enable hpet
- */
-#define HPET_TIMER 1
-
-/**
- * @def USB_CONFIG
- * @brief bit[0-6] used to control USB
- * 0 - Disable
- * 1 - Enable
- * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0
- * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1
- * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2
- * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3
- * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4
- * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5
- * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6
- */
-#define USB_CONFIG 0x7F
-
-/**
- * @def PCI_CLOCK_CTRL
- * @brief bit[0-4] used for PCI Slots Clock Control,
- * 0 - disable
- * 1 - enable
- * PCI SLOT 0 define at BIT0
- * PCI SLOT 1 define at BIT1
- * PCI SLOT 2 define at BIT2
- * PCI SLOT 3 define at BIT3
- * PCI SLOT 4 define at BIT4
- */
-#define PCI_CLOCK_CTRL 0x1F
-
-/**
- * @def SATA_CONTROLLER
- * @brief INCHIP Sata Controller
- */
-#define SATA_CONTROLLER CIMX_OPTION_ENABLED
-
-/**
- * @def SATA_MODE
- * @brief INCHIP Sata Controller Mode
- * NOTE: DO NOT ALLOW SATA & IDE use same mode
- */
-#define SATA_MODE CONFIG_SB800_SATA_MODE
-
-/**
- * @brief INCHIP Sata IDE Controller Mode
- */
-#define IDE_LEGACY_MODE 0
-#define IDE_NATIVE_MODE 1
-
-/**
- * @def SATA_IDE_MODE
- * @brief INCHIP Sata IDE Controller Mode
- * NOTE: DO NOT ALLOW SATA & IDE use same mode
- */
-#define SATA_IDE_MODE IDE_LEGACY_MODE
-
-/**
- * @def EXTERNAL_CLOCK
- * @brief 00/10: Reference clock from crystal oscillator via
- * PAD_XTALI and PAD_XTALO
- *
- * @def INTERNAL_CLOCK
- * @brief 01/11: Reference clock from internal clock through
- * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
- */
-#define EXTERNAL_CLOCK 0x00
-#define INTERNAL_CLOCK 0x01
-
-/* NOTE: inagua have to using internal clock,
- * otherwise can not detect sata drive
- */
-#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
-
-/**
- * @def SATA_PORT_MULT_CAP_RESERVED
- * @brief 1 ON, 0 0FF
- */
-#define SATA_PORT_MULT_CAP_RESERVED 1
-
-
-/**
- * @def AZALIA_AUTO
- * @brief Detect Azalia controller automatically.
- *
- * @def AZALIA_DISABLE
- * @brief Disable Azalia controller.
-
- * @def AZALIA_ENABLE
- * @brief Enable Azalia controller.
- */
-#define AZALIA_AUTO 0
-#define AZALIA_DISABLE 1
-#define AZALIA_ENABLE 2
-
-/**
- * @brief INCHIP HDA controller
- */
-#define AZALIA_CONTROLLER AZALIA_AUTO
-
-/**
- * @def AZALIA_PIN_CONFIG
- * @brief
- * 0 - disable
- * 1 - enable
- */
-#define AZALIA_PIN_CONFIG 1
-
-/**
- * @def AZALIA_SDIN_PIN
- * @brief
- * SDIN0 is define at BIT0 & BIT1
- * 00 - GPIO PIN
- * 01 - Reserved
- * 10 - As a Azalia SDIN pin
- * SDIN1 is define at BIT2 & BIT3
- * SDIN2 is define at BIT4 & BIT5
- * SDIN3 is define at BIT6 & BIT7
- */
-//#define AZALIA_SDIN_PIN 0xAA
-#define AZALIA_SDIN_PIN 0x2A
-
-/**
- * @def GPP_CONTROLLER
- */
-#define GPP_CONTROLLER CIMX_OPTION_ENABLED
-
-/**
- * @def GPP_CFGMODE
- * @brief GPP Link Configuration
- * four possible configuration:
- * GPP_CFGMODE_X4000
- * GPP_CFGMODE_X2200
- * GPP_CFGMODE_X2110
- * GPP_CFGMODE_X1111
- */
-#define GPP_CFGMODE GPP_CFGMODE_X1111
-
-/**
- * @def NB_SB_GEN2
- * 0 - Disable
- * 1 - Enable
- */
-#define NB_SB_GEN2 TRUE
-
-/**
- * @def SB_GPP_GEN2
- * 0 - Disable
- * 1 - Enable
- */
-#define SB_GPP_GEN2 TRUE
-
-/**
- * @def SB_GPP_UNHIDE_PORTS
- * TRUE - ports visible always, even port empty
- * FALSE - ports invisible if port empty
- */
-#define SB_GPP_UNHIDE_PORTS FALSE
-
-/**
- * @def GEC_CONFIG
- * 0 - Enable
- * 1 - Disable
- */
-#define GEC_CONFIG 0
-
-#endif
diff --git a/src/mainboard/amd/inagua/romstage.c b/src/mainboard/amd/inagua/romstage.c
deleted file mode 100644
index 43d9da9..0000000
--- a/src/mainboard/amd/inagua/romstage.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <northbridge/amd/agesa/state_machine.h>
-#include <superio/smsc/kbc1100/kbc1100.h>
-#include <sb_cimx.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
-
-void board_BeforeAgesa(struct sysinfo *cb)
-{
- sb_Poweron_Init();
- kbc1100_early_init(0x2e);
- kbc1100_early_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-}
diff --git a/src/mainboard/asrock/e350m1/platform_cfg.h b/src/mainboard/asrock/e350m1/platform_cfg.h
index 5e93dc1..c245251 100644
--- a/src/mainboard/asrock/e350m1/platform_cfg.h
+++ b/src/mainboard/asrock/e350m1/platform_cfg.h
@@ -111,9 +111,6 @@
#define EXTERNAL_CLOCK 0x00
#define INTERNAL_CLOCK 0x01
-/* NOTE: inagua have to using internal clock,
- * otherwise can not detect sata drive
- */
#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
/**
diff --git a/src/mainboard/gizmosphere/gizmo/BiosCallOuts.c b/src/mainboard/gizmosphere/gizmo/BiosCallOuts.c
index 233c40f..864c6c4b 100644
--- a/src/mainboard/gizmosphere/gizmo/BiosCallOuts.c
+++ b/src/mainboard/gizmosphere/gizmo/BiosCallOuts.c
@@ -36,7 +36,6 @@
/* Call the host environment interface to provide a user hook opportunity. */
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
- // Unlike AMD/Inagua, this board is unable to vary the RAM voltage.
// Make sure the right speed settings are selected.
((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
return AGESA_SUCCESS;
diff --git a/src/mainboard/gizmosphere/gizmo/platform_cfg.h b/src/mainboard/gizmosphere/gizmo/platform_cfg.h
index c56b537..548fc0e 100644
--- a/src/mainboard/gizmosphere/gizmo/platform_cfg.h
+++ b/src/mainboard/gizmosphere/gizmo/platform_cfg.h
@@ -115,9 +115,6 @@
#define EXTERNAL_CLOCK 0x00
#define INTERNAL_CLOCK 0x01
-/* NOTE: inagua have to using internal clock,
- * otherwise can not detect sata drive
- */
#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
/**
diff --git a/src/mainboard/pcengines/apu1/platform_cfg.h b/src/mainboard/pcengines/apu1/platform_cfg.h
index 7172e82..0eb24f8 100644
--- a/src/mainboard/pcengines/apu1/platform_cfg.h
+++ b/src/mainboard/pcengines/apu1/platform_cfg.h
@@ -114,9 +114,6 @@
#define EXTERNAL_CLOCK 0x00
#define INTERNAL_CLOCK 0x01
-/* NOTE: inagua have to using internal clock,
- * otherwise can not detect sata drive
- */
#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
/**
To view, visit change 38117. To unsubscribe, or for help writing mail filters, visit settings.